What is the best way to write management pack modules?

i have written many modules using powershell script but when i deploy that management pack on SCOM it is throwing so many errors saying powershell script has dropped due to timeout.
My Mp has lot of powershell script which gets the data from the service which executes for each and every instance the mp certainly has around 265 Instances and the powershell have to execute for each and every instance.
how can i improve the scripts?
do i need to use someother scripting language like javascript or VBScript in the management pack to execute different modules.
what is the best practice to write Modules
i have useed even the cookdown for multi instance data gathering
Thanks & Regards, Suresh Gaddam

One thing you have not mentioned is how you are consuming the data after you save it. Your solution should be compatible with whatever software you are using at both ends.
Your data rate (40kS/s) is relatively slow. You can achieve it using just about any format from ASCII, to raw binary and TDMS, provided you keep your file open and close operations out of the write loop. I would recommend a producer/consumer architecture to decouple the data collection from the data writing. This may not be necessary at the low rates you are using, but it is good practice and would enable you to scale to hardware limited speeds.
TDMS was designed for logging and is a safe format (<fullDisclosure> I am a National Instruments employee </fullDisclosure> ). If you are worried about power failures, you should flush it after every write operation, since TDMS can buffer data and write it in larger chunks to give better performance and smaller file sizes. This will make it slower, but should not be an issue at your write speeds. Make sure you read up on the use of TDMS and how and when it buffers data so you can make sure your implementation does what you would like it to do.
If you have further questions, let us know.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Similar Messages

What's the best way to write freehand with InDesign?

I have a Wacom and want to place some handwriting on my document - what's the best way to do this?

Try the pen or pencil tools or do it in Photoshop and place it.
Bob

What is the best way to write 10 channels of data each sampled at 4kHz to file?

Hi everyone,
I have developed a vi with about 8 AI channels and 2 AO channels... The vi uses a number of parallel while loops to acquire, process, and display continous data.. All data are read at 400 points per loop interation and all synchronously sampled at 4kHz...
My questions is: Which is the best way of writing the data to file? The "Write Measurement To File.vi" or low-level "open/create file" and "close file" functions? From my understanding there are limitations with both approaches, which I have outlines below..
The "Write Measurement To File.vi" is simple to use and closes the file after each interation so if the program crashes not all data would necessary be lost; however, the fact it closes and opens the file after each iteration consumes the processor and takes time... This may cause lags or data to be lost, which I absolutely do not want..
The low-level "open/create file" and "close file" functions involves a bit more coding, but does not require the file to be closed/opened after each iteration; so processor consumption is reduced and associated lag due to continuous open/close operations will not occur.. However, if the program crashes while data is being acquired ALL data in the buffer yet to be written will be lost... This is risky to me...
Does anyone have any comments or suggestions about which way I should go?... At the end of the day, I want to be able to start/stop the write to file process within a running while loop... To do this can the opn/create file and close file functions even be used (as they will need to be inside a while loop)?
I think I am ok with the coding... Just the some help to clarify which direction I should go and the pros and cons for each...
Regards,
Jack
Attachments:
TMS [PXI] FINAL DONE.vi ‏338 KB

One thing you have not mentioned is how you are consuming the data after you save it. Your solution should be compatible with whatever software you are using at both ends.
Your data rate (40kS/s) is relatively slow. You can achieve it using just about any format from ASCII, to raw binary and TDMS, provided you keep your file open and close operations out of the write loop. I would recommend a producer/consumer architecture to decouple the data collection from the data writing. This may not be necessary at the low rates you are using, but it is good practice and would enable you to scale to hardware limited speeds.
TDMS was designed for logging and is a safe format (<fullDisclosure> I am a National Instruments employee </fullDisclosure> ). If you are worried about power failures, you should flush it after every write operation, since TDMS can buffer data and write it in larger chunks to give better performance and smaller file sizes. This will make it slower, but should not be an issue at your write speeds. Make sure you read up on the use of TDMS and how and when it buffers data so you can make sure your implementation does what you would like it to do.
If you have further questions, let us know.
This account is no longer active. Contact ShadesOfGray for current posts and information.

What's the best way to coordinate loading multiple modules.

I have a number of resource modules that I'd like to load before loading my main UI module.
I'm doing this now, but to make sure that everything loaded OK, I need to have a chain of Event.COMPLETE callbacks for every resource module load.
In other (threaded) languages, I'd set a flag and run a wait on my main loop before loading the UI module.
Is there a good compact way to wait for n modules to load in Flex?

I don't think you need a chain if load order doesn't matter. Just keep a
Dictionary of them and remove them from the Dictionary as they load. Then
run a quick test of the Dictionary has any items left.

What is the best way to write a math book?

should i use graphic tablets such as wacom,smartpen etc. or should i type it using a program like math type.
thanks for replies.

should i type it using a program like math type.
Yes.
http://m10lmac.blogspot.com/2008/12/typing-equations-and-formulas.html
But for serious math publications I think LaTeX is often used.

What is the best way to apply Support Pack Stacks among satellite systems

Hi,
We have differenst systems liek R3, SCM,CRM,XI, BW and EP. We would like to apply teh support pack stack 12.
Which land sacpe need to be applied with the stack first?
R3 or other satellite systems? Is there any recommendation available from SAP on this?
Thanks in advance
Jnaneswar.P

Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

What's the best way to manage Apple IDs for multiple devices?

Hi,
We have
a shared Macbook air
a shared iPad
my iPhone
his iPhone
We want to put one ID on the Macbook and iPad that we can use to have the same iMessage on both and that we can put a card on and use in the iTunes store etc.
We also want to have our own iMessages on our iPhones, plus be able to use the account with the cards on them to purchase and share across devices...
What's the best way to manage them all?

Welcome to the Apple Community.
iTunes is straight forward, just use the same ID on all of them.
What exactly do you want to see in messages on the Mac and iPad, messages combined from each of your phones or a different account just for both of you.
You should think about what you want in calendars, contacts etc, on your shared devices.

What is the best way to manage photos - Dropbox (with sync), Facebook (with sync), iPhoto, etc.?

With so many cloud based and wireless syncing services, I'm lost as to the simplest way to keep photos sync'd as well as backed up. My dropbox is currently syncing all photos I take with my iphone, but in an overall folder called CAMERA UPLOADS, so they are uncategorized. I upload pics to facebook, which facebook also has a sync photos feature, but I don't necessarily want all photos uploaded to facebook. What has worked best for everyone so that there aren't a ton of dupicate photos everywhere, and multiple syncs of the same photos?
Also, what is the best way to manage my iPhone photos generally? I'm never sure if I delete a photo from my phone, does it delete it on my computer via iCloud? Sometimes I just take a picture to send to a friend that I don't need to keep, while others are ones I want to sync to my computer. Can I control when deleting that it be deleted everywhere or just on the device? And alternately, can I choose certain photos not to sync via iCloud?
iCloud makes me nervous. Once when I wanted to place all photos of my pup into a folder, I selected the photos on my iPhone and accidentally clicked delete instead of move. No big deal, I figured they'd be at home sync'd on the cloud. But since I'd deleted them on my phone, the cloud deleted them on my home computer too and the photos were lost.

I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
Regards.

What is the best way to manage my iPhoto, which is taking up too much space on my MacBook Pro?

What is the best way to manage my iPhoto, which is taking up too much space on my MacBook Pro?
Specifically, I'd like to keep some of my favorite pictures on the laptop while moving the rest to an external hard drive. Is there a way to tag just a few pictures inside an event/album as "favorite", while storing the rest in an EHD, but still keep them connected to the same event/album? I'd like to have just the favorite pictures on the laptop, but when I have the EHD connected, be able to view all my pictures in the same place, and not have to browse through separate hard drives. Ideally, whether or not a picture is designated as "favorite" will determine where it resides.
Is this at all possible?
I have only 7 GB left on my HD and I'm desperately needing a solution!
Thanks!

You need two libraries to do this. One on the external with all your Photos. One on the internal with a subset - your favourites. You do it this way to make backing up easier - that is, back up the library with everything, so you're only backing up one.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events/albums/photos you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

What is the best way to manage multiple ipods using the same itunes?

Hi Everyone
i am trying to manage three different ipods through the one Itunes, all with very different tastes, not sure if I am doing it the best or easiest way so does anybody have a simple solution on what you're supposed to do, to keep it all simple!
Cheers
Liv

If you have created a new Windows user account you need to log out and then log back in with your original user name. By default each Windows profile will have an independent iTunes library.
If instead you managed to create a new library within the same profile. click the icon to start iTunes and immediately press and hold down the shift key, keep holding until asked to create or choose a library. Click Choose and navigte back to your original which should be at <User's Music>\iTunes.
Your question as posed was:
What is the best way to manage multiple iPods using the same iTunes {library}?
in which case Selected Playlists is probably the best approach. Simply create a playlist for each device, Alice's iPod, Bob's iPhone etc. and sync the device with the appropriate list.
tt2

What is the best way to manage 5 users and 6 devices? We dont all want the same merged contacts, we dont all want the same calendar notes, music, pics etc etc.

What is the best way to manage 5 users and 6 devices? We dont all want the same merged contacts, we dont all want the same calendar notes, music, pics etc etc.

As long as it is pointed to iTunes it will be accessible via home sharing on Apple TV.
http://support.apple.com/kb/HT1751?viewlocale=en_US&locale=en_US
If these are commercial DVD's we can't comment on any conversion process.

What is the best way to manage photo's with multiple login accounts?

There are three people in my household and each has their own login into the computer. I also have and external drive. Space is becoming short on the computer, so I want to move all my photos and music to the external drive. I have moved all the music files and folders to the external drive and then each user has just updated their individual iTunes folders, pointing to the external drive.
However, what is the best way to manage photo's? Do I do this same process or is there another way? I don't want any music or photo files on the computer's hard drive at all if it can be avoided.

I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
Regards.

What is the best way to manage Videos from the iPhone 3GS

I want manage videos like pictures.
All vids is stored in my iPhoto Library.
What is the best way to sync them ?

iPhoto supports importing photos and videos from a digital camera that supports capturing video as well as photos.
If the videos were deleted from your iPhone after the iPhoto import process was complete, and you want to transfer a video or videos back to your iPhone for viewing, you need to transfer the videos to iTunes that you want transfered to your iPhone via the iTunes sync process as with any other video.

What is the best way to manage duplicate files?

What is the best way to find and manage all my duplicate files? I have a Mac Mini late 2010, Mac OSX 10.6.8.

I have never used this application, although I have considered getting it a few times.
http://macpaw.com/gemini
It's not free, but there is a free demo. If that means anything, the App Store sells it.

What is the best way to manage the file space given how much GB the video clips use up?

I just downloaded a years worth of video off my HD camera. I took up 125 GB on my hard drive. What is the best way to manage this content going forward as there will be a lot more video to come in future years with small children!

rule of thumb:
SDef ~13GBs/h
HDef ~30-40GBs/h ...
latest investment of mine:
ext.HDD, usb2 (=I have no trouble using usb2 for editing my short projects), 1.5TB=70€ ...
... which adds to ~4.2TB for my hobby, incl. back-up drives ...

What is the best way to write management pack modules?

Similar Messages

Maybe you are looking for