What's the best way to write freehand with InDesign?

I have a Wacom and want to place some handwriting on my document - what's the best way to do this?

Try the pen or pencil tools or do it in Photoshop and place it.
Bob

Similar Messages

  • What is the best way to stream sports with Apple TV

    What is the best way to stream sports with apple TV

    Your question is a little too broad. Hard to know what sports you are talking about.
    If you have a newer Mac, you can use airplay to mirror anything on your Mac to your apple tv. Or use the ESPN app.
    But a lot of sports just can't be streamed as they are available, though I bet this year sees a lot of new livestreams on sports on YouTube or Ustream.
    Hugh

  • What's the best way to connect Cognos with SAP 4.6c on iseries V5R4

    We have SAP 4.6c on iseries V5r4.
    What's the best way to connect Cognos with SAP so that data could be extracted from SAP and create reports with Cognos.
    Thanks
    Joe

    DB2 Connect version 8.2 is no longer supported by IBM (support ended April 30, 2009, see http://www.ibm.com/software/data/support/lifecycle/). As far as I know, DB2 Connect is communicating through DRDA, which is a platform-independent protocol supported by all DB2 platforms, so any DB2 Connect client should be able to talk to any DB2 database. However, there may be limitations on the supported release combinations.
    Kind regards,
    Christian Bartels.
    Edited by: Christian Bartels on Sep 6, 2010 4:17 AM

  • What is the best way to write management pack modules?

    i have written many modules using powershell script but when i deploy that management pack on SCOM it is throwing so many errors saying powershell script has dropped due to timeout.
    My Mp has lot of powershell script which gets the data from the service which executes for each and every instance the mp certainly has around 265 Instances and the powershell have to execute for each and every instance.
    how can i improve the scripts?
    do i need to use someother scripting language like javascript or VBScript in the management pack to execute different modules.
    what is the best practice to write Modules
    i have useed even the cookdown for multi instance data gathering
    Thanks & Regards, Suresh Gaddam

    One thing you have not mentioned is how you are consuming the data after you save it.  Your solution should be compatible with whatever software you are using at both ends.
    Your data rate (40kS/s) is relatively slow.  You can achieve it using just about any format from ASCII, to raw binary and TDMS, provided you keep your file open and close operations out of the write loop.  I would recommend a producer/consumer architecture to decouple the data collection from the data writing.  This may not be necessary at the low rates you are using, but it is good practice and would enable you to scale to hardware limited speeds.
    TDMS was designed for logging and is a safe format (<fullDisclosure> I am a National Instruments employee </fullDisclosure> ).  If you are worried about power failures, you should flush it after every write operation, since TDMS can buffer data and write it in larger chunks to give better performance and smaller file sizes.  This will make it slower, but should not be an issue at your write speeds.  Make sure you read up on the use of TDMS and how and when it buffers data so you can make sure your implementation does what you would like it to do.
    If you have further questions, let us know.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • What is the best way to start "fresh" with iPhoto '08?

    I am running iPhoto '08 on a mid-2007 iMac. When I set up the machine, I moved all the photos from my PC to the Mac retaining the existing directory structure that I had on the PC. I then imported all the pictures into iPhoto with no problems.
    Unfortunately, the other person who uses the Mac needs to be able to use the directory structure as it existed on the PC (that structure involves several subfolders with specific names etc.), and it appears that iPhoto is not designed to work that way. I know the photos can still be manipulated in the folders I imported, but then I run the risk of at best, being out of synch with iPhoto and at worst, corrupting iPhoto completely.
    That said, what I would like to do is delete or remove the current iPhoto library (or whatever iPhoto accesses; not the whole application unless necessary) and then selectively import photos to iPhoto. That way, the other user can access the photos in the familiar folder structure and manipulate them at will without disturbing the iPhoto db and, once photos are edited etc. and ready for primetime, they can be imported to iPhoto to gain the advantages of displaying using Front Row etc.
    My question is what is the best way to achieve what I am looking for? Just backup then delete the iPhoto pkg file in the HD/Library/Receipts folder? Uninstall the entire application and start over?
    All assistance greatly appreciated.

    ETRA
    Welcome to the Apple Discussions.
    You don't need to re-install iPhoto, just change the library - and you may not even need to do that.
    1. You can easily recreate your Directory structure in iPhoto. Simply start at the bottom of your structure and drag a folder of images to the Source (or left hand) pane of the iPhoto Window. iPhoto will create an Album of the same name. The create your enclosing folders (File -> New Folder) and drag the albums to it. This way you can quickly recreate what you have/
    2. The other user of the files can access them directly via the iPhoto Window or a Media Browser such as THIS. The advantage of this system is that your directory structure is available to them ina convenient and recognisable way. They can then drag the pics from the iPhoto Window / Media Browser to the app they as the need. (A whole lot faster than fumbling around in Folder after Folder etc, plus the advantage of keyword searching.)
    3. Is this necessary for working with an editor? You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. Btw this is the only way that edits made in iPhoto will be visible in iPhoto.
    4. Finally, if you do wish to go as you described: Simply trash the iPhoto Library from the Pictures Folder. Start iPhoto and it will create an new empty library. If you wish to recover the files from the Library first, then Right Click on the iPhoto Library and go 'Show Package Contents'. Your files are in the Originals Folder.
    Regards
    TD

  • What is the best way to place image (with caption) in a Book?

    I am preparing a template for an Encyclopedia project, The Encyclopedia will be in more than 10000 pages, so what is the best way to place images (Photos, Graphs, illustration ...etc) with a caption?
    The problem that when I modify text; the image don’t move with it, and when I place it within the text, it's difficult to control text flow.
    Please Help

    Thank you Peter,
    it's a bit dificult to control anchored object -speacially in two colum text box- when placing image in one and half colum size, it wont move to first column.

  • What is the best way to sync contacts with a webdav host?

    I'm using Thunderbird and Android Contacts as client apps along with a owncloud 8 hosted remotely. I've activated the Contacts app on Owncloud and now I want to sync the contacts between all of these systems. What is the best way to do this?
    I'm trying to get Thunderbird sorted first. I've tried Addressbooks Synchronizer but this currently gives me either a message telling me that my credentials are wrong or sits silently doing nothing. I'm aware that this is a file sync, not record sync method, so it isn't ideal anyway.
    Is there a better, proper sync, method that I can use? I refuse to thing that this is an unreasonable request or that no one has asked it before me, but I just can't seem to find the answer.
    Thanks,Martin

    webdav my initial reaction was the sogo connector.
    These guys recommend the same http://kb.mozillazine.org/Sharing_address_books
    Here http://www.sogo.nu/english/downloads/frontends.html

  • What is the best way to write 10 channels of data each sampled at 4kHz to file?

    Hi everyone,
    I have developed a vi with about 8 AI channels and 2 AO channels... The vi uses a number of parallel while loops to acquire, process, and display continous data.. All data are read at 400 points per loop interation and all synchronously sampled at 4kHz...
    My questions is: Which is the best way of writing the data to file? The "Write Measurement To File.vi" or low-level "open/create file" and "close file" functions? From my understanding there are limitations with both approaches, which I have outlines below..
    The "Write Measurement To File.vi" is simple to use and closes the file after each interation so if the program crashes not all data would necessary be lost; however, the fact it closes and opens the file after each iteration consumes the processor and takes time... This may cause lags or data to be lost, which I absolutely do not want..
    The low-level "open/create file" and "close file" functions involves a bit more coding, but does not require the file to be closed/opened after each iteration; so processor consumption is reduced and associated lag due to continuous open/close operations will not occur.. However, if the program crashes while data is being acquired ALL data in the buffer yet to be written will be lost... This is risky to me...
    Does anyone have any comments or suggestions about which way I should go?... At the end of the day, I want to be able to start/stop the write to file process within a running while loop... To do this can the opn/create file and close file functions even be used (as they will need to be inside a while loop)?
    I think I am ok with the coding... Just the some help to clarify which direction I should go and the pros and cons for each...
    Regards,
    Jack
    Attachments:
    TMS [PXI] FINAL DONE.vi ‏338 KB

    One thing you have not mentioned is how you are consuming the data after you save it.  Your solution should be compatible with whatever software you are using at both ends.
    Your data rate (40kS/s) is relatively slow.  You can achieve it using just about any format from ASCII, to raw binary and TDMS, provided you keep your file open and close operations out of the write loop.  I would recommend a producer/consumer architecture to decouple the data collection from the data writing.  This may not be necessary at the low rates you are using, but it is good practice and would enable you to scale to hardware limited speeds.
    TDMS was designed for logging and is a safe format (<fullDisclosure> I am a National Instruments employee </fullDisclosure> ).  If you are worried about power failures, you should flush it after every write operation, since TDMS can buffer data and write it in larger chunks to give better performance and smaller file sizes.  This will make it slower, but should not be an issue at your write speeds.  Make sure you read up on the use of TDMS and how and when it buffers data so you can make sure your implementation does what you would like it to do.
    If you have further questions, let us know.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • What is the best way to setup iTunes with my current configuration?

    I currently have an iPhone 5 and a new iPad. My wife has the iPhone 4S. I do all the syncs (even my wifes) on the same Windows 7 machine. She has a different apple ID than I do and I share one apple ID accross my iPhone and iPad.
    I have a Windows Home Server 2011 box that stores all my photos and music files. I am able to connect to the box from the Windows 7 machine without issue. I have several media diretories. One of the directories contains all my iTunes music and another seperate directory contains all my photos.
    Here is the question. If I want to sync my iPhone 5 and my new iPad so that I download all the music files and photos how should I setup iTunes? How should I sync my wifes iPhone so she gets all the Photos and music files? One of my chief concern is being able to automatically sync apps and  "new" photos taken from either phone back to my file server photo directory.

    Migration Assistant is the best way to get everything.

  • What is the best way to maintain models with common components?

    I work for a company that uses MatrixX/SystemBuild (v62.2) to build functional models of trains for use in driver training simulators.  We are currently in the early stages of a project in which we will need to build and maintain multiple train models which are likely to have some common components, but may have some significant differences.  Before we get too far into the modelling, I would like to come up with a decent method of maintaining the common components while keeping the differences separate.
    Ideally, I would like to find a way of quickly and easily determining the difference between two models and a way of conditionally pushing the differences from one model to another - in a similar way that one might diff two text files and conditionally copy the changes in one to another.
    I found a script (mx_62.2\sysbld\scripts\compare_catalogs.msc) that seems to accept two catalogs for comparison, outputing a difference log. However, I'm unsure how to use this as I don't know how to load two catalogs within the same instance of Xmath or how to assign a catalog to a variable for passing in to a function.  Does anyone know how to use this script?
    I am also thinking that it might be useful to be able to convert a catalog to an xml - I can probably write a script to do this, however I am wondering if there's anything freely available to do this.
    Does anyone have any other ideas?

    Let me first discuss about comparing models, then I'll talk about my ideas about modularization.
    Comparing models in anything before v8 is difficult. In v6 or v7, there's no way to load to separate files containing the same yet different superblocks. The tool scripts you found don't seem to be documented anywhere. Given the history of some of the things added into the product, I'm not surprised. Which means that it's useless to us. After looking at the scripts, it's difficult to figure out what the inputs to that script should be. You can launch multiple instances of xmath/sysbld and load the models separately, but that's about it.
    One suggestion if you have to compare models is to use the exportcatalog.msc script which will generate a text file containing the SBA commands to re-create the model. Do the same for both models then perform a text difference between the generated SBA commands in the generated files.
    Another possibility is to use SBA to get the details of each superblock (similar to exportXXX.msc scripts) into a form that's easier to compare between. I'm going to guess that some kind of generated SBA content is the expected input to the compare_catalogs, but I'm not sure.
    Now, within v8, we've created a hierarchical compare tool, that compares model files and shows differences. Copying changes between the compared models is a future enhancement. However, in the context of using v8, you could manually copying the changes between the models using the editor and/or project system as appropriate. Yes, in v8 you can separately load models containing the same named superblocks. Try it, I'll bet you'll like it and it will save you lots of time!
    Now, on to modularization. I'm not sure you're use of 'components' is the meaning of the Components feature in Sysbld or not. I'm going to assume that you are not using Components and you're generically using the term components as a set of logically related superblocks, or as I perfer to call them, a module.
    The only modularization tool you have in Sysbld is the file. What I mean here is that you are able to group sets of superblocks into separate savefiles (.sbd) then combine them to create a complete model. So, essentially, you will need to partition your model into modules and each module is a separate savefile. Then, you can choose which module (i.e. savefile) to load to construct a complete model.
    In v8, there's a project system specifically designed to make this kind of modularization within a project easy and straightforward to use and maintain. I'd suggest that you use v8.
    For previous versions, the best you can do is create xmath scripts for each complete model you need. The script will contain all of the steps needed to load the separate modules to make a complete model. Thus, you'd have a different script for each model. Also, becareful in v6,v7 that you'll have to manually manage which superblocks are part of which modules, it's tricky stuff. Again, you'll need to use scripts to help maintain this level of complexity in these versions of the Sysbld.
    Now, I do not want to recommend FileSuperBlocks, it's a legacy feature to deal with limited resources not applicable on today's machines.
    Also, I can't really recommend the the Component feature in Sysbld. It's really not a component, but more of an object, sort-of. And it sort-of gives you unique names and it sort-of gives you parameters. It will not help with the modularization I think you want so don't use these.
    In general, there are features within our latest v8 release of MATRIXx that will help you with all of your issues. If you can, upgrade!
    Bob Pizzi
    MATRIXx R&D

  • What is the best way to keep up with "RED" agents?

    TES 6.03.265
    Hello all,
    I'm fairly new to Tidal, and have a question mainly for those managing a hundred or more agents.
    We have several hundred agents, and it is difficult for the operators to track & follow-up on all of the "RED" agents.
    In the GUI, one cannot sort by "red or green"....and the other view of agents -  the "master" view of connections -  does not distinguish between disabled agents and broken (red) agents...it shows them all as "grey".
    We REALLY need for our operations team to worry about RED agents....not so much the disabled agents (which are grey in both views).
    A job that runs at a regular interval, and emails a list of any "RED" agents that it finds....would probably work just fine for us, if nothing better was available.
    But I can't figure out the query....the closest I can get is to report on all inactive agents with "null" time zones....but I have seen where agents are green with no timezone (the master's agent) and red WITH a timezone (an aix agent)....so that is not 100% reliable.
    I guess my question boils down to this:  how does that agent status dot turn "RED"?
    Is that value extracted from a table, or does something trigger it to go red?
    What does everyone else who manages hundreds of agents do to keep up with all the RED ones?
    Thanks, - Steve

    Thanks Tracy,
    Guess I need to drill down a bit deeper.
    My goal is to give the operators the ability to take a list of "RED" jobs - that they could generate by running a "report" or running a "report job", or by grouping them together in the client so they could copy/paste only the rows with RED dots....anything to generate a list that they could save as a txt file or attach to an email to another team, things like that. Sometimes we have a lot of broken agents to keep up with.
    I've had mixed results with the alerts/events, anyway, in terms of general monitoring...sometimes we have a lot of agents that go from green to red back to green before the operator could even isolate the agent in question....a lot of false alarms...tweaking the timeout settings didn't help much, and a value too big seems to hang up the agent processes...not a good thing.
    Thanks again for the response!
    -Steve

  • What is the best way to geotag photos with data from GPS Tracker Log (GPX format)?

    I just returned from a 4 month trip to Southeast Asia. Before I left, I set the time on my camera, a Canon 7D, to match the GPS time on my GPS tracker, a QStarz BT-Q1000X. Both times were set to UTC, also known as GMT.
    I have imported the data from the GPS log into Aperture as a GPX file. Now I would like to sync the location metadata on my photos with the data from the GPS log. How can I do this using Aperture 3?
    I seem to be having two problems:
    Aperture wants to shift the times based on which part of the track I drag the images onto. Since the camera and gps tracker times were sync'd, I do not want any shift.
    The time shifts that are displayed are 12 hours and a few minutes, rather than 0 hours and a few minutes.
    A few additional notes:
    When I imported the GPS track, Aperture automatically changed the time zone of the track to Asia/Ho Chi Minh City, which is correct (GMT+7).
    I have batch changed the images from Camera Time: UTC to Actual Time: GMT+7
    The time on my computer is US/Eastern Daylight Time (GMT-4), or Eastern Standard Time (GMT-5) when the photos where taken.
    Since I was gone for so long, and my GPS tracker memory is limited, I set the tracker to record a trackpoint once every 60 seconds.
    Is there a solution to my problems using Aperture 3, or should I start looking for third party applications to geotag the photos before importing them into Aperture?
    Thank you.

    I think the 12 hour discrepancy is more likely a result of the 12 hour difference between GMT+5 and GMT-7. The dates and times of the photos and the GPS track are displayed properly in Aperture. See the images below.

  • What is the best way to import Freehand files to InDesign?

    Has anyone developed a fast workflow to convert Freehand files intact to InDesign CS3?
    Illustrator CS3 will import Freehand files directly, but from there I cant bring editable and formatted text into ID CS3. Formatted text is converted to paths via the clipboard. This is incredibly frustrating.
    Till recently I used "Copy Special" within Freehand MX which allowed a reasonably useful way to copy graphics and fully-editable and formatted text across to ID. This is too slow for multiple FH pages however.
    Adobe have provided a useful tool to open Freehand files via Illustrator but why on earth didnt they see that many Freehand files are set up as page layouts and are better placed into InDesign?
    Any constructive ideas or successful workarounds most appreciated. Thanks. JETNZ

    > Maybe I don't appreciate the robust functionality of FH.
    I can't let the Freehand-bashing go undefended.
    Freehand was never "just" an illustration program. And for many people, it was the "only" page layout program available.
    b Freehand had a huge following in Israel
    where it was the first multi-page program that allowed people to set type in Hebrew (right to left). For small documents (I always put a limit of 20 pages), Freehand was a terrific product.
    b Freehand has a huge market share in South Africa.
    During the years of apartheid, many American companies, including Adobe, honored the boycott of doing business in South Africa. Macromedia chose not to honor the boycott. Therefore Freehand became the only program available. I don't justify the decision to do business in SA, but it explains why people used Freehand.
    Apart from market share, there were also many legitimate reasons to use Freehand as a page layout program:
    b Freehand had a "wrapping" tab feature
    that made it unnecessary to put tabbed text into separate boxes as Quark and PM required. This wrapping tab is still unique to Freehand and would be a bonus in many word processing and layout programs.
    b Freehand has different sized pages
    in the same document. How many times have I heard people ask for such a feature here? Yet Freehand has it where Quark, PM, and ID don't.
    b Freehand has some of the most advance selection tools
    in the business. I'm thinking of the ability to select items within a range of stroke weights as well as other attributes. Again neither Quark, PM, or ID have such a feature. And even Illustrator, which has a "Magic Wand" selection tool can match Freehand's selection dialog box.
    There are other features, but I don't need to go into them.
    However, I do agree that Macromedia did not give Freehand the time and attention it needed to do well in today's market.
    The code is ancient.
    The output to PDF directly from Freehand is stuck back on Acrobat 5.
    Some of the transparency features are not what we consider true transparency.
    And so on.
    But to just lump anyone who uses Freehand into a category of not professional is wrong.

  • What is the best way to write a math book?

    should i use graphic tablets such as wacom,smartpen etc. or should i type it using a program like math type.
    thanks for replies.

    should i type it using a program like math type.
    Yes.
    http://m10lmac.blogspot.com/2008/12/typing-equations-and-formulas.html
    But for serious math publications I think LaTeX is often used.

  • What's the best way to measure area in InDesign?

    Hi all,
    I'm trying to perform a square inch analysis on a retail catalogue.
    For this, you have to measure the area a product and supporting copy takes on a page, then calculate the sales, revenue etc. to find your £/in2.
    Now, I'm aware Acrobat has a 'Measure Area' tool, but due to bugs/poor programming it simply isn't working on my Retina Macbook Pro (XI Pro) and maxes out the CPU just by drawing lines.
    So, is there any catalogue designer here who has a solution, uses a plugin or script or third party software for measuring area?
    Thanks    

    andrewrobinsonuk2 wrote:
    Hi all,
    I'm trying to perform a square inch analysis on a retail catalogue.
    For this, you have to measure the area a product and supporting copy takes on a page, then calculate the sales, revenue etc. to find your £/in2.
    Now, I'm aware Acrobat has a 'Measure Area' tool, but due to bugs/poor programming it simply isn't working on my Retina Macbook Pro (XI Pro) and maxes out the CPU just by drawing lines.
    So, is there any catalogue designer here who has a solution, uses a plugin or script or third party software for measuring area?
    Thanks    
    I see you've got some good leads to a scripted solution. I have a question which may be more difficult to answer: I'm assuming you're in the UK. If that's correct, whoever wants to measure the price per area in pounds sterling per square inch? I mean, you've got Euros, and almost everything is metric, so why not Euros/cm2?
    Seriously, I wonder if the scripts take the bounding rectangles' stroke thickness into consideration when calculating area. Thickness is one aspect, and placement is another; strokes can be centered on the boundary, or be completely inside or outside.
    Also, perhaps the computation process could be automated a bit further if there was a way to select the measurement rectangles and apply a unique identifier for the set that comprises each item. Perhaps the catalogue number could be captured, or a unique object style name could be created. Then iit could be possible to compute the area of each unique product's group, and perhaps go further to export to a text or spreadsheet file.
    This could save lots of time, effort, and errors, if this is an ongoing requirement and the number of items is more than a few.

Maybe you are looking for

  • Filename in CFHeader

    I'm using the following to export a CSV file: <cfheader name="Content-Disposition" value="attachment;filename=download.csv"> <cfcontent type="text/csv" reset="yes"><cfoutput>#variables.output#</cfoutput> This works fine in IE, but in FF the filename

  • How can I get iphoto to display my library?

    Here's the situation. My iphoto library is on an external drive and was running on an old version of iPhoto. Moved to a new imac and Mavericks and the new version of iPhoto. I have opened iPhoto and addressed it to my library on the external drive th

  • Is there a way to change the default print tray on an HP LaserJet 500 color M551 Printer

    Hi Is there a way to setup the default print tray for a HP LaserJet 500 color M551 printer to be tray 2 printing both online and direct? If so what would be the best way to go about implementing it? Thanks This question was solved. View Solution.

  • What is it with PrPro playback...???

    I double click on an avi file from the hard drive (copied over from my camera) and Windows Media Player opens and it plays perfectly at 1280x720x30fps. I import that same file into PrPro CS4 and open it in the source monitor and it jerks and skips. M

  • How to add an upbeat note at the beginning of song?

    At the beginning of some songs you have that first up beat before the first down beat of a 4/4. Is there a way to add this on an ipad version? Thanks for your help!