What will be exact command instead of (archivelog from time 'SYSDATE-3';)

HI all;
rman configuration
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 14 DAYS and others is default
i am taking weekly archivelog backup by following script
run
backup as compressed backupset
device type disk
tag "weekly_archivelog"
format '/sw/weekly_archivelog_%d_t%t_c%c_s%s_p%p'
archivelog from time 'SYSDATE-7';
and
i am taking daily archivelog backup by following script
run
backup as compressed backupset
device type disk
tag "daily_archivelog"
format '/sw/daily11_archivelog_%d_t%t_c%c_s%s_p%p'
archivelog from time 'SYSDATE-3';
i want to ask about daily backup script.mainly (archivelog from time 'SYSDATE-3';),,,,,,,it is taking daily 3 days archivelog backup
what will be exact command instead of (archivelog from time 'SYSDATE-3';)

I assume you mean so that the daily doesn't constantly re-backup an archivelog that was already backed up?
If so, you could use the following:
run
backup as compressed backupset
device type disk
tag "daily_archivelog"
format '/sw/daily11_archivelog_%d_t%t_c%c_s%s_p%p'
archivelog all not backed up 1 times;
}or you could CONFIGURE BACKUP OPTIMIZATION ON or consider using DELETE INPUT to avoid the multiple backup of the same archivelogs.

Similar Messages

  • Why Backup database then backup archivelog from time...

    Dear Experts,
    I found in one of our rman scripts the 2 following statements:
    backup database;
    backup archivelog from time 'SYSDATE -8';
    It seems to me that a "backup database plus archivelog;" is more simple/accurate instead of these 2 lines as the retention windows is defined (5 days) for this DB so rman will manage the retention of datafiles and archived log, isn't it ?
    Why this separate statement for the archivelog ? I find it redondant but is it...
    Any advice is as usual greatly appreciated.
    Best Regards,
    Guillaume

    You are right. The use of backup database plus archivelog; is much better and you are sure that you backup all archived log you need.
    Probably that is an old script, previous version or the responsable of this script didn't know RMAN so good and the option you posted.
    Bye, Aron

  • If i restrict #Not included in Global Filters what will do exactly

    Hi
    If i restrict #Not included in Global Filters what will do exactly
    Regards
    ramu

    Hi ,
    In the Global filters if you are exulding #, then your every keyfigure will be restricted by that . That mean you will not see any record for the infoobject with # value in it .
    You can also imagine, that if you restrict all the keyfigures in the report by exculding #, it will be same as above .
    Hope the above reply was helpful.
    Thanks & Regards,
    Ashutosh Singh

  • What will happen if i don't restore from backup?

    what will happen to my itunes if i dont restore my ipod from my backup?

    Nothing happens to iTunes. However, if you don't restore the iPod Touch then your Touch will be restored to it's "as new" condition but with upgraded firmware (if that's what you are going to do.)

  • What will happen if I delete a photo from the library that is in a iPhoto Book?

    What will happen if I delete photos from my iPhoto library that are in an iPhoto book? Will the book stay intact?

    no - it will be deleted from the book too - books are like special albums that point to the library photos
    LN

  • HT201303 what will happen to my apple id after 5 time using it on iTunes on PC?

    I have installted windows and formatted the drive ( disk c ) 4 times and my apple ID in the PC when I authorized it said you authorize 5 out of 5 times. I never used  it on another computer but now what should i do? I did not know that I shoud deauthorize it befor formatting. so what will happen to my apple ID. please help me and give me more shots or find me a solution.thanks a lot.

    If you've reached five authorizations for that account, there will be a button in your iTunes Store account information that will allow you to deauthorize all systems associated with that account. Log into your Store account and you should see it. You can then reauthorize the computer(s) you're using now.
    For the future, it's best to deauthorize your system before reformatting the drive and reinstalling. That will help prevent a single computer from using up multiple authorizations.
    Regards.

  • What will change when I upgrade my Mac from Snow Leopard to Yosemite?

    I have a 2008 IMAC that I upgraded to Snow Leopard. What changes can I expect if I upgrade to Yosemite?
    My current browser is 5.1.10. I get messages that my browser is not current.

    OS X Yosemite has got big changes respecting to any older OS X version, starting from the interface (it includes a flatter interface, getting rid of 3D). Then, as you are upgrading from Snow Leopard, note that PowerPC-based applications are not compatible, so remove or upgrade them before upgrading to Yosemite. You can check whether your applications are compatible in this website -> http://www.roaringapps.com
    It is very important to make a backup of your files with Time Machine before upgrading. Some users have reported performance problems after upgrading, so a backup would allow you to go back to Snow Leopard in case you do not like Yosemite.
    Safari 8.0.2 is the most recent Safari version, included with OS X Yosemite, so you are using a very old Safari version. It will be updated automatically with the upgrade to Yosemite, so do not worry about that.

  • TS3376 what will happen if i lock my macbook from my iphone? will someone still be able to use it?

    On the find my iphone app there is a lock feature for my macbook.  If I put a code in and someone took my laptop will they still be able to access (use) my macbook ?

    Welcome to Apple Support Communities
    If you activate lock mode, your Mac will be locked the next time it connects to Internet and it has your Apple ID. After being locked, it won't be possible to use it anymore unless you have the passcode. The answer to the question is maybe, but normally, it should be locked the next time it gets connected to Internet if the thief doesn't change the Apple ID

  • What will keep my screen (not the cursor) from scrolling to the top?

    My laptop screen constantly scrolls to the top whether I'm in e-mail, the web, or any documents. I tried Internet Explorer with the same results. Does anyone have a suggestion?
    == This happened ==
    Every time Firefox opened

    You may have switched on caret browsing.
    *http://kb.mozillazine.org/accessibility.browsewithcaret
    You can toggle caret browsing on/off by pressing F7 (Mac: fn + F7).
    *Edit > Preferences > Advanced > General > Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    Note that this is an accessibility feature of Firefox.
    *http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Can you ask time machine to back up on command instead of waiting?

    Can you ask time machine to back up on command instead of waiting for time machine to back-up on next back-up time?

    ctrl (or right) click the TM icon in the Dock and say "Back up Now" is one way.
    ctrl (or right) click the Backup Disk icon in the Finder and say "Back up Now" is another
    This will give you an 'extra backup' as the regularly scheduled next backup will still take place.

  • Labview Program will hang between 33% and 50% of the time.

    I have a problem with a Labview program I made. I have two programs that do the same thing. One is in flat sequence form and the other is in state machine form.
    As explained in the link below, I would like to make use of a microcontroller to make wiring connections for automating a measurement process. A separate current source and volt meter will be used.
    https://forums.ni.com/t5/LabVIEW/Sequence-a-good-idea/td-p/2601333
    I have since made some simple test programs which I have attached. The problem is when executing, the labview program will hang, but not every time the program is execute.
    For example: Hall 1.2.vi will work properly twice with the third time it is executed it will hang. If you abort and try again, it will again run twice with no problems with the third hanging. This one is in flat sequence format (was in a flat sequence, but merged the windows because I thought that was the cause). From what I can tell, the program will hang when calling Keithley 6517 Single Read.vi. Both connected Keithley devices are connected to the computer via GPIB at 16 and 27. The way I verified if it was this vi causing it or contributing to it was that I removed it and the program never hung. I find it very strange that it will hang exactly on the third attempt every time.
    Hall 1.3 simple.vi will work the first time and hang the second time. So it works 50% of the time. This one is in State Machine format. This one will hang at the case titled "Measure 1" which contains the Keithley 6517 Single Read.vi.
    I've used the highlight execution button and watched the program run. Oddly, it doesn't hang when using this button. So I tried adding delays/wait in different places to no avail.
    What could be causing this? As a side note, I say the program hangs for two reason. The main one is the program doesn't finish running so the run arrow is still black. The second thing is that if you notice at the end of the labview program, I have a block there that turns the current source off which doesn't happen when it hangs. I have to manually turn it off and then hit the abort program button to stop labview.
    Solved!
    Go to Solution.
    Attachments:
    Hall 1.2.vi ‏42 KB
    Hall 1.3 simple.vi ‏81 KB

    altenbach wrote:
    SaintsFan wrote:
    Also, I've tried placing wait/delays at various places with no improvement of the problem. My next thought is to just remove all the vi calls and have everything in one program.
    How did you place the waits?
    Why would placing everything in one program fix the problem. That makes no sense! What is your reasoning?
    In the case of hall1.3, I placed a wait in the Measurement cases and CS On cases and there was no affect. In the hall 1.2 when the blocks were broken up similar to the state machine cases where each sequence window was identical to the cases, I placed a wait or delay in each window with no effect on the hanging.
    My reasoning for placing everything in one program is the same as my reasoning for figuring delays would help, since the time of execution would be altered. If the execution time is faster and if the timing is the problem then I figured that the problem would happen more frequently or even every time.
    Somehow I get the feeling this is not the case. The reason being the interval in which it succeeds or hangs is constant. I believe somewhere, a value is getting set. The 6517 Read vi runs fine if I run this vi by itself no matter how many or how fast I run it. Also, the same goes for both 1.2 and 1.3 if I remove the 6517 read vi they run fine no matter how fast or how many times I run them. 
    Somehow after the current source is set to operate and triggers labview will hang on a set interval when calling 6517 read vi.
    Separately they work, together there is a problem. I tried placing a delay between these two by connecting the error out of the trigger vi to the error in of the delay block and the error out of the delay block to the error in terminal of the 6517 config block. I've also tried delays between other blocks connected the same way. From what I understand, a called vi can't execute until all inputs are present. Is this the correct way to wire the delays?

  • What is restored from time machine?

    I've tried several ways to get a full bootable backup using SuperDuper, but it keeps failing as my hard drive is dying a slow death. The only BU I was able to obtain was a Time Machine backup. I have a Seagate 750GB Hybrid drive coming, and I'm wondering what will and what will not transfer onto my hard drive from the TM backup.
    I was planning on just swapping in the hard drive, booting holding command "R" then formatting the new drive and finally restoring using my TM backup. How close will the result be to my current file/application setup?
    Thanks in advance for any advice.

    If you do what you want to do, everything will be restored. If you reinstall OS X and then transfer your data, you will be able to select what you want to restore.
    Note that when you install the hard drive, it won't have anything, so in order to start up into Recovery, you need a Mid 2010 or later MacBook Pro. Hold Command, Option (Alt) and R keys while your Mac is starting
    If you have an older Mac, use Recovery Disk Assistant

  • Clearing out archivelogs from Flash_recovery_area after applied on Standby.

    I set up a standby database using data guard in 11g. I used the flash_recovery_area to store archivelogs, but really the true destination of all my archivelogs should and is my standby database. I didnn't have any other backup(s) setup yet. After few days, my database stopped because it ran out of space in flash_recovery_area. I had to add more space to db_recovery_dest_size just to get the database back up. Then I set the archivelog deletion policy in rman to delete archivelogs after applied on all standby.
    Is that all I need to do keep my flash_recovery_are clean enough to prevent from locking my database again, or is there something else I need to do? This is just a dev box, and I'm trying to stay away from setting up rman backup process with delete option.
    Thanks in advance,
    Kyle

    Kyle;
    Sorry because I'm not answering the question you asked. But I had the same problem with a similar setup.
    What I decided was to use RMAN to backup the primary and have the RMAN script remove archive after a week.
    On the standby I created an RMAN script to remove archive only.
    There's not much to it and at the end I add a seperate remove empty folder script.
    echo "Starting RMAN..."
    $ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalogdb> << EOF
    delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
    exit
    EOF
    echo `date`
    echo
    echo 'End of archive cleanup on STANDBY'
    mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
    . /u01/app/oracle/dba_tool/bin/rmemptyfolders.sh ${DBNAME}
    # End of Script

  • Script command to Save File From Portfolio

    This is the script command to save as, app.execMenuItem("SaveAs")
    What's the script command to Save File From Portfolio?
    Do you know?

    Hi,
    We were looking for that before: Exporting XFA PDF from within Portfolio
    Paul exposed the menu items and while I was hopefully that app.execMenuItem("ExtractFilesFromPackage"); would work - but it didn't.
    It transpires that only a few of the app.execMenuItem commands are unrestricted and available.
    So we continue to use the "open"button on the top right of the portfolio to open the file out of the portfolio:
    I think you are stuck with that,
    Niall

  • Rman delete archivelog until time 2hrs

    guys,
    I want to use this inside rman.
    rman{
    RUN{
    ALLOCATE CHANNEL ch01 TYPE DISK FORMAT 'blah lah';
    BACKUP
    ARCHIVELOG ALL
    DELETE archivelog until time "older than 2 hrs ago" backed up 1 times to device type sbt; ;
    RELEASE CHANNEL ch01;
    how do i translate this "older than 2 hrs ago" to RMAN language
    Edited by: user2579172 on Mar 29, 2010 1:19 PM

    this served my purpose :
    DELETE archivelog until time "sysdate-1/30" backed up 1 times to device type disk ;
    but
    rman is prompting whether to delete the archivelogs or not
    ex:
    List of Archived Log Copies
    Key Thrd Seq S Low Time Name
    4303374 1 11623
    Do you really want to delete the above objects (enter YES or NO)?
    Error occurred getting response - assuming NO response
    released channel: ch01
    RMAN>
    HOW i heck I tell RMAN inside the run {   to delete the archive logs without prompting me for YES OR NO                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for