What's the data type when defining a KF to show an integer with a sign?
We want show some days difference which should be an integer with either a positive or negative sign. I used to design a KF with type of Number with "DEC - Counter or amount field with comma and sign" as the Data Type, but find it shows 25.000 if the day difference is 25 days. We want to show it as 25 other than 25.000. Then what type would we pick when defining the KF? Use Integer as the type? But we also want it to show the sign symbol.
The type field is dimmed as long as the InfoObj. is activated that I have to remove this field. I've delete all the data loaded in ODS, PSA and etc., and I have successfully remove this KF from InfoSource, but when I try to remove it from the ODS, always get the msg "Can't move/delete locked InfoObjects" even if the InfoObject is not locked (I've tried SM12 to delete all locked entries and also tried relog on, but not helpful). If someone gives any idea, I would be very appreciated on how to remove this KF from ODS and also let me what type should I use when creating a new KF which only shows integer with a sign!
Thanks
hey Siggi,
Now after I right click the ODS and select "Delete Data", the KF eventually gets removed from the ODS without any error, then I continue to delete this InfoObj.
However, when I run the InfoPackage to load data to the ODS, get a msg (see below in between two dashed lines):
Syntax error in GP_ERR_RSDRO_UPDATE, row 1,210 (-> long text)
Message no. RG102
Diagnosis
The data object "I_S_OLDDATA" does not have a component called "/BIC/Z_field".
Where Z_field is the InfoObject we deleted. With this error, that's even worse since that stops any data coming in! How to get rid of this error that we can continue to load data?
Thanks
Similar Messages
-
What is the data type for the Data Dashboard XY Graph?
Hey all,
I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
What gives? Am I missing something obvious? Thanks for the help!!
Tom
Solved!
Go to Solution.Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics. -
What is the data type for time and what to insert
Hi there
i had two attributes in a table called start_time and end_time and i want to insert time into these attrbutes e.g 10:00 and 11:00
How do i do that
what is oracle's built-in type for time???
adn how do i insert values in the table(i.e the format)
thanksThere is not Oracle type that has just a time. The DATE and TIMESTAMP data types include both the date and the time (TIMESTAMP has millisecond resolution and has optional timezone support). If what you're really interested is a time interval (i.e. 1 hour), there are some INTERVAL data types.
You have a lot of options for how to specify dates and timestamps along with format masks.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
How do i find out what is the data type of a column of a Table in oracle or SQL?
a) What if i want to find out the Datatype of a specific column in the Table.
b) How do i find the Column Datatypes?
Can anyone please help me. I am new to oracle and Trying to Learn some stuffHi,
How about doing
SQL> desc <table_name>
SQL> desc emp
Name Null? Type
EMPNO NOT NULL NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NUMBER(2) -
What is the data type of the value returned by the List box prompt in crystal
Post Author: Mudit Kothiyal
CA Forum: Formula
Hi all,
I am creating a report which has a list box prompt. When I am selecting a single value from the list box the report is working fine, but when I am selecting multiple values its not returning any data( although data is there). Does anyone know how the prompt values are passed to the report query by the crystal. I kno it passes the value to the report as an array. But how does it pass the value to the report query.
I am using command query to fetch data from the DB.
Crystal Report Version: Crystal Report XI R2.
DB: Oracle 10g
Also does anyone know how to pass the values of the list box prompt to the report query in comma seperated format.
Thanks & regards,
MuditPost Author: rcoleman
CA Forum: Formula
In regards to the latter part of your question
The following examples are applicable to Basic and Crystal syntax.
The examples assume that list is a String array consisting of the 3 elements: "Chocolate", "Vanilla" and "Strawberry".
Join (list)
Returns the String "Chocolate Vanilla Strawberry".
Join (list, "***")
Returns the String "Chocolate**Vanilla**Strawberry".
Not sure about the first part of your question,sorry. -
What is the data usage for ipad mini on stand by when connected to WIFI?
We connected 34 ipad mini's for yacht WIFI network that has internet access. Now data usage is 1GB/h higher for the all connections than before.
None of the ipad's are used for internet. My question is what is the data usage when ipad is is standby usage and how I can stop is downloading/uploading.
This slows down internet for rest of the users in same network.
Please help.Check out this Apple article -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
It'll walk you through uninstalling iTunes and the other Apple software. -
Problem when summery the data type of interval day to second
hi
i write a program calculate periods of time and summary it then i used interval day to second data type
oracle support basic 4 math operation (+,-,*,/) on interval
but although oracle does not support summary function like sum() ,avg(),count()!! this is a problem here
the walkaround it by use oracle data cartdrage advanced future like follows steps :
*1- i create type and i call it for ex: DAY_TO_SECOND_SUM_TYPE*
CREATE OR REPLACE DAY_TO_SECOND_SUM_TYPE /*TYPE as object
+(TOTAL INTERVAL day to SECOND , /* type header*/+
STATIC FUNCTION ODCIAggregateInitialize(SCTX IN OUT DAY_TO_SECOND_SUM_TYPE) return number,
member function ODCIAggregateIterate( self in out DAY_TO_SECOND_SUM_TYPE,value in interval day to second) return number,
member function ODCIAggregateTerminate(self in DAY_TO_SECOND_SUM_TYPE,returnvalue out interval day to second , flags in number) return number,
member function ODCIAggregateMerge(self in out DAY_TO_SECOND_SUM_TYPE,ctx2 in DAY_TO_SECOND_SUM_TYPE) return number
+)+
+/+
CREATE OR REPLACE TYPE "DAY_TO_SECOND_SUM_TYPE" as object
+(TOTAL INTERVAL day to SECOND ,+
STATIC FUNCTION ODCIAggregateInitialize(SCTX IN OUT DAY_TO_SECOND_SUM_TYPE) return number,
member function ODCIAggregateIterate( self in out DAY_TO_SECOND_SUM_TYPE,value in interval day to second) return number,
member function ODCIAggregateTerminate(self in DAY_TO_SECOND_SUM_TYPE,returnvalue out interval day to second , flags in number) return number,
member function ODCIAggregateMerge(self in out DAY_TO_SECOND_SUM_TYPE,ctx2 in DAY_TO_SECOND_SUM_TYPE) return number
+)+
create or replace type body DAY_TO_SECOND_SUM_TYPE as /* type body*/
static function ODCIAggregateInitialize(sctx in out DAY_TO_SECOND_SUM_TYPE) return number is
begin
sctx := DAY_TO_SECOND_SUM_TYPE(numtodsinterval(0,'second'));
return odciconst.Success;
end;
member function ODCIAggregateIterate( self in out DAY_TO_SECOND_SUM_TYPE,value in interval day to second) return number is
begin
self.total := self.total value;+
return odciconst.Success;
end ;
member function ODCIAggregateTerminate(self in DAY_TO_SECOND_SUM_TYPE,returnvalue out interval day to second , flags in number) return number is
begin
returnvalue := self.total;
return odciconst.Success;
end;
member function ODCIAggregateMerge(self in out DAY_TO_SECOND_SUM_TYPE,ctx2 in DAY_TO_SECOND_SUM_TYPE) return number is
begin
self.total := self.total ctx2.total;+
return odciconst.Success;
end;
end;
+/+
*2- i create artificial function to summary using that type let as called for ex: ds_sum as follows :*
create or replace function ds_sum( input interval day to second ) return interval day to second
parallel_enable aggregate
using DAY_TO_SECOND_SUM_TYPE
+/+
at last i used the function to summary intervals and its work so good but when the result of calculated summary value exceed the default precision of interval : INTERVAL DAY(2) TO SECOND(6)
i get an error :
ORA-01873 the leading precision of the interval is too small
Cause: The leading precision of the interval is too small to store the specified
interval .
Action: Increase the leading precision of the interval or specify an interval with
a smaller leading precision
although i can determine the precision of interval the declaration of the new type to maximum like :
+...........+
CREATE OR REPLACE TYPE "DAY_TO_SECOND_SUM_TYPE" as object
+(TOTAL INTERVAL day(9) to SECOND(6) ...........+
+.......................+
but the problem remain (in fact the error move from one functions of type to another function )
due i can't determine the precision of data type when i define function in PL/SQL it is illegal*
HOW CAN I SOLVE THIS PROBLEM AND BE ABLE TO SUMMARY INTERVAL DATA TYPE WHAT EVER THE RESULT OF SUMMARY IS HUGE
Edited by: user1193723 on Jun 18, 2009 4:35 AM
Edited by: user1193723 on Jun 18, 2009 4:36 AM
Edited by: user1193723 on Jun 18, 2009 4:37 AM
Edited by: user1193723 on Jun 18, 2009 4:38 AM
Edited by: user1193723 on Jun 18, 2009 4:38 AM
Edited by: user1193723 on Jun 18, 2009 4:40 AMhi,
Instead of 'interval day to second' in method declaration use internal datatype 'DSINTERVAL_UNCONSTRAINED'.
There are more unconstrained types in oracle.
Bartek -
What the data type of this variant? (in the following)
What's the datatype of the following variant (use probe and indicator):
value -> 1356.00
I want to tranfer it to numerical data. When I tranfer it using "variant to data" function (the datatype used is string or numerical), An error occured:
ERROR 91 occured at Variant to Data. The data type is not compatible with the data type wired to the type input."
Thank you very much!You can investigate any Variant by using the 'Variant Probe' for download from LAVA.
It will tell you what the actual contents of the Variant were.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
What should be the data type for a field in ztable?
i am desing a ztable , wht should be the datatype for a field if i want to enter values like -1.5 and -2.5 , negative values with decimals what should be the data type???
declare as P type. TYPE P DECIMALS 1
Type P data allows digits after the decimal point. The number of decimal places is generic, and is determined in the program. The value range of type P data depends on its size and the number of digits after the decimal point. The valid size can be any value from 1 to 16 bytes. Two decimal digits are packed into one byte, while the last byte contains one digit and the sign. Up to 14 digits are allowed after the decimal point. The initial value is zero. When working with type P data, it is a good idea to set the program attribute Fixed point arithmetic.Otherwise, type P numbers are treated as integers.
You can use type P data for such values as distances, weights, amounts of money, and so on.
Also check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2fd9358411d1829f0000e829fbfe/content.htm
Regards,
Maha -
What will be data type for the newly created Service Interface def.?
hi @,
I am using new Service interface for the start event with objective that any outside application will be able to trigger the BPM. I have created the same SI and its operation and Input params. Now when the request comes there is an exclusive choice gateway which based upon the input fields decide which path to take into consideration. Now I need to map the SI input to the Data object but which data type I need to use ideally it should be the data type defined in the Service Interface should be used but I am not able to locate the same in the data type folder .
How can I map the input service interface data type to the Data object so that it is available in the next BPM steps?
Thanks,Hi,
Typically the used types in a new service interface are anonymous. Try making the used complex type a global one (Right-Click onto it -> Refactor -> Make Anonymous Type Global).
Afterwards you could use the speed button around your your 'start event' and create a new 'data object' from there. Now the IDE automatically assigns the type of the service interface to your 'data object' and performs the standard mapping between the 'start event' and the 'data object' in addition.
Please also have a look at the documentation for further information:
Accelerated Modeling with Speed Buttons
http://help.sap.com/saphelp_nwce711/helpdata/en/16/52f063cac643d2917347aab86930ef/frameset.htm
There is also an interesting blog entry dealing with data objects and their reuse:
How to avoid modeling errors in Netweaver BPM? Part 3: Data flow in style
/people/soeren.balko/blog/2009/02/03/how-to-avoid-modeling-errors-in-netweaver-bpm-part-3-data-flow-in-style
Hope that helps,
Martin -
What will be the movement type when goods are returned from customers
what will be the movement type when goods are returned from customers
Hello Ravinder,
Please see the following description in the SAP Library
(http://help.sap.com) under the path:
Materials Management (MM)
-> Inventory Management (MM-IM)
-> Inventory Management and Physical Inventory (MM-IM)
-> Goods Receipt
-> Other Goods Receipts
-> Entering a Customer Return
" Entering a Customer Return
Since returns from the customer are usually examined, the quantity
returned is first posted to blocked stock returns. As is the case with
goods receipt blocked stock, blocked stock returns are neither valuated
nor do they count as unrestricted-use stock.
If an examination proves that the returned quantity should be taken over
into unrestricted-use stock, you enter the transfer to unrestricted-use
stock in a second step. It is at that time that the valuation of the
goods receipt occurs.
Depending on how Customizing for Sales is configured (the movement type
configured in the step Define Schedule Line Category), the delivery is
posted to the following stock:
- Blocked stock returns (non-valuated, not unrestricted-use) (movement
type 651)
- Unrestricted-use stock (movement type 653)
- Quality inspection stock (movement type 655)
- Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can
make a manual goods movement posting in the Inventory Management
component to transfer the quantity to valuated stock.
If blocked stock returns are to be transferred into your company's own
stock, you enter the transfer as a transfer posting. Choose movement
type 453 (to unrestricted-use stock), 457 (to stock in quality
inspection stock), or 459 (to blocked stock). "
Hope this helps!
Regards,
Shanthala Kudva. -
I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments -
I need help in "HOW TO EXTEND THE DATA TYPE SYSTEM"......
Hi All,
I need to add new data type like SDO_GEOMETRY in spatial Oracle.
I don't mean the User-Defined Datatype but new datatype embed in the database.
I read the Data Cartridge Developer's Guide but it has info how to use more efficiently UDT through indexes.
Anybody used the “Type System” under Databases and Extensibility Services?
It might be written in C++ or Java but I do not know how.
Any hints and help will be appreciated.
Thanks,> In Figure 1-1 Oracle Services, there is a "Type System" as Oracle Services.
The "Type System" is merely a compartmentalising the data type handling and implementation code/modules in Oracle.
This covers all types. Oracle native types, user defined types (UDTs), etc.
Saying that you want to create a new type in the "Type System" is basically saying you want to use the CREATE TYPE SQL command in Oracle.
> So, I want new_type1 and new_type2 behave like other built-in types, just the way
SDO_GEOMETRY works in Oracle Spatial Cartridge.
Not familiar with the SDO_GEOMETRY. Why do you mention this type specifically? What do you want to do similar?
> I have already done it with user-defined types. Now I need to do this way so that I can
compare and contrast in terms of speed, space...etc for part of my research.
Hmm.. I'm not sure what you are trying to compare ito of a UDT and Data Cartridge extensions. It is not one or the other. What research is this if I may ask?
Simplistically you extend the Type System with a new UDT/ADT. And there you have a new type data can be used in the SQL Engine and the PL/SQL engine. The OCI (Oracle Call Interface) supports such types via the OCI object API calls - which means this new type can also be used from Oracle clients written in Delphi, C++, Java, etc.
That new type can be a complex type. This type may need specific management code (memory management, context management, internationalisation, etc). To support this you can extend the UDT/ADT further by developing Cartridge Basic Service interfaces for the type - designing and writing management code to, for example, support specific internationalisation requirements when dealing with multibyte character sets.
You can also extend the UDT/ADT to be custom managed ito indexing, determining query optimisation, computing costs of custom methods/functions/operators on this custom data type. These extensions are done by developing Data Cartridge interfaces for the type.
Thus I cannot see what you are trying to compare. It is not one layer/interface versus another. These layers exist for all Oracle types (in the Type System). Oracle not only allows you to add to the top layer by adding/defining a new data type. It also allows you to customise (if needed) the layers below it. -
What are the output type and Tcodes?+
What are the output type and Tcodes?
hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva -
Determining the data type of the list item
Hi experts,
i have a dpop down list item in my form and from it i want
to select some of the columns of emp table like mobile_number or address
and send the selected field,along with name and empno to reports.
But when i am trying to determine the data type of the selected
item i am faceing some difficulties.
i am trying this
param := emp.:emp.LIST10%type;
can you please help me.
Regards
rajatparam := emp.:emp.LIST10%type;I'm not quit sure what you are trying to achieve with this.
If have build a poplist as a block-item you know the datatype of that item. When you know want to create a local variable to take the value from that list, either define it just with the datatype taken from the item, or take it dynamically from the column from the database the item is based on, so
DECLARE
-- explicit
vcParam VARCHAR2(50);
-- takeing datatype from db-column
vcParam TABLENAME.COLUMNNAME%TYPE;
BEGIN
-- Assignment
vcParam:=:EMP.LIST10;
END;
Maybe you are looking for
-
Ipod 4th Generation - Won't turn on or charge - Reset didn't work
No charging, no turning on, no recognition by my iTunes for my 4th Gen iPod Touch. It is only about 6 months old. I tried the holding home and sleep buttons for 10 or more seconds but that did not work. Any other option besides going to the Apple
-
Hello,good day problem with Cisco aironet 1040 series acces point
Hello good day to all, how to configure cisco aironet 1040 series using web configuration attaching through patch cord without using the console. if possible please send me step by step instruction, any help is gladly appreciated. thank you in advanc
-
Java.lang.NoSuchMethodError: getSocket using JavaMail inside JBoss
Hi, i built a library to easily send emails with JavaMail, via SMTP. When i use my lib in a stand-alone java application, it works fine, but when i need to use it inside my web application, deployed on JBoss AS, i get the following error: Servlet.ser
-
Hello, For a logging shortcut, I attempted to change the "label" yellow (as well as the other labels / colors) from cmd-opt 2, to just "2" with no modifier, but instead when I press 2, it just takes me to the first clip in the browser, rather than la
-
Newbie's question, I believe. I wanted to make a stored procedure to returns last several rows or last several hundred rows depending on the situation, so I started writing queries in order to copy/paste them into procedure. There are two queries, fi