What's the authorization to run function CSAP_MAT_BOM_OPEN

let's say, i wrote a report to change the structure of a BOM, using function CSAP_MAT_BOM_OPEN to open the bom, followed by function CSAP_BOM_ITEM_MAINTAIN and CSAP_MAT_BOM_CLOSE to change the bom and close the bom.
well, I could use this report while other could not.
When I used others sap account to run function CSAP_MAT_BOM_OPEN in SE37, I was warned I didn't have the authorization to run this function.
so i want to know the authorization to use this function.
best regards.
Jim

Hi,
The std. authorization objects for BOM will be checked (C_STUE_BER, C_STUE_WRK etc).
Regards,
Vivek

Similar Messages

What are the input parameters for Function Module

Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.

Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan.

What is the difference between partner function and partner type

Hi Gurus,
What is the difference between partner function and partner type?
Thanks,
Paul

Hi John,
The partner types allow us to distinguish between different business partners such as customer, vendor, employee etc and the partner functions represent the functionality or role each partner plays within the business transaction.
For example under the partner type Customer, you will find - Sold to party, Ship to party, Bill to party, Payer.
The business partners that exist in the market place are represented with a partner type in the R/3 system. Examples of business partners are customer, vendor, employee and contact person.
The following partner types are defined in the partner processing for the sales & distribution module
a.     AP contact person (06)
b.     KU customer (07)
c.     LI vendor (08)
d.     PE employee/personnel (09)
Assigning the partner functions in the SAP system determines the functions of particular partner in the sales process. One partner may take on several functions also.
REWARD POINTS IF HELPFUL
Regards
Sai

What is ESOA? What is the Scope/Role for Functional Consultants in eSOA.

Hi Experts,
1)     Does eSOA is a tool, application or module?
2)     What is the relation between eSOA and ECC6.0?
3)     What is the Scope/Role for Functional Consultants in eSOA?
4)     What I have to learn in eSOA?
5)     How it is useful for Functional Consultant?
6)     How it is useful for Customers?
7)     How much time it will take to learn eSOA?
8)     Where can get the Material?
9)     What all technologies I have to learn before I learn to eSOA?
I am working as a SAP HR Consultant. If I want to learn eSOA what are the pre-requisites.
I donu2019t know anything eSOA.
Please give me the answers.
Regards,
Ram

Hi Ram,
See the answers below
> 1)     Does eSOA is a tool, application or module?
ESOA is not any tool,application or module. Its a methodology/Architecture
> 2)     What is the relation between eSOA and ECC6.0?
ECC 6.0 provides some Enterprises Services through enhancement packages.
> 3)     What is the Scope/Role for Functional Consultants in eSOA?
FUnctional consultant should know which ENterprise Serrvices are available and which should be developed to carry out a business process.
> 4)     What I have to learn in eSOA?
.         Being a technical guy, there are things to be learnt like ESR, implementing designed serivces through ABAP or Java and consuming it. But being a functional guy, only awareness of what enterprise services are available and what they do and their input/output params and how they can fit into a business process is sufficient.
> 5)     How it is useful for Functional Consultant?
see above
> 6)     How it is useful for Customers?
Customers can move towards Service Oriented Architecture, get flexibility in changing a business process easily, maintaince cost is less
> 7)     How much time it will take to learn eSOA?
depends on your skills
> 8)     Where can get the Material?
lot of material in SDN
> 9)     What all technologies I have to learn before I learn to eSOA?
ABAP or JAVA,ESR ( being a technical consultant) , Web Services
> I am working as a SAP HR Consultant. If I want to learn eSOA what are the pre-requisites.
you should aware of basics of service oriented architecture
If you further want to clear doubts, do write up.
Regards,
Piyush

What is the Authorization group in Cash Journal View Maintenance (FBCJC0)

Question 1: In Cash Journal View Maintenance (Tcode: FBCJC0), what is the Authorization group?
Question 2: How / Where can I define this Authorization group?
As per the F1 Help document in SAP :
The authorization group enables you protect access to certain objects.
In order to carry out a specific activity, the user must have authorization for the combination of the activity and the authorization group.

Hi,
Authorisation in Cash journal is meant for controlling of FBCJ transaction with an user ID.
For example, if you have a multiple cash book (Cash journal) or you are maintaining a cash book according to Business Area wise, Plant wise, etc.,
In this case, you don't want to allow the other people to view / transact your cash book, then you can assign some unique identification in the authorisation group column against the each of your cash journal.
These unique identification can be of any thing eg. 1001, 1002, 1ABC, ABC, etc., After this, the indentification has to be assigned in the respective user profiles in the below mentiond objects,
F_BKPF_BED
F_BKPF_BEK
F_BKPF_BES
F_BKPF_BLA
F_FBCJ
Hope it helps
Saravanan.A

What is the program can run this flash

hi all, I download some flash from this funny site
http://www.funny-pictures.com/
but i can't run it in my computer , means my computer not my
browser , i run it only into flash programs as flash editor or
macromedia flash 6 (open it and click file menu and choce open and
search it), I want to open it directly , just click it to open
without any program

If you know the job name, than you can find out the associated program name.
Go to SM37.
Select your job from the list
Select "Step" ... here it will show you the program name
Put cursor on the program name and Go to > Variant to know what was the input to run this job.
Regards,
Naimesh Patel

What is the Diff bet partner functions and business partner?

Hi friends
what is the Diff bet partner functions and business partner
Regards
Abirath

Hi,
In SRM there are different Partner functions like REQUESTER, GOODS RECIPIENT, VENDOR ,LOCATION.
All the org units or users in SRM will have a unique identification number called Business Partner Number maintained in table BUT000.
The users can have differnt partner functions in differnt documents and accordingly mainatained in table CRMD_PARTNER.
Hope this will give you some infomation.
Regards,
Sheetal.

What is the purpose of queue functions?

well what is the relation of queue functions of Labview
and queuing theory, like MM1 system MD1 system etc.
thanks

Others may have a better explanation and example, but I have found that queues in LabView are very useful when you need to transfer a lot of information quickly and want to make sure you don't overflow or drop elements. They are better at this than using variables because the writer can keep writing whether or not the reader has read the last element.
For instance, recently we were trying to record data on a cRIO device and get the fastest rates possible. We were recieving data from the FPGA FIFO and writing directly to file. When you try to record 32 channels of 32 bits/element at 1 kHz you begin to test the limits of your write to file function. Queues worked better than variables for this because every so many cycles the write function would sort of hiccup and pause, causing the elements in the queue to increase (backup). If we were using regular variables we would have had to wait for the recording to catch up before we could continue reading data. This would mean we would be overflowing the FIFO or missing data points. However, with a queue, elements could back up a little and then the record function would catch up. (As a side note, write to binary file worked faster than TDMS in these benchmark experiments.)
Can anyone explain it better?
[will work for kudos]

What are the authorization need to be given for a Key Users in BW?

Can you help me out for this question please.
Thank in advance.
Kay
What are the authorization need to be given for a Key Users in BW?

Hello,
check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
you can use the template role to dfine your own roles for Key User: S_RS_RREDE BI Role: Reporting Developer (Development System)
Hope it help
regards

What is the mac pro reset function key?

what is the mac pro reset function key?

Sorry, but what "reset function key" are you referring to? What is it you wish to reset?

HT1420 Where is the "authorize this computer" function?

Where is the "authorize this computer" function in the iTunes store?

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Altrenatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Authorization to run function module

I am facing a peculiar problem, We have 2 kinds of users in the system, one with debug display rights and other rights that a developer has, the second user has got authorization for TCODES and is a end user, i.e. Order-Delivery-Billing Rights.
Now in the billing exit we have put a Function Module, which will do the some back end movement for the user. Now the dilemma is, the user with debug rights is able to do the transaction and the function module runs at the back end without the knowledge of the user, but when the end user runs the same T Code, the function module doesnu2019t run at the back end.
How do I give authorization to the end user, so that function module runs in his ID even though he does not have debug rights, or what object has to be attached to the user??

Execute the transaction SU53 just after run the program with the invalid user.
This transaction shows yous what is the authoritation that is failed.
Regards,

What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?

Hi experts,
I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions:
1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called at background task, what is the sequence of them? How many conditions will trigger the running of these FMs?
2 Where can I find the log of this pending FMs? In SAP library, it says there are 2 tables. But I checked these tables and can only find the FM name and user of it. And I can not understand content of these tables. It seems one is for the main information of FM, and the other is for the data of the FM, maybe the parameters.
3 If I call a FM in this way, Can I canncel it before the next commit work in some way?
Finally, thanks for reading and help.

HI,
When the COMMIT WORK statement is executed, the function modules registered for the current SAP-LUW are started in the order in which they were registered. ROLLBACK WORK deletes all previous registrations for the current SAP-LUW.
If the specified destination is not available when COMMIT WORK is executed, an executable program called RSARFCSE is started in background processing. By default, this tries to start the function modules registered for a SAP-LUW in their destination every 15 minutes and up to 30 times. These parameters can be changed in the transaction SM59. If the destination does not become available within the defined time, it is recorded in the database table ARFCSDATA as the entry "CPICERR". The entry in the database table ARFCSSTATE is deleted after a standard period of eight days

What is the purpose of Destination Function on Submit Button?(Doesn't work)

Hi Gurus,
There is a property "Destination Function" on Submit buttons.
What is the purpose of this field.
I tried setting some values here expecting following behavior in order:
1. Process Form Request will get executed.
2. User will be navigated to the OAF page related to the Destination Function.
Destination Function property probably point to setInvokeFunction method of the OASubmitButtonBean.
Please advise on this.
Thanks and Regards,
Prince

Question 2. What is the purpose of View Instance on Submit Button? Is it there for BoundValues? Any examples how can we use this?
Question 3. Related to Question 2, What is the purpose of View Instance and View Attribute on Button?

What is the latest Mac running 10.8

I am planning to buy a new iMac. I understand that the iMacs Apple is selling now will not run 10.8. While I can afford to buy a new iMac I can't affordto buy and relearn all the key software which will not run on Maverics. I recently went through that when updating to 10.8 after waiting years for software to become compatible.
What is the latest iMacs I can buy that will run 10.8?

If it can run Mountain Lion then it can run Mavericks, so that is what will be installed unless you buy a used one. The most recent iMac will run a special build of 10.8.5. 10.8.5 retail should work on all eligible iMacs which are the same models that can also run Mavericks.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

What's the authorization to run function CSAP_MAT_BOM_OPEN

Similar Messages

Maybe you are looking for