What's your favorite way of doing usernames and passwords?

i'm embarking on the deveopment of a site that (hopefully)
will have a boatload of registered users. i understand that one way
of doing this is a combination of php and mysql - two things i know
little about. i searched hotscripts and there seems to be a number
of prepackaged programs that claim to simplify the process. what
would your suggestions be?
thanks.

I can only give you sketch descriptions of how to do it in
hopes that
"you'll get the idea".
1. To do an email confirmation, you enter the form data into
the database
along with a bit that says that this data has not been
validated, and then
send an email to the entered email address with a link to a
page that
toggles that "valid" bit in the record . When the valid bit
is toggled, you
know that the email went to the desired recipient.
2. manage the email address? I am not sure what you have in
mind here.
3. reclaim lost passwords? I recommend you not save
passwords. Instead,
have a link that send an email to the user, as in #1, but
with a link that
allows them to reset their password.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"joeq" <[email protected]> wrote in message
news:f68a9f$5pq$[email protected]..
> sorry - i meant 'how would i do it if i wanted to take
your original
> suggestion and do it all in dw - without wa?"

Similar Messages

  • What is your favorite way of running 32 bit apps in Arch64?

    I'm curious as to what methods Arch64 users use to run their 32 bit applications and what is your opinion on them.
    I myself relies mostly on lib32 packages to run a few applications that I need (mostly flash & wine), which works quite nicely expect it makes my system feel a bit 'messier'. chroot looks like a nice option but I've not tried it out yet (it looks complicated to setup to be honest).

    Agent69 wrote:
    azleifel wrote:I use a chroot to run Epson's 32bit-only binary driver for my 3170 Photo scanner plus XSane and VueScan - something of a waste of disk space but needs must etc. - and lib32 packages for everything else that's 32bit, including nspluginwrapper-flash, CrossOver Linux and Google Earth.
    It's good to know that someone has VueScan working on their x64 box. It is the one thing that keeps me dual booting with Vista.
    However, just like Zodmaner, chroot looks complicated.
    Setting up a chroot isn't that difficult, there are just has a lot of steps to follow!  VueScan works for me in a 32bit chroot with just one issue - for some reason it loses the ability to initialise my scanner and I have to run XSane first to do the initialisation before starting VueScan.  I had the same problem running VueScan in a 32bit chroot on 64bit Ubuntu, so it's not an Arch-specific problem, and Ed Hamrick wasn't able to help when I emailed him.

  • How to get weblogic logged in username and password in an MBEAN

    Hi,
    I have an MBEAN deployed under AdminServer. Want to establish a remote connection to credential Store MBean in base_domain using t3 protocol from this MBean, Which requires weblogic username password, port and host.
    What is the best way to get username and password,in an MBEans deployed in AdminServer at runtime.
    Thanks for your help in advance
    -Matz

    I don't think there is any way to get the password. What type of credential store is this and is it in the same domain?

  • What's your favorite of styling hyperlinks?

    Hi,
    what's your favorite way of styling hyperlinks?
    Right now I've colored mine C=100 M=100 Y=0 Y=0 and made them underlined. I feel the underlining is a bit too harsh on my overall design. Then again if I don't underline them, how are people suppose to know they're links?
    Spelling out URLs is just not an option. Unless I use TinyURL? They say their links will last forever but who knows for sure?

    That is a question about cultural expectations -- I can't answer that confidently.  The check mark that so often is used in US software to signal 'OK' (as in the spelling checking function where I edit this message) signals 'Error' to me -- and when it is shown in green (as Borland Software did at one point, and as Adobe does here) it signals both 'Error' and 'OK', and produces a kind of 'pulling-both-ways' effect that isn't too pleasant -- to me. I'm not sure I can come up with something that works for you.
    The dialog bubbles may work -- though to me the carry overtones of a footnote or an endnote. But they pretty clearly seem to signal 'more info elsewhere', and that's definitely a step in the right direction.
    I would be looking for something like a bent arrow -- perhaps Unicode U+21AA (↪), or perhaps something similar with a double arrow (Unicode U+21D2, ⇒), except I'd like it to have a similar curve at the left, half suggesting a 'click here to go elsewhere'. (Wingdings 3, character code 0xCA, is close.) But I could probably go for 0x58 in WIngdings 3, rotate it 90 degrees to the right, and perhaps tweak the small box into two smaller boxes of unequal size, suggesting movement.
    Or perhaps just something that suggest a 'click here' -- some of the simpler designs in Altemus Bursts, or Altemus Pinwheel or Altemus Stars might work.
    I would like something that tempted the reader into testing, and so encourage learning-by-doing. That would be helped by a similar symbol going the other way to indicate the 'back' of a web browser.  Arrows help here -- they show a direction. Other designs -- bursts -- won't be a easily understood: what would be a reverse burst?.And what symbol would be used at the target end of the dialog bubbles to suggest 'go back'? (Added: perhaps a quad or square signalling 'end'?)
    Arrows seem safer. Even guillemets might work, as long they won't be misread as quotes of some kind. Guillemets in a circle? There are some such glyphs like that in Wingdings. The standard 'fast forward' and 'fast backward'  glyphs (in Webdings, say) may also work.
    Actually ... this is the kind of problem I'd might want to suggest for a small project for a class for typeface designers.

  • Is firefox creating "Choose your favorite way to communicate" appearing in my Yhaoo mail display?

    Sometimes when I try to display the list of e-mails in my Yahoo mail I get the message noted with three word/symbol responses;
    Email, SMS or Instant Message instead of the email list. I can not get away from the message without leaving mail subsystem. Even if I select one of the responses offered, nothing happens. If I try to "save" the message, it shows it as a Firefox file? Yahoo doesn't seem to know anything about it but I did find a report of the same problem on Maxthon Forum with a snap of the screen image. I downloaded to jpeg and can forward it if you want to see a sample of the problem.

    I had this same problem and finally figured out that somehow one of my children had tampered with my Yahoo mail while I was away from the computer. It's been a few months, but I fixed it in just a few seconds by clicking and dragging the preview screen (the one that's telling you "choose your favorite way to communicate") down and/or out of the way. Once I used the bar/line to drag that screen out of the way my inbox and emails appeared again!
    To repeat, the problem had nothing to do with enabling or disabling the preview pane. It was simply that my inbox was being "covered up" by that other screen.

  • What is the username and password for login to apex? please help

    Dear Friends
    I'm new with oracle Apex.
    I read the installation guid i i succeed in installing it and configuring DAD's file also.
    Now i log on the url:
    http://laptop:8080/pls/apex
    the logon dialog appeared but i do not know the username and the password to log on
    will any one tell me what is the default username or password
    or how to get them?
    by the way : the release i installed is Release 3.1
    thanks in advance
    Message was edited by:
    [email protected]

    THANKS FOR YOUR REPLAY
    I belive i had not enter username or password during installation.
    Do you think i have to reinstall it again.
    Or is there any way to provide username and password after installation.
    By the way, I used the installation guid provided with Apex.

  • Default username and password not found

    Hello all,
    Just bought the new WVC54GCA ip camera, tried to configure it with its setup but can't get in as I couldn't find the admin password anywhere.....Does anybody know what are the default settings for these username and password fields?
    (Linux, MInt, Firefox...)
    regards

    Default Username is admin and default password is admin...However, if it does not work then you need to enter the password that was set when you installed the camera for the first time...If you don't remember the password then you need to reset the camera and re-configure it...

  • What's your Favorite Encoding Settings & Tags Question?

    Happy Holidays folks,
    I have some CD's to digitize. I am curious of the best way to do this ...
    Q: What is your Favorite Encoding Settings for CD's for your desktop? IOS device?
    ALSO...
    TAGS with various formats...
    Q: What encoding settings do YOU use for listening on mobile devices for CD digitization?
    For me I am thinking that I will create 256 Stereo AAC files for IOS, but also then create .aif files to store for desktop players etc.
    I didn't know that .aif's can store tag info....
    It seems that .aif files can store the TAG info that come in through iTunes - but where is the info stored:
    1 - right on the .aif file?
    2 - just in iTunes database?
    3 - just Spotlight?
    4 - or ?????
    If I copy the file to another hard drive on another computer - will it retain the tag info with aif?
    I seems that when I try that save tag info with .wav format - that it doesn't store it - is that true?
    I am curious to find out about tags with .aif - .wav etc.....
    Also does Apple Lossless play on PC / Lynux?

    revDAVE wrote:
    Happy Holidays folks,
    I have some CD's to digitize. I am curious of the best way to do this ...
    Q: What is your Favorite Encoding Settings for CD's for your desktop? IOS device?
    My favorite?  MP3 at 256.
    It seems that .aif files can store the TAG info that come in through iTunes - but where is the info stored:
    1 - right on the .aif file?
    2 - just in iTunes database?
    3 - just Spotlight?
    4 - or ?????
    Tag data is stored in the file.  This includes information like Title, Artist, Year, etc.
    Some of the data you see is library data, not tag data, and is stored in the iTunes library rather than in the individual song file.  This includes things like Date Added, Last Played, Play Count, etc.
    Also does Apple Lossless play on PC / Lynux?
    Apple Lossless can play on a PC running iTunes for Windows.  iTunes does not run on Linux, however.

  • What is the exact way of doing BDC ?????

    I know when the input is minimal we have to use CALL TRANSACTION method in BDC and when we have batch of input files we have to use BDC Recording.
    My question is what is the exact way of doing BDC.
    Could any one please tell me the exact way of doing BDC Recording Process.
    I appreciate your help.
    Thanks for your Time.
    Shiv.

    Hello Sivaramu,
    Call transcation can handle only one Trasaction(Tcode).
    Session method can handle multiple transcations.  
    Before getting started with the Recording process...we have to know the transcation code. We do recording to record the screen number, screen values,  Button values(OK codes) ...etc
    For example...while recording we create a record using some t-code (Say MM01) ...Now, we will create a materail master record using the Recording process.
    Let us see the process of recoding a single record with MM01 using SHDB(A tool used to record the details of T-code)
    Go through these steps for recording by using SHDB.
    How to use recording :
    Go to SHDB
    --> Click on New Recording
    --> Provide any name in Recording , For ex: Z_CHAITU
    --> Provide the Transaction name as “MM01”
    --> Select the update mode as Synchrounous or Asynchrounus method
    --> Click on Start Recording button.
    --> It will display MM01 screen….type the appropriate
    information in it.
    --> Type the Material no as : 4567E (Any no, But there should b 1 Character in it)
    --> Type Checmical Industry in INDUSTRY SECTOR
    --> Type COUPONS in MATERIAL TYPE
    --> Now click on Select Views button.
    --> Select BASIC DATA 1
    --> Click on Ok button
    --> Under Basic data tab under Material, it will display the Material number.
    --> Type the short description and “Provide EA as Base Unit Of Measure”
    --> CLICK ON BACK AND IT WILL ASK U TO SAVE THE DATA, CLICK ON YES
    --> Again click on Back, it will ask if u wish to save the changes to record entries.
    -> Click on Yes
    --> Now, u will be in Initial screen
    --> Select the record and Click on Program button
    --> Now, provide any program name
    --> Now, select ‘Transfer from recording’
    --> Click on Tick mark
    --> Give some short description
    --> Type as Executable
    --> Click on Source Code button
    --> Automatically the code will appear in SE 38 program.
    U can try these steps with any T-code by knowing the Mandatory fields in it.
    ---> *Now by following all the above steps ur done with the recording process to create a single record in MAterail master (MM01).  Now, we use the same recording process and put this recording under Loop in report program.*
    So that, it will follow the same steps automatically to create materail master records from the flat file. If you have 10 records in flat file(Note pad) then it will do the same process for 10 times to upload 10 records from the flat file using the recoding process that we have done by using the SHDB
    If you want then i will provide you with the sample program to upload the data for MK01 using Call transcation and Session method.
    Call transcation method for MK01:
    U can try these steps with any T-code by knowing the Mandatory fields in it.
    & TITLE  : BDC FOR MK01
    *& DESCR  : UPLOAD THE DATA THROUGH FLAT FILE
    *& TRANSPORT : DOLK901203
    *& VERSION : V1
    *& DATE  :  17th , JAN , 2008
    report Z24_BDC_MK01
           no standard page heading line-size 255.
    *& DECLARATIONS OF STRUCTURE FOR MK01
    TYPES : BEGIN OF TY_MK01 ,
             KTOKK TYPE RF02K-KTOKK ,
             NAME1 TYPE LFA1-NAME1 ,
             SORTL TYPE LFA1-SORTL ,
             PSTLZ TYPE LFA1-PSTLZ ,
             LAND1 TYPE LFA1-LAND1 ,
             END OF TY_MK01 .
    *& DECLARATION OF INTERNAL TABLE
    DATA : T_MK01 TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
           T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0 ,
           T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL INITIAL SIZE 0 ,
           T_ERROR TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
    *& DECLARATION OF WORK AREA
           W_MK01 TYPE TY_MK01 ,
           W_BDCDATA TYPE BDCDATA ,
           W_BDCMSGCOLL TYPE BDCMSGCOLL .
    *& DECLARATION OF SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME .
    PARAMETERS : P_FILE TYPE FILENAME .
    SELECTION-SCREEN END OF BLOCK B1 .
    *& DECLARATION OF START-OF-SELECTION
    START-OF-SELECTION .
    PERFORM SUB_UPLOAD_DATA .
    PERFORM SUB_POPULATE_BDC .
    PERFORM SUB_ERROR_REC .
    *include bdcrecx1.
    *&      Form  SUB_UPLOAD_DATA
          text
    form SUB_UPLOAD_DATA .
    DATA  : L_FILE TYPE STRING .
         L_FILE = P_FILE .
    CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
         filename                      = L_FILE
         HAS_FIELD_SEPARATOR           = 'X'
       tables
         data_tab                      = T_MK01 .
    endform.                    " SUB_UPLOAD_DATA
    *&      Form  SUB_POPULATE_BDC
          text
    form SUB_POPULATE_BDC .
    LOOP AT T_MK01 INTO W_MK01 .
    DATA : L_MSG TYPE STRING .
    REFRESH T_BDCDATA .
    perform bdc_dynpro      using 'SAPMF02K' '0107'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-KTOKK'
                                   W_MK01-KTOKK.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-NAME1'
                                   W_MK01-NAME1.
    perform bdc_field       using 'LFA1-SORTL'
                                   W_MK01-SORTL.
    perform bdc_field       using 'LFA1-PSTLZ'
                                   W_MK01-PSTLZ.
    perform bdc_field       using 'LFA1-LAND1'
                                   W_MK01-LAND1.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    CALL TRANSACTION 'MK01' USING T_BDCDATA MODE 'N' MESSAGES INTO T_BDCMSGCOLL .
    IF SY-SUBRC <> 0 .
    APPEND W_MK01 TO T_ERROR .
    ENDIF .
    CLEAR W_BDCMSGCOLL .
    READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1 .
    CLEAR L_MSG .
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = W_BDCMSGCOLL-MSGID
       LANG            = SY-LANGU
       NO              = W_BDCMSGCOLL-MSGNR
       V1              = W_BDCMSGCOLL-MSGV1
       V2              = W_BDCMSGCOLL-MSGV2
       V3              = W_BDCMSGCOLL-MSGV3
       V4              = W_BDCMSGCOLL-MSGV4
    IMPORTING
       MSG             = L_MSG
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2
    IF sy-subrc = 0.
    WRITE : / 'MESSAGE FOR ' , W_MK01-KTOKK ,'-------' , L_MSG .
    ENDIF.
    ENDLOOP .
    endform.                    " SUB_POPULATE_BDC
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR W_BDCDATA.
      W_BDCDATA-PROGRAM  = PROGRAM.
      W_BDCDATA-DYNPRO   = DYNPRO.
      W_BDCDATA-DYNBEGIN = 'X'.
      APPEND W_BDCDATA TO T_BDCDATA .
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
        CLEAR W_BDCDATA.
        W_BDCDATA-FNAM = FNAM.
        W_BDCDATA-FVAL = FVAL.
        APPEND W_BDCDATA TO T_BDCDATA .
    ENDFORM.
    *&      Form  SUB_ERROR_REC
          text
    -->  p1        text
    <--  p2        text
    form SUB_ERROR_REC .
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                        = 'C:/ERRORS OF MK01.TXT'
       WRITE_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                        = T_ERROR .
    endform.                    " SUB_ERROR_REC
    Session Method for MK01:
    *& PURPOSE : This BDC report is used to upload all the vendor master
    *&           data in to SAP using SESSION METHOD with handling the errors
    report Y035_SESSION_METHOD
           no standard page heading line-size 255.
    *& Structure declaration
    *Structure Declaration for source internal table
    TYPES : BEGIN OF TY_UPLOAD,
              LIFNR TYPE RF02K-LIFNR,
              EKORG TYPE RF02K-EKORG,
              KTOKK TYPE RF02K-KTOKK,
              NAME1 TYPE LFA1-NAME1,
              SORTL TYPE LFA1-SORTL,
              LAND1 TYPE LFA1-LAND1,
              SPRAS TYPE LFA1-SPRAS,
              WAERS TYPE LFM1-WAERS,
            END OF TY_UPLOAD.
    *& Internal Table declaration
    *Internal Table Declaration for source table
    DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
    *Internal Table Declaration for bdcdata
           T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0,
    *Internal table declaration for BDCMSGCOLL (To handle the errors)
           T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL,
    *Internal table declaration for reprocess the errors
           T_ERRORS TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
    *& Workarea declaration
    *Work area delaration for source table
           W_UPLOAD TYPE TY_UPLOAD,
    *Work area delaration for bdcdata
           W_BDCDATA TYPE BDCDATA,
    *Work area delaration for BDCMSGCOLL
           W_BDCMSG TYPE BDCMSGCOLL.
    *& Selection screen declaration
    *Selection Screen declaration
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
    PARAMETERS : P_FLNAME TYPE FILENAME.
    SELECTION-SCREEN END OF BLOCK B1.
    *& Start of selection declaration
    *Start of selection declaration
    START-OF-SELECTION.
    *Upload the data
    PERFORM SUB_UPLOAD_DATA.
    *Populate the BDC data
    PERFORM SUB_POPULATE_BDC.
    *Process the error records
    PERFORM SUB_ERROR_RECORD.
    *include bdcrecx1.
    *&      Form  SUB_UPLOAD_DATA
          This subroutine is used to upload the data
    FORM SUB_UPLOAD_DATA .
    DATA : L_FLNAME TYPE STRING.
    L_FLNAME = P_FLNAME.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = L_FLNAME
      FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      TABLES
        DATA_TAB                      = T_UPLOAD.
    ENDFORM.                    " SUB_UPLOAD_DATA
    *&      Form  SUB_POPULATE_BDC
          This subroutine is used to populate the BDC data
    FORM SUB_POPULATE_BDC .
    DATA : L_MSG TYPE STRING.
    *To oper a sesion in SE35
    CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
       CLIENT                    = SY-MANDT
       GROUP                     = 'MAMA_SESSION'
       USER                      = SY-UNAME
       KEEP                      = 'X'
       HOLDDATE                 = '20080129'
       PROG                      = SY-CPROG.
    LOOP AT T_UPLOAD INTO W_UPLOAD.
    REFRESH T_BDCDATA.
    perform bdc_dynpro      using 'SAPMF02K'         '0107'.
    perform bdc_field       using 'BDC_CURSOR'       'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_field       using 'RF02K-LIFNR'      W_UPLOAD-LIFNR.
    perform bdc_field       using 'RF02K-EKORG'      W_UPLOAD-EKORG.
    perform bdc_field       using 'RF02K-KTOKK'      W_UPLOAD-KTOKK.
    perform bdc_dynpro      using 'SAPMF02K'         '0110'.
    perform bdc_field       using 'BDC_CURSOR'       'LFA1-SPRAS'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_field       using 'LFA1-NAME1'       W_UPLOAD-NAME1.
    perform bdc_field       using 'LFA1-SORTL'       W_UPLOAD-SORTL.
    perform bdc_field       using 'LFA1-LAND1'       W_UPLOAD-LAND1.
    perform bdc_field       using 'LFA1-SPRAS'       W_UPLOAD-SPRAS.
    perform bdc_dynpro      using 'SAPMF02K'         '0120'.
    perform bdc_field       using 'BDC_CURSOR'       'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_dynpro      using 'SAPMF02K'         '0310'.
    perform bdc_field       using 'BDC_CURSOR'       'LFM1-WAERS'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_field       using 'LFM1-WAERS'       W_UPLOAD-WAERS.
    perform bdc_dynpro      using 'SAPMF02K'         '0320'.
    perform bdc_field       using 'BDC_CURSOR'       'RF02K-LIFNR'.
    perform bdc_field       using 'BDC_OKCODE'       '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1'         '0300'.
    perform bdc_field       using 'BDC_OKCODE'       '=YES'.
    *Transfer data to the session
    CALL FUNCTION 'BDC_INSERT'
    EXPORTING
       TCODE                  = 'MK01'
      TABLES
        dynprotab              = T_BDCDATA.
    ENDLOOP.
    *To close the session
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    ENDFORM.                    " SUB_POPULATE_BDC
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR W_BDCDATA.
      W_BDCDATA-PROGRAM  = PROGRAM.
      W_BDCDATA-DYNPRO   = DYNPRO.
      W_BDCDATA-DYNBEGIN = 'X'.
      APPEND W_BDCDATA TO T_BDCDATA.
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
        CLEAR W_BDCDATA.
        W_BDCDATA-FNAM = FNAM.
        W_BDCDATA-FVAL = FVAL.
        APPEND W_BDCDATA TO T_BDCDATA.
    ENDFORM.
    *&      Form  SUB_ERROR_RECORD
         This subroutine is used to process the error records
             in to a file T_ERRORS
    FORM SUB_ERROR_RECORD .
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME                        = 'C:\MAMA_ERRORS.TXT'
       WRITE_FIELD_SEPARATOR           = 'X'
      TABLES
        DATA_TAB                        = T_ERRORS.
    ENDFORM.                    " SUB_ERROR_RECORD
    Hope the Explonation and information I had provided will resolve your issue.
    Reward points if information is very Helpful.
    Have a great day!
    Regards,
    Krishna Chaitanya
    Edited by: Krishna Chaitanya on Apr 7, 2008 4:59 AM

  • What's your Favorite Movie?

    What's your favorite movie? I always enjoyed when Harrison Ford reminded us all to wear our seat belts when flying an unlicensed refridgerator through an atomic explosion. Great line huh? Something that came to mind during my viewing of Indiana Jones and the Kingdom of the Crystal Skull. I have silly quotes like this for most of my favorite movies I hope you enjoy them...
    The Anime Birdie

    Time for me to weigh in, and like GeraldRose, I have way too many to list, so I will explain why I like them so much!
    Superbad - I also find this to be one of the funniest movies I have ever encountered.  To top it off, I know a dude irl (well from online) who looks totally like McLovin.  Classic.  
    The Changeling  (1980) - Good, older creepy movie.  George C. Scott delivers a sharp performance as a man entangled in a mystery that truly affects his life.  One of the few movies as a kid that scared the dickens out of me, without showing anything really.
    Say Anything - I am a hard core John Cusack fan, and I loved him as Lloyd Dobler in this movie.  It also was my introduction to Lili Taylor, who I came to adore in later roles.  This might seem like a teenage love movie, but it is so much more.  I highly recommend!
    Dogfight - The late River Phoenix and Lili Taylor are a delight in this film.  Set in the 60's Phoenix plays a marine on weekend leave, who is on a mission to find the ugliest date for a contest with his fellow servicemen - a "Dogfight".  He stumbles upon Rose, (Taylor) who is not exactly how he first assesses her.  A bittersweet love story.  
    The Princess Bride - Robin Wright Penn, Mandy Patinkin, Carey Elwes, and Billy Crystal are just a few of the stars in this crowd pleaser.   It follows the story of Buttercup and her love for Westley.  This is not your traditional love story, but full of laughs and action!
    Empire Records - A genuinely guilty pleasure, full of great music and laughs.  Rory Cochranes turn as Lucas is brilliant.  Maxwell Caulfield of Grease 2 makes a delightful turn as a washed up songbird "Rex Manning". It's REX MANNING DAY!!!!  Also, one of my other faves Ethan Embry (then Ethan Randall) makes the role of Mark his own. First thing that I ever saw Seth Green in...he cracks me up. 
    All of the Austin Powers movies, All of the LOTR movies, Every Kevin Smith movie ever made, ESPECIALLY his newest Zach and Miri...well you know the rest. 
    I could go on and on. LOL!
    Dorothy
    Community Connector
    Lover of Movies
    Best Buy® Corporate
    Dorothy|Social Media Supervisor | Best Buy® Corporate
     Private Message

  • What's your favorite?

    What's your favorite Screen Capture program and why? I'm looking around and need some opinions.

    I use the Grab application in the Applications/Utilities folder.
    The keyboard commands in the Finder work as well:
    Shift-Command-3 - Save picture of screen as a file;
    Control-Shift-Command-3 - Copy picture of screen to the clipboard;
    Shift-Command-4 - Save picture of selected area as a file;
    Control-Shift-Command-4 - Copy picture of selected area to the clipboard;
    but I can never remember those keyboard shortcuts and have assigned a keyboard shortcut to call up the Grab application, that does all those and more (e.g., Capture Window; Capture Timed screen).

  • What is your favorite transaction and why?

    Just wondering what your secret tools are... Willing to share? Transactions you use all the time, and without them you would be, uh, toast...
    My favorite one is SE84 Repository Information System. I use it regularly to find objects in repository, like database tables, views, table fields, function groups, function modules, programs, logical databases, message classes, message number, SET/GET parameters, transactions, variants, screens, business add-ins, customer exits, change requests and authorizations.
    A useful hint: You can also search by application hierarcy. For example, in 4.6c to find customer exits within MM, do as follows:
    1. Start SE81
    2. Select subtree MM with F9
    3. Click Information system. SE84 is displayed.
    4. Click Envir. and then Exit techniques and then Customer exits. Click enhancements. A search screen is displayed and development class field is pre-filled.
    5. Press F8
    What is your favorite transaction and why?
    Regards,
    Jarmo Tuominen

    clearly SE80.
    Starting 4.7 you have a button on top of the tree navigation where you can click the information system.
    So you have (at least) three transactions in one: SE80, se84(85 and SE38.
    I wonder why still some people prefer SE38. It's just SE80 minus functionality and overview plus wasted screen space.
    Is there any existing function you can execute from SE38 that is not available in SE38? A lot the other way round.
    regards,
    Clemens

  • What's Your Favorite Game to Play?

    Hi,
    Just curious to see, for those Blackberry users among you who play games from time to time, what is your favorite game?  For me, it is Ka-Glom.  Another favorite of mine is Word Mole.  Just wanted to hear from some of you and get your thoughts.
    Doc
    Happy Birthday America...

    Doc I have had to delete all my games but Word Mole because of low memory. I guess that is my one biggest complaint on the Storm 1 is the low amount of Mb that comes on board. I assume there is no way to go into the MOBO of the phone and unsolder the memory chip and put a 500Mb chip instead?
    Happy Fourth to every one!!!

  • ***What is your favorite VI or other software to view large sets of waveform data?

    What is your favorite VI or other software to view large sets of
    waveform data?
    I have to look at waveforms with several sets of y data of 10000 or so
    points. Should I put this into Excel? There are no cursors, or zoom
    capabilities, and so on in Excel.
    Using a graph in LV is very slow when loaded down with this much data.
    Frankly a scope is easier for viewing waveforms. A scopelike utility
    for Windows?
    MathCAD?
    Is there any neat shareware out there?
    Thanks for your opinion,
    Mike

    There are a large number of analysis packages on the market that can display very large datasets. The one to choose depends largely on the nature of the data and what you want to do with it after you have loaded it in. Wandering down the software aisle at your local Staples you will find at least two or three.
    With datsets the size you are contemplating, a major feature to look for is a zoom function that initially shows the entire waveform but lets you narrow in on the data you want to see.
    DIGRESSION ALERT
    Actually, this sort of algorithm isn't to hard to code. I wrote a viewer once that allowed you to view datasets of arbitrarily large size (in V3 I think... though it may have been in V4). The code initally presented an overview of the entire dataset
    by decimating it down to a size that LV could display rapidly. As the user zoomed in using the cursors (not LV's graph zoom) the code would extract the selected portion of the data, redecimate it if necessary and redraw the display. (Which by the way is all the fancy packages really do anyway.)
    The tricky part is selecting a decimation function that retains the overall shape of the data.
    ENDOF DIGRESSION
    Several years ago I wrote an article for a magazine (Personal Engineering and Instrumentation News) that dealt with graphing packages that could handle a million datapoints at that time (late eighties) there were over a dozen programs--and they were all better than Excel...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • What is your favorite note taking app for handwriting to text?

    What is your favorite note taking app for handwriting to text?

    I use WritePad - feel it does a good job. However, I must admit that I didn't try any others... at the time, it had the best reviews of any handwriting recognition app (in fact, as I recall, it might have been the only one to do recognition).

Maybe you are looking for