What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

Dear All,
Revision: 11.5.10.2
We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
Thanks,
Helen

Hi Helen-Oracle
As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
Thanks
Mirza Tanzeel

Similar Messages

My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed. What do I do

My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?

http://support.apple.com/kb/HT1212

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

After upgrading Lightroom on a mac. Deleting the older version along with old catalogs and files?

Can I delete the older version along with old catalogs and files? and what is the best way to go about this? Thankyou : )

manually uninstall then, Manually uninstall Lightroom

If the bill-to and ship-to are the same

Hi everybody,
Can somebody please help me with this? If I have both the bill-to and ship-to party as the same, how can I get that information as two different addresses etc in Sales. I am looking at the KNA1 table and I know I can use partner functions for this but I cannot figure out how to use them to get the information in one report as bill-to and ship-to if the information is the same.
PLease somebody help.
Thanks.

IF it would help here is the code:
DATA: l_kunnr LIKE vbpa-kunnr.
SELECT kna1kunnr kna1name1 kna1stras kna1ort01 kna1regio kna1pstlz
kna1brsch kna1erdat kna1ktokd kna1bran1 kna1~telf1
                 kna1telfx knvpparvw knvp~vkorg
                 knvp~vtweg
                 knvp~spart INTO
                 CORRESPONDING FIELDS OF TABLE
                 typ_tab FROM KNA1 JOIN knvp on
                 kna1~kunnr =
                 knvpkunnr where knvpparvw = 'Z3'.
LOOP at typ_tab.
WRITE: / typ_tab.
     WRITE:/ typ_tab-kunnr,typ_tab-name1,typ_tab-stras,   typ_tab-ort01,
             typ_tab-regio, typ_tab-pstlz,'USA',
             typ_tab-brsch, typ_tab-erdat, typ_tab-bran1, typ_tab-telf1,
             typ_tab-telfx, typ_tab-parvw, typ_tab-vkorg,
             typ_tab-vtweg, typ_tab-spart.
     SELECT kunnr INTO l_kunnr FROM VBPA
     WHERE kunnr EQ
     typ_tab-kunnr and parvw EQ 'RE'.
     ENDSELECT.
WRITE: / l_kunnr.
     SELECT name1 stras ort01 regio pstlz INTO TABLE   typ_kna1 FROM
     kna1 where kna1~kunnr = l_kunnr.
     LOOP AT typ_kna1.
         WRITE:/ typ_kna1-name1,typ_kna1-stras,typ_kna1- ort01,
                typ_kna1-regio,typ_kna1-pstlz.
         WRITE:/.
    ENDLOOP.
ENDLOOP.
Thanks & regards,
AM

Is there a way to have the Reply To field appear on the Addresses page along with To., CC, and Bcc?

Using Mail with Mavericks, is there a way to have the Reply To field appear on the Addresses page along with the To, CC and BCC fields?

Click the little popup menu button next to from and select it:

How can I print the Album name along with the Contact Sheet created from the photos it contains?

I have my photos organized into albums. I would like to print a contact sheet for each album, but would like it to include the album name. This seems like a very basic part of organizing, but it's not overly apparent how to do it. I would also like to resize the caption font on the contact sheet, too. Any suggestions?

Thanks for your replies.
When you say "book creation," are you referring to the Photo Book option? Unless I can create a custom template, that seems somewhat limiting, as there are only a few templates to select from.
I'm trying to come up with a method to manage headshots of staff, the printout of which would be distributed to hotel and security personnel while our group travels (the included Photo Book templates are not appropriate for a straight-up, columnar layout like this requires). My thought was to keep each department's headshots in its respective Album, which could then be quickly printed and distributed. Staff for each department rotates in and out on a regular basis, and the Elements Organizer seemed like a good way to quickly add, caption and place into each Album the appropriate pictures. Contact Sheet printing seemed to be a quick way to accomplish this, but I was hoping to get the Album name (i.e. department name) at the top of the printout.
I printed the contact sheet to a PDF (I have Acrobat Pro XI), then inserted it into a Word doc, as you suggested. While it does allow for headers, etc. it does add a couple of additional steps to the process, but more importantly, I'm finding that the image captions in the PDF are blurred, and not crisp enough to read easily (it may be better if I had font control in the PE Contact Sheet).
So maybe I need more of a desktop publishing app (more than I was wanting to spend), but the Organizer gives me a good process for quickly managing my photos.
Any other suggestions or comments would be greatly appreciated.

HT1551 Atv3 doesnt want to finish installing update although ive tried several times, now the remote wont work with it either and when I press the remote the light on the box flashes several times, I unplugged everything but nothing works and I cant reset

my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

I'm on iTunes 11.0.0.63 for Windows. iTunes used to display the total number of songs in my library, along with total playtime and memory footprint, at the bottom of the window. How can I make it display this information like it used to?

Hello! Thanks in advance for reading my question.
so, I updated iTunes to 11.0.0.63 on Windows, and the new layout looks nice, but iTunes no longer gives my total song count, memory footprint, and total play-time at the bottom of the window, the way it used to. I just want to know how to get that info back. Thanks so much!

Ctrl / or View > Show Status Bar should do it.
Weirdly having turned mine on the menu is not there to hide it again and the shortcut doesn't work.
tt2

My developer id on Xcode says the password is rejected, but I can long on to the apple development site with same password and it is okay. This started after downloading Xcode 5.0.2 any ideas?

On xcode preferences the account is being rejected due to password wrong but the password works on the developer site. I am using xcode 5.0.2 and an iphone 4s. Prior to this i was using an older xcode and an iphone 3gs. I entered the password again but it fails. i deleted all xcode off my machine, downloaded a new verison from the app store, but problem persists. Any ideas? thanks in advance for your help. regards

did you ever figure this out? Im having the same problem... only thing I can think of is - that I am admin on the account.. .so maybe Apple thinks admins don't ever need to use Xcode? haha

What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

Custom text component with different start and end points for each line

I'm trying to create a custom component extending textArea in which each individual line in the textArea would have different start and end points. For example, the start/end points for line 1 might be 20 pixels in the front and 35 pixels at the end but start/end points for line 2 might be 25 pixels in front and 20 pixels at the end, etc. These boundary values would be passed in. The width of the entire textArea component would be a fixed size. The result would be something like this:
Jack and Jill
ran up the hill
to fetch a pail of water
depending on the boundary values of each individual line of course. The custom component would take a string and render it in the text component with the appropriate individual line start and end points. I'm trying to do this by adding the text component to the display with the passed in string and then adding in spaces in the beginning of each line and adding a "/n" at the end of the line wherever appropriate based on the start and end values for that line.
Just wondering if I'm on the right track and if anyone has any advice on this.

> Applying the marker places the same icon on all lines of the graph and I need a different one for each
What do you have selected when you assign the marker? It
shouldn't apply to all the markers on the whole graph unless you have all the existing markers selected when you apply the new one.
Assigning marker designs is exactly analogous to assigning bar graph designs.
If you have a single marker selected when you assign the new design, it will apply to only that graph data point.
If you use the group select tool (or option-click with the direct select tool) to reclick on an already-selected marker until all the markers for the same line are selected, and then assign a design, the new design will apply only to the selected line. (You can extend the graph by adding more rows, and the new data points will inherit the marker for the line they are on.)
The thread linked to below demonstrates in more detail how the marker designs are scaled:
http://www.adobeforums.com/cgi-bin/webx/.3bc10970/0

How can I change the customer name in the invoice

Hi mate,
I bought a macbook air for working. It is awesome.
Unfortunately, the customer name in the invoice is my name and should be the name of the company I am working for. Or I cant claim the expense from our cruel accountant.
Is it possible to amend the customer name? If yes, how?
Thanks

damien_gong wrote:
Thanks, .
You're Welcome.
damien_gong wrote:
I will drop in their store tonight
Good Luck

How do I change the first name associated with a developer account?

How do I change the name on my developer account. I now have my discussion ID tied in with developer account, and I would like to change the name associated with my developer account. There is a field to change my first name on the discussion board, but there seems to be no option to change the first or last name associated with a developer account.

I ran into the same problem and was glad to find this post.
I started to register as a iOS developer but my daughters name shows up in the personal info field and can not be changed. When I go to the "manage my ID" page it has my name and the correct info. How do I fix this for my Developer ID registration?
I just sent an email to the link Dave supplied and am waiting for a response.

How to display the Customer Name in the Sales invoice form

Hi All!
May I know the table from which I select the customer name for a certain customer number?
Thanks in advance!

Hi,
Kna1 is the customer master table there you can find the name1 filed
Thanks,
NN.

What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

Similar Messages

Maybe you are looking for