What software can I update with on my powerpc g5. Running Mac osx 10.4.11, What software can I update with on my powerpc g5? Running Mac osx 10.4.11
What software can I update with on my powerpc g5. Running Mac osx 10.4.11, What software can I update with on my powerpc g5. Running Mac osx 10.4.11. Since it doesn't have Intel dual core processor, can't do Snow Leopard right? Is there anyway to upgrade the software?
Snow is Intel only. You could get Leopard 10.5 by purchasing a Retail (black) Disk off eBay or calling Apple Service and ordering one from them. That would allow you to run Safai 5 and iTunes 10, I believe, but would lose Classic support in the process.
Similar Messages
-
I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?
You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?
-
Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer. -
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
I have an iPhone 4S running software 5.1 (9B179) and cannot sync the photos in PhotoStream with iPhoto '11 v 9.2.1 (628). There's no option to update iPhoto and no option of PhotoStream (which is enabled on my phone). Can anyone help?
Thanks, Peter.
The "link related" and "text related" crashes were what I interpretted here, too, though I'm at a loss on how to proceed given that this is a fresh system and applications. This is happening with multiple InDesign projects in a design office environment where many others work on the same files and none of the other computers are having problems with these files. I've removed the same files listed (thank you for those) before and did so effectively with creating the new user account to test with, but it had no effect. I just tried again though, as these files could easily have becone corrupt again if they were being written to when InDesign crashed. Will let you know if that makes any difference. I've also gone through and completely cleaned out the fonts again and once more cleared the font caches. If need be I'll reboot this system into safe mode and try that way.
Best,
Mike -
i have purchased a iphone 4s second hand used and when i tried to update its software, it is asking for apple id . i dont have contact with the person to whom i have purchased this device now what should i do
You can't do anything. You have encountered the activation lock. Unless you have some sort of contact with the previous owner you have bought a very expensive paper weight.
You can find out more about activation lock from Apple's site here: Find My iPhone Activation Lock - Apple Support -
I can't update my apps because 'I have not owned the major version of this software' what is wrong?
Since a few days, I can't update my apps anymore via apps update. I am getting a message that says: you cannot update this software since you have not owned the major version of this software'. What is going on? BTW - I can update by going to the App Store, searching for the app, which is listed as ready for an update, and then clicking....
Thanks for any help,
CoosjeI did, thanks for suggesting.
1st attempt was a failure. All apps that didn't update on phone (ex. Acrobat Reader, Evernote, Google Drive etc) didn't update on my mac's itune store. same message and an additional one with try later error 100.
unrelated, (?!)
wrote to apple support indicating the problem (20-25 mins ago). no response yet, just confirmation email.
i changed my password (appleid), changed secondary email.
went ahead and logged-in again with new credentials across all devices, suprise - all apps downloaded fine.
glitch in the matrix?! -
Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.
They are absolutely now paired after doing all you said, as I reset both the Bose Link and the Iphone. Now we have a pair, but no sound on the speaker or the iphone when they are connected. I know they are connected b/c the iphone says they are in the blue tooth setting AND the Bose has a solid blue tooth light on.
Now what? This is beyond frustrating and only happened when I UPDATED ios!
Thank you! -
i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?
Cconnect it to your computer with the latest version of iTunes installed.
-
I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.
Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup -
I'm running Mac OS 10.5.8. I want to update to 10.7 or later so I can run iTunes 11 with my new iphone 5C. What update should I download?
If you do not know whether your iMac has a PowerPC or Intel processor, do "About this Mac" from your Apple menu. You will get this:
If the line by my second highlight arrow includes the word "PowerPC" as in the image, you can upgrade no higher. If it says, "intel," you can--as Niel indicates--update to at least 10.6.8 and possible higher. -
After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?
No internet access when connected to an available wi-fi network and the same when connected to your carrier's cellular network, or when connected to your carrier's cellular network only?
Any error message provided? -
Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?
Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?
Maybe you are looking for
-
Link Sales Order and PO and Pick & Pack
Ability to add a manual Link between a Sales Order and Purchase order to reserve the item(s). Also do not allow Pick & Pack manager to create pick list for sales orders with an earlier date if other sales orders exists waiting for complete shipment.
-
Java script problem when trying to sign in to Ovi ...
Hi Folks I am running XP SP3, with IE7. I have had problems due to installing ie8 then removing it and going back to IE7. I have had to reset all sorts of bits. Anyway. I still can't sign in to the music store, or register my PC for comes with mus
-
German Umlauts in helptext displayed as rectangle
Background Upgrading Apex from 3.2.x to 4.0.2.00.07 Problem Apex running in German. The tests look normal ( German Umlauts looks correct) Only customized helptext or standard help text will display the Umlauts as rectangles. Load_de.sql was running c
-
Hello, I have recently been programming a russian card game (Durak) as an Online-Multiplayer Game. Everything is working fine, except sometimes, it seems as though the information sent in some Data-Packtes is corrupt. I tried to replicate the errors
-
Hi i am using oracle 9i rel 2 on windows 2000 server Can you explain me the use of NOCOPY mode in stored procedures thanks in advance