Wheel permissions / removing from OS X 10.8.5

This is a two part question concerning permissions.
looking at the systems permissions for duplicates, what do they serve as apart of permissions listed? "Administrator Read & Write"
Other being; "i-Tunes". I also find the results of Disc Utility coming up with permission only for i-Tunes, and continue to fix them over, and over again.with out seeing anything wrong but a list?

If your system meets the minimum configuration listed for OS X 10.9, here is no reason why it should not "work."
The upgrade is straightforward and OS X 10.9 has been released for quite awhile and is stable.
Obviously, no one here (or anywhere else) can guarantee anything. Have a complete backup before you do an update (or any other software change).
Barry

Similar Messages

Executable permissions removed from resource files

when DVD pro burns DVDs it removes the executable permissions from programs/installers that are stored on the DVD? (via DVD-ROM >> Content)
how can i keep the executable permissions? i currently zip the files but this is not an acceptable solution.
any ideas appreciated.

Sorry I have just noticed that after clicking OK and re-opening the Setup properties the DLL is not removed but the data subfolder where it is located gets relocated in Source Files -> Destination View to one folder level up
Is this a bug Labivew Projects->Build Specifications->Installer???

List used to add permissions to InfoPath form updated, but people removed from the list still getting permissions.

I have a list that gives users Contribute permission to an InfoPath form during a workflow action. This list has changed, and I have added and removed users from it. The people who I've added are getting permissions, but the people I removed are STILL getting
permissions, even though they are nowhere on the list. What could be happening? I would greatly appreciate any help!
Thank you,
-Lyssa Prince

I must not be explaining this very well, and I apologize for that.
These are time sheets we're working with, so each user needs a certain set of people to approve and review his/her time sheets. The workflow we have running on each time sheet created reads which department the user is in, matches them with the row that
contains the field "department" that matches their department, and gives permission to all of the users in the remaining fields TS Approvers and TS Reviewers. If I update these fields at all, the new users in these fields get permissions for that department's
time sheets, but the people I removed from these fields do not stop getting permissions. It's as if there is a cached copy of the list which is being used by the workflow to assign permissions. This list will fluctuate, so it is not a viable solution to keep
running powershell scripts to remove people from each of these items after they have been removed from the list.

Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

My user was removed from the wheel group automatically.

On the second day after doing a system update (which installed Gnome 3) I noticed that my user was removed from the wheel group. Any idea what did it?

Hmmm.. actually the only thing I did was turn on auto-login as my non-root user in System settings->User Accounts after unlocking it (the prompt asks for root pass). I'm not sure if that was before or after this happened though.
I haven't changed any group related settings since almost a year ago. It seems a little odd that this happened. Not a big deal though, since I re-added my user to the wheel group, but I'd still like to know how and what changed it.

Removing from an FTP server

Hey Guys,
Say you have an image or file you want to remove from an FTP server, what method would you use in the FTPClient? the deleteFile(String arg)?
Thanks,
ArchBytes

If you are using Apache Commons net API the answer is yes.
Provided the login which you have used has respective permissions to do that.
for more info please refer the API.
http://commons.apache.org/net/api/org/apache/commons/net/ftp/FTPClient.html

Country removed from subscription list

I was just wondering why Sierra Leone was removed from the subscription list. Sierra Leone is the only country that I call using skype, but there are cheaper ways to call if skype no longer provides that subscription. Skype's losing lots of business. Not just from me. From Peace corps families nation wide!

I must not be explaining this very well, and I apologize for that.
These are time sheets we're working with, so each user needs a certain set of people to approve and review his/her time sheets. The workflow we have running on each time sheet created reads which department the user is in, matches them with the row that
contains the field "department" that matches their department, and gives permission to all of the users in the remaining fields TS Approvers and TS Reviewers. If I update these fields at all, the new users in these fields get permissions for that department's
time sheets, but the people I removed from these fields do not stop getting permissions. It's as if there is a cached copy of the list which is being used by the workflow to assign permissions. This list will fluctuate, so it is not a viable solution to keep
running powershell scripts to remove people from each of these items after they have been removed from the list.

Automatically removed from group conversation for being idle?

Where I work, we have a group/team conversation for people to ask questions, make comments, share information, etc.
In the past few weeks I have noticed that I have been being removed from this group conversation. Find the message "You have been removed from this conversation."
I usually start this conversation but leave permission open for everyone so anyone can add people as they come in for later shifts. I know it's possible to right click on a person's name and remove them from the conversion.
When this started happening, I researched how to stop it from happening and found that if I changed the permissions to me alone, I am not removed from the conversation.
My questions are: does Lync automatically remove a person from a conversation if they are idle for a certain amount of time? If so, what is the time frame? Does just that person have to be idle or the entire conversation?
Essentially, I'm trying to find out if some person is actively removing me or if it's some automatic setting within Lync.

Yes there is a timeout, it's per person but mostly the entire conversation though due to "sending or receiving and instant message. You can't easily turn it off, but you can change the value a bit. See set-csclientpolicy setting
ConferenceIMIdleTimeout.
http://technet.microsoft.com/en-us/library/gg398300.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

What could cause a server to be removed from the farm other than running PSConfig and removing it?

Hi,
We had a strange issue today. One of our two production WFE servers in our SP2010 farm had become disconnected from the farm. I noticed it because I had created a new site collection within an existing web site last week but it was only available on
one WFE. I didn't think for one second that the server had already been removed from the farm but I had decided I would remove it and re-add it to see if that would fix the issue. When I ran PSConfig to remove it I found the following:
I checked the log:
Entering function WelcomeForm.TryToLoadTheFarm
Found a task by the name of initialize in the task collection
Entering function Farm.Farm
Leaving function Farm.Farm
Entering function Farm.TryIsJoinedToFarm
Entering function get CommandCollection.this[string key]
Entering function CommandCollectionBase.Get
Found value in collection for key initialize
Leaving function CommandCollectionBase.Get
Found command initialize in collection
Leaving function get CommandCollection.this[string key]
Entering function Command.this[string key]
Entering function CommandCollectionBase.Get
Found value in collection for key B2B_UPGRADE
Leaving function CommandCollectionBase.Get
Found parameter B2B_UPGRADE in collection
Leaving function Command.this[string key]
Clearing cached Farm objects to reload
Entering function Farm.Clear
Entering function CentralAdminServiceInstance.Reset
Leaving function CentralAdminServiceInstance.Reset
Leaving function Farm.Clear
My cached Farm object is null, so will load it
Calling SPFarm.Local and SPServer.Local to get the local farm objects
SPFarm.Local returned a local farm
SPFarm.Local retuned a farm, but SPServer.Local returned null. Failed to connect to the farm, except in B2B Upgrade.
Entering function Farm.Clear
Entering function CentralAdminServiceInstance.Reset
Leaving function CentralAdminServiceInstance.Reset
Leaving function Farm.Clear
Leaving function Farm.TryIsJoinedToFarm
Failed to successfully try to see if this server is joined to the server farm.
The operation will continue so that you can force a disconnect from a server farm that cannot be contacted
Resource id to be retrieved is FarmIsJoinedFailureWhileUsingUICanOnlyDisconnect for language English (United States)
Resource retrieved id FarmIsJoinedFailureWhileUsingUICanOnlyDisconnect is Failed to detect if this server is joined to a server farm.
Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive,
the configuration database is inaccessible or this server has been removed from the server farm.
To diagnose this problem further, review the extended error information located at {0}.
If this problem persists, choose to disconnect from the server farm. After disconnecting, run the wizard again to create or connect to an existing server farm.
Anyone know what this line means?
SPFarm.Local retuned a farm, but SPServer.Local returned null. Failed to connect to the farm, except in B2B Upgrade.
Permissions were unchanged from before and I was running PSConfig elevated with the SharePoint admin account. So with this information along with the fact that the new site collection was not available on this server I concluded that it had been removed
somehow.
Has anyone seen this happen before? As it is a production server I'm going to have to explain this to the customer.
Thanks!

Hi Fridge,
In Sharepoint central admin,Manage servers in Farm,Does this show this WFE Server still?
Check if any ports(32843,32844) has been closed on the WFE server which got disconnected as these ports are used to communicate between WFE servers
Check if this is helpful
http://blogs.msdn.com/b/uksharepoint/archive/2013/01/21/sharepoint-2013-ports-proxies-and-protocols-an-overview-of-farm-communications.aspx

Removing "Deleted Photos to Remove" from Flickr Photostream

Some time ago I had uploaded one collection of photos through Flickr photostream.
Tonight I set up a second collection to upload. I edited the connection to change from "Public" to "Family and Friends" for this upload. It asked me whether to change previous photo permissions or not. At first I said yes. Then I thought it over, especially after a popup box told me that all ratings and comments would be deleted since I had a free Flickr account. Given that, I decided not to change them. So I went into the Flickr photostream window in LR4 (I have not yet published) and when I saw all the previous photos there to be republished, I selected them and deleted them, to avoid having them re-uploaded.
Unfortunately, it didn't have that effect. It put them in a group called "Deleted photos to Remove." I don't want them removed from Flickr. But I can't seem to get them out of this category so I can publish the new photos without removing them. How do I get rid of these images from this window so they won't be removed from Flickr when I upload the new images? Thanks.
grits5

Your response is extremely helpful. I began to understand that apparently I was in fact mixing Flickr & LR terminology, even though I didn’t realize it. Given that, you did a remarkable response. I can see that before going further, I need to clear up definitions and terminology.
As background, in the simplest terms I’m thinking of a collection as a catalog section that contains pointers to images (actual or virtual copies) as well as relevant metadata. With that, here’s what I see.
Publish Services Panel. Seems to be only an organizational tool for the program interface.
Publish Service. Hard Drive, Facebook, and Flickr seem to be examples of Publish Services. However I can right-click on Flickr and create another published service on Flickr. So what is a Publish Service, exactly, and why would you want more than one Flickr Publish Service? Perhaps because each Publish Service has its own set of parameters, meaning you could set one Flickr service to Public Sharing and another to Friends and Family. Or you could have different settings for export to Hard Drive? Or, you could set up to publish to an entirely different Flickr account? I’m guessing a Publish Service is simply code/parameters tailored uniquely to each place where you may want to publish?
Photoset. Because initially I right-clicked on the Flickr Publish Service and had the option to create a Photoset or Smart Photoset, I thought Photoset was a LR term connected with the Publish function. I now see if I right-click on Facebook, I get a different set of options – create Collection or Smart Collection. So probably Photoset is a Flickr term, not a LR term? (I’ve used Flickr very sparingly to this point.) I see why that led to confusion.
Publish Connection. Going to Publishing Manager allows me to set up a Publish Connection within the Publish Service. Oddly, when I do that, it seems to set up a second instance of the Publish Service. I’m tempted to think, therefore, that a Publish Service is the specific code tailored uniquely to where I want to publish, and the Publish Connection are the parameters used with that specific instance of the Publish Service?
Collection or Photoset. If I click on a collection under Facebook, or a Photoset under Flickr, I see the relevant photos in the grid, divided into the appropriate categories. (Is this what you mean by Publish Window?) So, what am I looking at? I thought I would be looking at a collection (regardless of what Flickr or Facebook might call it). I would have thought of it as a Publish Collection (pointers to images contained in it, metadata as to the update status of those images, etc.). Based on your comment above, I gather that’s not the case. You say I’m looking at output. I’m not sure what output means in this context. If it’s not a collection, is it a set of images generated on the fly based on the collection? If that’s the case, where do I see the actual Publish collection or smart collection?
Well, that's far more than enough for one post, but I bit the bullet and included it since it was all related. I'll let other items wait since right terminology and defintions are fundamental. I appreciate your help with what for me has been one of the most cryptic parts of LR, and one which is not dealt with in any depth in any of the LR books I have.
Message was edited by: grits5 to change text color to black.

Remove from production

hallo guys
i hv a very critical situation so anyone know how to solve that issue plzzz reply 2 me so fast
my problem is i create a user on FCSrvr with minimum of privileges ....only to see NOT to create,delete,copy,paste,duplicate,export...just make him review
but when that user press on any production folder and press on any item inside that production and press right click on it....it show a list that list contain ( REMOVE FROM PRODUCTION )
so how can i deemed that ( REMOVE FROM PRODUCTION ) to make it unseen
so if any one know plzzzzz reply to me fast
thank u again

That is a current limitation with Final Cut Server (FCSvr 1.1.1).
You can't currently have Production specific permissions.
Send a request to feeback.apple.com
Hope this helps.
Nicholas Stokes
XPlatform Consulting

After doing "remove from iCloud", songs are actually still up there!

I noticed a strange thing. I uploaded my own bands songs to iCloud via iTunes Match. There was some problem with the custom artwork and it got really messy (ID3 tags somehow couldn't be edited anymore in iTunes), so I decided to delete every trace of the songs from either OSX/iOS or iCloud.
So I deleted them from my library and deleted them from my iCloud ("also delete from iCloud"). They of course disappeared from iCloud on all my iOS devices.
I then copied "clean" tracks without any ID3 tags (the only thing that remained the same were the file names) to my hard drive and then imported them to the iTunes Library and turned on iTunes Match
To my surprise, iTunes Match MATCHED THEM and did not re-upload them. That means they stayed in iCloud despite the "delete from iCloud" step...
How is that possible?
That is a big problem, because lets say I upload 128kbit mp3 of an Album that cannot be matched. Then I decide to dig up the original CD, re-rip it in 256Kbit AAC and re-upload to iCloud. But how can this be done, if the old version still remains in the iCloud, even after "delete from iCloud" step in iTunes???

Hi,
I presume the iCloud status was originally shown as Uploaded. Are you saying that the iCloud status is now showing matched? I am not convinced that previously deleted songs are removed from apple's database. I have noticed that previously deleted songs are automatically show as uploaded immediately without going through the upload process again!!
However, if you re-ripped a cd at 256kbs AAC in place of a 128 mp3, i think that the new version would be matched or uploaded.
Jim

Delete mail from server after removed from IN BOX

I have a mail management issue I have not been able to fully solve.
I am balancing the same POP email accounts among the laptop using Mail (for home use) and my desktop using Eudora Pro (for work). Using Eudora, I can manually select to delete a message from the server. Eudora's manual deletions are flawless. Using Mail, the only option I can see that will help me do this is to select delete mail "When moved from In Box." If I hit the "delete" key, wouldn't that be the same as "moving if from the IN BOX?" When is the protocol actually carried out? On the next mail check? Immediately? Upon quitting and restarting Mail? I'm confused as to how this happens and why it does not seem to work all of the time.
Any and all assistance is most appreciated.
Much obliged,
Mick

Yes, deleting a message counts as moving it out of
the inbox. The commands to remove the message from
the server are sent the next time you check mail from
that server, but only if there are new messages to be
received from the server. Yes, many of us feel that
is a bug in Mail, that it should send the remove from
server commands the next time you check mail, whether
or not there are new messages to be downloaded.
Oh Gawd, I bet that's it. Yes, if that is the case, I would agree. It does not lead to efficient mail management if there needs to be a new message there. Do you know of any plans to change or alter that? Or has someone written an AppleScript of some kind to execute the command regardless?
It's a great command, otherwise. It's nice to be able to delete a message off of one computer and have it delete off of the server without any extra hassle.
Just wondering if there are any workarounds out there other than sending oneself a new message to get the delete from server command to activate.
cheers,
Mick

Delete emails from server when removed from phone inbox

I want my server (Verizon Yahoo) to trash and delete messages when I trash or delete them on my 5s. I have gone into my Verizon account on the phone, made sure Trash was selected rather than Archive, selected "Delete from server..."when removed from inbox"", restarted, etc. Everything else works in the account, and when I delete on the server, it is deleted on the phone. I want emails to delete from the server when I remove them from the phone's inbox. Supposed to happen, but doesn't.

Thanks for the reply. I wasn't very clear, I guess. What I want to do is Trash or Trash>Delete emails on my iPhone 5s and have them go away from the inbox on my Verizon/Yahoo server. That does not happen now, even though I have set the setting on my phone to do so. All the stuff in my inbox on the server reappears the next time my phone inquires, including the emails I've sent to Trash (on the phone) and those I've Trash>Deleted there. Not too worried about permanent, real, NSA-type deletion, because that just isn't going to happen - I am worried about the poor agent at NSA who has to read my boring, mundane emails, though. I just don't want to see stuff I've Deleted from my phone's inbox come back to the inbox. Zombiemail!

How do I fix project after "Remove From Version Control" corrupted it?

I am using RoboHelp 9.0.1 and installed both Tortoise SVN 1.6.9 and latest PushOK SVNSCC then added my large RoboHelp project to SVN. I was able to check in and out files from SVN but had several issues with it:
1) Super super slow. Working with folders or any renames would take 10 seconds per file and up to 1 hour if needed to refresh the root folder.
2) I could not perform some actions at all, such as delete, rename, or move folders. I kept getting COM errors.
I therefore decided that working with SVN and RoboHelp is not practical, at least not on my VPN so I decided to disconnect the project from source control and just work locally. The only option that I saw that sounded like it would do that was the "Remove from Version Control". This started a process that lasted for several hours. At the end of it, I now have several significant issues:
1) The order of the files and folders in my Project Manager is completely wrong now. I have almost 1000 topics and reordering all of them is not possible.
2) The Table of Contents, Glossary, and Index files appear empty. They had content before.
2) A couple of the Single Source Layouts I had created are completely missing.
3) Many, but not all, of the folders have tons of files with the extension ending in "_temp_removed_by_svn"
4) Many, but not all, of the files are actually gone from SVN so I can't recover a clean image. There was no warning that this command would actually delete the files from SVN (I thought it would just remove the version control connection).
5) Who know what other issue exist that I haven't seen.
Any idea how I can fix this?
Thanks in advance,
Dan

Are the "_temp_removed_by_svn" files in your local folder or SVN? Let us know how you get on with the new project. It sounds like something is wrong with SVN. Can you use the SVN Log command to see whether there is a different version you can restore. This might also give you an indication of what might have caused the problem. You could try deleting your CPD file. It gets rebuilt it is isn't there anyway. This file can become bloated and it is good practice to delete it when it gets close to 2mb in size. Your project is fairly large and has a lot of folders and may affect performance. Have you considered splitting them and merging the output? I know you probably don't want to consider this right now, but I think it may be a better long term solution.
The RoboColum(n)
@robocolumn
Colum McAndrew

Wheel permissions / removing from OS X 10.8.5

Similar Messages

Maybe you are looking for