What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?
What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?
https://discussions.apple.com/message/25419393#25419393
Peter
Similar Messages
-
My iMac has a 1T hard drive and it is full ! So i look for the archives and there are6000 mails recovered from gmail and i can not erase them. Is it a virus?
What can i do ?It sounds like a runaway process is filling up your volume.
Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Use a tool such as the one linked below to explore your volume and find out what's taking up the space:
OmniDiskSweeper - Products - The Omni Group -
is that correct? I spent an hour looking for it and thought maybe it was a glitch in the new app or ios.
However, I'm not sure what the itunes photos add, if one is using photostream.
The iTunes photos tab lets you download any photos that were on the iPhone before Photo Stream was introduced or do a total download of your iPhone's photos if you haven't done so previously. It's also for us "control freaks".
OT -
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/893967]]</blockquote>
The new firefox opens my homepage IN ADDITION to the firefox startup page EVERY TIME I open firefox. How can I stop this and make it so ONLY my homepage shows?See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved -
Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste
I looked at Bento and at first glance I think it would do everything I want it to do, then I saw a review or something from a customer that indicated the information in Bento could not be exported (say to send out a mailing). I may want a program that can do that as well, is there one out there? If not it does look like Bento will work. When you save a picture to a customer in Bento can you open it up full size?
-
My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanksSystem files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/ -
Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki
Hi Cereskit
Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
Vicki -
Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!
Issues are usually network related
What is your internet speed? www.speedtest.net
6mbps is required for instant HD (you can switch to SD in the settings)
If on wifi try ethernet and www.istumbler.net to rule out interference
Make sure you're using your ISP's DNS -
I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?
That's a very broad question and difficult to answer without knowing more about you requirements.
Try starting on this page Category review: library management software for the Mac |Part I and part II to get a starting point.
regards -
...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter -
Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
Thank you Callum GordonWell the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck -
I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?
Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry -
I've deleted all my emails and texts to make room for the 7.1 upgrade but my usage still says I'm using 641MB for mail and 364 MB for messages. Anyone know how to free up this memory? I have a 16 GB model. Thank you.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
Cheers, Tom -
How do I know what OS I have on my iMac? I've used it as a PC for years and need to switch over but I may be out of date with current software. I think I read Lion somewehere....? OS 10.5.8
Click on the Apple icon at the top left of your menu bar, then About this Mac.
OS 10.5.8 is Leopard. Lion is 10.7
As for upgrading:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank youRun the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium
Maybe you are looking for
-
Excise No. using Accounting Document Number and the P.O. number
Hi All ! In my GL report, I'm displaying the Accounting Document Number and the P.O. number. Now, the requirement is to display the excise no.. Tried different tables in SE11 using J_1EXC for excise detials, but to no avail. And last which vendor to
-
OBIEE 11g Hierarchy expanding issue
Hi Experts, I have an Analysis report which I display hierarchy and I have many reports which contain hierarchy. But I have a specific report which only expand up to 1 level only unlike my other Analysis reports which display the hierarchy up to the
-
Need help getting my LaserJet 3390 scanner to work with my (iMac) Apple OS X version 10.9.4
About two months ago i kept getting a message that my printer was not connected. When I got that fixed my scanner no longer worked and I haven't been able to find the settings to make it work. This is an excellent printer, in fine condition. Can some
-
Hello, I have a button which I have statically associated with a tool-tip text. I did this by setting the TooltipText to a text element. However, when I run my program, the tool-tip does not appear for the button. This button does not have any text i
-
Hi All, I am new to ITS. Please provide some good links, and material. Thanks, Mahantesh