What's up with the InDesign tab ruler staying on desktop when you go to another application...any on

When I am working in InDesign using the tab ruler, then go to another program, whether its an option-click to hide InDesign or clicking on another program's window, either way the tab ruler stays up while all of InDesign's and its pallets and art boards disappear. It's kind of annoying that it actually has to be clicked to close so it goes away.

I'm running Mountain Lion on an Intel Mac, version 8 of ID in CS6. But I've seen this problem since CS4 on on a PPC. It's like the tab ruler isn't connected or related to InDesign. While all of the other pallet windows become inactive and disappear, the tab ruler stays right there on the screen.

Similar Messages

I-Photo keeps coming up with the following error -Your photo library is either in use by another application or has become unreadable.

Your photo library is either in use by another application or has become unreadable. The solution suggested is restart and hold option/command down. I have done this and the options given make sense but when I try to run any of the suggested solutions the same error comes up as above
We have back ups to Time Machine but I am concerned that these backups may be corrupt as well so before trying I wish to try and repair
Has any one come into this issue before?
Running Mac OS X (10.7.5)
Thank you

Tell us more please - so it is hard to guess.
Sometimes really another program is using your library - then a simple "restart" of the system should fix this. If iPhoto is trying to open the wrong library, you may be seeing this error message. Then try to switch to the correct library by holding down the ⌥-key while launching iPhoto.
If really something is wrong, weneed to know more:
When did this start? Have you been importing new photos? Did iPhoto crash? Have you moved your iPhoto Library to an external drive? Where is your iPhoto library located? If on an external drive, how is the drive formatted?
Also, what is your version of the iPhoto application?
Have you updated any software recently or installed new software, before the problem first occured?
Have you run any maintainance programs, that help to clean your Mac, like MacKeeper?
Regards
Léonie

After I updated my 2 Iphones and one Itopuch the bluetooth on one of the phones and the Itouch will not stay on. When you go to the general settings to turn it on it shows on but the icon disapears when you go to home scree or leave general seetings.

After I updated my two Iphone 4's and my Itouch bluetooth problem occurred on two of the three devices. One of the phones and the itouch will not keep the bluetooth on. When you go to the general settings to turn it on it show on and the icon pops up but as soon as you leave the general settings the icon disappears and will not show up in the home screen. It will not pair with any devices. It will search for and find them but won't pair because the icon will not show up meaning it is off. What can i do to fix this problem that I believe was caused by the update.

Sounds like we have a similar problem. Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine. Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black. I pushed the home button and it worked, went into my texts and all were there. However ever since then the time isn't right, so it can't keep time no matter what I do. The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died. The battery life display at that moment wasn't correct either. Took to Verizon, they couldn't help. Suggested a factory reset, which I did last night and still the same issues! One day I couldn't even text my husband on his iPhone. Just wouldn't work at all. Did everything suggest and still not good. Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days. Very strange, and all on the 5C. What did you do? Is it working now?

TS1440 Clicking sounds. No entry on start up. Slow. Error code 36. Finally question mark folder. I don't understand what's wrong with the thing I barely use it. Can you help?

Iv been having multiple issues with my mac. This comes as a surprise as I rarely use it.
Symptoms-
Clicking noises
Slow
Unresponsive
(Error code 36)
Question mark folder
I used single user mode to try and repair the disk through utilities but the option wasn't available. I then verified the disk and it came up with few error messages
-invalid leaf record count
-invalid directory item
-found corrupt and needs to be repaired
Unfortunately I don't have an instillation disk, I didn't get one when I bought the computer. I don't know what else to do.

If the Mac is running v10.7 Lion or v10.8 Mountain Lion ..
Startup your Mac while holding down the Command + R keys so you can access the built in utilities in OS X Recovery
From there you can repair the startup disk.

I am using workgroup manager to restrict access in the finder to students, i have selected basic finder this seems to work when you try and launch finder, but when you are in another application eg safari and select open you can see shared devices

as well as shared devices you can see locations etc in the side bar. i know you can edit this in finder preferences or simply drag them off and they will be removed but i want to remove them as a student logs on. i know you can edit the finder plist file in workgroup manager but i do not know what keys i need to add to remove these options and the keys are not there as default can anyone please help any ideas on how to achieve this would be great

Please post in the Photoshop forum.
http://forums.adobe.com/community/photoshop
Bob

What's up with the website design and development software inDesign? All I see on the Adobe website is Muse.

What's up with the website design and development software inDesign? All I see on the Adobe website is Muse.@@

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?
Run TimeError Message Presented when InDesign CC 2014 runs:
Adobe InDesign cannot load the FastFractions.InDesignPlugin plug-in. The FastFractions.InDesignPlugin plug-in requires the 9.0 version of InDesign. Please contact the vendor to get a compatible version of FastFractions.InDesignPlugin.
Show this alert again?

As already told this means that the plugin has not been ported correctly. Some part of it for ex InDesign libraries or frameworks are being referenced from the CC sdk instead of the CC2014 sdk. To troubleshoot it i would advise you to rename the folder containing the CC sdk on your machine and then compile the project, it will fail to compile and you will get to know straightaway what aspects of the ported project are still accessing the old sdk. Fix the errors and your plugin will load fine.
Thanks,
Manan

What channels come with the DTA HD boxes

...and no one at COMCAST can tell you what channels come with the DTA HD boxes. All they do is send you a link to sign in...typical COMCAST

pablomunich wrote:
...and no one at COMCAST can tell you what channels come with the DTA HD boxes. All they do is send you a link to sign in...typical COMCAST
Apologies for any confusion we may have caused.
Currently, the DTAs (small boxes) are limited to viewing (up to and including) Digital Starter content.
Our DTAs don't yet support full strength encryption like full cable boxes do. Full-strength encryption is currently required for authorizing premium channels (like HBO) on a DTA.
DTAs that we have deployed support "privacy mode". This is a limited fixed passkey form of content protection.
We have no current plans to activate full-strength encryption, but if we were to do that in the future it would be done in a way that would be in compliance with FCC rules, including obtaining any necessary FCC waivers.
Some additional background at the link below (the article is from 2012 but still a good primer):
http://www.lightreading.com/spit-(service-provider-it)/security-platforms/comcasts-dtas-security-optional/d/d-id/660833
We can certainly arrange to swap your DTA for a full cable box. Please give us a call at 1-800-COMCAST or stop by one of the the local service centers below to swap your box.
73 Rock Ave
Plainfield, NJ 07063
MONDAY-SATURDAY: 9:30am-6:30pm SUNDAY: closed
800 Rahway Ave
Union, NJ 07083
MONDAY-SATURDAY: 9:30am-6:30pm SUNDAY: closed
381 Lord St
Avenel, NJ 07001
MONDAY-SATURDAY: 9:30am-6:30pm SUNDAY: closed
Additional information here: http://customer.comcast.com/help-and-support/cable-tv/digital-adapter-enhancement
Attached lineup for your area should also help, also sent this to you via e-mail. Digital Starter includes Limited Basic plus Expanded Service in your area

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

What is wrong with the table om page 2 (see attached file)

What is wrong with the table om page 2 (see attached file)

MySpecialSceenName wrote:
But there are several empty lines under the text...........
I'm guessing that by that you mean space for several lines, not empty paragraphs. This could be caused by any number of things, but not allowing hyphenation, or hyphantion rules that are too restictive might cause ID to be unable to break a line which would cause it to go into overset, as would possibly some combinations of Keep Options if there is more than one paragraph in the cell or if there is not enough room to fite the entire paragraph and you are just one line short with keep options requiring at least two lines be kept together at the end, for example. Applying No Break to a sting too wide for the cell would do it too.

What is wrong with the cloned HD?

Hi, there,
I have a G4 Sawtooth, 1.3 GHz, 1.6 GB RAM, with an ACARD ATA-100. An 80 GB HD is connected to the ATA bus of the motherboard, and an 160 GB HD to the ACARD. I cloned Mac OS 10.4.10 from the 80 GB HD to the 160 GB HD. I could boot the 160 GB cloned HD to the window when I was asked about the name and password. I used the name and password, which I have with my original HD. However, the window just shook my password off. I used the installation disc for resting password, and found there was no name or password for the cloned. Besides, the box for entering the name was obscured in gray that I could not enter a name there.
What is wrong with the clone? What should I do to make the clone HD completely bootable?
Thanks.
Robert

Inasmuch as you've provided little helpful information about how you prepped the drive and cloned it, all I can do is suggest the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

HT1665 What accessories come with the iPod 5?

What accossories come with the iPod 5?

mmhauss -
If you purchase it from Apple, the link below will tell you what comes with it.
http://store.apple.com/us/browse/home/shop_ipod/family/ipod_touch
If you purchase it from Walmart, the link below will tell you what comes with it.
http://www.walmart.com/ip/iPod-touch-32GB-5th-Generation-Assorted-Colors/2180546 2
If you purchase it from Target, the link below will tell you what comes with it.
http://www.target.com/p/apple-ipod-touch-32gb-mp3-player-5th-generation-blue-md7 17ll-a/-/A-14213718#prodSlot=medium_1_6
I could not get Best Buy's link to work, but Besy Buy sells them also. It is not hard to find it - go to Best Buy's website, on the side go to Audio and MP3, then go to Ipod and MP3 players, and search all of them, find it, and click on it, scroll down to the tabs with different information on them, click "specifications", and scroll to see what comes with it.
These are only a few of the stores you can get them from and the most popular stores I could think of.
Hope I helped!

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

I have no idea what to do with the payments for stuff I bought on iTunes.

Ok I had a card from a rebate atatched to the account and it has just expired. Now itunes wants me to pay from a different card for the things I bought in the week before it expired. I had the amount needed to pay for what i bought on the rebate card and bought my last thing before the card expired because i thought it would be stupid to let the money go without actually using it. I was looking today (it expired overnight) at itunes and now its saying i need to pay for them because the have not been pasyed for yet or something like that and i need to update the billing adress but i cant and dont want to one because i dont want to pay for something i had already had the money to pay for and they didnt charge me on it or something and 2 because i dont have another card to use bc i do not have a credit or checking or any card bc other than the rebate card i only have cash. sorry my question is so long but thank you for all the help you people can give me. ps i cant even get a card bc im 15

The rebate card that my mom let me use was after they had bought a new phone and try had let me have what was left on it 7.92 and it counted as a visa credit card so I could use it to activate my account the problem is that I bought the stuff before it expired and it is now expired and it's sayin I still need to pay for what I bought with the old card and I don't want to pay twice for the same things that's just stupid I'm goin to get a gift card for the lowest amount so I can still get the free stuff but I don't think I should be responsible to pay for something thy I bought with a card that had the money on it for them to charge bc they debt send out the bill to them when I got the stuff bc there is stuff on it for like Monday saying I need to pay for it when the card didn't even expire till Thursday night

Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

What's up with the InDesign tab ruler staying on desktop when you go to another application...any on

Similar Messages

Maybe you are looking for