Whats the esiest way to create a new photo album in the photo option?

help i cant figure out to create new photo albums on the iphone

Have a Look Here:
https://discussions.apple.com/message/12290764#12290764
And Here:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Similar Messages

What is the proper way to create a new line space int the output?

I want to create a space in between each input so the output would look something like this,
Name of item 1: lollipops
Quantity of item 1: 10
Price of item 1: .50
Name of item 2: diet soda
Quantity of item 2: 3
Price of item 2: 1.25
Instead of this:
Name of item 1: lollipops
Quantity of item 1: 10
Price of item 1: .50
Name of item 2: diet soda
Quantity of item 2: 3
Price of item 2: 1.25
Here is my code:
for (i = 1; i < 4; i++)
               System.out.print( "Name of item " + i + ":");
               name = keyboard.nextLine();
               System.out.print( "Quantity of item " + i + ":");
               quantity = keyboard.nextDouble();
               keyboard.nextLine();
               System.out.print( "price for item " + i + ":");
               price = keyboard.nextDouble();
               keyboard.nextLine();
          }I know i can use the an empty output statement but is there something that will make my code neater?
Edited by: RandellK on Sep 27, 2009 6:23 PM

Just use an empty println.
It's a pretty common idiom and no messier than printing a newline.

What's the easiest way to create a new VLAN and then move all existing devices to it?

One of our locations was implemented using VLAN1 as the main (native) VLAN. My goal is to create a new sub-interface on the router and then move all the existing switches (all Layer 2) into the new VLAN, without disrupting the network (and remotely). I am trying to determine the best way to proceed. Thanks.

I wanted to shed a little more light on the situation. The "new" VLAN has actually been in existence since the network was initially setup. The network runs VTP and the new VLAN already has an interface on the router and already shows up on all the switches when you do a "sh vlan" command. We have about 10 VLANs in all. In reality, I am simply trying to migrate about 8 switches from VLAN1 (which they never should have been on) to the new VLAN. I know that I need to create an interface for the new VLAN on each of the switches and then swap the management IP to that interface. If I could connectly directly into each switch via the console port, this would be a simple task. However, the switches are in extremely remote locations with special circumstances, thus I have no physical access to them. This fact has me a little reluctant to making the changes, as we can't afford any mistakes that would potentially cause network downtime. I am looking for some guidance on exactly the steps to take to achieve my goal. Let's call the new vlan, VLAN2. During testing, I logged into a local switch that was on VLAN1 (that's where it had it's management address). It did have VLAN2-VLAN10 as well, via VTP. I created an interface for VLAN3 on the switch and then accessed it via VLAN3 to swap the main management interface from VLAN1 to VLAN2. The changes took, but I couldn't access it via VLAN2. I am assuming this is because the router still has VLAN1 listed as the native vlan and the VLAN2 IP address is still assigned to VLAN1 on the router. What would be the best way for me to make the required changes on the 8 switches that need swapped, without losing remote access? It wouldn't hurt if the network went down for 5 minutes or less, but we can't have a big outage. Thanks.

What's the "right" way to create a News list in CQ5.4?

Hey folks,
I'm a brand new CQ developer and, though I've done a lot of reading, I'm still in the dark on how to do a few things.
I'm currently working on a corporate website, and I need to build a News page. Each article contains a title and rich text (possibly including embedded images, videos, etc...), and the News page itself should display a paginated list of recent article summaries (with "read full article" links). I also need to show the two or three most recent article summaries on the site's front page, under a News heading.
I thought there'd be a pre-built component to cover this case, since most corporate sites include a News page of some sort, but I haven't found one. Am I missing it? I looked into the Blog page template, but I think that adapting that may be overkill.
I think that the right way to do this would be to build a News component with a Title and Rich Text field in the edit dialog. New articles could be created by dropping these components into the parsys of the News page. I could then create both a .html and a .summary view for the components and use a customized List component to display the summary list on the front page. Am I on the right track here, or am I overcomplicating it?
Thanks!
- Michael

Hi,
The "right" way of building any list-like component is to extend the existing List component.
That is referenced in this documentation page:
http://dev.day.com/docs/en/cq/current/wcm/default_components.html#List
You can find it under /libs/foundation/components/lists
To create, for example, a 'News List' component, just create a new component under your /apps/myproject/components, setting 'foundation/components/list' as sling:resourceSuperType ans add your custom script to display each news item. see also [1]
That way you canprovide more renderers to be used around your site(s)
[1] - http://dev.day.com/docs/en/cq/current/developing/components.html#Developing%20a%20new%20co mponent%20by%20adapting%20an%20existing%20%20%20%20%20component
Hope this helps,

What's the best way to create and edit a PDF where the source document is also a PDF?

Hi,
To be specific, we are in the process of upgrading our A/P processes and we have received a user manual from the company we contracted for the upgrade. I've been tasked with customizing this manual for my company's specific processes (this is with the permission).
What is the best course of action to accomplish this? I thought I should save a copy of the manual, and then modify each page as necessary. I will be adding and deleting text and graphics. I have never used Acrobat before, but consider myself a quick study.
Any suggestions wil be greatly appreciated.

When Acrobat saves to Word 97-2003 format, it actually writes a Rich Text Format file - the binary .DOC format used by Word is a closed standard. The .DOCX format is just XML, and neither export process cares if you have Office installed or not. In theory, OpenOffice can read both types of file; but there does tend to be some minor difference between how OO arranges things and how MS Word does it.
The critical thing is that if the PDF file has structure tags (i.e. it's accessible), Acrobat can flow the content properly in the exported file and can identify things as headers, quotes, lists, tables, etc. If not, it has to guess what the reading order is based on where things are on the page, and it will often get confused by intricate layouts, spanned columns, etc. There are of course some things (such as Word Art) which don't survive the trip to PDF and back, and will show as an image.

What is the best way to create the layout for a single page website in Adobe Muse?

I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
Demo Website

How can I create a new catalog of all my photos with no develop adjustments?

I use Lightroom 4.3. I tried this by deleting the old catalog, and creating a new one, thinking that the develop adjustments would no longer exist after first deleting the old catalog. The develop adjustments were still there. (I deleted the catalog out of the lightroom sub-folder of My Pictures.)
The reason that I want to do this is that I have one folder (of about 800 important photos) where something went very wrong in Lightroom, and every time I try to pull up one of the photos my whole computer stalls. Everything works beautifully in my other folders. I even re-installed Lightroom. I want to re-add those dng photos without the develop adjustments. It doesn't bother me if none of my files have develop adjustments. I save all of my files after they are adjusted. I save the DNGs also.
Thanks,
Jennifer

One easy way: reset after importing (which can be done from library module - e.g. main menu, context menu, quick-develop...). If you can't even get that far, consider using exiftool to strip the xmp from DNGs and/or jpegs, or just delete xmp sidecar file in case of proprietary raw.

KEA0 what is the best way to create new Operating concern

Hello :
Please advise
1. what is best way to create new OP concern
copy from template or create data structure from scratch?
2. I try to copy from OP concern = IDEA but when click change DATA STRUTURE -I see only CE1xxx but I not see CE2xxxx, CE3xxxx, CE4xxxx ...
pls advise - how to? can I change data structure on CE2, CE3....
Thx in advance.
Manthana

If your data structure will be the same then do a copy. if the data structures are different then create from scratch ( or modify after copy). Copy saves time so you don't have to start from scratch.

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

I have use three free apple Id and now when I am creating a fourth time it's saying that it is the maximum. What must I do to create a new apple id. Plz help

I have use three free apple Id and now when I am creating a fourth time it's saying that it is the maximum. What must I do to create a new apple id. Plz help

Sorry, no way around this limitation on an iOS device. To use a new iCloud account, you need to create such on a computer first, then setup the account on your iOS device.

What is the best way to create a database schema from XML

What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# further

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create Aperture book from Pages '09 document?

What is the best way to create Aperture book from Pages '09 document?

There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

What is the best way to create a Flash site

Hello Everyone,
I am realtively new to flash. I created the splash page of
our site in flash but 1st off it takes to long to load as it is.
But I would like to create the entire site in Flash. What is the
best way to create a Flash site, and are there tutorials out there
or any really good books, resources, or online classes to learn
Flash well. I understand the basic of flash and have created
banners, and other flash materials.
Can anyone help?

For me, as a noob, It's all about creative problem solving.
For lots of stuff, there's no right or wrong solution, but you have
to figure things out on your own. I, too, have built sites from the
ground up, and then rebuilt them even better. It's the only way to
really learn it well. Books, online forums, help docs all sort of
help, but it all comes down to how innovative you can be with
integrating them all into a site that is completely yours.
This might save you loads of headaches: avoid using scenes,
unless you are doing only animation. Keep each of your 'pages' on
their own keyframe, and use 'gotoAndStop' to navigate through them.
This is perhaps the easiest way to create a website quickly.
P

Whats the best way to create USER variable in BI Apps?

I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
We have USER variable already defined in the BI Apps rpd.
In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
Whats the best way to create USER variable for EBS Security Context init block?
1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
And i was told that it should not be done.
Let me know how can it be done.
Thanks
Ashish

Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
Thanks
Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

Whats the esiest way to create a new photo album in the photo option?

Similar Messages

Maybe you are looking for