What is this warning message?

In my MyVewController.h file, I have a function called:
-(void) loadDefaults:(BOOL)saveFilter saveImage:(BOOL)saveImage;
In my MyVewController.m file, I defined:
-(void) loadDefaults:(BOOL)loadFilter loadImage:(BOOL)loadImage
NSLog(@"Load defaults");
Also in my MyVewController.m, I called the function as:
[self saveDefaults:YES saveImage:NO];
The compiler always complains that:
"MyVewController may not respond to '-loadDefaults:loadImage:'
{Message without a matching method signature will be assumed to return 'id' and accept '...' as arguments.
What does this mean?
thanks,
fm

fireman888 wrote:
Sorry, I meant to post:
MyViewController.h:
-(void) loadDefaults:(BOOL)saveFilter saveImage:(BOOL)saveImage;
MyVewController.m:
-(void) loadDefaults:(BOOL)loadFilter loadImage:(BOOL)loadImage
NSLog(@"Load defaults");
-(void) myMainFunction
[self loadDefaults:YES saveImage:NO];
The compiler always complains at line "[self loadDefaults:YES saveImage:NO];" that:
"MyVewController may not respond to '-loadDefaults:loadImage:'
{Message without a matching method signature will be assumed to return 'id' and accept '...' as arguments.
Two things. First, when dealing with either a compiler or asking for help here, you must be very precise and exact. Close just isn't good enough. What method are you defining and calling? It is "loadDefaults:loadImage:" or "loadDefaults:saveImage:". Until you get that sorted out, you are just spinning your wheels.
Once you do get the correct method name, if you are still getting the compiler message, make sure you are "#import"-ing MyViewController.h in the .m file where you call that method.

Similar Messages

  • What does this warning Message mean?

    Currently my company has two licenses for RoboHelp8 both are installed locally on PC's.   We are attempting to install and use SourceControl so two people can work on the same project at the same time.   Our IT guy downloaded a trial copy of RH8  without a serial number to play with to make sure the Source Control is working properly.  He tried to open a project that was completed using  RH8 and got this message.  All instances are updated.
    Can anyone help me with this and suggest a method that will allow him to test the Source Control given our scenario above?
    Thank you in advance for your help.

    Updates can be obtained from Adobe - Support : RoboHelp Support Center : Service Releases
    Provided the project you are trying to open has not been opened in Rh11, then after applying the patches it should open in 8. It is important the Rh8 patches are applied before opening any projects as one of them fixed a particularly nasty bug.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • HT203200 Whenever i open iTunes it tells me that 2 of my downloads cannot be completed because the file may be corrupted. I cannot get rid of this message or complete the downloads. Other downloads worked. What can i do to get rid of this warning message

    Whenever i open iTunes it tells me that 2 of my downloads cannot be completed because the file may be corrupted. I cannot get rid of this message or complete the downloads. Other downloads worked. What can i do to get rid of this warning message or complete the downloads?

    Welcome to the Apple Community.
    Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

  • HT1386 I am trying to sinc my iPhone with my iTunes to get my music on my phone and i keep getting an error message 42001 pop up when i attempt to sync what is this error message and what do i do to fix this problem??

    I am attempting to sync my phone with iTunes and I keep getting an error message 42001 so my phone can not sync with iTunes... What is this error message and what can I do to fix this problem and sync my phone to iTunes?

    Dear Apple team,
    I recently bought an iphone3GS from USA and jail broke it. Since I heard the there are lots of disadvantages I thought to unlock it officially through the original owner (in copy). He assisted me and confirmed that he unlocked it with AT& T (See the attachment). According to the instructions I restored the phone. But it is not activating with “Activation server is currently not available, please try again or try with iTunes”
    When I try with iTunes , it says “you haven’t inserted a SIM” even though I insert the original AT&T SIM.
    My current location is Sri Lanka ,so don’t have any apple support.
    Please help me to be a good fan of apple.

  • What does this Bridge message mean?

    I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
    OLSException in OLS Adapter Startup
    /OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
    Should I be worried?
    (I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
    What does this Bridge message mean?

    Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
    I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum.

  • What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found:  /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

    When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

    It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder.  You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again.  This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do.  The article on how to do this is here. (http://www.apple.com/macosx/recovery/)  I have had to do this before and it works like a charm.  It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

  • What does this error message mean? disc recording not found

    What does this error message mean? disc recording not found

    Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • TS2753 Unknown error 23.   What is this error message all about ?

    Unknown error 23.   What is this error message all about ?
    My phone not starting up. When I updated Itunes - it came up with that error message.
    Cheers
    Vinay

    core audio error mssg -39?
    core audio is telling you it needs a break and is "goin' down the pub for a guinness".
    the tricky one is: ca error -39bs. where it asks you to shout the guinness.

  • What does this error message when I try to do updates mean? And how can I fix it? Thanks.   The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    What does this error message when I try to do updates mean? And how can I fix it? Thanks.   (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    James
    maverick 10.9.1

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • TS1846 What does this error message mean?

    What does this error message mean? I am trying to burn a project to DVD...
    Formatting was not successful.  Layer 0 exceeds the maximum layer size allowed.  Please choose a suitable marker location that will support this condition.

    The project is 1:22:30  - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

  • TS1702 0xE8000004-what does this error message mean?

    0xE8000004-what does this error message mean?  I get it when trying to sync my Garmin USA app.

    See http://support.apple.com/kb/TS3221.

  • What does this error message mean?  MFMessageErrorDomain error 1028.

    What does this error message mean? 
    MFMessageErrorDomain error 1028.
    I can't seem to delete a message from my mailbox.  The above error message comes up every time and the message then reappears in my inbox.

    Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
    From the Mail menu bar, select
    Mail > Preferences > Accounts > Advanced
    From the menu labeled
    Keep copies of messages for offline viewing
    choose
    Don't keep copies of any messages
    Close the window and save the change. Relaunch Mail and test.

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • Can anybody identify this warning message?

    It always appear when I'm creating a logical port on my SolMan system. What message should I get from it? Should I do anything to my web service?
    Thank you!

    This is a known issue.
    Contact [email protected] and ask for "Combined muxer" patch.
    Kumar
    Anirudh wrote:
    Hi,
    I am getting following message on my console :
    <Sep 10, 2002 7:12:38 PM GMT+08:00> <Warning> <Posix Performance Pack> <Got exception
    for fd: '123' with no corresponding table entry>
    <Sep 11, 2002 12:40:48 AM GMT+08:00> <Warning> <Posix Performance Pack> <Got exception
    for fd: '151' with no corresponding table entry>
    I have deployed the WL server on HP-UX 11.0 and wlserver version is 6.1 sp2. Could
    anybody explain the warning message ?
    TIA
    Anirudh

  • What does this error message mean? "An unexpected error occurred (error code -6584). It arises when I open my Time Capsule icon.

    I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule.  Thats when I learned that Time Capsule stopped backing up back in January.  So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message.  What does it mean and how can I fix the problem?

    The backup is corrupted in some way.. you need to verify it.
    The error is common enough but there seems to be a range of solutions.
    Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
    Look particularly for the posts by Pondini.
    And check his troubleshooting for methods of doing things like verify.
    http://pondini.org/TM/Troubleshooting.html
    A5

Maybe you are looking for

  • HT201210 backup cant be saved to computer when trying to update to new iOS

    Can anyone advise what i can do please. I have an iPhone 4s and am trying to update to iOS 5.1.1. Firstly i had error 3194 and so updated iTunes to the newest version and now after extracting updating software and attempting to backup the phone to my

  • October 2013 CC Release: what's coming

    Hello everyone, we are releasing new versions of Prelude, Premiere Pro, After Effects, SpeedGrade and AME on October 15th via Creative Cloud. If you want to get an overview of what's coming please head over to the landing page we created for IBC: htt

  • Does System Preferences support brightness control via DDC/CI with Dell Monitors?

    I had a Dell 21.5" monitor, which was previously connected to a Windows PC via its DVI port, which has no problem with DDC/CI. My question is, through Apple's adapter, can I control a non-Apple display within System Prefrences

  • Calling PL/SQL procedures from a Windows CMD script

    Hello, I am writing a Windows CMD script. From this script I want to call procedures from a PL/SQL package which selects, inserts or deletes rows from the database. How do I go about logging into the database from the cmd script and calling PL/SQL pr

  • SQL Server data tools 71561

    I'm tearing my hair out with error 71561 in relation to views referencing objects in a different database, I have added the referenced database in as a dacpac but this has made no difference whatsoever, despite the referenced objects being inside the