What is use of Hyperlinks and Pdfs in srm-mdm catalog??

Hello friends,
I have added one Pdf file in data manager, in this, it is showing no thumbnail. But in EBP it is not showing any Pdf file. can suggest how to show this Pdf loaded file in EBP(Enterprise Buyer Professional). i dont know whats the purpose and how to use hyperlinks in srm-mdm catalog. Also why there is MIME types and Hyperlinks type look up tables in srm-mdm catalog repository. how to use them?
Please do suggest........
Regards,
Mandy

Hi Mandy,
You can do this:
On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
Alternatively,
You can also find some information about it on https://service.sap.com/srm within this link on the left frame go into
mySAP Supplier Relationship Mgmt --> mySAP SRM in Detail --> SRM 5.0 --> Catalog Content Management --> SRM-MDM Catalog and you will get the document.
Hope it helped.
Regards,
Krutarth

Similar Messages

SRM-MDM-Catalog and XI using HTTP

I need to do a integration between SRM 5 and SRM-MDM-Catalog using XI.
I imported the SRM-MDM-Catalog packages into the XI and I saw that all connections with MDM are using FTP in the comunnication channel template.
Is it possible to do connections for MDM using http or soap?

As far as I know using Files is how XI interacts with MDM. All scenarios I have seen on SDN have been with File adapter being used on MDM 's side.
Maybe there is a way , am watching this thread as well.
Regards
Bhavesh

SRM-MDM-Catalog and XI

I need to do a integration between SRM 5 and SRM-MDM-Catalog using XI.
I imported the SRM-MDM-Catalog packages into the XI and I saw that all connections with MDM are using FTP in the comunnication channel template.
Is it possible to do connections for MDM using http or soap?

As far as I know using Files is how XI interacts with MDM. All scenarios I have seen on SDN have been with File adapter being used on MDM 's side.
Maybe there is a way , am watching this thread as well.
Regards
Bhavesh

Whats the use of doget and dopost

hi
whats the use of doget and dopoast when same work can be done by sevice alone?
Message was edited by:
pooja_k_online

Try looking at the Tomcat implementation of HttpServlet.service() method. I have pasted it below, if you look at the service() method all it does is to check for the method and call the appropriate method. It is not recommended to override the service method. It is a good practice to only override the getXXX() methods.
protected void service(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
String method = req.getMethod();
if(method.equals("GET"))
long lastModified = getLastModified(req);
if(lastModified == -1L)
doGet(req, resp);
} else
long ifModifiedSince = req.getDateHeader("If-Modified-Since");
if(ifModifiedSince < (lastModified / 1000L) * 1000L)
maybeSetLastModified(resp, lastModified);
doGet(req, resp);
} else
resp.setStatus(304);
} else
if(method.equals("HEAD"))
long lastModified = getLastModified(req);
maybeSetLastModified(resp, lastModified);
doHead(req, resp);
} else
if(method.equals("POST"))
doPost(req, resp);
else
if(method.equals("PUT"))
doPut(req, resp);
else
if(method.equals("DELETE"))
doDelete(req, resp);
else
if(method.equals("OPTIONS"))
doOptions(req, resp);
else
if(method.equals("TRACE"))
doTrace(req, resp);
} else
String errMsg = lStrings.getString("http.method_not_implemented");
Object errArgs[] = new Object[1];
errArgs[0] = method;
errMsg = MessageFormat.format(errMsg, errArgs);
resp.sendError(501, errMsg);
}

What format used for exporting and read 1920 * 1080 HD windows media?

hello,
what format used for exporting and read 1920 * 1080 hd in windows media ?
i try many format and windows media refused to read ...
merci thanks
Yves

thanks, sorry, but i want produce small clips for many caritatives organisms their computer have only Windows media ....and no many used of internet...
this morning, i try format windows media , hdtv 25 i/s high quality ...i'll try read it on another computer ...on my computer, it's ok ....

Use of Hyperlink in SRM MDM Catalog

Hii Experts,
Can somebody help me with images upload using hyperlink table in SRM MDM catalog. Images are maintained in central repository
Regards,
Poonam Kanade

Hi Poonam,
the format of the URL should be as follows
"file://"
For example: "file://pwdf123/share/abc.jpg"
Regards,
Tamá

Is use of flat file in SRM-MDM catalog search UI possible ?

Hello,
When user looks for materials inside SRM-MDM catalog (using search user interface), search is done manually with free form or drill down search.
Then, among the search result, user has to select items he wants to add to his shopping cart and finally transfer those items from his shopping cart overview inside SRM.
Is it possible to automate this user selection using for exemple a flat file uploading (or any other way you could know) ?
This flat file will have material number (or service), supplier code and quantity (no more information).
The aim of the request is to help requester to not have to select each item one by one (in the search result) knowing that :
- SC will have more than a hundred items,
- delivery time and price (for example) must be checked in MDM, being the master data reference
- materials (or service) to order are received by requester via a flat file without any information about prices, so i cannot upload my flat file directly into SRM because file missing data must come from MDM.
With this process, user should have only to transfer items automatically selected.
Could you please share your advises ?
We use SAP MDM 5.5.
Regards.
Laurent.

Hello Masa,
Masayuki Sekihara wrote:
A vendor look at buyer stock information like VMI and fill stock weekly base. So the vendor sends material number and quantity information as flat file to buyer. Buyer should create SC from flat file and price information should fetch from catalog.
Yes, your are correct: example you gave corresponds to process for my SC uploading.
Regards.
Laurent.

SRM-MDM Catalog latest version and SRM 6.0

Hi MDM Users,
could anybody tell me when will be released SRM-MDM Catalog 2.0? As I know, latest version is 1.0 Patch03.
Do you have any information about release of SRM 6.0?
Thanks and regards,
Álmos
Message was edited by:
Álmos Paksi

Hi Álmos,
The SRM-MDM Catalog will be releases on July 2nd 2007.
This catalog version will also be part of SRM 6.0.
Best Regards,
Daniela Schweizer
SRM Solution Management

How to use the Masks in SRM-MDM catalog?

Hi Expert,
We are at SRM-MDM catalog 3.0.
There have two types of SRM contracts were transferd to one MDM catalog repository, and we config two different number range for these contract types. We will creat two web services in SRM IMG, only the same number ramge of the contracts could diaplay in one web service.
As this requirement, may be the MDM function Masks could be a solution I think. But when I try to separate the contracts with two masks in MDM Data Manager, I have no idea that how could I set the key filter with the contract number fields.
Could every expert tell me how could i set the Masks as this situation?

Hi
Have you assigned the masks created in data manager to some role in Console(Console-Roles TableRole1-Table and fields tabMask--add Mask 1 say)
Once the mask is assigned to the role then only the role can see records pertaining to that mask else it can see all the records in the repository.
Regards
Nisha

FAQ: What features use the GPU and how do I troubleshoot GPU issues?

Photoshop CS6 GPU FAQ
Introduction
This document provides a quick reference guide to video card usage in Photoshop. Some features require a compatible video card to work; if the video card or its driver is defective or unsupported, those features will not work at all. Other features use the video card for acceleration and if the card or driver is defective those features will run more slowly.
Mercury Graphics Engine
The Mercury Graphics Engine (MGE) represents features that use video card, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
MGE is new to Photoshop CS6, and uses both the OpenGL and OpenCL frameworks. It does not use the proprietary CUDA framework from nVidia.
In order to use MGE, you must have a supported video card and updated driver. If you do not have a supported card, performance will be degraded. In most cases the acceleration is lost and the feature runs in the normal CPU mode. However, there are some features that will not work without a supported video card.
GPU features added in Photoshop CS6
Adaptive Wide Angle Filter (compatible video card required)
Liquify (accelerated by compatible video card with 512MB VRAM, GPU mode unavailable on Windows XP)
Oil Paint (compatible video card required)
Warp and Puppet Warp (accelerated by compatible video card, GPU mode unavailable on Windows XP)
Field Blur, Iris Blur, and Tilt/Shift (accelerated by compatible video
card supporting OpenCL, GPU mode unavailable on Windows XP)
Lighting Effects Gallery (compatible video card required with 512MB
VRAM, unavailable on Windows XP)
New 3D enhancements (3D features in Photoshop require a compatible video card with 512MB VRAM, unavailable on Windows XP):
Draggable Shadows
Ground plane reflections
Roughness
On-canvas UI controls
Ground plane
Liqht widgets on edge of canvas
IBL (image based light) controller
* Note that all 3D features are unavailable on Windows XP in Photoshop CS6
GPU features added in previous versions of Photoshop
Scrubby Zoom. See Zoom continuously
Heads Up Display (HUD) color picker. See Choose a color while painting
Color sampling ring. Choose colors with the Eyedropper tool
Brush dynamic resize and hardness control. See Resize or change hardness of cursors by dragging
Bristle Brush tip previews. Bristle tip shape options
Rule of thirds crop grid overlay. Crop images
Zoom enhancements. Smooth display at all zoom levels and temporary zoom. See Zoom continuouslyTemporarily zoom an image
Animated transitions for one-stop zoom.
Flick-panning.
Rotate the canvas. Use the Rotate View tool
View nonsquare pixel images. Adjust pixel aspect ratio
Pixel grid. Hide the pixel grid
Adobe Color Engine (ACE).
Draw Brush tip cursors. Resize or change hardness of cursors by dragging
Adobe Bridge GPU features
Preview panel
Full-screen preview
Review mode
See Preview and compare images in Adobe Bridge CS6 Help for information on all of these features.
GPU/OpenGL preferences in Photoshop CS6
The advantages of using a compatible video card (GPU) with Photoshop are that you can experience better performance and more features. Problems can occur if you have an older video card with limited VRAM or if you use other programs at the same time as Photoshop that use the GPU.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, make sure Use Graphics Processor is selected in GPU Settings.
Click Advanced Settings and specify the following options:
Mode > Basic
Mode > Normal
Mode > Advanced Provides the benefits of Normal mode as well as newer OpenGL advances that can result in improved performance.
Use Graphics Processor to Accelerate Computation
Use OpenCL Uses the GPU to accelerate the new blur filters (Field Blur, Iris Blur, and Tilt-Shift) – OpenCL will only be available on newer GPUs that support OpenCL v1.1 or higher
Anti-Alias Guides And Paths Allows the GPU hardware to smooth the edges of drawn guides and paths.
30 Bit Display (Windows only) Allows Photoshop to display 30 bit data directly to screen on video cards that support it
Quick GPU Troubleshooting Steps
You can experience problems such as artifacts, errors, and crashes if there are incompatibilities between Photoshop and the display components that access the GPU.
If you experience crashes, incorrectly rendered windows or objects, redraw issues, or performance issues while running Photoshop, first determine whether OpenGL is causing the problem.
Turn off OpenGL.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, uncheck Use Graphics Processor. Click OK.
Restart Photoshop, and perform the same function.
If the problem recurs while OpenGL Drawing is disabled, OpenGL is not the cause. For additional troubleshooting, see Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x (cpsid_82414).
If the problem resolves, proceed with the rest of the troubleshooting steps to fix OpenGL.
Make sure that you're using the latest update of Photoshop.Updates fix bugs and issues.
Update the display driver.Updated display drivers can fix many issues, such as crashing, incorrectly rendered objects, and performance problems. Determine what video card you have and go directly to the manufacturer's website (nVidia or ATI/AMD) and download the latest driver. (Note: Simply doing a Windows Update is does not guarantee you are using the latest driver. You must go directly to the nVideo or ATI/AMD websites to get the absolute latest driver.) After you update your driver, turn on Use Graphics Processor in Photoshop preferences.
Reset preferences.
Resetting preferences returns OpenGL settings to their default status. Reset Photoshop preferences by pressing and holding Shift+Ctrl+Alt (Windows) or Shift+Option+Command (Mac OS) immediately after you start Photoshop.
Click Yes when asked if you want to delete the Adobe Photoshop Settings File.
Retry the function that caused the problem.
Change the OpenGL mode to Basic.
Setting the OpenGL mode to Basic uses the least amount of GPU memory and the most basic GPU feature set.
Close all documents.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, click the GPU Settings Advanced Settings button.
Choose Mode > Basic
Restart Photoshop.
If this solution resolves the problem, switch to Normal mode. See if the issue recurs. If the issue recurs, return to Basic mode.
Note: If you’re changing GPU preferences to troubleshoot a problem, re-launch Photoshop after each change.
If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems with GPU accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.
Check your Cache Levels setting.
If you've set your Cache Levels to 1 in Photoshop preferences, you can experience performance issues with GPU features. Reset Cache Levels to the default setting, which is 4.
Choose Edit > Preferences > Performance (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, choose Cache Levels > 4.
The GPU Sniffer
To help guard against Photoshop crashes related to bad GPU hardware or drivers, Photoshop employs a small program called the GPU Sniffer. Every time Photoshop is launched, Photoshop launches the sniffer. The sniffer runs rudimentary tests of the GPU and reports the results to Photoshop. If the sniffer crashes or reports a failure status to Photoshop, Photoshop will not use the GPU. The Use Graphics Hardware checkbox in the Performance panel of the Preferences will be unchecked and disabled.
The first time the sniffer fails, Photoshop will display a dialog indicating that it has detected a problem with the GPU. On subsequent launches the dialog will not appear unless the Photoshop preferences are reset.
If the user corrects the problem, either by replacing the video card or by updating the driver, then the sniffer will pass on the next launch and the Use Graphics Hardware checkbox will be enabled and returned to its previous state (enabled or disabled).
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. While the minimum amount of VRAM supported on video cards for Photoshop CS6 is 256MB, some features require 512MB of VRAM to be enabled.
Note: Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000
AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000
Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in CS6 – some basic GL functionality may be available for both these cards.
Note: 3Dand some Open GL features are disabled on Windows XP, as stated on : http://labs.adobe.com/technologies/photoshopcs6/

I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

PDF and Hyperlinks in SRM-MDM Catalog

Hello friends,
I have done all the prerequisites that are needed in datamanager to upload the PDF's and Hyperlinks but the problem is whenever i see my catalog's search UI in that I am unable to see all the PDF links and even hyperlinks.
Please do suggest........
Regards Dollar Man

Hello Dollar man,
On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
Give points if it is aHelpful answer
Regards,
Chinmoy

Whats the use of read_text and save_text in sapscript

in the sap script we have standard texts so10 by using this we can use large texts then wats the use of those function modules.
how to change the standard sap script bu using subroutine.can any one give brief idea where to pass parameters in subroutine in program or else in form.

hi sarath,
read_text and save_text
check this thread..
Re: Read_text and save_text
how to change the standard sap script bu using subroutine.can any one give brief idea where to pass parameters in subroutine in program or else in form.
: PERFORM MY_FORM IN PROGRAM ZPROGRAM
/: USING &VAR1&
/: USING &VAR2&
/: USING &VAR3&
/: USING &VARN&
/: CHANGING &VAR_OUT1&
/: CHANGING &VAR_OUTN&
in program zprogram.
FORM MY_FORM tables in_tab structure itcsy
out_tab structure itcsy.
data: varn like ....
read table in_tab with key name = 'VARN'.
if sy-subrc = 0.
move in_tab-value to varn.
endif.
read table out_tab with key name = 'VAR_OUTN'.
if sy-subrc = 0.
move <value> to ot_tab-value.
modify out_tab index sy-tabix.
endif.
ENDFORM.
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/803279454211d189710000e8322d00/frameset.htm
Message was edited by: Priya

HT3275 This is the message I get when My Time Capsule tells me why it can't perform the back up. How do I figure out what is using this file, and stop it

The backup disk image “/Volumes/Leslie Iversen's Time Capsu/Iversens' iMac.sparsebundle” is already in use. Thanks.

See Time Machine -- Troubleshooting by forum expert Pondini:
http://pondini.org/TM/Troubleshooting.html
#C12 is the item that you need to try to correct a bug in the Lion and Mountain Lion operating system.

Webi hyperlink and PDF

Hi,
I would like to know if there is a way to remove the hyperlinks defined in webi, when the report is exported to PDF?
THanks,
Gabriel

Change Object property : "Read cell content as" to Text before exporting to PDF.
Thank You!!

I am using Lightroom 3 and need to access a catalog I created with a trial version of Lightroom 4.

I need to access a catalog I created with a trial version of Lightroom 4. I am currently using Lightroom 3. Can someone help me find a way to get my images from this catalog? I don't want to upgrade at this point as I am running on a mid 2007 iMac and would need to buy new RAM, upgrade my OS, etc.... I would rather wait and spend the money on a new system when I'm ready.

Hi Rikk,
I just saw your answer to Deborah,
Does this mean catalogs not backward compatable in regards to metadata and keywords as well?
I am working on a giant archiving project here in India. The main system here is a Mac G5 Tower at 10.6.8, and it's running LR 3.2. I have my MacBook Air here, running Mavericks and LR 4.4.1.
I want to take the archive catalog OFF of LR 3.2, put it on the Air, running 4.4.1 - then ADD metadata and keywords to the catalog images while on the Air and THEN re-install/import/export/etc the catalog back to the main tower LR 3.2 with out starting a huge problem of version/upgrades/etc. That way another person can be using the tower to scan while I do keywords.
I have only a week more here for this project. If anyone knows asap would be great. Thanks in advance.
Barbara

What is use of Hyperlinks and Pdfs in srm-mdm catalog??

Similar Messages

Maybe you are looking for