What kind of wrapper Program for Running OWB 10g Packages
Hi,
We are migrating our mapping from OWB 9.i to OWB 10.g. Earlier we were using a scheduling tool and through that we used to execute the package for the OWB Mapping from SQL Prompt with th below mentioned command at SQL PLUS.
execute &procname..main(:operating_mode,:audit_level,:max_errors,:commit_frequency,:bulk_size);
Here &procname is the name of the OWB 9.i Package.
Kindly Suggest how do we do this with an OWB 10.g Mapping.
Thanks
My new classroom is being set up and I have two computers to practice on at this moment. I did try internet sharing and it worked between the main computer and a student computer (that is the main computer was wired to the network, and the student iMac was the client), and this was without a router: the main computer had a wireless network "MacBook" and I connected to it through Airport, and I had perfect access to the internet.
I'm going to sound very naive here but if all I have are the main and three student computers, can't they all just be connected directly to the main computer without a router, like I have done as described above?
But isn't file sharing what I need not internet sharing?
Similar Messages
-
I have a back up of the folder 'iTunes Media' on a Nas (LaCie CloudBox).
I do a weekly update.
Everything is cool.
Now I would love to keep the iTunes Mediafolder on the Nas and delete the one on my internal HD.
What kind of trouble I may run into?
Where are the hidden catches?
What can go wrong, and how can i undo any mistake?
I also have an iTunes Match acccount.
Cheers
rudyHI
Read this user tip Make and keep a backup of your iTunes library, and only stream from the cloud.
Problems? No hidden catches. Whilst streaming using match, you will need a wifi connection. You main worry is that if your NAS drives fails, you need to redownload your music from match but this could take time depending on how large your collection is. Personally I keep an additional backup of all my music as a matter of course.
Jim -
What is the bdc program for vendor master?
what is the bdc program for vendor master?
Hi,
Find the code here.
And do create your text file data in the order of itab structure.
{report ZBDC_XK01
no standard page heading line-size 255.
data: bdcdata like bdcdata occurs 0 with header line.
data: begin of itab occurs 0,
lifnr like lfa1-lifnr,
bukrs like RF02K-bukrs,
ekorg like RF02K-ekorg,
ktokk like RF02K-ktokk,
anred like lfa1-anred,
name1 like lfa1-name1,
sortl like lfa1-sortl,
land1 like lfa1-land1,
spras like lfa1-spras,
waers like lfm1-waers,
end of itab.
selection-screen begin of block blk1 with frame.
parameters: p_file like rlgrap-filename OBLIGATORY.
selection-screen end of block blk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
perform f4_help_p_file.
start-of-selection.
perform get_data.
perform upload.
END-OF-SELECTION.
*& Form f4_help_p_file
text
--> p1 text
<-- p2 text
form f4_help_p_file .
data: v_file like p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = v_file.
CHECK sy-subrc EQ 0.
p_file = v_file.
endform. " f4_help_p_file
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
data: s_file type string.
s_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = s_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = 'D'
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
stop.
ENDIF.
endform. " get_data
*& Form upload
text
--> p1 text
<-- p2 text
form upload .
loop at itab.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR' itab-lifnr.
perform bdc_field using 'RF02K-BUKRS' '0001'.
perform bdc_field using 'RF02K-EKORG' '1000'.
perform bdc_field using 'RF02K-KTOKK' '0001'.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-SPRAS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-ANRED' itab-anred.
perform bdc_field using 'LFA1-NAME1' itab-name1.
perform bdc_field using 'LFA1-SORTL' itab-sortl.
perform bdc_field using 'LFA1-LAND1' itab-land1.
perform bdc_field using 'LFA1-SPRAS' itab-spras.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS' itab-waers.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
call transaction 'XK01' using bdcdata mode 'A'.
refresh bdcdata.
clear itab.
endloop.
endform. " upload
*& Form bdc_dynpro
text
-->P_0126 text
-->P_0127 text
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0316 text
-->P_0317 text
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform. " bdc_field}
Reward points if you find it helpful
Thanks,
Prasanna -
What is the best program for designing event flyers? I am looking for something basic and simple.
Poor old Photoshop® is forever being put down when it comes to layout work, but it is perfectly capable, and can output a high quality print PDF the printer will be perfectly happy with. OK you don't have the text flow between columns bells and whistles of InDesign and [spit] Publisher, but if you have a $10/month Photoshop/Lightroom subscription, instead of the $50/month full subscription, don't think you can't do a perfectly good flyer or poster.
https://helpx.adobe.com/photoshop/how-to/align-objects-guides.html -
What is the best program for playing games,dics,3d settings such as "groove setting"
what is the best program for playing games,dics,3d settings such as "groove setting"?
Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G. -
What's the best program for making a header containing rollover navigation links?
I have all CS4 programs and I'm looking to make a header that contains an interactive rollover nav bar. I want the bar to be located within the header. What is the best program for creating the header and rollover buttons. I'm aware i could manipulate the images in other programs, but placement and rollover button creation is what I'm looking for. Thanks. I'm thinking maybe flash or fireworks?
Spry can do this for you. See some samples here:
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html
Or there are commercially available menu systems from the likes of companies like Project Seven, whom I would personally recommend:
http://www.projectseven.com/ -
what's the best program for print? especially for newsletter,
flyers, and catalogs? is FH going to be deprecated? thanks,
bryan> what's the best program for print? especially for
newsletter, flyers, and catalogs? is FH going to be deprecated?
thanks, bryan
If you have used FreeHand before it is sill FreeHand of
course - as long as it works in our OS and there are no new
features you like to use.
If you have documents with a lot of text elements and
multiple pages InDesign may be the second best choice. For
typography it is the best tool available.
Illustrator is more for illustrations, although it seems that
it has good control for type it is clumsy and there are a few major
bugs that makes it unsuitable for body text.
Jukka -
What is a "Load Program" for material master?
Hi All,
What is a "Load Program" for the Material master? Is this the Mass Maintainence MM17? Can a Material be extended to all VIEWs + all Plants in one shot via MM17?
What are the steps using MM17?
Thanks in advanceYes, There is a Program to Upload Material Master Ie : RMDATIND, RMDATGEN
Using the above Program you can Upload Material Master. And You can Also use Uploading Tools like LSMW / BDC etc.
MM17 is For MAss Maintenance. Suppose If you want to Update Purchase Group / Purchase Value Key / MRP Controller / Etc... to 1000 Materials Using this MM17 you can Update in Bulk.
For Extending Views You can Use MM50 with LSMW if Material is Bulk.
Regards,
Ashok -
What's the best Mac for running Final Cut Pro X?
Title says it all. What's the best Mac for running Final Cut Pro X? I'm not looking to make a feature length hollywood film. But I'd like to be able to edit video without lag.
Yes. Begin with the fastest processor / graphics card / and as much RAM as you can afford. (As all three will become obsolete over time.)
I started from scratch. I have a 27-inch iMac with a 3.4 G Intel Core i7. (currently the fastest processor for an iMac) I also ordered the best graphics card--AMD Ratheon HD. I ordered 16G of RAM, but recently added more RAM to equal 24G. (OWC makes good after-market RAM for iMACs.)
Last, I ordered a flash drive / SATA hard drive combo. (250G on flash / ITB on SATA). The OS and all of my applications run off the flash drive. (for fast start up!)
I put all of my media and FCP projects onto the SATA hard drive.
Now, I had the option to order a 2TB SATA. But, I realized I can always buy more external storage as I edit more and more projects. ALSO! FCPX is GREAT when it comes to editing projects on external drives! I can segregate an entire project and its media files onto a removeable drive. I simply launch FCPX, plug in the drive and--poof!--I'm ready to edit. It sees the project and the media right away. When I'm done editing, I can then send this drive to another editor (also using FCPX) or attach it to my MacBook if I want to edit the same project in the field.
This has worked for me. I wish you luck. -
What's the standard program for smartform : HR_ECM_CRS
Hi Friends
what's the standard program for smartform : HR_ECM_CRS?
<REMOVED BY MODERATOR>
Regards,
Sree
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 4:14 PMhi
good
check this link, hope this would help you to solve your problem.
http://saphelpbykevin.blogspot.com/2006/09/compensation-review-statement-confusion.html
thanks
mrutyun^ -
What are the best options for running windows on a Mac Pro
what are the best options for running windows on a Mac Pro
For gaming and other CPU intensive stuff: Boot Camp – https://www.apple.com/support/bootcamp/
For the rest: any virtualization software (Parallels/Vmware Fusion/VirtualBox) -
What is the best program for panning across an illustration for an App i am working on?
What is the best program for panning across an illustration for an App i am working on?
What is the best program for panning across an illustration for an App i am working on?
-
What is the best browser to run oracle 10g forms
SALAM TO ALL MUSLIM BRITHERS
what is the best browser to run oracle 10g forms_Hello Ady,
Hey not all of us have a religionok, I extend my statement to those with a different religion, atheists, agnostics and anybody who does not beliefe in a divine being of any kind ;-)
some of us are bright enough to be atheistsThe implicit statement of this is not better than greeting only users of a certain religion.
To the OP: I respect your belief, but we had the discussion about greetings in this forum before. To most users any relation to a religion is inapropriate and considered a violation of the Terms of Use, e.g. {message:id=9677530}.
Edited by: Marwim on 16.04.2012 07:56 -
What is the best solution for running windows based programs
I have one program that I need windows for. What is the best solution for doing this without painfully slowing down my mac.
Depends on your needs.
BootCamp requires reboot and uses all physical resources of the system. Only OSX *or* Windows can run. Better for gaming or memory intensive tasks. BootCampAssistant must set up the boot sector to make it work. Also BCA required to remove it.
VM (virtual machine) like Parallels which "hosts" Windows while still running OSX. You split RAM between the two environments. VM is just another program so no special boot sector changes needed, but not good for graphics or RAM intensive programs.
Other recommended alternates to Parallels (paid) are VM Fusion (paid) and VirtualBox (free download from Oracle.com). -
What is the best practice for running a long report/query against an active database?
We are using SQL Server 2012 EE but currently do not have the option to run queries on a R/O mirror though that is my long term goal. I am concerned I may still run into the below issue in that scenario as well since the mirror would also be updating data I
am querying.
I have a view that joins across several tables from two databases and is used by an invoicing program on existing data. Three of these tables are also actively updated by ongoing transactions. Running a report that used this view did not use to be a problem
but now our database is getting larger and we have run into some timeout problems for the live transactions coming in.
First the report query was timing out so I set command timeout to 0 and reran the query which pegged all 4 CPUs 100% for 90 minutes and so I finally killed it. Strangely there were no problems with active transactions during that time so I'm wondering if the
query was really running doing anything useful or somehow spinning and waiting. I reviewed the view and found a field I was joining on that was not indexed so created an index on that field, reran the report, which then finished in three minutes and all the
CPUs were busy but not at all pegged out. Same data queried both times. I figured problem solved. Of course later, my boss ran a similar invoice report, with the same amount of data, and our live transactions started timing out 100% while his query was running.
I did not get a chance to see the CPU usage during that time.
I looked at the execution plan of the underlying view and added the suggested index but that did not help. When I run the just the view at SQL Server it does not seem to cause any problems and finished in a couple seconds. Perhaps something else going on in
the reporting tool using the view.
My main question is - Given I have to use the live and active database, what is the proper way to run a long R/O query/report so that active transactions can still continue to update
tables that I am querying? sp_who2 did show transactions being blocked so I guess a long query accessing the tables blocks live transactions accessing those same tables, but certainly I'm not the only one doing this. I
am considering adding "with (nolock)" but am hoping there is a better standard practice as that clause can return dirty data and I understand why. Thx, Dave
Thanks, Dave
DaveHello
You can change the DB isolation level to Read uncommitted
http://technet.microsoft.com/en-us/library/ms378149(v=sql.110).aspx
or use WITH (NOLOCK)
I do use NOLOCK option for the dirty reads to avoid locks on the tables
Javier Villegas |
@javier_vill | http://sql-javier-villegas.blogspot.com/
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you
Maybe you are looking for
-
Created Adobe Portfolio - now all pdf reload with open
Help! I needed to email 70 pdfs. Instead of putting them all into one large pdf, I used the 'suggestion' in the new Macintosh Acrobat Pro 9 that I use a Pdf Portfolio. ( I used three Portfolios, then emailed them using the "email this portfolio" butt
-
Microsoft forefront protection 2010 for exchange server is unable to perform the requested function
I get the following error any time I try and change any setting: Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Mi
-
Module pool to maintiane table ztavble
hi can anyone send me complete code to refer for maintaining a ztable following validation are required like 1) sortiing deletein and addition save etc all as in table maintianece i need to code by module pool becasue in table maintainece sorting cod
-
Does anyone know what's the last version of Sports...
I try to install and run ST 3.51, it was installed alright but warned me that this was not the right one for my phone or something along those lines. When trying to run from apps menu, nothing happens. So now I'm looking for an older version, the lat
-
MANIPULATING INTERNAL TABLE...
Hello, I have a internal table I_TAB[] as follows: ID--VALUE---ATTRIBUTE P1--36-- D P3--34-- Y P9--32-- J I want to do a mass change in the ID value of this internal table such that, all the IDs get changed to 'PA' as follows. I don't want to loop at