When a PDF is opened in a tab, my laptop's touchpad scroll stops working for other tabs. (But works perfectly fine on the pdf tab or with every tab after closing the pdf tab)
My touchpad scroll was not working many times after i installed firefox 6. But it works perfectly fine in other browsers at the same time.
After some playing around, i found that this problem occurs only when a pdf is open in some tab (The scrolling works in pdf's tab but not in other tabs). Once that particular tab is closed, the scrolling starts working properly.
Using similar scroll function on my netbook. To add to the above, I find that using scroll is actually causing the PDF to scroll rather than the tab I'm actually in.
Reader 9 is installed on my Win7 Starter.
Similar Messages
-
After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?
Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
- com.apple.logic.pro.cs
- com.apple.logic.pro.LSSharedFileList.plist
- com.apple.logic.pro.LSSharedFileList.plist.lockfile
- com.apple.logic.pro.plist
- com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened. -
Problems with video out after closing the lid.
I bought a Mini-Display Port to HDMI and connected it to my macbook pro and to my tv....Everything is perfect i close the lid....Now i am pretty sure i read somewhere that you can still use your macbook if you have it connected to an external screen and even if the lid is closed...can anyone tell me if i have to do something in the preferences?or is it just normal...I am new with macs,just bought mine 1 1/2 months ago so please take it easy on me... :P Thanks
You can use the MacBook Pro after you close the lid it's called 'Clamshell Mode' but for it to work correctly you have to attached a keyboard and mouse as well as the TV, then you can close the lid to put it to sleep then touch a key on the keyboard or move the mouse and it will wake up again and display on the screen.
-
Dear sir while using the Internet 3G on my phone it getting hot at backside specially back panel below apple logo and after stopping the use of Net it becoming normal also for 3G I'm getting battery back up for 2 to 3 h
rs only plz tell me what to do plz reply it is normal or any problem with my phonePlease don't respond with useless comments. I've already addressed the fact that my screen was broken a few months ago. My phone may or may not be broken beyond repair either way, as I said before I can't afford a new phone. It's a strange problem because from what I can tell no one else has posted the same problem anywhere I can find. Don't be a dickhole.
-
Apps Tabs get don't reload after closing the firefox
I just today tried to use apps tab. I set some links as apps tab and then closed the firefox. When i stared it again the apps tab were not there anymore. However according to this release the apps tab should be retained even after closing the firefox
Go to about:config (enter it in the address bar), and find '''browser.showQuitWarning''' and set it to '''true'''. This will make Firefox ask you each time if you want to save your session to restore the next time you open it, like in 3
-
Music continuously plays even after closing the tab which played youtube video, restarting does not help either.
please update your version of the flash plugin & see if that works:
[http://get.adobe.com/flashplayer/] (make sure to uncheck the "McAfee Security Scan Plus" checkbox first if you don't want to install the bundled software) -
Paid for export PDF, worked for a while, but now tells me i only have free service so won't convert document
Hi dmkelec,
I did not find your account under the given email id.
Can you provide me the email id associated with your subscription that would be helpful.
Regards,
Florence -
When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud. I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file). I don't want to log into CC since I am not a subscriber, and this means that I have to work around, and go back to Bridge, and tell it to open the file in Adobe RAW. However, this does not work for older psd files which for some reason cannot be opened in RAW. How do I return to the process of simply allowing RAW files to open automatically in Adobe RAW, and simply right clicking on the image in Bridge to bring up the option of opening it in Photoshop?
<moved from Adobe Creative Cloud to Bridge General Discussion>
-
I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
new iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server. by the way i try to dowload from turkey.
anyone help me there? )=
-
Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When viewed prior to sending, the document is divided with black lines after each sentence.
Windows will only be able to open these if you have Word 2007+. Older versions of Word, for example Word 2003 would require a compatibility pack.
Perhaps you can try 'Saving As' a different file type instead?
Regards,
Steve -
Asset You can only post in new year after closing the previous year
Hi Experts,
I am getting below error while running the depriciation:
You can only post in new year after closing the previous year.
Message no. AA687
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
Note : I closed FY09, even though there were no assets in it at the time. The first asset was capitalized on 12/29/09 (clearly in FY10). I tried closing FY09 again and got the messege No year-end close is necessary for company code XXXX .
Could you please any one help me on this.
Thanks In Adwance
Regards,
Saritha.Hi Saritha,
Please check the following settings:
o Is there one ore more years since the last depr. run?
Solution: in this case an entry must be made into the table TABA.
Note 144441 gives a solution to make a "Dummy-entry".
o If there was never a depreciation run, the there must be 000/0000 in
TABA and T093D.
Solution: please take the report from the note Note 144441
and put the values 000/0000 in this fields.
o Do you have a non-calendar fiscal year (e.g. 2009/10)? In this case
you should have in the field T093D-AFBLG the year 2010.
Solution: Correction with note 26073
regards Bernhard -
OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?
I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu. -
I have an iPhone 6 with ios 8.1.1 operating system. The Bluetooth pairs with my Sony car radio and works fine. However, the iPhone will not stop searching for other devices. This does not seem to affect anything, but I can't help but think it is using battery power.
One possibility:
How do you know it is searching for other devices? Because you opened Settings > Bluetooth?
Why is it searching for other devices? Because you opened Settings > Bluetooth? -
Depreciation run problem."You can only post in new year after closing the"
Hi,
We are implementing Asset accounting to one of our co code.New Assets were created in Jan and when I tried to Post depreciation for Jan, I get an error log that says "You can only post in new year after closing the previous year."
When i double click on error message.
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
So I went ahead and opened the previous year, posted the depreciation, closed the year and tried to post Period 1 again, but still get the same error.
Why do I need to post the previous period if I just created the assets in this period?
I Have completed AJRW, AJAB also.
I think it may be a problem with Table. Please suggest me.
Thank youHi,
Please check the following :-
1. Check the Last Closed year in your Asset Accounting.
2. Check the Last Depreciation Posted in Your Asset Accounting.
These 2 menus are available in "Data Transfer in Fixed Asset Accounting".
revert back to me for further actions,
regards
N.Kumar
Maybe you are looking for
-
Imac to TV with horizontal bar
I connected my Imac to my TV using the mini-dvi to video adapter and it worked, however I have a horizontal bar going up across my TV screen. How do I fix this problem?
-
Can anyone tell me how I can fax a pdf from my Mac.
When I go under print and then fax pdf, I get a message saying I have no fax modem. I know this is a rudimentary question but I'm not mac savvy. How can I remedy this?
-
Oracle 8i and forms or reports 6i
this two palication are copatiblethere is not problem in developing on oracle 8i with developert 6i null
-
Migrating from single processor to dual processor Callmanager
Hi Networkers, had anyone install a Callmanager 4.1 dual processor version of CM4.1-K9-X345D= before in a single CPU in a dual processor capable server before. Can it work in the first place? Had anyone successfully migrate it to a dual-processor lat
-
Should I enable TRIM for Windows 7 Ultimate 64 for my MacBook Air?
Can I enable TRIM support in Windows 7 for my MacBook Air?