What to enter in Group Authentication ?

Hi People,
I am connecting to the server however, i am entering the host as what i know. What do i need to enter in group authentication?? 

What vpn client are you  using? Is this the Cisco ipsec vpn client
Thanks
John

Similar Messages

  • Groups Authenticated users & Everyone difference

    Hi Everyone,
    There are builtin groups Authenticated users & Everyone.  when i check for some iviews, folders, their permissions are set to Everyone with enduser as checked and for some objects, the permissions are given as Authenticated users group with enduser as checked. 
    What is the difference between these two.  All the ESS/MSS objects has given the permission as Authenticated users group with Enduser checked. 
    anyone clarify this doubt.
    Regards,
    EP.

    Hi,
    There are two kinds of Properties for an Portal Content Object,
    1. Administrator Permission- create/modify/read/ permissions etc privilatges on the object. These are Design Time Permissions
    2. EndUser- When a user is assigned a end User Permission, he can view the content at runtime i.e. If the iView is assigned to the User (via iView assigned to a role, and role has an entry point and assigned to the user) and he has only the end user Permission, then he can login and view the runtime content only. A kind of end user privilage.
    Now,
    1. Authenticated Users: the Users who have entered their logon info/ used a certificate to Login to the Portal/ to say users who have authenticated themselves to Portal  are the Authenticated Users. The User Group is named so.
    2. Everyone- All the Users- Authenticated or not fall in this group. Sometimes Content can be accessed directly with a URL without any Logon.
    Based on who can access the End user Content, the End User permission is provided in Permission settings, i.e.in the ACL of that Object.
    Hope this answers your question. Reward points for Helpful answers.
    Thanks,
    Vamshi

  • Error while entering payscale group in IT8

    Error that data not there in T510 while entering payscale group in production system where as Payscale structure is maintained in T710 and working well in development and testing system for IT8

    Hi,
    You can try this link for a possible solution - http://sap.ittoolbox.com/groups/technical-functional/sap-hr/t510-vs-t710-1096277
    I have the same problem as in our design we configured the grades and levels in T710. But Infotype 8 is searching for T510 and right now we still don't know how we can have it redirected without using TARIF feature.
    It is working for a country that we did not implement and it did not use TARIF feature. What other ways could there be to use the pay grades and levels in T710 instead of having IT0008 look for values in T510? What configuration could be missing?
    Sorry to respond with another question but I think we're on the same track. Hopefully the link I provided can answer your problem.
    Regards,
    Avel

  • Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??

    Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??
    I can't ask for help on chat as I'm away from home and don't have the box with me, and obviously can't get the serial number in my phone as I've locked myself out!!
    Any help will be much appreciated!!

    https://support.apple.com/kb/ht1212

  • The web app input form is not holding what i enter in it

    Am setting up a business directory using the web apps, and two of fields are custom, one for map and video, {tag_map embed} {tag_video embed}. Now when I add a business using the web app input form. All the other fields work perfect in the list and detail page, but in the detail page where the map and video tags are, they are empty, the form isn’t taking what I enter in the map and video field. I tried text (string) and text (multiline), no change. But when I add the business in the back end, it works. So it makes me think there is something wrong with the input form. I also try with the edit layout form once the business was added, that didn’t work too.
      Any ideas what would be causing this to happen

    Delete them from your library including files, the go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

  • Sharing stopped.  Sharing set to allow editing and viewing.  He can see what I enter.  I can't see his entries.

    Sharing set to allow editing and viewing.  He can see what I enter.  I can't see his entries. He sees his entries plus mine.  I only see mine.  This all worked fine a week ago.

    I'm sorry to be so incredibly dense. The article to which you linked says:
    "If the computer is already authorized, the item plays. If the computer has not yet been authorized, iTunes asks you to enter the Apple ID and password you used to purchase the song."
    I can play songs from my husband's library. I can't drag them into my library.
    If deauthorizing/authorizing is the solution, who needs to do what? We've got three computers and two iTunes accounts.

  • What to Enter in Username,Password and Host String in SQL Plus 8.0??

    I downloaded Oracle Forms,Reports 6i.Along with it I got SQL Plus 8.0.Following
    are not working
    Username:scott
    Password:tiger
    Host String:Empty
    or
    Username :system
    Password:manager
    Host String:Empty
    I want to Know what to enter for Username,password and Host String.If i want to look in the TNSNAMES.ORS Plz Tell What to look for in it.

    Developer 6i is a client software, not database server. Ask the dba of the database, you are trying to connect, for valid userids/passwords/hoststrings.
    Werner

  • What is the Authorization group in Cash Journal View Maintenance (FBCJC0)

    Question 1: In Cash Journal View Maintenance (Tcode: FBCJC0), what is the Authorization group? 
    Question 2: How / Where can I define this Authorization group?
    As per the F1 Help  document in SAP :
    The authorization group enables you protect access to certain objects.
    In order to carry out a specific activity, the user must have authorization for the combination of the activity and the authorization group.

    Hi,
    Authorisation in Cash journal is meant for controlling of FBCJ transaction with an user ID. 
    For example, if you have a multiple cash book (Cash journal) or you are maintaining a cash book according to Business Area wise, Plant wise, etc.,
    In this case, you don't want to allow the other people to view / transact your cash book, then you can assign some unique identification in the authorisation group column against the each of your cash journal.
    These unique identification can be of any thing eg. 1001, 1002, 1ABC, ABC, etc.,  After this, the indentification has to be assigned in the respective user profiles in the below mentiond objects,
    F_BKPF_BED
    F_BKPF_BEK
    F_BKPF_BES
    F_BKPF_BLA
    F_FBCJ
    Hope it helps
    Saravanan.A

  • WHAT is "Hibernate this Group" and why can't I find ANY information on this and HOW to get accidentally hibernated groups BACK???

    This is REALLY getting me frustrated! What is "Hibernate this Group"? Why can't I find any information on it? Why can't I get groups back that have been accidentally "hibernated"? There is a "moon" symbol on my upper right screen that says "Hibernate this Group" and I don't know what it does or how it works! AND I accidentally "hibernated" a group when I clicked on it too long and a bunch of "zzz's" showed up and then it was GONE! How do I get it all back? And why isn't there a tech center I can contact to help with this???

    This sounds like some third-party app or extension, because this functionality is not in Firefox by default. [[Reset Firefox – easily fix most problems]] should remove it

  • What could mean "server group"

    What could mean server group. I have to specify when running a program in background(probably this is not a group in "smlg"as this partains to dialog processing

    I think you're refering to SAP RFC server group
    Similar to load distribution of user logins with logon groups, there is a mechanism for load distribution of RFCs
    This is needed to achieve parallelization to achieve higher performance
    To avoid overloading a dialog instance with too many simultaneous RFCs, it uses the resources of all existing dialog instances optimally. Hence you refine RFC server groups.
    Use RZ12 to maintain RFC groups.
    Create a group & assign single/multiple instances to this group
    Regards
    Puneeth

  • Enter Purch. group. . . .

    Hi All,
    While CIFing Purchase Orders from APO to R3, i am recieving error which says,
    "Enter Purch. group"
    As far i think, is this something to do with the SPRO settings at R3 side ??
    If so, please let me know the exact path of as to where this setting is to be mainatined . . .
    Awaiting for Suggestions.Please help.
    Regards,
    Prasad.

    Hi prasad,
    Purchasing group is defined in spro setting under the below menupath
    spro > SAP customising implementation guide > Materials management > Purchasing > Vendor master > create purchasing groups
    Please check and confirm
    Regards
    R. Senthil Mareeswaran.

  • What does enter password for what does cardDAV account "yahoo" mean on ipad 2

    what does enter password for cardDAV account "yahoo" mean on ipad 2

    I'm having exactly the same problem. I saw no further responses and am wondering if you resolved this. Just bought the newest iPad. I'm a comfortable user as I'm on my 3rd iPad. Never seen this asked of me. Incidentally I am also trying to resolve why I "can't connect to apple store". For that I have reset "network settings" & forgotten my wireless network. I'm starting to wonder if the CArdDAV and "can't connect to the apple store are related. I can reach the Internet via Mail & Safari. I have a weak g3 connection. Not able to download anything via that as it's slow right now. I am trying to restore my apps after a theft of my old one. I have quite a few apps I need to download and I can make none of them happen. And every time I reboot the "cardDAV password" request comes up, repeatedly.

  • What is the failure group in ASM  and the meaning of ASM assigns each disk

    Hi
    Please help me in understanding
    what is the failure group in ASM and the meaning of "ASM assigns each disk to it's own failure group, by default"

    As you may have known ASM uses mirroring and striping of files. Mirroring is storing same compies/parts of files in different disks/controllers. When creating disk group which could consist of several disks, you have to assign disks at least to separate failure groups for normal redundancy , or three failure groups for High redundancy. This means that ASM will never assign mirrode copies/pieces of files to the same failure group. So, assigning disks to different failure groups you make sure mirrored copies are not on the same physical storage. Saying with other words, failure group gives your more abstract meaning based on which you can organize your physical disks contained in disk group.
    That is why for normal redundancy at least two failure groups are needed, because there are one mirrored copy of each extent(allocation unit, to be exact) and for high redundancy the requirement is at least 3 failure groups, because each allocation unit has 2 mirrored copies, which should be on different failure group, consequently.
    Hope, this explanation is helpful.

  • What is Consumer resource group ,ORacle services?

    Hi,
    Could any one can explain what is Consumer resource group and Oracle Services.??
    Thanks,
    Nats

    Hi Mohamed,
    To answer your questions:
    Q: What is parent resouce ID?
    ANS: In your data, you may have some tasks that are associated with another task i.e. child tasks of a parent task. That association would need to be held in a column of your database table, for example PARENT_ID. The value held in the PARENT_ID column would be the ID of the parent task that the current task is associated with. For example, on this page - http://apex.oracle.com/pls/apex/f?p=36648:86 - you can see that the 2nd task, "Update Application Wizard", is a child of the parent node "Charts Integration", and that association is based upon the value stored in the PARENT_ID column of my sample table.
    Q: Is it also mandatory? Can I create a gantt chart without it?
    ANS: No, it is not mandatory. However, the syntax of the query must include PARENT_ID, which you can of course set to NULL, as you can see in the following example:
    SELECT NULL LINK,
           RESOURCE_ID ID,
           TASK_NAME NAME,
           NULL PARENT_ID,
           START_DATE ACTUAL_START,
           END_DATE ACTUAL_END
    FROM   TASKS Below is another sample query, where you can see the PARENT_ID is being set. In this case, we want to represent a hierarchical task list
    SELECT 'f?p=4000:2:'||:APP_SESSION||':::P2_ID:'||ID LINK
           RESOURCE_ID ID,
           RESOURCE_NAME NAME,
           PARENT_ID PARENT_ID,
           START_DATE ACTUAL_START,
           END_DATE ACTUAL_END
    FROM   TASKSI hope this helps to clarify things.
    Regards,
    Hilary

  • What is Buisness partner group hierarchy in sap crm

    Hi,
    what is Buisness partner group hierarchy,what is the importence of this in sap crm
    i wanted to know the detailed documentation for Buisness partner group hierarchy
    Thanks&Regards
    kishore kumar

    hi there
    what you are saying as Business Partner Group hierarchy is actually the account hierarchy inside the BP which can be created using the Bp groups
    here it is what it is and why its important
    Account Hierarchies
    Use
    The account hierarchy allows you to map complex organizational structures of a business partner (for example, buying group, co-operative or chain of retail outlets).
    When you create a hierarchy structure, you form groups of business partners (for example, for purchasing groups). You can use them for statistical purposes and for marketing analyses.
    You can use the hierarchy for pricing. Pricing is carried out using conditions such as pricing arrangements that are stored at a higher level of an organizational structure and can be transferred to the lower levels.
    Integration
    You can transfer a customer hierarchy from SAP ECC to the account hierarchy in SAP CRM.
    For more information, see Replicating ERP Customer Hierarchies to SAP CRM.
    You can also exchange the account hierarchy with CRM Mobile Client.
    Features
    With the help of business partner groups, you can create hierarchy nodes in order to construct a hierarchy structure. For this purpose, the type of hierarchy is first determined based on the hierarchy category.
    Hierarchy structures that are created in CRM Enterprise are sales area-independent.
    The condition maintenance for pricing is integrated in the account hierarchy maintenance function.
    also see this link
    http://help.sap.com/saphelp_crm60/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
    will clear all your doubts
    best regards
    ashish

Maybe you are looking for