What rule can be used to create a namesapce

Hi all:
     I want to create a namespace in IR for ECC, but don't know what value should and could be used for the namespace. is there any rule for the naming of a namespace?
     Thank you very much!

Hi,
You can follow some standards as said
For Namespace it is as below
http://<short Scenario Detail> : <Company Name> . com
an example would be
http://SalesOrderCancel:abc.com
for some specific cases where your description is same and you want to be specific about the direction too you can specify like
http://SalesOrderCancel:sap_to_bi:abc.com
Thanks!

Similar Messages

  • What tool can i use to create an animation for iPad

    What tool can i use to create an animation the will run in I.E., Firefox and iPad. I want to have a series of large buttons that i can scroll using arrows on the left and right side of the large buttons, with each button  being a hot spot. I can't use Flash because it is not supported on the iPad.
    Thanks,
    Steve

    I've been playing with both Edge and Hype, and I found that stuff I create in Hype actually works in IE 8, but stuff I create in Edge does not. I'm not sure what the difference is, other than perhaps Hype automatically writes some legacy scripts so that things will work in IE. Hype's not perfect, but it's doing the job for what I needed it to do, where Edge was no help at all (working in IE I mean).
    I think Edge is a much better tool - more robust, greater feature set, but Hype seems a bit more forgiving and seems to play nicer with crappy browsers like IE.

  • I use pages. What programmes can you use to create bibliographies? Is there anything like endnote available?

    Is there anything I've endnote for pages?

    Hi Ma,
    The problem I have with the endnote built in to pages is that I cannot cut and paste citations into it
    I read this on Page 56 of the Pages'09 User Guide, and tried it. I could paste into the endnote. What is it that you can't do?
    Adding an Endnote at the End of a Document
    In a word processing document, you can add special marks in a document that link to notes at the end of the document. These notes are called document endnotes.
    To add a document endnote: 
    Click Inspector in the toolbar, click the Document button, and then click Document.
    Choose Use Document Endnotes from the Footnotes & Endnotes pop-up menu.
    Choose a numbering format from the Format pop-up menu.
    Choose whether endnotes are continuous or restart on each page or section from the Numbering pop-up menu.
    Place the insertion point in the main text flow (not in a text box, table, or other object) where you want the endnote mark to appear.
    Choose Insert > Endnote.
    An endnote mark appears, and the insertion point moves to the corresponding endnote field at the end of the document following a section break. If you don’t want the endnotes on a new page, delete the section break.
    Type the endnote information.
    My example:
    I was able to type or paste the endnote information. Please reply and say what is not working for you.
    You can download the User Guide from the Help Menu in Pages.
    Regards,
    Ian.

  • What Function Module can be used to create vendor master data in SAP R/3?

    Hello -
    I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliver a standard BAPI that can be used to create vendor master records in the ERP/R3 environment (similar to the BAPI_MATERIAL_SAVEREPLICA for creating material master data records).
    I have been able to find BAPI_VENDOR_CREATE but this only calls the online transaction and does not offer much additional functionality beyond what transaction code XK02 already offers.
    The next best alternative appears to be IDOC_INPUT_CREDITOR but our preference would be to not use IDOCs for the project we are working on.
    Can anyone offer any insight or personal experience on how vendor master records have been successfully interfaced with SAP R/3? Did you have to use IDOCs or create a custom RFC call? Thanks for the help!
    Rich Wortmann
    << Personal information removed >>
    Edited by: Rob Burbank on May 14, 2009 10:43 AM

    Quite a gap in the BAPI arsenal. I think the options are IDoc, which you don't want, good old program RFBIKR00 (requires flat file for input, can be used via LSMW) or DIY (very complex).
    Thomas

  • What is maximum number of tables that can be used to create HTMLDB app?

    What is the maximum number of tables that can be used to create an HTMLDB app? There seems to be a 10-table limit?
    Thanks.
    Dianna Gibbs

    I have over 200 photos in my book and it was accepted. There is a limit on each widget though. The interactive widget seems to have a limit of around 30 or 40.

  • What can I use to create a photo banner/collage that is free formed. I'll need background colors and ability to place 5 or more pics in a horizontal row? Does adobe have a product i can use to create this?

    what can I use to create a photo banner/collage that is free formed. I'll need background colors and ability to place 5 or more pics in a horizontal row? Does adobe have a product i can use to create this? I'm not looking for templates when creating.
    thanks
    tracy

    You can select 5 (or more images) and place them by dragging in Adobe InDesign. After creating document go to File > Place, navigate to images and select them. In InDesign start dragging and press right arrow key couple of times then release mouse button. You can export file as PDF, JPG, PNG image from File > Export.

  • What tags can be used with Notes?

    I have been searching all over to figure out what typs of tags can be used when creating Notes for the iPod. I keep comming back to this document http://developer.apple.com/hardwaredrivers/ipod/iPodNoteReaderGuide.pdf. It is supposed to show available tags. At least that's what all the referring sites say to refer to for available tags. It seems to be a basic tutorial with not much going on. I want a broader reference so I can format my notes. Supposedly the tags are based on a subset of HTML. Well then what are these tags? Has Apple taken the original document down? ***?
    Shuttle XPC ST20G5   Windows XP  

    That's just it, if you read further down it says "You can get the full list of tags for iPod notes over on Apple’s developer connection" and it is linked back to http://developer.apple.com/hardware/ipod/. However, there is no full list of tags on their site anywhere. In the meantime I emailed the ADC to see if they know what happened to the original document. There's got to be more tags than just those on MAKE.

  • What program should I use to create an ipad app to collect email addreses?

    What programs should I use to create an ipad app to collect email adresses in my store?

    For building an iPad app, you can take a look at Adobe Digital Publishing Suite or Adobe Phonegap. Can you describe how would you want to collect email ids and who's emailid's would you want to collect?

  • What function can be used to give a "count of occurrences of values" ?

    I would be very appreciative if someone in the user community could save me a few months of work....I've already been neck deep in my old statistics and calculus manuals. What function can be used to get the count of occurrences of the value of an item. Ex: Item is Status and possible values are "Published", "In Production", "Construction". In one report, I want to report all records of a table and list the Status (among other items) but at the total, I would like to see a count of each value for the item Status....something like Sum(Count(Status = "Published")) Sum(Count(Status = "In Production")) Sum(Count(Status = "Construction")). I know I could run the report 3 times counting a unique value, but I'm trying to be more efficient in my reporting. Thanks all for any help given.

    Hi
    In addition to John's answer, inside Discoverer you can do this:
    Let's assume you have a Status item and it has the values you mention. If you create the following new calculation SUM(ROWNUM) and name it Status Count you only need to include the Status and the Status Count in the worksheet. You will now see a count for each status.
    Best wishes
    Michael

  • What software usual is used to create installation package for client appli

    What software usual is used to create installation package for client application?

    >
    I mean the software that installed my application on client's machine. E.g. by click button Next, Next ...>Try clicking some of the 'buttons'(1) on the [webstart API examples|http://pscode.org/jws/api.html] page.
    (1) They are not HTML buttons, but links stylde to look vaguely like buttons. HTML buttons can be used just as easily, see [Launch JNLP App - launch style|http://pscode.org/jws/launch.html] for an overview of different launch styles.

  • I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

    I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

    A calendar is not difficult nor does it take long once you know where the dates fall.
    Start with a basic month template table.
    1. Click on the table icon on the Toolbar to create a basic table for one month
    2. Click on the resultant table > Inspector > Table > Headers & Footers > 2nd button > 1
    3. Inspector > Table > Body Rows: 6 > Body Columns: 7
    4. Inspector > Metrics > Size > Width: 7 cm/in > Height: 7 cm/in
    You can drag resize the whole month to your liking afterwards
    5. Select the entire header row > Inspector > Table > Edit Rows & Columns > Merge Cells > Type in a month
    6. Type Mon in first cell & Tue in 2nd cell of of 2nd row > Select both cells and drag the white dot in the bottom right corner sideways to fill the cells with the days
    7. Do the same with the dates in the cells below
    8. You can fill the spare dates at the beginning and end of the month if you like and maybe change them to a paler grey.
    9. Style and position the text as you like it.
    10. If you don't want to see the grid or want different strokes, colors etc:
    Inspector > Table > Cell Borders/Cell Backgrounds etc
    When you have the first month looking the way you want, option drag out copies sideways to make the rest of the months.
    Peter

  • Encoded my surround files in compressor and now need to author to DVD. What software can I use?

    I've created my AC3 file from my 6 surround audio files along with my video in compressor. What software can I use to author my surround video to DVD? I have FCPX but I don't have DVDSP or toast. Any suggestions?

    Although I don't use it, I'm pretty sure Toast will treat the file properly. (But I would go on the Roxio forums to check.)
    If confirmed, that would probably be your lowest cost solution.
    Otherwise, if you know someone who has either Final Cut Studio or Adobe Production Suite you could use DVD Studio Pro or Encore.
    Good Luck.
    Russ

  • HT3224 What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

    What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Dead Hard Drive - What replacement can I use for iBook G4?

    I have a
    Machine Model: iBook G4
    CPU Type: PowerPC G4 (3.3)
    Number Of CPUs: 1
    CPU Speed: 933 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 384 MB (Upgraded to 1Gig)
    Bus Speed: 133 MHz
    Mac OSX 10.3.9.
    The hard drive died. What type and manufacrure do I need. Is it a Serial, ATA or IDE? What sizes can I use 40G, 60G, 80G, or 100G?
    Thanks for your help.

    but if your ibook was made before 2003 the limit for hard drives is 128GB any mac made before 2003 has this limit.
    heres a take aprt manual
    http://www.sterpin.net/uk/ddibookg4uk.htm

  • I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program  can I used  to transfer one hard-drive  to another  hard- drive  on this mac pc.

    I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
    ,what program  can I used  to transfer one hard-drive  data to another  hard- drive  on this mac pc.

    The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
    (66989)

Maybe you are looking for