What's the bottom timeline for?

I'm doing mass edits on several videos
I duplicate existing clips and replace videos
I also speed up the video clips
There is a bottom line below the main timeline
What is this? Should the lenght of this match my video?
What if it's too short? Or too long?
Thanks
Omar

Yep. Uh huh.
Q "connects" clips so they appear on the SECONDARY story line. (They're actually "connected" to the PRIMARY story line.)
D "overwrites" clips to the PRIMARY story line.
You can transition from the scondary story line to a clip below in on the primary story line, by adding a transition.
Having said that..
Provided BOTH clips have a connection point to the primary story line, there's no reason why you shouldn't be able to "drag" TWO clips to meet each other on the secondary story line.
Omar... Don't take this the wrong way, but... this is a BASIC function convered in a tutorial. Go at it! Have fun! Once you get past the anxiety of leanring this stuff you're good to go!

Similar Messages

Infinity not coming to Cabinet. What's the bottom ...

Hi guys,
I've known BT Infinity is coming to our exchange for quite a while now and since it's supposedly accepting orders from 1st Sept (I know this is an estimate), I decided to check the cabinets on dslcheck.bt.com. It seems ours is the only one not getting upgraded. I have to admit, we're quite a way out and the cabinet doesn't provide many houses with broadband. However, it's still a massive downer as we were all pretty excited. Weirdly, when I put in our postcode (which on a map takes us a couple of hundred meters away from the house) it says the FTTC, so it must be coming relatively close. Anyway, what I really want to know is, what's the bottom line? Is it possible to request a cabinet to be upgraded or is it just too much work to upgrade a cabinet (out of interest could someone explain what actually gets done when they upgrade a cabinet)?
Thanks,
Mike

Hi Mackey18,
If your exchange area is being upgraded via the Openreach Superfast broadband Commercail scheme then your cabinet may not be included in the current scheme for many reasons eg not commercially viable, planning issues, ect. You can try email [email protected] with your landline number, address, postcode and pcp (cabinet) number to see of there is any plans or your cabinet.
If your exchange area is being upgraded with superfast broadband via your local council/authority's BDUK scheme then your will need to contact your council for more information.
Hope that helps,
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

WhatÃÂ¢ÃÂÃÂs the best practice for this scenario?

Hi,
My users want the ability to change the WHERE and/or ORDER BY clause at runtime. They may define user preferences on each screen ( which is bind to a view object). They want to see the same records based on WHERE/ORDER BY defined on the last visit. That is why I keep the users preferences and load the screen based on that, using :
View.setWhereClause(...);
View.setOrderByClause(...);
View.executeQuery();
This works good when only one user working with the application but faced low performance when more than one user working with the application.
What are the points to increase the performance and what is the best practice for this scenario?
Thanks for your help in advance.

Sung,
I am talking only about 2 users in my testing. I am sure i missed something but could not recognize that.
This page is my custom query page including a tag to instantiate app module in stateful mode at the top <jbo:ApplicationModule..> and a tag to instantiate data source <jbo:Datasource...> and release tag at the bottom <jbo:ReleasePageResources..> and some java code in the middle(body). The java code constructed the query statement and then fires the query to set the view object based on the query statement using the above methods.
So, I am facing very slow performance(speed) when two clients load this page at the same time. Looks like the entire application locks for others when one client load this page and fire the query. i realized the battle neck is where executeQuery() is executing.
what do you think.
Thanks in advance for your comments.

What is the bypass code for lock screen

what is the bypass code for the lock screen on i pod touch

To restore the iPod to get rid of the lock combination you forgot, just follow these steps....
1) Plug your iPod into the PC
2) Wait for iTunes to sync your device like normal and let it back up all of your stuff, since restoring deletes all of your data
3) Go onto your iPod's menu (The one that shows the memory bar at the bottom)
4) Locate the Restore button on the screen and click restore
5) If your not on iOS 5.0.1 yet, it will ask you to download the latest firmware, go ahead download it
6) When it is done downloading it will take you through the restoration process.
7) When it asks you if you want to restore it from a backup or set up as new when everything is finished, make sure you select "Back up as new"!!!
8) Re-Sync your music, apps, photos, mail, contacts, etc. and anything you had before, and you device is just like new.

What is the phone number for AppleCare?

What is the phone number for AppleCare?
Thank You
Justin Mahone

Click on the Contact Us link at the bottom right of this website and/or go to the AppleCare website.

My daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks

my daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks

If you know that you will not be asked to design GUI interfaces, and the C programming course will adhere to command line compilation environments, then get the Xcode command-line developer tools, and skip the extra complication of Xcode until you absolutely need it. Apple has kicked GNU C to the curb and is rightly so, using Clang/LLVM compiler technology.
Sign up for a free Apple Developer account using your Apple ID, and then visit the Mac Dev Center, and towards the bottom of the page, you will see additional downloads. Click on the associated, all down loads link. Know your OS X version beforehand, as the command-line tool releases are tied to general operating system versions, and the most recent Xcode version. That said, there are currently two March 9, 2015 command-line tools for Xcode 6.2 — one for OS X 10.9 Mavericks, and the other for OS X Yosemite.

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

What is the best app for address labels and mail merge?

What is the best app for address labels, mail merge and keeping track of customers information?

Whilst this will work, it's intended for merging information (e.g. producing personally-addressed letters to a list of people).
If you simply want address labels, open Contacts and then choose which contacts you want (either a group or hold down Cmd and click on those you want - if they're together, click on the first and use Shift when you click on the last). No need to select any if you want all.
Then press Cmd-P and click on Show Details (at the bottom). Choose Labels (at the right hand side) and choose the size labels you have. You can even adjust the font and colour if you wish.

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

What are the field names for below mentioned

Hello Friends
What are the fields names for below tables
in EKKO
Purchase Document Date
Net Value of the purchase document.
In EKPO
Item Description
From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
How many tables involve her to build this report. and also field names, they come under which table.
Please send me this information ASAP. PLz Plz Plz..........
Regards
Praveen

You can check the fields of these tables via SE11
Purchase Document Date - EKKO-BEDAT
Item Description - EKPO-TXZ01
Net price per item - EKPO-NETPR.
Regards,
Rich Heilman

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

As you haven't told us who your email provider is, no.
There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through.

What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

mini-DisplayPort.
Regards.

What's the bottom timeline for?

Similar Messages

Maybe you are looking for