What will happen to sap console screen if connection to SAP is broken

Hi All,
I have a doubt.
What will happen to sap RF console transactions run on Hand held guns. when the connection to SAP appliaction serevr is broken.
Does SAP has any recovery method. (I have seen recovery method for two step confirmations) is there some other means of checking the connection and recovery of data .
Will the RF queue management take care of it.
Thanks in Advance.
Regards,
Sathanbabu Mathan Kumar

hii
If the connection to the SAP Application Server will be broken while in-between atransaction the data will be lost
regards

Similar Messages

  • What will happen if I restore my iPhone if it hasnt let me back it up?

    I tried to back-up my iPhone 3gs but a message came up saying it needed to be updated first. I updated it and now there is a message on the phone screen saying that i need to connect to itunes, however when i try this, its telling me I need to restore my iPhone first. What will happen if I restore it with no way of knowing whether its backed up or not.
    Thank you
    Panicking!!!!!

    Download iTunes into your computer/laptop.  Upon iTunes completion, connect your iPhone 3Gs to your computer via USB port.  Wait for a minute or 2.  iTunes would automatically backup your iPhone without you doing anything. Make sure you're connected to WIFI.
    Good luck

  • What will happen when I install Leopard?

    So when leopard comes out in a few weeks and I install it, what will happen to all the files and apps on my computer. Will they be gone? Will I have to redo everything?
    This is my first transition on a new OS X. I switched right aftr Tiger came out. What is going to happen?

    Fair comment!
    If you want the full nine yards:
    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

  • What happens if I make a picture album on my ipad or iPhone and then sync with my Mac? Will it add a new album to iPhoto on my Mac? Also, what will happen if I add pictures on my ipad to existing albums that I made in iPhoto on my Mac?

    What happens if I make a picture album on my ipad or iPhone and then sync with my Mac? Will it add a new album to iPhoto on my Mac? Also, what will happen if I add pictures on my ipad to existing albums that I made in iPhoto on my Mac?

    ubercoder wrote:
    So what I have gleemed from this thread - is that Apple will not help me if an iPad mini is dropped and the screen breaks.  I would have lived without the insurance if I could have simply bought a new screen and then had it replaced by Apple.
    On something so fragile I would have expected a piece of glass to be a replacement part. But I am glad I made this post because now I no for sure if I break the screen there is no way to have it fixed by Apple and keep it in Warranty.
    Yup, kind of like anything else you accidentally break that is more cost effective to replace than to repair. Keep that iPad away from the toddler

  • How the data is stored in Info cube...in the back end what will happen???

    Hi Experts,
    How the data is stored in Info cube and DSO...in the back end what will happen???
    I mean  Cube contain Fact table and Dimension tables How the data will store and what will happen in the backend???
    Regards,
    Swetha.

    Hi,
    Please check :
    How is data stored in DSO and Infocube
    InfoCubes are made up of a number of InfoObjects. All InfoObjects (characteristics and key figures) are available independent of the InfoCube. Characteristics refer to master data with their attributes and text descriptions.
    An InfoCube consists of several InfoObjects and is structured according to the star schema. This means there is a (large) fact table that contains the key figures for the InfoCube, as well as several (smaller) dimension tables which surround it. The characteristics of the InfoCube are stored in these dimensions.
    An InfoCube fact table only contains key figures, in contrast to a DataStore object, whose data part can also contain characteristics. The characteristics of an InfoCube are stored in its dimensions.
    The dimensions and the fact table are linked to one another using abstract identification numbers (dimension IDs) which are contained in the key part of the particular database table. As a result, the key figures of the InfoCube relate to the characteristics of the dimension. The characteristics determine the granularity (the degree of detail) at which the key figures are stored in the InfoCube.
    Characteristics that logically belong together (for example, district and area belong to the regional dimension) are grouped together in a dimension. By adhering to this design criterion, dimensions are to a large extent independent of each other, and dimension tables remain small with regards to data volume. This is beneficial in terms of performance. This InfoCube structure is optimized for data analysis.
    The fact table and dimension tables are both relational database tables.
    Characteristics refer to the master data with their attributes and text descriptions. All InfoObjects (characteristics with their master data as well as key figures) are available for all InfoCubes, unlike dimensions, which represent the specific organizational form of characteristics in one InfoCube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/4c/89dc37c7f2d67ae10000009b38f889/frameset.htm
    Check the threads below:
    Re: about Star Schema
    Differences between Star Schema and extended Star Schem
    What is the difference between Fact tables F & E?
    Invalid characters erros
    -Vikram

  • What will happen if I quit the installer?

    What will happen if I quit the installer? It seems to be stuck a the last step "Time Remaining: About a minute"but the installer application is responsive. What are the consequences of quiting the installer?

    See if you can boot off another disk( Tiger, Panther,) go to Disk utility, and erase the drive.
    Eject the disk and boot up the Leopard disk and install.
    Boot by holding down the c key till the install screen appears.
    dj
    Message was edited by: dj640

  • Gateway restart : What will happen ??

    Hello,
    I just wanted to know what will happen if i restart the gateway for one of the application server.
    (I know, it can be done by SMGW and it starts automatically in few seconds. I am interested in knowing side-effects for this.. eg. running transaction will get disconnected and dumped or it will also reconnect ?.. something more.)
    My problem is.. on 1 app server, all workprocess goes in CPIC stopped state and status remain waiting for gateway.
    thanks
    ashish

    I have done it in the past, and it worked. But if you have heavy system load (especially RFC), then you have a good chance to kill something. You will also disconnect any server program registered to that gateway, so the connection will have to be reestablished. Under some circumstances it is possible that the gateway won't restart at all.
    It is always better to restart the whole SAP instance if anyhow possible. If you have never tried it, then always try on a test system first. Why do you want to restart your gateway at all? You should check dev_rd, dev_disp and dev_wX for error messages.
    Cheers Michael
    Edited by: mho on Jan 6, 2011 8:30 AM

  • HT201274 what will happen to my iPhone if i erase all content and settings?

    what will happen to my iPhone if i erase all content and settings? would it be considered as jail broken?

    if you selecet the erase all option all data from the device will get deleted and iot will tk u back to the configuration screen
    it is not considered a jailbreak

  • What will happen if oracle listener is stopped and started again.....

    Hi Gurus,
    Please suggest What will happen if oracle listener is stopped and started again on a running SAP System ?
    Thanks in advance.

    Hi Lakhbir,
    What will happen is that, all SAP work processes will loose connection to the database.
    If any active jobs(background jobs, updates, insert to database ) are running, they may fail. All the work processes will go to a re-connect state.
    ( There are few notes on WP reconnect which you can check and read about)
    DB Reconnect Parameters - SAP High Availability - SAP Library
    Application will be running but users will not be able to do any activity or may not be able to login at all and may get errors  like ( No connect to database possible)
    As soon as you start the listener process again , all the work processes will connect to the database again.
    This is because the WPs will keep on trying to connect to database at regular interval and as soon as the connection is available they will re-connect.
    You do not have to restart any work process manually in SM50 or anywhere else as this feature is enabled by default until disabled manually.
    Thanks
    Amit

  • If a new apple id sign in.what will happen to the old apple id if you erase or reset the phone?

    I buy a new iphone 5s and the store open it and put his apple id to download some stuff.. And after that i try to make my own apple id. What will happen if i erase all data and it is in need of apple id.. Will it be the old apple id or my apple id?? I heard that if i erase all data. The apple id of which i buy my iphone will appear and mine will not??

    If the store setup the phone with an Apple ID/Password, that is not yours, & turned on Find My Phone, then you will need that Apple ID/Password to re-activate the phone. Called Activation Lock. Read here:
    http://support.apple.com/kb/PH13695
    So, go back to the store where you got this phone & have them fix things.

  • I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?

    I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?
    I have an iPhone 4S and I keep getting those irritating notifications that tell me I need to upgrade my storage or free up space. I've deleted all I can from my music and photos without losing too many precious memories, but it's come to the point where I think I need to delete backups. However, I'm just worried that I will lose all and any log-in information that I don't remember and app/game progress that was saved to the iCloud. Please Tell me what will happen/what I can do?

    If you are asking what happens when you delete an iCloud backup, it only deletes the backup from your account.  It won't do anything to the data on your phone or in your iCloud account.  If you don't need to backup you can delete it.  (If you no longer want to back up your phone to iCloud, turn iCloud backup off in Settings>iCloud>Backup.  Then your phone will back up to your computer each time you sync it with iTunes.)

  • What will happen if i delete my icloud account from my macbook?

    I have both an iPhone 4s and and a macbook pro, they are both signed in on the same icloud account, which my dad's phone is also signed in to. if i delete my icloud account from my macbook what will happen? i have already deleted it from my iphone and everything was still there, what with my mac?

    You just need to sign out on the Mac, everything will be on iCloud but no longer on the Mac.
    System Preferences>iCloud>Sign Out

  • My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

    My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

    I never used icloud before so there is no data to back up from. I just spoke  to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
    Renee

  • Question about free down loading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns if I down load Mavericks then what will happen to Bangla

    Question about free downloading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns is, if I download Mavericks then what will happen to Bangla language in mountain lion? Samar Laha

    No reason to be embarassed. You are not alone.
    You will need an external drive. If you have a Time Machine drive without enough disk space you can create the clone there however it's advised that you keep your Time Machine and clone on separate drives. If the drive dies you loose both types of backup.
    Download and install the clone software. Everyone has their favorite. These are the two most common applications used. I prefer SuperDuper because of it's simplicity in setting up. It's also free for the first clone where with CCC you have to give a Credit Card then cancel if you do not want to keep.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html
    Select your drive in the To popup. Click on Copy Now. That's it.
    Yes, it really is that simple....

  • What will happen if adding a new node with current cluster, while new node's CPU is slower quality?

    Hello,
    Say, I have a 3 nodes RAC, I want to add a new node to current cluster... while the new node's CPUs are slower than the others.. what will happen?
    (my concern is : can I add this new node successfully? if yes, can it anyway improve the whole cluster performance or not?)
    Thank you
    s9225

    Also you can refer MOS note : RAC: Frequently Asked Questions (Doc ID 220970.1)
    Can I have different servers in my Oracle RAC? Can they be from different vendors? Can they be different sizes?

Maybe you are looking for