What to do with ntp.conf and ntp.conf.pacnew

Hi.
I don't know if simply replace it with the pacnew.
My current ntp.conf
# With the default settings below, ntpd will only synchronize your clock.
# For details, see:
# - the ntp.conf man page
# - http://support.ntp.org/bin/view/Support/GettingStarted
# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
# Associate to public NTP pool servers; see http://www.pool.ntp.org/
server 0.pool.ntp.org iburst
server 1.pool.ntp.org iburst
server 2.pool.ntp.org iburst
# Only allow read-only access from localhost
restrict default noquery nopeer
restrict 127.0.0.1
restrict ::1
# Location of drift
driftfile /var/lib/ntp/ntp.drift
the ntp.conf.pacnew
# For additional information see:
# - the ntp.conf man page
# - http://support.ntp.org/bin/view/Support/GettingStarted
# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
# Associate to public NTP pool servers; see http://www.pool.ntp.org/
server 0.arch.pool.ntp.org
server 1.arch.pool.ntp.org
server 2.arch.pool.ntp.org
server 3.arch.pool.ntp.org
# By default, the server allows:
# - all queries from the local host
# - only time queries from remote hosts, protected by rate limiting and kod
restrict default kod limited nomodify nopeer noquery notrap
restrict 127.0.0.1
restrict ::1
# Location of drift file
driftfile /var/lib/ntp/ntp.drift
Thanks.

jasonwryan wrote:It depends which pool servers you'd like to sync to. I set mine to ones in my region.
thanks.
I did not remember what I did. If I replace it with the pacnew, will I get problems?

Similar Messages

Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

hi my
iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
thanks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

It was because the problem was major. If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel. The common way to solve that is to rebuild servers and put back into service. That takes time.
Apple did not want to admit this problem. My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed. To reveal this would be to cast into doubt their future revenue.
Either way. Run do not walk away from Icloud products and services. Apple has demonstrated they can not be a business partner.

After updating my screen blinks. What's up with that ? And how do I fix?

After updating my new operating system my screen blinks constantly. What's up with that? And how do I fix? Thx

Which OS? Provide details so people can help.

Red highlight next to code in dreamweaver. What is wrong with the code and is it affecting the websi

What is wrong with the code and is it affecting the website?

Line 107 looks dodgy to me and it won't have any effect on your code. However, it is a good idea to post a complete link to your CSS for us to see it in full and to validate it using external tools. In fact, you could validate the CSS (and HTML) yourself..
<http://jigsaw.w3.org/css-validator/>
Good luck.

What is wrong with icloud mail and how do I fix it?

What is wrong with icloud mail and how do I fix it?
I put the icloud mail login address in the browser, it brings up the login screen.
I put the login details in correctly, it says icloud has stopped responding, I always send to Apple.
It restarts and I get the right screen, below, but all of the icons are blurred out. If you hover over them they sometimes indicate what they are but won’t let me launch them.
I am using an Advent Laptop with a Celeron processor with Windows 7 and the browser is Internet Explorer 11 for Windows 7. (I know I am expecting a lot of it). All of my software is up to date.
Any ideas? I a not very techy but I'm not afraid to have a go...it communit question. Thanks fr your help.

Hello, Fightlikeaninja.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
Cheers,
Jason H.

Changes to trusted.conf and security.conf

To allow external connections to our Apache server I am told we must configure the trusted.conf and security.conf files.
Below are some examples in our trusted.conf file. We have an external user who wants to get acces but I am not sure what information I need to be gleaning from him: hostname? IP?. Below, in the examples, I see no ip addresses nor hostnames.
And I am also not sure about how to configure / enter information in the security.conf file.
Thanks.
<Location ~ "/(oa_servlets|servlets|servlet|jsp|configurator|mobile|forms|discoverer4i|emailcenter|soap/servlet|webservices|
dmsOACore|dmsDisco|dmsForms|pricing)/oracle.xml.xsql.XSQLServlet/xsql/lib/XSQLConfig.xml" >
Order deny,allow
Deny from all
Allow from localhost
Allow from %oacore_fwk_nodes%
</Location>
<Location ~ "/(oa_servlets|servlets|servlet|jsp|configurator|mobile|forms|discoverer4i|emailcenter|soap/servlet|webservices|
dmsOACore|dmsDisco|dmsForms|pricing)/IsItWorking">
Order deny,allow
Deny from all
Allow from localhost
Allow from %oacore_fwk_nodes%
</Location>

Hi Dan,
Is that it? Just list the IP address ? To allow a connection from 173.00.00.0 ip, all i need to include is this:
Deny from all
Allow from 173.00.00.0Correct.
Also, what of the security.conf?A fully functioning configuration of security.conf is attached in the following document.
Note: 287176.1 - DMZ Configuration with Oracle E-Business Suite 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=287176.1
Regards,
Hussein

What is it with Verizon lately and their lack of concern for customer satisfaction?

I am increasingly frustrated with Verizon and their lack of concern for customer satisfaction. I have been with them since they began and through the years they have become less and less customer friendly. All I want to do is do an early upgrade to the IPhone 6, I have one line that is out of contract, two that will be up in May and one in October. All the lines are eligible for early edge but only if we take a Motorola phone we do not want because they have some contact with them to push phones no one wants. Seriously Verizon what the heck is wrong with you, trying to force people who have been loyal to you to take a phone they don't want because they paid you to do so. I'm not trying to leave for the competition but at this point I may have to. I had even checked back in November when I saw we were eligible for the early edge and was told we could only do the Motorola phone but that promotion would be over Dec 31 and after that we could upgrade to any phone we wanted. Imagine my disappointment when we go to a verizon store to find out that was a lie and they entered into another lame contract with Motorola to push a diffent phone (last years model that didn't sell) and we would be forced to take one. I contact customer service and was told to bad, sorry we lied to you but it's either that phone or wait out your contract. Well maybe it's time to switch because it's very obvious that Verizon no longer cares about their customers, hey Verizon can you hear me now?

I'm not trying to get out of my contract, I have been with Verizon for 15+ years and have always been able to do an early upgrade, we just forgo the discount $50 or $100 we would get off the new phone. I have been told several times by Verizon employees that if I am within 6 months of my contract end I could do an early upgrade I just would not get the additional money off. I was also told in November that I could do the edge up for any phone after Dec 31st. I was lied to and that seems to be happening more and more. Verizon has been changing its practices to the detriment of its loyal customers. One of the reasons I liked Verizon and stayed with them for so long was because they were always willing to work with their customers and Verizon can change or alter their agreements anytime they want. I wish they would train their emploves not to be deceptive and tell people one thing and then do another. I can understand if I was trying to cancel my contract but I am not and would be extending my contract by two years as opposed to leaving in the next 6 months.

Path palette: What's wrong with "path share" and "path exclude"?

Hi everybody. First of all: Sorry for my english, but I hope someone can understanding me.
Well, I want to work with Fireworks in the future because I think that this programm keep in some situation more efficience as Photoshop... So I was trying to learn how this programm is working.
Since some days I make some experiments with Path's, because I like to work with Illustrator as well. But now, I am still going crazy because I don't understanding 2 options. I don't know the english names but In the path palette does they have this Icons:
The first option (Pfade teilen) is "path share" and the second one (Pfade ausschließen) is free translate "path exclude"
My question is: When I can use this 2 Options? I really did everything but nothing was working

Thanks for posting about this issue! I've taken a look at the "Combine Paths" operations in the Paths panel in both Fireworks CS6 and CS5 on my Mac, and noticed several bugs. Between you and I, here's a summary of what we've found:
Fireworks CS6, Version 12.0.0.236, WIN, 7, 64 Bit, SP 1
Exclude Paths - Does not work.
Fireworks CS6, Version 12.0.0.236, Mac OS 10.6.8 (Snow Leopard)
Divide Paths - No effect on rectangles.
Exclude Paths - Requires 2 clicks for rectangles - one to ungroup rectangles and another to apply path operation.
Fireworks CS5, Version 11.1.0.205, Mac OS 10.6.8 (Snow Leopard)
Divide Paths - Works like Exclude Paths.
Undo - Deletes previous unrelated non-path operation. For example:
Draw two ellipses.
Draw a rectangle.
Select two ellipses and apply Combine Paths operation.
Undo (Command-Z).
The rectangle disappears!
You can submit a bug report to Adobe about the "Exclude Paths" issue, and include the URL for this discussion within your report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
In the meantime, I'm going to send an e-mail to the developer about these issues. I know that he's working on a fix for another problem with this panel and planning on releasing a fix at some point, so hopefully these issues can get fixed as well.
Again, thanks for being so persistent. It is challenging to understand your writing at times; however, the animated GIF was very helpful—and very well done. Have you tried composing your posts in your native language and then using something like Google Translate to convert it to English? I don't know if the results would be better; it's just an idea.

E6-00: what's wrong with Belle refresh (and other ...

I've been following this forum and have always been up-to-date with E6-00 firmware. I've been almost happy with Belle and was expecting hardly the Belle refresh version for the Music player upgrade. What I got was - ? I don't know. Just the new version and no instant visible change. However... :
- the Music Player is the same. Meaning, no song search and still ridiculous user interface
- the phone tries to establish the data connection quite often even if no application is open
- the phone is hardly responsive from time to time (while looking for the network connection)
- the phone does not want to connect to the wifi. Restart helps.
- the phone loses the network operator and does not reconnect. Happened once (when roaming). Restart helps immediately.
- the Microsoft Apps: pursued upgrade. I personally do not need them. The screen is simply to small to use them effectively.
- (not a complaint) the battery life: I think the battery life is not really affected by the OS. Those complaining about shorter battery life should check how much time they spend using the phone, being connected to wifi, etc.
I'm very disappointed with the E6-00. I try to keep it positive but it keeps me down with every (new) issue. Does anyone has advice what to do with upper mentioned issues? I bought the phone ~2 months after it was available. I'm assuming that these first production series can have hardware issues? My phone was on reparation twice: for the notification light (hardware thing) and bluetooth issues (voice not heard over the bluetooth headset). The latter is still present I think...
I consider buying E71 since there's no other good (Nokia) phone on the market. What makes me sad the most is that my iPod touch does wifi connection and other things smoothlessly... But I don't want an iPhone (which is in principle the same as iPod touch), I just want a good Nokia.
Regards,
P

strelamcqueen:
I agree with your post except for the fact that Belle hosed my E6. Meaning: if you look at all my other posts, it's all about the GPS data functions that were awesome with the E71 then went away with the E6 on Anna. At least with Anna, there was an app called LeGPSData2 that restored most of the E71 GPS functionality. LeGPSData2 is not compatible with Belle. Sooo, I am currently using my E6 ONLY because of the decent camera.
Belle made the UI look pretty but that's it. I found the same problems with the responsiveness that you mentioned and issues with not connecting to my home wifi when I try to browse the net at home. There's nothing like downloading a bunch of big files only to discover that I've chewed up a bunch of data because the phone didn't connect to wifi. I put the wifi widget on one of my home screens and I make sure that I manually connect to wifi now before starting the browser. The Microsoft app via the upgrade were a joke. They actually took over Quick Office so that Excel and Word opened with MS Office Mobile. This would be fine but they open so tiny they are unreadable and they are not editable with MS Office Mobile for some reason. I removed the MS apps immediately.
My battery life suffered a lot after Belle refresh. With normal use as before the upgrade I would get home with about 50% battery with 3G ON. With Belle refresh, The battery won't make it through a full day with 3G on and I end up with about 25% battery at the end of the day with 3G off. Good thing I don't use much data through the day!
This is actually my second E6; long story but the first I upgraded to Belle and was disappointed with the loss of LeGPSData2 app. This one I was forced to upgrade to Belle refresh because while updating Ovi Maps one night, the update completely deleted the Ovi Maps app and I could not get it back without updating the OS to Belle refresh.
So I am with you. I too am very disappointed with the E6 but most of my disappointment comes from the software 'upgrades'. If Nokia would just leave well enough alone, all would be fine. I am sorry I have no advice to take care of the problems you and I are facing. I am in search of a new phone now and if I don't downgrade to an E72, I won't be getting a Nokia again. It's a sad story because I have been a die hard Nokia fan for a long time.
DS
@adrianhughes:
HUH? stelamcqueen is asking advice from other USERS. That's what the forum is about.

I have a mac pro and the light on my power cord is orange. what is wrong with my computer and how do i fix it?

The light on my power cord is orange. What is wrong with it and how can I fix my computer?

You have a Macbook Pro. A Mac Pro is a desktop. The light on your power cord is orange when it's charging. It turns green once it's fully charged.
Matt

/etc/launchd-user.conf and launchd.conf no longer work in Yosemite 10.10.2

As the subject says. According to this: https://support.apple.com/en-us/HT201684, they should. However according to the man page for launchd.conf. "launchd.conf is no longer respected by the system." Setting "umask 077" in /etc/launchd-user.conf should be forcing the default file creation permissions to 600, and folder creation to 700, but it is not doing anything.
I've tried this on a fresh install of 10.10.2. doing a "touch 1" creates a file named 1 with the perms -rw-r--r--. On a Mavericks install it creates a file named 1 with the perms -rw------- as expected.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

What is up with the Help and Support Section for Business Catalyst?

It has been very difficult for my customers and myself to access the help and support section of the site for Business Catalyst issues as we are constantly diverted to non-related Abode issues. The portal for support on Business Catalyst issue needs to be ISOLATED from ADOBE's main support section. It is bad enough that there are so many issues to deal with, but to add all the issues for all the applications is simply impossible to decipher and discover a solution.
Before the Adobe integration on the Cloud services it was much more simpler, wiith a much more efficient and cleaner layout, now every page looks like its generated by a bot that doesn't understand what I am looking for. Even the actual URL of the page is hidden so I can't even book mark it without opening the frame in a new window. My clients will not know how to do that.
Simplify plesase!
Teejay

Teejay,
Yes we are looking into this very thing and hope to improve this very soon. Not only making things a bit clearer but also a central location for all your BC support needs.
Kind regards,
-Sidney

What is wrong with logics timing and playback and midi

hi all,
i recently bought logic x and there seems to be a lot of problems im having. first off i noticed that when i am editing whilst looping what im working on it doesn't allways register my changes untill i stop and play again. this is especially true when making fades. it makes it very awkward to make changes in realtime and slows me down a lot. is this a new feature of logic lol or is this a problem with previous logics aswell. is anyone else having this problem and does anyone know if apple are working to fix this? its not my computer as its hi spec 12 core. running 10.8.5.
next problem im having is nothing short of insane. i have my mbase 11 being triggered by midi in logic and playing through an audio channel in logic from my apogee duet. this works fine but only when audio track is selected which is annoying. trouble im having though is when i select another track it seems the midi for the mbase is doing something to the selected track. either triggering extra notes or delaying and playing extra notes. im not sure but it is mental and it means i have to open up the fx i want to edit and then deselect the track. anyone have any ideas if this is something i can fix or if apple know ect?
thanks for reading, any help would be most appreciated
Rhys

Fades can't be edited in real time, Logic creates a fade file after you edited the region, then you press start and voila, it's always been like that.

Need to know what to do with new phone and no screen and no support from Telus Store

Purchased a brand new BB Curve 8530, and resigned another three year plan at Telus. Within 20 days, the screen went black and would not light up. I had used the phone in the morning to send a textmail, then set it on the charger. Later in the day, I picked up my phone off the counter, and the screen had gone black. I could not get it back.
I took the phone back to the Telus Store where I had purchased it, and the man who sold it to me, said it is under warranty, and he checked for moisture and any visible damages or scratches, and did not see anything wrong with it. He called to the main store to indicate that he was exchanging my phone straight accross, but the acting manager told him he could not do that. She said he must take the phone and 150.00 from me to send it in for repair and inspection.
I was told that if they decided I had done some damage, then the repair fee would be 500.00. (I am sure they would decide the latter, and I am not prepared to spend another 500.00 on a brand new phone!!!)
I called everyone I could at Telus to complain, but mostly talked to people in India and they said to contact Customer Care. This had been done, and no satisfaction received.
I tried to contact Blackberry, but no call number found, and only an online forum. No satisfaction there either.
I emailed CRTC, and have told everybody I know, about Telus, and we are all planning to get away from this company without care or concerns.
I want to get out of my three year plan with Telus, and I want my money back for this brand new blackberry phone that is sitting on my vanity. ....grrrr!
Most of my friends are moving to Bell, who incidently told me they would have done a straight out exchange for me...after I showed them the undamaged faulty Blackberry phone, and told them of my very bad experience with the Telus Store.
Any suggestions as to find any satisfaction in this scenario? I am currently using an old LG phone that was discarded by my daughter, and it is not a Blackberry, but it works, and the screen always lights up on it.

Unfortunately there is nothing that can be done here. But as a fellow Telus customer, this is bizarre behaviour, and unfortunately, you're not the first to come on here to complain about Telus' service recently. I wonder if there have been any major corporate shake ups recently.
As a heads up, when you call the Telus Mobility line, you actually should be getting someone in Canada. They may be in Quebec, or they may be of South Asian decent working in a Canadian call centre, but they are supposed to be in Canada (some call centre activities have been outsourced to the Phillipines for internet and phone troubleshooting though).
I would like you to go back to the original store and ask to speak to the manager and demand to know why you were charged for a warranty repair. There may be a legitimate reason, but I certainly don't know it and it's not normal practice for Telus and BlackBerry devices, unless they've come up with a new corporate policy. Personally, I'd love to know what that reason is. But it should be as simple as confirming the defect and issuing a replacement refurbished device if an easy repair is not possible. You might also want to check the terms and conditions of the sale.
When I purchased my device, I purchased an extended warranty which guarantees that if something goes wrong with it, I get a new refurbished phone with no problem, but I'll admit, I no longer know what the case is for devices without an extended warranty.
As a final bit of info, you can follow up with filing further complaints as indicated here: http://www.crtc.gc.ca/eng/info_sht/t1021.htm This link provides links to the other appropiate agencies to complain to, including Industry Canada's Office of Consumer Affairs and the Commisioner for Complaints for Telecommunications Services. Hopefully they can help further.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

What to do with ntp.conf and ntp.conf.pacnew

Similar Messages

Maybe you are looking for