What record keeping program is comparable to macmoney?

I am using a program, macmoney 1989 survivor software ltd to do my record keeping and taxes. My computer 6115cd is outdated and so is my printer. When they crash I will need to know something better as a back up. I guess that time should be now.
Any suggestions?

I like Accountedge. They are a solid accounting software.

Similar Messages

What program is comparable to adobe flash player on my iPad?

What program is comparable to adobe flash player on my IPad?

IOS device do not support Flash
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

What does Apple have that compares to Adobe flash player ?

What does Apple have that compares to Adobe Flash Player, I keep getting Blocked plugged message and it tells me to download Adobe Flash Player and when I do nothing happens. Also when I purchased my iMac it came with Leopard osx system, last year I installed the Snow Leopard 10.6.3 system and since then cannot read CD's or DVD's from PC or my husbands new iMac with Mountain Lion system.

There is no equivalent to Adobe's Flash Player. You either have it installed or not. For the reasons outlined below, Apple no longer sell Macs with Flash Player pre-installed, you have to obtain it from Adobe.
Flash - Apple's official position:
http://www.apple.com/hotnews/thoughts-on-flash/
Flash v. HTML5
http://www.streaminglearningcenter.com/articles/flash-player-cpu-hog-or-hot-tama le-it-depends-.html
Apple may have more reasons behind not installing Flash by default other than the stated reason of ensuring that users always have the most up-to-date version. Having Flash installed can cut battery runtime considerably—as much as 33 percent in our testing. With a handful of websites loaded in Safari, Flash-based ads kept the CPU running far more than seemed necessary, and the best time I recorded with Flash installed was just 4 hours. After deleting Flash, however, the MacBook Air ran for 6:02—with the exact same set of websites reloaded in Safari, and with static ads replacing the CPU-sucking Flash versions.
http://arstechnica.com/apple/reviews/2010/11/the-future-of-notebooks-ars-reviews -the-11-macbook-air.ars/3
And this:
http://www.usatoday.com/tech/columnist/kimkomando/2011-02-18-changes-web_N.htm
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Recording two programs whilst watching a previousl...

Until a few weeks ago I have been able to record two programs AND watch a previous recording without difficultly. Now, for example, if I have set up two recordings to start at 9pm and before that time I start to watch a recording come 9pm the recording I am watching stops and I get the black screen with the blue 'continue' box. I press continue and it just keeps popping up. (This would have happened previously but as soon as I pressed 'continue' the recording would indeed continue). Now if I want to continue watching the recording I have to go in and delete one of the recordings that has just started. I hope that all makes sense! It is really annoying and I don't understand what has changed to make this happen? anyone got any ideas?

How annoying is that. I haven't cone across this myself has anyone else?
I hope it is not another "feature"
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

What word processing program should I purchase for iMac

What word processing program should I purchase for iMac

Hi
Pages is very good as a Word Processor but it lacks the ability to do Macros if you continually do a repeat operation. For me I cut and paste text from another source and it needs reformatting Font; bold, size, colour every time I do it. It is a real pest.
Many years ago Word Perfect Mac could do this [still the best wordprocessor interface] also [from memory] Apple Works had the ability to record macros.
A current MAC wordprocessor to look at which will do pretty much everything INCLUDING MACROS is Nisus Writer. Express version is $49, Pro version $79 and it has a free 15 day demo.
Cheers

Capture recorded tv programs on my sky+ with imovie

Hi
I have a sky+ (pvr) box which has a function to allow a dvd recorder to record programs on it's hard drive. From what I can see the box simply plays them for the dvd recorder to record.
My question is this - is it possible to wire a sky+ box to my mac to record the program to my hard drive to the import into imovie?
I would have to use an RF cable so any advice on necessary hardware would good too.
Hope you can help!
Mark

I believe iMovie only supports direct importing of video via Firewire from a camera capable of machine control from that output. I think you would have to capture the video from your sky thing, with something like Snapz Pro, then convert it to a compatible format for iMovie, but by that time, you may not need to import it into iMovie if your intention is to simply capture the video for viewing on your Mac.

NiScope EX Multi Record vi program

Hi,
I have a question in niScope EX Multi Record.vi program. I was not explaining it well in my previous mail. That is why people can not answer my question. This time, I will explain clear.
Attached "abc" is my prgram with niScope EX Multi Record.vi prgram. This is my question. How come I can not get the waveform when I do the same action in the seond time? Here is how my prgram work. First, I press "reset" push button, the light will go off and press it again the light turn off. The prgram do nothing, just reset the value of the voltmeter and current meter. Second, I press the "enable" button, the voltmeter and current meter get reading since I have a subprgram under timeout in the event structure. Then, I press the "enable button" again to turn on the light. Third, I press the "bark button", my hardware will be shocked and output waveform, since I have a subprogram, niScope EX Multi Record.vi, I set the right parameter, I will get the "shock pulse waveform".
Everything looks good and working. Then I press the "bark" push button again to turn the light off. I want to do the same action the second time to see if the waveform of niScope EX Multi Record will generate again because normally I tried the same action the second time. the waveform will generate again. Here I am talking about I use the niScope EX Multi Record.vi prgram without anything and event structure and I did the same action as what I said in the above procedure. But, I did the same action in the second time in this "abc" vi program with niScope EX Multi Record. vi prgram, I could not get a new waveform, I don't understand why? could you please tell me what I did wrong? my niscope EX Multi Record.vi prgram is out of the event structure, what I see is like this prgram is alone just like the one I tried without event structure before. I am not sure if this single prgram mixed with event structure, it will be what? will it be different like I put two subprgrams in one block diagram even though I tried two subprgram put it together and it will work what it suppose to do. I am not very sure if ni scope EX Multi Record.vi prgram mixed with other prgrams with event struturem, what will happen? Will it be the same like two subprgram put it together? Could you please tell me exactly what if I put niScope EX multi record.vi with event structure including another program, what will happen? I would like to understand.
Attachments:
abc.vi ‏227 KB

Hi Nyborn,
The changes of the graph color are controlled by the Waveform Graph property node on your block diagram. In the niScope EX Multi Record.vi example the Plot.Fill/PtColor value of the waveform graph property node is connected to a random generating number which changes the color on every execution. If you want to assign just one color, remove the random number vi and just wire a acii constant for the color you'd like. You can find listing of all acii color codes here.
I hope this helps.
Regards,
Natasa

Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

Hi All,
I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
Thank you!
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Hi Andreas,
Thanks for the reply.
The link you put up, takes me to the page, but
"The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
That was WaterFox.
The webpage cannot be found
This in Internet Explorer 11.0
The Files in question were Recorded by Beyond TV to my Local Hard Drive.
When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
When I use Windows Media Player, nothing can be heard from the Rear Speakers.
Speakers and Hardware are working fine.
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

What iOS Developer Program license should be used?

What iOS Developer Program license should be used for the following scenario: our company wants to develop an app to be distributed among employees, our subsidiaries, our service/sales partners (distributors of our products) and finally end-users. The app is primarily aimed at end-user of our product. We don't want to provide that app via the iTunes App store to general public , but rather only to users, that are well-known to our company or to our sales/service partners. These users already have one of our products.
Is such a scenario feasible at all? Comparing iOS Developer and iOS Developer Enterprise it looks like applications can be distributed either through the App Store or through enterprise deployment limited to a company's employees only. Please advise. Thanks!

If you can reach these forums here, you can reach those links.
Apps for employees...Enterprise Program.
Everything else....Individual Program. See the App Store Review Guidelines for iOS Apps for restrictions and cases where apps may be rejected, otherwise.

Hi guru's what is outbound program to run in idocs

hi guru's what is outbound program to run in idocs , plz help me

Hi Sri,
If u want to run outbound program for 'Z' segment and Idoc type use this type of program
DATA: Begin of imara occurs 0,
matnr like mara-matnr,
mtart like mara-mtart,
mbrsh like mara-mbrsh,
meins(3) type c,
end of imara.
data: begin of imakt occurs 0,
maktx like makt-maktx,
end of imakt.
DATA: wamas_con LIKE edidc,
imas_data LIKE edidd OCCURS 0 WITH HEADER LINE,
icom_con LIKE edidc OCCURS 0 WITH HEADER LINE.
PARAMETERS: e_matnr LIKE mara-matnr,
e_msgtyp LIKE edidc-mestyp,
e_rcvprn LIKE edidc-rcvprn.
retrive app. data from DB
SELECT matnr mtart mbrsh meins FROM mara INTO TABLE imara WHERE
matnr = e_matnr.
SELECT maktx FROM makt INTO TABLE imakt WHERE
matnr = e_matnr and SPRAS = 'E'.
*Master idoc control record
wamas_con-rcvprt = 'LS'.
wamas_con-rcvprn = e_rcvprn.
wamas_con-idoctp = 'YMATMAS1'.
wamas_con-mestyp = e_msgtyp.
master idoc data records
LOOP AT imakt.
imas_data-segnam = 'YMAKT1'.
move imakt to imas_data-sdata .
APPEND imas_data.
ENDLOOP.
LOOP AT imara.
imas_data-segnam = 'YMARA1'.
move imara to imas_data-sdata .
APPEND imas_data.
ENDLOOP.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = wamas_con
OBJ_TYPE = ''
CHNUM = ''
TABLES
communication_idoc_control = icom_con
master_idoc_data = imas_data
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
otherwise <b>material master transfer using BD10
customer master using BD12
vendor master using BD14</b>
Regards,
Vijay

What Screen capture programs work well for streaming?

i have tried a recommended program called ManyCam and it works.. i can stream and in HD. my issues are with the lack of audio options with this program.
For example. i want to be able to have a game running.. music through WMP and have mic available on a PTT.
With Many cam it seems like this software wasnt set up with streaming in mind as its only audio functions supported are for mic inputs and it will
NOT register music playing through the speakers.
unlike AFMLE open brodcaster has the option to select a mic and play audio to the stream that is playing through my default audio device. which is awesome except its lacking in other features. and it is still using manycam.
So... how can i get AFLME to register my default audio device through manycam..
or... what other capture programs are supported by AFMLE (ive tried searching but i keep getting webcam results and posts on how to capture other peoples streaming content.. lol.. frustrating

Hi, I am new to flash media encoder. I have ManyCam on my mac, however, when I downloaded flash media encoder 3.2 I could not get it to recognize my manycam. Can you tell me what to do?

Can't Record Specific Programs/Channel

I've had FIOS TV for less than 2 weeks. I try to record some programs on WUSA 9 (CBS, in DC) and get a message "DVR Alert - This program can't be recorded.) Is CBS blocking this capability? Is this a by product of the Dish hopper issue? or do I have a unique problem. Haven't been able to find any reference to this issue on the internet.
Thanks,
JG

Hubrisnxs wrote:
what model set top box do you have. This sounds real wierd.
Maybe try a DVR auto correct.
Click dvr and there should a fix dvr functionality feature.
MENU > CUSTOMER SUPPORT> In-Home Agent.
A few options that might help..
-Set-Top Box Auto Correction
-Auto-Fix MRDVRY issues
-Reboot STB

Record tv programs

What can i buy at Best Buy if I would like to record tv programs without a subscription?
I have a PC laptop and a verizon set-top box . I would need either a tuner usb card or dvr.
The
Hauppauge - PCTV HD Stick USB 2.0 TV Tuner with PVRsold at best buy- i was told by the manufacturer Hauppauge
does not change channels.

dustinjohnson wrote:
Did you ever get an answer to your question? It sounds like we are in the same situation. We currently have satellite service, but don't want to pay for the dvr equipment and service. We are hoping to find some way to use a pc with a hauppauge card to solve the problem, but are having trouble finding anyone that knows enough to answer our questions and explain things to us. Thanks!
Welcome to the forum, dustin.
It may be possible with an analog connection from the Direct TV box to a capture card. Quality will be moderate to poor. Digital copies are not possible for reasons that should be obvious. The Hauppauge unit you speak of will not help you.
Disclosure: Former BBY employee.

What is the programming (ABAP) difference between Unicode and non Unicode?

What is the programming(ABAP) difference between Unicode and non Unicode?
Edited by: NIV on Apr 12, 2010 1:29 PM

Hi
The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
The main decisions to adjust / replace are (examples):
ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
H-SY-INDEX TEXT (*) TO <F1>.
DATA INIT (50) VALUE '/'. by
DATA INIT (1) VALUE '/'.
DESCRIBE FIELD text LENGTH lengh2 by
DESCRIBE FIELD text LENGTH lengh2 in character mode.
T_ZSMY_DEMREG_V1 = record_tab by
record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
escape_trick = hot3. by
escape_trick-x1 = hot3.
itab_txt TYPE wt by
ITAB_TXT TYPE TABLE OF TEXTPOOL
DATA: string3 (3) TYPE X VALUE B2023 '3 'by
DATA: string3 (6) B2023 TYPE c VALUE '3 '.
OPEN DATASET file_name IN TEXT MODE by
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
or
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CODE FROM PAGE TRANSLATE a_codepage record by
record TRANSLATE USING a_codepage.
CALL FUNCTION 'DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'WS_DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
CALL FUNCTION 'WS_UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
PERFORM USING HEAD APPEND_XFEBRE +2. by
PERFORM USING HEAD APPEND_XFEBRE +2 (98).
Best Regars
Fabio Rodriguez

LSMW Recording source program editing

Hi All,
Can we edit LSMW recording source program so that i can implement program logic? if so how can we do that.
Thanx,
GUNA

Hi Guna,
U can edit source program (but remember whenever u r executing the program its get changed), so my sincere request is dont go for that.
and if u want to write any logic best method is go for Mapping step(5th step)
in that there is Display variant icon , press that
u find pop-up screen in that check bottom three boxes and enter,
afterwards u find functions where u can write logic there what ever u want as per the requirement.
Reward for useful answers.
Thanks
Naveen khan

What record keeping program is comparable to macmoney?

Similar Messages

Maybe you are looking for