What values of HTML script's type attribute are supported?

RE: <script type="...some type..." src=".... somewhere ...."></script>
(SCRIPT is uppercase in HTML 4, lowercase in XHTML)
Specifications say about type attribute:
"This attribute specifies the scripting language of the element’s contents and overrides the default scripting language".
JavaScript (aka ECMAScript) is supported and most widely used; in fact I run both inline and .js scripts.
Where can I find, without looking at Firefox source programs, what values are supported?
Just think of a script written in C language, or in Linux shell, or whatever else.
If i write <script type="abcd"> then this weird value is simply ignored.
Thanks, regards

Hi Massimo,
In addition to specifying ''text/javacript'', ''text/ecmascript'', ''application/javascript'' and ''application/ecmascript'', you can also specify a specific version of the javascript spec, ie ''application/javascript;version=1.8''.
There is no direct support for languages other than java/ecmascript, however it is possible to write javascript-based compilers for other languages like ''C''. This article has an example:
https://developer.mozilla.org/en-US/Add-ons/Code_snippets/Rosetta
It's probably worth stating that this work is highly experimental. If you're looking to write a web app that people will actually use, it's far, far better to use javascript in the browser and execute any other programming on the server side.
https://en.wikipedia.org/wiki/Server-side_scripting
There are also widely used tools like jquery which, while not allowing you to use a different language, do introduce new commands which make javascript easier to code and more powerful.
https://en.wikipedia.org/wiki/JQuery
I hope this is a helpful start.

Similar Messages

Mapping of source message to IDOC.. What values should be assigned?

Hi guys, again
I have SOAP->XI->IDoc scenario, but my IDocs arrive only with 1 segment... The IDoc is not standard, and has a lot of fields, but I want to fill only a few of them in some segments. Lets say, that I have 4 segments, with occurence 0..999999, each value has occurence 0..1 like following..
seg1-val1
    -val2
    -val3
seg2-val1
    -val2
    -val3
seg3-val1
    -val2
    -val3
seg4-val1
    -val2
    -val3
and I have source message like
<seg1>
<val1>..</val1
</seg1>
<seg1>
<val1>..</val1>
</seg1>
I think, I have to map seg1 tag to seg1 segment, and val1 tag to val1 field..
But! DO I HAVE TO MAP also seg1 tag to seg2, seg and seg4 segment? (to create logical "table"), or it is not necessary...
Next question: what value should be assignet to @SEGMENT attribute of segments? also (IDOC segment?) Should it be some constant?
Thank you guys!

All you need to map is <b>seg1</b> source to <b>seg1</b> target and <b>val1</b> source to <b>val1</b> target . But remember that, if your source has seg2,seg3,seg4 and you want to use them then map them accordingly otherwise no need to map.
@SEGMENT is counter for the number segments you are passing for each type of record. Use a java function to populate or just populate a constant 1.
regards
Shravan

Extension handler "type" attribute

Hey everyone,
I'm writing my first CF Builder extension, which is just some text processing that will happen in the editor on selected text. Easy enough so far.
I just wanted to verify what the docs say about the "type" attribute of the handler tag in the ide_config.xml file:
Type:
Specifies the handler type.
The handler type you can specify is "CFM"
What this means is that my extension menu item doesn't show up when right clicking in the editor in ANY files but CFM files. So if I want to process text in an HTML or PHP file, I'm pretty much out of luck. This seems so short-sighted and ridiculous. I hope I am wrong.
Thanks,
Andy

Sure, this extension is to basically add a few things I was used to in Homesite.
Here you go:
<application>
    <name>Text Processor</name>
    <author></author>
    <version>1.0</version>
    <email></email>
    <menucontributions>
        <contribution target="editor">
            <menu name="Text Processor">
                <action name="Convert to unordered list" handlerid="toUnorderedList">
                    <dialog
                    >
                    </dialog>
                </action>
                <action name="Convert to ordered list" handlerid="toOrderedList">
                    <dialog
                    >
                    </dialog>
                </action>
                <action name="Convert to uppercase" handlerid="toUpper">
                    <dialog
                    >
                    </dialog>
                </action>
                <action name="Convert to lowercase" handlerid="toLower">
                    <dialog
                    >
                    </dialog>
                </action>
                <action name="Strip HTML tags" handlerid="stripHTML">
                    <dialog
                    >
                    </dialog>
                </action>
                <action name="Format paragraphs" handlerid="formatParagraphs">
                    <dialog
                    >
                    </dialog>
                </action>
            </menu>
        </contribution>
    </menucontributions>
    <handlers>
        <handler id="toUnorderedList" type="cfm" filename="toUnorderedList.cfm" />
        <handler id="toOrderedList" type="cfm" filename="toOrderedList.cfm" />
        <handler id="toUpper" type="cfm" filename="toUpper.cfm" />
        <handler id="toLower" type="cfm" filename="toLower.cfm" />
        <handler id="stripHTML" type="cfm" filename="stripHTML.cfm" />
        <handler id="formatParagraphs" type="cfm" filename="formatParagraphs.cfm" />
    </handlers>
</application>

What are the different values available for type attribute

Hi,
    I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
     Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
Thanks in Advance,
Murthy.

Does this help
tring
    Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
VARCHAR: Varying-length character strings.
CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
DBCLOB: Varying-length strings of double-byte characters in a large object.
|BINARY: A sequence of bytes that is not associated with a |code page.
|VARBINARY: Varying-length binary strings.
BLOB: Varying-length binary strings in a large object.
|XML: Varying-length string that is an internal representation |of XML.
Numeric
    Data that contains digits. Numeric data types are listed below:
SMALLINT: for small integers.
|INTEGER: for large integers.
|BIGINT: for bigger values.
DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
|DECFLOAT: for decimal floating-point numbers.
REAL: for single-precision floating-point numbers.
DOUBLE: for double-precision floating-point numbers.
Datetime
    Data values that represent dates, times, or timestamps. Datetime data types are listed below:
DATE: Dates with a three-part value that represents a year, month, and day.
TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
Regards
Ravi

Creating iFS content type require more then 4 values to be set for 1st attribute

We get the following error:
exception in thread "main" oracle.ifs.common.IfsException: IFS-30002: Unable to
create new LibraryObject
java.sql.SQLException: ORA-01400: cannot insert NULL into
("IFSSYS"."ODM_ATTRIBUTE"."SETTABLE")
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java, Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.executeFetch(OCIDBAccess.java, Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.parseExecuteFetch(OCIDBAccess.java:1483)
at
We were happily creating, updating and deleting various iFS content types by
declaring 'n' attributes and then setting 3 or 4 of these properties of each
one of the 'n' attributes of every content type i.e.
//First attribute of the content Type
AttributeDefinition adef1 = new AttributeDefinition(ifsSession);
//First property of the first attribute of content Type
adef1.setAttributeByUpperCaseName(Attribute.NAME_ATTRIBUTE,
AttributeValue.newAttributeValue("FIRSTNAME"));
//Second property of the first attribute of content Type
adef1.setAttributeByUpperCaseName(Attribute.DESCRIPTION_ATTRIBUTE,
AttributeValue.newAttributeValue("The firstname of the
Employee"));
//Third property of the first attribute of content Type
adef1.setAttributeByUpperCaseName(Attribute.DATATYPE_ATTRIBUTE,
AttributeValue.newAttributeValue
(Attribute.ATTRIBUTEDATATYPE_STRING));
//Fourth property of the first attribute of content Type
adef1.setAttributeByUpperCaseName(Attribute.REQUIRED_ATTRIBUTE,
AttributeValue.newAttributeValue(true));
//Fifth property of the first attribute of content Type
//We are forced to set this up. Otherwise we get above error.
//However only required for first attribute of the content type.
//Rest of the attributes (n-1) are fine.
adef1.setAttributeByUpperCaseName(Attribute.SETTABLE_ATTRIBUTE,
String.valueOf(true));
//Sixth property of the first attribute of content Type
//We are forced to set this up. Otherwise we get above error.
//However only required for first attribute of the content type.
//Rest of the attributes (n-1) are fine.
adef1.setAttributeByUpperCaseName(Attribute.UPDATEABLE_ATTRIBUTE,
String.valueOf(true));
codef0.addAttributeDefinition(adef1);
The other attributes are fine. We only need to set 3-4 properties of these
attributes and could get away with it. Only the first attribute is causing the
above problem. For other attributes of the content type, we are still setting
only the first three/four properties
If you look at the definition of iFS internal table "odm_attribute", apart from field "id", which is an implicit column, there are 12 columns which are NOT NULL.
This means for every iFS attribute it must be required to set the values
of these 12 properties. However like most of the examples in iFS doco,
you could get away with setting 3-4 properties explicitly. I am sure some
of them are set implicitly by iFS.
The problem is, sometimes these implicit setting of properties by iFS is
not working and its complaining about them. The ones which are causing
problems are SETTABLE and UPDATEABLE.
We are forced to set them explicitly. Hence the inconsistency.
The problem is, what is the reason for iFS setting "SETTABLE" and
"UPDATEABLE" implicitly for some attributes and requiring us to set them
explicitly?
Thanks and Regards

hi srini,
i have includedthe char in rows. i want you to explain in detail how to use these values in the if then else statement in query.
i have created a calculated key figure 2= (formual variable =1 & keyfig a =0)* keyfig1kefig2 +not(formual variable =1 & keyfig a =0)keyfig2 *calculated keyfig1.
so this formula variable of replacement path have ref. to then char. and with what value should it replace, key, name, external char or attribut etc so that i should get the values of the char from 1 to20.
i donot to repalce with the attribute. i just want the char. values and not thier attributes (1. description 2. the second attribute has the values say abc1,efg2,ghi3 for respective charteristic values.
ie
char value               desc                 2nd attrib
1                            hi                     abc1
2                            bye                  defg2
3                            ciao                  ghi3

Element type attributes doesn't accept HTML escape codes in 10.1.4

In 9.0.4 we often used HTML escape codes in attribute values for element types when we needed to use special characters, for instance using « becomes « and so on.
In 10.1.4 however, this doesn't seem to work any longer. For instance « becomes
&laquo; which of course looks like garbage when you use the element type on a page. Anyone found a workaround to this ?

The workaround I've been using is running
ttyctl -f
as early as possible in my zshrc.
stty will be non-functional while ttyctl is freezing the terminal settings but in my case, since I'd never even heard of that command prior to my searches in finding a fix, I can't say it really bothers me. At least I can run yaourt now without having my terminal messed up. If you do use stty often, here's a function that'll unfreeze the terminal settings first.
Last edited by qwerty12 (2014-08-30 08:46:21)

How to get one column value from a DOCUMENT TYPE attribute

Hi,
I have created a DOCUMENT TYPE attribute which queries from a table and all the column values( For Ex: Customer Name, Contact Name and Address) are displayed in the message body.
I want one column value(For Ex: Customer Name) to be displayed in the SUBJECT of the message.
How can this be done? Please let me know.
Thanks in advance.

Thanks Matt. I have used SETITEMATTRTEXT to get a single column value into an ITEM ATTRIBUTE.
Please see the following procedure...
==========================================================
PROCEDURE MisNotifyDataDesk(
     itemtype IN VARCHAR2
     , itemkey IN VARCHAR2
     , actid IN NUMBER
     , funcmode IN VARCHAR2
     , resultout OUT VARCHAR2
     ) IS
p_Cart_Id               VARCHAR2(30);
p_ORG_NAME                     VARCHAR2(360);
BEGIN
     IF funcmode != WF_ENGINE.ENG_RUN THEN
          wf_log_pkg.string(5,'Notify_Cust_Data_Desk','Not in RUN mode');
     RETURN;
     END IF;
p_Cart_Id := WF_ENGINE.GetItemAttrText ( itemtype => itemtype
, itemkey => itemkey
, aname => 'CART_ID' );
p_code_position := 10;
     SELECT
          ORG_NAME
     INTO
          p_ORG_NAME
     FROM
          MISIBE_END_CUST_DETAILS
     WHERE
          QUOTE_HEADER_ID = p_Cart_Id;
-- For TEXT BODY
WF_ENGINE.SETITEMATTRTEXT(itemtype => itemtype , itemkey => itemkey , aname => 'ORG_NAME',avalue => p_ORG_NAME);
resultout := WF_ENGINE.ENG_COMPLETED||':'||CUST_DATA_CHECK(p_Cart_Id);
EXCEPTION
     WHEN OTHERS THEN
          WF_CORE.context (
          'WFCustCheck',
          'MisNotifyDataDesk',
          itemtype,
          itemkey,
          TO_CHAR(actid),
          funcmode,
          SQLERRM
RAISE_APPLICATION_ERROR (-20005, SQLERRM);
===========================================================
I am using &ORG_NAME in the body and subject of my message. But the value is
not retrieved into the ITEM ATTRIBUTE when I run my process. It is just displaying in the message and the subject of hte message as "&ORG_NAME"
CUST_DATA_CHECK used in the resultout, is a function which returns 'T' or 'F'. That part is working fine. Just retrieving the ORG_NAME in the ITEM ATTRIBUTE is not working.
Am I going wrong somewhere? Please let me know.
Thanks,

How to set default value to date type attribute.

Hi,
How to set default value to date type attribute.
E.g I want to set u201C01/01/1999u201D to date attributes.
First i want to set value and then i want to fetch the same & want to check equals.
please suggest solution.
Regards,
Smita

Hi,
In wdinit() method u can set the date
DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
Date today = Calendar.getInstance().getTime();
String reportDate = df.format(today);
wdContext.currentContextElement().setFromDate(reportDate);
Another way you have set the this formate like that
1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
2. Select the type as "date"
3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
4.Bind the context attribute to the type created now.
Hope this helps u.
Best Regards
Vijay K

Html. script.inf some firefox exe what is this and how to get rid off

when i click a genuine site, avast blocks this with html.script.inf.
when i browse the firefox history, the exact site is not known, but the message ends in firefox.exe, which is shown as script.inf. I am using the latest firefox with all necessary updates.
I have written to avast and to the site, excelforum and awaiting replies.
What that firefox exe means? what is that script. How to stop this.When i browse, firefox alerts, if i want to leave that page, and sometimes, a script is being written, do you want to continue or stop. Why this behaviour

nobody even see the post , i suppose, why c:program files\Mozilla firefox\firefox.exe is shown as html.script.inf file in the picture

Passing Values to Object Type Attributes

Hi Experts,
I need to pass values to object type attributes amount,channel and company code from zprogram.
I have got FM 'SWO_INVOKE'.But in this FM how will I pass values to 3 attributes.
I have created object type through SWO1 .Is it necessary to call FM SWO_CREATE before FM 'SWO_INVOKE'.
Please suggest.
Regards,
Kaustubh.

Hi,
I guess you will have to Initialize business object first by using the function module "SWO_CREATE' and then call the other function module to pass the attributes. I am not sure, but please check by passing the attribute name and value to the tables parameter 'CONTAINER'.
CONTAINER-ELEMENT = <Attribute name>.
CONTAINER-VALUE = <value from the Zprogram>.
Hope this will help.
Thanks,
Samson

In a XSD, can a element's name & type attributes have same value ?

Hi,
Can i have a same value for the name & type attributes of an Element. For ex: in below XSD, the element 'ChildEL' has the same value('ChildEL') for the type attributes as the name('ChildEL') ?
I am asking this because when i generate Java Classes using Castor Source Code generator using this XSD has input, the output classes do NOT compile since the class ChildEL inherits itself and which causes the cyclic inheritance. Please help.
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
     <xs:element name="ParentEL" type="ParentELType"/>
     <xs:complexType name="ParentELType">
          <xs:sequence>
               <xs:element name="ChildEL" type="ChildEL" maxOccurs="unbounded"/>
          </xs:sequence>
          <xs:attribute name="CreationDate" type="xs:dateTime"/>
     </xs:complexType>
     <xs:complexType name="ChildEL">
          <xs:sequence>
               <xs:element name="Type" type="xs:string/>
               <xs:element name="ID" type="xs:string/>
          </xs:sequence>
     </xs:complexType>
</xs:schema>
Thanks,
Manoj

I figured out that this is possible and to avoid the compilation error in Castor source code generator is to set the property org.exolab.castor.builder.javaclassmapping=type in castorbuilder.properties config file.

Perl script to delete attributes with space value

Hi,
We are using Iplanet Ldap Directory server on hp-UX 11i.
I have a problem here with the attribute values.There is a space (a blank space) for few attributes across the directory server.
They seem to be normal when lokked through the ldap console. But when retrieving data through ldapsearch utility they appear as Junk character.
The only solution for this may be find and delete those attributes and add new one's.
eg: telephoneNumber :: RASWD== ( when the attribute has one space value,nothing else)
My issue is iam not able to trace the attributes through perl ldap scripts.
If anyone can help me out with a script it would be great.There are few thousand employees data appear corrupted.
Thanks in advance.

This is how SunOne avoids storing lots of extra spaces (and thus using disk/memory) It base 64 encodes the entries. I believe you can use the -B flag to ldapsearch to display the entry as it really appears not encoded.
If you really wanted to ideantify them I would write a perl script to locate attribute:: in a db2ldif of the install.
That would at least tell you which ones have the issue with spaces

FIXED type Attribute value not equal to the default

Hi
I am in the processing of doing AP Inbound process. During My process I have created Invoice XML and XSD and mapped with XML Gateway OAG XSD.
BPEL able to pool the directory and process the XML file. But I am getting below error at XML Gateway error log.
FIXED type Attribute value not equal to the default
value ''.
Could any body let me know when do I get normally this kind of error.
Regards
Kiran Akkiraju

If you have imported the source code you could use a workaroud i have found. Create a new workspace and a new Project. In it create with the wizard a new Struts Controller Page Flow. After, create a action class, and some jsp pages.Then put some Struts components with the Components Palette.Be sure that in the newly created pages, jdeveloper has put the struts taglib. Now you can rebuild your project.
It seems that jdeveloper does some internal libraries configuration, but when you import the source code, it doesn't do it.
Hope it helps
Nicolas Fonnegra M.

Can't find id definition of type attribute using JDeveloper 11.1.2.1.0

Hello
I'm trying to deploy the WebClient from Part 6 of the tutorial "Developing an ADF Client Using a Web Service Data Control" [http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_52/jdtut_11r2_52_6.html] . For the tutorial I used the JDeveloper version 11.1.2.1.0. During the rendering of the view Dept_Emp.jsf I get the following exception.
oracle.jbo.NoDefException: JBO-25058: Definition id vom Typ Attribut wurde nicht in id gefunden.
If I do the same steps with the JDeveloper version 11.1.1.6.0 everything works fine. The view gets rendered and I can call the Web Service.
What is the problem when I use version 11.1.2.1.0 and how can I fix it? Here is the stack trace from the WLS.
Cheers Chris
StackTrace:
[Another instance of application WebService is running on the server. JDeveloper will redeploy the application.]
[Running application WebService on Server Instance IntegratedWebLogicServer...]
[02:21:10 PM] Web Module AnnotationWebApp.war recognized in project Annotation.jpr
[02:21:10 PM] Web Module WebClientWebApp.war recognized in project WebClient.jpr
[02:21:10 PM] ---- Deployment started. ----
[02:21:10 PM] Target platform is (Weblogic 10.3).
[02:21:10 PM] Retrieving existing application information
[02:21:10 PM] Running dependency analysis...
[02:21:10 PM] Deploying 3 profiles...
[02:21:10 PM] Wrote Web Application Module to C:\Users\userhome\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\WebService\WebClientWebApp.war
[02:21:10 PM] Wrote Web Application Module to C:\Users\userhome\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\WebService\AnnotationWebApp.war
[02:21:11 PM] Wrote Enterprise Application Module to C:\Users\userhome\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\WebService
[02:21:11 PM] Redeploying Application...
<ADFContext> <getCurrent> Es wird automatisch ein DefaultContext für getCurrent initialisiert.
Der aufrufende Benutzer muss sicherstellen, dass ein DefaultContext für diese Verwendung geeignet ist.
Es kann zu Speicherlecks und/oder unerwartetem Verhalten kommen, wenn die automatische Initialisierung nicht ordnungsgemäß ausgeführt wird.
Sie können diese Meldung vermeiden, indem Sie initADFContext ausführen, bevor Sie getCurrent() verwenden.
Um weitere Informationen zu erhalten, müssen Sie das Logging für oracle.adf.share.ADFContext auf die Stufe FINEST setzen.
[02:21:31 PM] Application Redeployed Successfully.
[02:21:31 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[02:21:31 PM] http://[2001:0:5ef5:73b8:24e6:3891:3f57:fed1]:7101/WebService-Annotation-context-root
[02:21:31 PM] http://[2001:0:5ef5:73b8:24e6:3891:3f57:fed1]:7101/WebService-WebClient-context-root
Run startup time: 21755 ms.
[Application WebService deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/WebService-WebClient-context-root/faces/Dept_Emp.jsf
[02:21:31 PM] Elapsed time for deployment: 22 seconds
[02:21:31 PM] ---- Deployment finished. ----
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad wird mit aktivierter Zeitstempelprüfung ausgeführt. Dies sollte in einer Production-Umgebung nicht verwendet werden. Siehe Eigenschaft org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION in WEB-INF/web.xml
<SOAPProvider> <setParameters> Value for parameter 'arg0' cannot be null
<SOAPProvider> <setParameters> Value for parameter 'arg0' cannot be null
<FaceletViewHandlingStrategy> <handleRenderException> Error Rendering View[Dept_Emp.jsf]
oracle.jbo.NoDefException: JBO-25058: Definition id vom Typ Attribut wurde nicht in id gefunden.
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:556)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHintObject(JUCtrlValueBinding.java:2209)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHint(JUCtrlValueBinding.java:2204)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getLabel(JUCtrlValueBinding.java:2044)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding$1JUAttributeDefHintsMap.internalGet(JUCtrlValueBinding.java:4130)
     at oracle.jbo.common.JboAbstractMap.get(JboAbstractMap.java:54)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:109)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
     at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.getLabel(LabelLayoutRenderer.java:929)
     at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:213)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelLabelAndMessageRenderer.encodeAll(PanelLabelAndMessageRenderer.java:96)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces-Gültigkeitsdauer empfängt nicht behandelte Exceptions in Phase RENDER_RESPONSE 6
oracle.jbo.NoDefException: JBO-25058: Definition id vom Typ Attribut wurde nicht in id gefunden.
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:556)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHintObject(JUCtrlValueBinding.java:2209)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHint(JUCtrlValueBinding.java:2204)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getLabel(JUCtrlValueBinding.java:2044)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding$1JUAttributeDefHintsMap.internalGet(JUCtrlValueBinding.java:4130)
     at oracle.jbo.common.JboAbstractMap.get(JboAbstractMap.java:54)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:109)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<08.04.2012 14:21 Uhr MESZ> <Error> <HTTP> <BEA-101020> <[ServletContext@23474460[app:WebService module:WebService-WebClient-context-root path:/WebService-WebClient-context-root spec-version:2.5]] Servlet failed with Exception
oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribut, 1=id, 2=id}
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:556)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHintObject(JUCtrlValueBinding.java:2209)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHint(JUCtrlValueBinding.java:2204)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getLabel(JUCtrlValueBinding.java:2044)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding$1JUAttributeDefHintsMap.internalGet(JUCtrlValueBinding.java:4130)
     Truncated. see log file for complete stacktrace
>
<08.04.2012 14:21 Uhr MESZ> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at 08.04.2012 14:21 Uhr MESZ. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = 08.04.2012 14:21 Uhr MESZ SERVER = DefaultServer MESSAGE = [ServletContext@23474460[app:WebService module:WebService-WebClient-context-root path:/WebService-WebClient-context-root spec-version:2.5]] Servlet failed with Exception
oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribut, 1=id, 2=id}
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:556)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHintObject(JUCtrlValueBinding.java:2209)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHint(JUCtrlValueBinding.java:2204)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getLabel(JUCtrlValueBinding.java:2044)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding$1JUAttributeDefHintsMap.internalGet(JUCtrlValueBinding.java:4130)
     at oracle.jbo.common.JboAbstractMap.get(JboAbstractMap.java:54)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:109)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
     at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.getLabel(LabelLayoutRenderer.java:929)
     at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:213)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelLabelAndMessageRenderer.encodeAll(PanelLabelAndMessageRenderer.java:96)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeFormItem(PanelFormLayoutRenderer.java:1088)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.access$100(PanelFormLayoutRenderer.java:50)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1604)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1523)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeChildren(PanelFormLayoutRenderer.java:420)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.encodeAll(PanelFormLayoutRenderer.java:208)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = IPT-E6500-07 TXID = CONTEXTID = fb9b00788889f749:6183364c:13691cdfd59:-8000-00000000000000e0 TIMESTAMP = 1333887699961
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<ADFConfigFactory> <findOrCreateADFConfig> Ressource META-INF/adf-config.xml nicht in Classpath gefunden
<ADFConfigFactory> <findOrCreateADFConfig> Eine Standardimplementierung von ADFConfig wird für die Anwendung erstellt. Dies kann in einigen Fällen zu unerwarteten Ergebnissen führen. Fügen Sie dem Classpath ein Basis-META-INF/adf-config.xml hinzu, um Funktionsfehler zu vermeiden.
<08.04.2012 14:21 Uhr MESZ> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\userhome\appdata\roaming\jdeveloper\system11.1.2.1.38.60.81\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_13 with a lockout minute period of 1.>

Hello Frank
I did all the steps in part 6 from the tutorial [http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_52/jdtut_11r2_52_6.html] . And the WebClient project looks like it should (see step 13 in Part 6 of the tutorial). If I do exactly the same steps with 11.1.1.6 version of JDeveloper I get more artifact generated under the folder Application Sources.
- webclient
DataBindings.cpx
DataControls.dcx
MyCompanyDC.xml (11.1.1.6)
- webclient.MyCompanyDC (11.1.1.6)
getDeptInfo.xml (11.1.1.6)
- webclient.MyCompanyDC.getDeptInfo (11.1.1.6)
-Return (11.1.1.6)
employees.xml (11.1.1.6)
Return_Operations.xml (11.1.1.6)
Return.xml (11.1.1.6)
- webclient.pageDefs
Dept_EmpPageDef.xml
In the DataControls.dcx there are warnings that the references defined in the Definition="webclient.MyCompanyDC"; and BeanClass="webclient.MyCompanyDC"; can't be found. I think this is the origin of the problem. What can I do to get these artifacts generated with 11.1.2.1.0? I also dried to copy them from the 11.1.1.6 project but that doesn't work. I got the same error.
Cheers Chris
DataControls.dcx:
<?xml version="1.0"; encoding="UTF-8" ?>
<DataControlConfigs xmlns="http://xmlns.oracle.com/adfm/configuration" version="11.1.2.60.81"; id="DataControls"
Package="webclient">
<AdapterDataControl id="MyCompanyDC" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl";
ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition"; SupportsTransactions="false"
SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="true" Definition="webclient.MyCompanyDC";
BeanClass="webclient.MyCompanyDC"; xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyCompanyDC" version="1.0";
provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider";
wsdl="http://localhost:7101/WebService-Annotation-context-root/MyCompanyPort?WSDL"
UsePersistedStructure="false">
<service name="MyCompanyWS" namespace="http://annotation/" connection="MyCompanyDC">
<port name="MyCompanyPort">
<operation name="getDeptInfo"/>
</port>
</service>
</definition>
</Source>
</AdapterDataControl>
</DataControlConfigs>
Edited by: cze on 08-Apr-2012 11:05

Values having html tags not getting populated while using AJAX in APEX

Hi,
I am using AJAX to populate certain values in a tabular report.
I have a java script of this form (I have taken this example from Denes's example http://apex.oracle.com/pls/otn/f?p=31517:241:1400877312570049)
<script language="JavaScript" type="text/javascript">
function f_set_multi_items_tabular(pValue, pRow){
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Set_Multi_Items_Tabular',0);
if(pValue){
get.add('TEMPORARY_APPLICATION_ITEM',pValue)
get.add('T_ROWNUM',pRow)
}else{
get.add('TEMPORARY_APPLICATION_ITEM','null')
gReturn = get.get('XML');
if(gReturn){
var l_Count = gReturn.getElementsByTagName("item").length;
for(var i = 0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("item");
var l_ID = l_Opt_Xml.getAttribute('id');
var l_El = html_GetElement(l_ID);
if(l_Opt_Xml.firstChild){
var l_Value = l_Opt_Xml.firstChild.nodeValue;
}else{
var l_Value = '';
if(l_El){
if(l_El.tagName == 'INPUT'){
l_El.value = l_Value;
}else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
l_El.parentNode.innerHTML = l_Value;
l_El.parentNode.id = l_ID;
}else{
l_El.innerHTML = l_Value;
get = null;
</script>
And I have the application process as follows
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="f05_000' || :T_ROWNUM || '">' || :TEMPORARY_APPLICATION_ITEM || '</item>');
HTP.prn ('</body>');
END;
If I have :TEMPORARY_APPLICATION_ITEM as 'Vikas' it gets displayed properly but if I have '<b>Vikas<b>' it shows null. if it has any HTML tags function l_Opt_Xml.firstChild.nodeValue is not working properly .Please tell me what modiifcation can I use in function l_Opt_Xml.firstChild.nodeValue to get Values with HTML tags also to get displayed.
Thanks,
Vikas

Vikas,
Try escaping special characters: htf.escape_sc(:TEMPORARY_APPLICATION_ITEM)Regards,
Dan

What values of HTML script's type attribute are supported?

Similar Messages

Maybe you are looking for