What VNC can be used to view the desktop of a SPARC Solaris 10 virtual machine

Visual Desktop is need to run some applications in our test and development suite.  Is there a way to enable/view the desktop from a virtual machine built on the sparc platform running Solaris 10 or higher?

I am using Oracle VM Manager to build virtualized operating systems.  The named domain types or virtualization mode is PVM. This is a new area for me so my apologies if I get the terminology wrong or don't answer your question properly. 
Hope this helps.
Thanks for your response
Brad

Similar Messages

  • What API can be used to obtain the AssemblyRef token for an Exported Type?

    Types that are decorated with the TypeForwardedTo attribute will have an Exported Type record in the metadata.  What API's should be used to access the exported type table / tokens?

    Hi Jeffrey,
    Thanks for your friendly response.
    >> there was a specific forum for questions like this but it looks like it's been archived??  Archived
    Forums A-B > Building
    Development and Diagnostic Tools for .Net.
    Based on the announcement in this forum here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=netfxtoolsdev
    This forum has been retired. It is still available for review in the Archived Forums folder. Any future posts on this topic should be put in the Common Language Runtime Internals and Architecture forum.
    So you could post this issue to the CLR forum here:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=clr
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What FM can I use to check the budget in shopping cart?

    Hi Gurus,
    I want to check budget in shopping cart in badi BBP_DOC_CHECK_BADI in SRM.
    Budget information is in ERP system (ECC 6.0).
    What function module can I use to check budget in shopping cart?
    How can I off standard budget check for specific cases?
    My system is:
    SRM 7.0 (SRM_SERVER 700 Level 8)
    ECC 6.0 (SAP_APPL   604 Level 6)

    Hi,
    Please look at FM B470_BUDGET_READ in SRM.
    Regards,
    Masa

  • What values can be used to set the SI_PROCESSINFO.SI_LOCALE?

    Post Author: Nadine
    CA Forum: Other
    In the following VBA program, the SI_Locale property gets set when a WEBI report gets scheduled as a PDF (Webi.ProcessingInfo.Properties.Add "SI_Locale", "fr"  ). What are the values that can be set for this property?
    Do they conform to an ISO standard?
    ' [VBA; BOE XI R2; COM SDK; SP2 FP24]        Dim Mein_Info_Store As CrystalInfoStoreLib.InfoStore    Set Mein_Info_Store = Info_Store        Dim Query As String    Query = "Select TOP 1 * " & _            "From CI_INFOOBJECTS " & _            "Where SI_NAME = 'International'"        Dim Liste As CrystalInfoStoreLib.InfoObjects    Set Liste = Mein_Info_Store.Query(Query)
        Dim Info As CrystalInfoStoreLib.InfoObject    Set Info = Liste.Item(1)        Dim Webi As CrystalWebiPluginLib.Webi    Set Webi = Info.PluginInterface("WebI")        Dim Plan As CrystalInfoStoreLib.SchedulingInfo    Set Plan = Webi.SchedulingInfo        Dim Verarbeitung As CrystalInfoStoreLib.ProcessingInfo    Set Verarbeitung = Webi.ProcessingInfo        Dim Eigenschaften As CrystalInfoStoreLib.Properties    Set Eigenschaften = Verarbeitung.Properties        Webi.WebiFormatOptions.Format = CrystalWebiPluginLib.CeWebiFormat.ceWebiFormatPDF    Plan.Type = CrystalInfoStoreLib.CeScheduleType.ceScheduleTypeOnce    Plan.BeginDate = Now    Plan.RightNow = True        On Error Resume Next        Eigenschaften.Delete "SI_LOCALE"    Eigenschaften.Add "SI_LOCALE", "es"    Webi.Title = "International_PDF_Spanisch"    Mein_Info_Store.Schedule Liste        Eigenschaften.Delete "SI_LOCALE"    Eigenschaften.Add "SI_LOCALE", "fr"    Webi.Title = "International_PDF_Französisch"    Mein_Info_Store.Schedule Liste        Eigenschaften.Delete "SI_LOCALE"    Eigenschaften.Add "SI_LOCALE", "en-GB"    Webi.Title = "International_PDF_Englisch"    Mein_Info_Store.Schedule Liste        Eigenschaften.Delete "SI_LOCALE"    Eigenschaften.Add "SI_LOCALE", "en-US"    Webi.Title = "International_PDF_Amerikanisch"    Mein_Info_Store.Schedule Liste

    Hi
    In addition to John's answer, inside Discoverer you can do this:
    Let's assume you have a Status item and it has the values you mention. If you create the following new calculation SUM(ROWNUM) and name it Status Count you only need to include the Status and the Status Count in the worksheet. You will now see a count for each status.
    Best wishes
    Michael

  • What program can I use to view and edit documents

    What program will edit and save me documents something like MS Office

    On what device?  (You profile says iPad.)
    If you're on a mac, there is Office, there is LibreOffice, there is NeoOffice, there is Pages. These you have to go get. Office and Pages cost money.  There is also TextEdit (included on the Mac).

  • What function can be used to count the number of cells who have a specific string (i.e. "Blue")?

    I am attempting to gather information as to the makeup of the cars in a parking lot. I have already gathered data as the make, model, and color of the care on each car. How would I go about counting the amount of cells which 'red' or 'honda'?

    Do you know that iWork Formulas and Functions User Guide is not delivered to help users to help you ?
    So, download it and search for the keystring COUNT
    I bet that you will find quickly the functions COUNTIF and COUNTIFS.
    Yvan KOENIG (VALLAURIS, France) mardi 13 septembre 2011 16:29:14
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    When we wish to know, we question. When we want to be capable, we study.

  • What function can be used to give a "count of occurrences of values" ?

    I would be very appreciative if someone in the user community could save me a few months of work....I've already been neck deep in my old statistics and calculus manuals. What function can be used to get the count of occurrences of the value of an item. Ex: Item is Status and possible values are "Published", "In Production", "Construction". In one report, I want to report all records of a table and list the Status (among other items) but at the total, I would like to see a count of each value for the item Status....something like Sum(Count(Status = "Published")) Sum(Count(Status = "In Production")) Sum(Count(Status = "Construction")). I know I could run the report 3 times counting a unique value, but I'm trying to be more efficient in my reporting. Thanks all for any help given.

    Hi
    In addition to John's answer, inside Discoverer you can do this:
    Let's assume you have a Status item and it has the values you mention. If you create the following new calculation SUM(ROWNUM) and name it Status Count you only need to include the Status and the Status Count in the worksheet. You will now see a count for each status.
    Best wishes
    Michael

  • I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program  can I used  to transfer one hard-drive  to another  hard- drive  on this mac pc.

    I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
    ,what program  can I used  to transfer one hard-drive  data to another  hard- drive  on this mac pc.

    The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
    (66989)

  • HT204382 what can I use to view flv files on my Mac with Lion?

    What can I use to view flv files on my mac running lion? I have tried several free ones like VLC & they play 4-5 seconds & quit?

    http://perian.org allows playback of Flash formats via QuickTime Player.

  • TS1702 I bought the megallan road gps I can't use it in the car on the road why what do I need to do

    I bought the Magellan road gps can't use while in the car what do I need to do while in car traveling

    Which model of the iPad do you have ? Only the 3G/4G models have a built-in GPS chip, if you have the wifi-only model then you will need an external GPS for it.

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

    http://www.fileinfo.com/extension/acc

  • How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

    How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

    99jon wrote:
    Perhaps it’s a design feature to speed up the Organizer launch.
    I am sure it is.
    - The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
    - The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
    - The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content,  totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
    So yes, the purpose is:
    - to speed up switching modes
    - to help folder organization fans to migrate to tags organization
    - to hopefully get rid of the old folder organization bugs

  • I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

    I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

    A calendar is not difficult nor does it take long once you know where the dates fall.
    Start with a basic month template table.
    1. Click on the table icon on the Toolbar to create a basic table for one month
    2. Click on the resultant table > Inspector > Table > Headers & Footers > 2nd button > 1
    3. Inspector > Table > Body Rows: 6 > Body Columns: 7
    4. Inspector > Metrics > Size > Width: 7 cm/in > Height: 7 cm/in
    You can drag resize the whole month to your liking afterwards
    5. Select the entire header row > Inspector > Table > Edit Rows & Columns > Merge Cells > Type in a month
    6. Type Mon in first cell & Tue in 2nd cell of of 2nd row > Select both cells and drag the white dot in the bottom right corner sideways to fill the cells with the days
    7. Do the same with the dates in the cells below
    8. You can fill the spare dates at the beginning and end of the month if you like and maybe change them to a paler grey.
    9. Style and position the text as you like it.
    10. If you don't want to see the grid or want different strokes, colors etc:
    Inspector > Table > Cell Borders/Cell Backgrounds etc
    When you have the first month looking the way you want, option drag out copies sideways to make the rest of the months.
    Peter

  • How Attributes declared in Component level can be used in All the views

    How Attributes declared in Component level can be used in All the views
    For Example :
    say :             context type ref to if_wd_context_node.
    is declared at component controller level and check box public is checked !!
    How can we use this any view in same WDP Component..
    For suppose : in this case
    We want to get the ref of child node using above declared attribute..
    How is it possible?
    Say in detail

    You can do this by doing the exact same like you did with the if_wd_context_node.
    1. Define attribute in Comp Controller and set it PUBLIC.
    2. Access the attribute over the reference of the comp controller, i.e. wd_this within the comp controller itself or wd_comp_controller within somewhere else in the component.
    So if you have, lets say, this defined as attribute in your comp controller:
    Z_MY_TABLE_REF  [X] TYPE REF TO [X] PUBLIC   CL_WD_TABLE.
    And then you want to catch the reference into a local variable within a method or the like within a view:
    DATA: lo_my_table_ref TYPE REF TO CL_WD_TABLE.
    lo_my_table_ref = wd_comp_controller->z_my_table_ref.
    Lekha has already said so as well, I don't really understand where the problem is
    Cheers, Lukas

  • What app should I use to view flash video on iPad?

    What app should I use to view flash video on iPad?

    You can also try Puffin or iSwifter. One of those might work for you, depending on the site(s) you need to view. All get mixed reviews, though.
    Regards.

Maybe you are looking for

  • Automatic sending of Alert through e-mail

    Hi All We have one alert which is generated with a query. Now afteer generating this alert we want to have system to send automatically this alert to some recepient via e-mail. Now will you please tell me the procedure to be follwed to integrate this

  • Why is the music so soft ? I have turn the volume to max

    Why is my earphone so soft although I have turn the music volume to maximum

  • PO through EDI.

    Hi, I want to understand the procedure of how can we transfer the details of a newly created PO to another vendor through EDI? Please provide me any useful material is possible. You can email me at [email protected] Thanks, Sandeep.

  • How to change the Horizontal Frequency?

    I can change the resolution, but not the frequency (Hz) why? Since I live in Sweden, a PAL land, I'd like to make sure my DVDs run at 75Hz. Running a DVD at the default frequence (which doesn't show, and I don't know how to find out) it looks like it

  • Volume changes on playback in iTunes - with Vista and a brand new computer

    When I playback any song, the volume slowly goes down. I have to manually turn up the volume, and then constantly adjust it up and down. How can I fix this? Thanks in advance.