What to keep in mind whilie developing under the new IOS PLA

Hi everyone.
I found out the the new IOS PLA was introduced on June 2nd. I could not spot any noticeable differences from the previous one.
The fellow developers at my office are quite acquaint with the previous PLA, however the release announcement sort of created confusion among them. They all wonder what to keep in mind while developing and publishing the apps under the new PLA.
Your help will be much appreciated!
Thanks in advance

Very simply "wired for internet" just means that you have, probably, Category 5 (CAT5) ethernet cables and jacks prewired in the home. These cables should all lead to one common location, hopefully in a patch panel or box. In order for this arrangement to be of any use you need a multi-port router and/or switch. I doubt whether the contractor provides this router/switch as part of the deal. Anyway the router/switch would connect all of these cables together as well as your internet service (DSL, Cable Modem, whatever). Plugging into any of the jacks in the home would connect you to the router/switch, which in turn would issue your device an IP address and connect you to the network. Internet access, as well as file sharing, would be controlled by the router/switch. Very basic home network and nothing complicated. Your Apple TV will work just fine with this network. You could also connect a network storage device, such as a large capacity hard drive that could be shared by all users on the network. Getting more complicated involves having a dedicated server machine running OS X Server for example.

Similar Messages

My phone keeps getting an error when downloading the new ios

Even when i connect to itunes i keep getting an error when downloading the new os. I have made 11 attempts.

download is corrupt. I finally solved it. I had changed my password on my appleid and had not updated it in my phone. After i got the same error on 3 different desktops i decided the error was in my phone and updated all my settings and the update worked the first time.
Thanks for your interest

Things to keep in mind while finalizing To Be Process

Hi Gurus,
Please tell me, what things i should keep in mind while finalizing to be process?
And what to do when client ask for something which i dont know that SAP is providing or not?
Waiting for reply.
Thank You
Regards,

hello please read below
points will be appreciated
Implementing a package can be a traumatic affair for both the customer and the vendor.   Get it wrong and the vendor may get paid late or have to resort to lawyers to get paid and tarnish their reputation.   For the company the new package may not work the way they expected, be late or cost a more than budgeted for and take management will take their eye off running their business.
Recently a client asked me what I would consider to be the five most important things one should consider before embarking on an implementation.   This isn't a simple question, although there are many factors to think about after some consideration for me the top five are way ahead of the others.
My top five factors to consider would be:
1. Set up a Project Board,
2. Secure the resources,
3. Complete the GAP Analysis,
4. Have detailed Cut Over Plans,
5. Train the users.
Taking each one in turn:
The Project Board
The correct set up and operation of the Project Board in my view is major factor in the success failure of the project.   The Project Board will consist of the stakeholders, key users and the vendor.   The Project Board is part of the governance of the project.   The Project Board will meet regularly to ensure that the project plans are created and being executed as planned, moves from stage to stage with all the deliverables being signed off is resourced properly.
The Resources
Three types of resources are absolutely necessary -- end users, change team and technicians.
Early involvement by the end users is absolutely necessary, as they will be the ones living with the system for hopefully many years to come.   They will want to feel involved in its implementation.   Buy in from the end users of the system is absolutely essential if the system is to have a long and stable life in any organisation.
The Change Team will identify the gaps between the package and the business requirements, re-engineer some of the businesses process to cope with the package, train the users to ensure implementation is smooth as possible into the business.
The Technical Team will prepare the systems environment for the package, apply any software fixes from the vendor, implement the software in the best way possible for the organisation set up and tune the software for the particular technical environment.
GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do.   For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Cut Over Plans
Detailed plans need to be developed for cutting over from the old system(s) to the new.   Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
Train Users
Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced.   Therefore the more effort you put into helping the users master the system early the better.
Difference between the User Exit & Gap analysis.
Both are quiet a different and has a small relation.
User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench.   its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
Gap analysis is start point of Realization and once blue print is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.   *-- V. Sridhar

Things to keep in mind while programming to avoid heap and permgen errors?

I some time get Java heap error and permgen error in my project which is having large code base i.e 2500 java lasses.
I know about two jvm parameter which we can set to deal with for java heap we can -Xms 1024 -Xmx 1024 and for permgen we can set -Xmx:permgen 256m.
That also sometime does not solve the problem. I am looking forward if we can do something proactively while programming the application so that we can descrease the probablity of facing such issues. here is my understanding
Permgen error can occur either at serverstart up or at application run time. I can think two main reason for this:
1) More the classes will be loaded more spaces will be eaten in permgen area.
2) Too many reference of static variable in application (as they gets also stored in permgen area). Agreed it wont make much difference. Probably millions of variable can make difference.
3)Too many string literals used in application.
So while programming we can take care of points 2 and 3 if we can avoid them. Looking for some other solutions also which we can keep in mind while programming to avoid these situations(For both permgen and java heap out of memory issue). Could not come up if we can follow any proactive approach for not facing java heap out of memory issue?

JavaFunda wrote:
As per understanding app server should unload the classes as soon as we stop the server.Well, if you stop the server then it'll definitely unload the classes. Or unloading might not be an accurate term.
Basically what we do is undeploy and deploy.That's not stopping the server. Unfortunately most of the app servers do require restarts, since they can't get rid of all the crud.
Is your program doing significant dynamic class loading?Not sure how can i get information about thisRead up a bit on dynamic class loading and see if it looks like something your program is doing a lot (probably not).

I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

That's not the correct port. It should be 993 for incoming.
If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created.

I have been using facetime on my iphone for a while and after the recent, ios update, I cannot seem to use the facetime. What went wrong?

I have been using facetime on my iphone5 for a while and after the recent IOS update, I cannot seems to use my facetime any longer. what went wrong?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

TS3221 I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the p

I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the problem?

Maybe:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Also see:
iOS: Troubleshooting backup issues in iTunes

HT204370 I just purchased the newest episode of a tv show and I selected the episode, but it downloaded an older episode under the new title. I don't want that one what should I do?

I just purchased the newest episode of a tv show and I selected the correct episode, but it downloaded an older episode under the new title. I don't want that one what should I do?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the mislabelled item. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white.

On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white. If others have experienced similar troubles, any feedback would be greatly appreciated.

Hi everyone, I'm the one from the example above posted by @frankensinatra and I can confirm having the same problem.
But I want to add something. The problem is not only related to black and white but to every picture, and it can be worse or not depending on the range of colors involved. Apparently, there is a shift between some RGB value that is going to remove some green producing a magenta look.
I've started contacting some developer about this problem and some of them is trying to understand what's going on.
In my case, the problem came up when I bought the new iPad mini Retina. I didn't have this problem with the previous iPad mini. Same OS for both devices.
The photo you see in the link above is a perfect example of what happens just going from one app to another and saving to the camera roll. In that case, the situation doesn't change if I send that picture from within the app by email, or to another app using the "open in..." feature. It keeps being purple. And the problem can be reproduced all the time.
Have some of you noticed the same?

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

HT1414 using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything was going routine until the phone had been going thought what I though

I attempted to update my iPhone 4 from ioS 5 to ioS 6 from iTunes on my laptop using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything seemed to be going routine until the phone had been going thought what I though was the update process, when an error window opened up and it said that an error had occured and the iPhone 4 could not be updated. I have never had a problem like this before and it caught me off guard and I did not note all the information in the error window, but it did not appear to indicate anything other than that I would have to abort the update and did not think it would be that big of a problem. I tried to disconnect the phone and was going to do the update at a different time when I could investigate what the problem was. However I could not get iTunes to recognize the iPhone 4 after this and still cannot. After rebooting the laptop a few times and also trying to reset the phone a few times as well, I just have a dead phone. The iPhone 4 just has the image of a USB cable with an arrow pointing to an icon for iTunes. I have tried to get iTunes to recognize the iPhone, but cannot get it to. I am unable to do anything else with the phone. It seems like the phone is in a state where it does not have enough software loaded to do anything or I don’t know how to get it to. Any suggestions how I can get my iPhone 4 back into service. Note: iTunes still recognizes my iPad and iPods, so iTunes seems to be okay to me. Craig

I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time

After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

The iPhone has a hardware problem - with the battery or something else.
The iPhone includes a one year warranty. If purchased new in October of 2012, it remains under warranty. Call AppleCare or make an appointment at an Apple Store if there is one nearby.

TS1702 After I have upgraded to the new iOS 6.1.2, the email software doesn't work and is not downloading. While before it was working fine.

After I have upgraded to the new iOS 6.1.2, the email software doesn't work and is not downloading. While before it was working fine.
How to fix this?

There seems to be massive amounts of problems with every aspect of iOS 6. From what I understand all you can do is try and reset your device and pray that Apple bequeaths working software next time or allows users to revert to iOS 5 while they search for someone who knows what they are doing. Perhaps you will need to use an alternate email app until then? (Although, Gmail seems to be the only one that works properly)

I updated the new IOS 4.3.3 on my IPad, since then i Am having trouble accesesing any App. What happens is i cant enter it or other wise it closes as soon as i enter it...i need help solving tris inconvenient.

I updated the new IOS 4.3.3 on my IPad, since then i Am having trouble accesesing any App. What happens is i cant enter it or other wise it closes as soon as i enter it...i need help solving tris inconvenient.

I have the same problem and I haven't solved it yet. On Friday I plugged in my iPad to my work computer after not having done so for quite a while. Today I went onto the work computer and discovered I had not updated iTunes before plugging in the iPad (and which I cannot do without an administrator password). I guess I will update iTunes and try again when I can get the guy to show up with the password. I hope that works. The reset idea does not work on mine.
Was your iiTunes updated before you tried? Have you found any solution yet? Mail and some internet apps still work but games, notes applications, spreadsheets etc. just begin to open and close immediately.
If anybody has answers I'd love to get some clues.

Hi I bought the oxford dictionary app a while ago and it worked fine . Now with the new iOS it starts and closes instantly. I don't want to buy it again. Who can I turn to?

Hi I bought the oxford dictionary app a while ago and it worked fine . Now with the new iOS it starts and closes instantly. I don't want to buy it again. Who can I turn to?

Try closing the app via the device's multitasking bar and see if it works when you re-open the app : double-click the home button to open the taskbar and then swipe or drag the app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
If the app still doesn't work then try deleting the app from your device and redownload it (assuming that it's still in the store) via the Purchased tab in the App Store app - or resync it from your computer's iTunes (if you don't have a copy of the app in the Apps part of your computer's iTunes library then copy it over via File > Devices > Transfer Purchases before deleting it).
If that also doesn't get it to work then contact the developer.

What to keep in mind whilie developing under the new IOS PLA

Similar Messages

Maybe you are looking for