When clients ping server, they get the wrong ip address.

I have a server with the ip address of 10.0.1.10, but when clients ping the name "dyn01," they get 10.0.1.83.
If they ping "dyn01.local" they get the correct ip address.
I used server manager to look at DNS, and the ip address for the server is correct. I'm not sure what to try next.

Client IP is logged in the access log, which is CLF by default.
Do you need this info in the event log, as well?
What do you need client IP info for?

Similar Messages

How to handle when Client and server write to the socket at the same time

Hi all,
I'm writing a socket communication when client and server may write information the the socket at the same time. I look every where but the samples from the internet only shows example of server replies to client after receiving requests from clients.
Let's say that:
Client 1 ->Socket 1 -> Server 1
Now if there are two threads in the server, one blocked waiting for the input from client on socket 1, the second one write something on the socket to client 1, is it possible?
And if it's possible, if at the time Server 1 writes information to Client 1, Client 1 writes some information to Server 1 too, will there be any conflict problem or the socket could handle that two ways communication simultaneously?
It's critical questions for me. Thanks for your help.

I really use Server Client paradigm. However, beside the request, response mechanism, there is also an additional mechanism called update which server periodically send information update to client without the need for a request from client.
So you suggest client should initiate 2 sockets, one for request and response, one for receiving update from the server? Will this work?

My Apple ID is registered in wrong email address. How can i change it or else when the server reply me to check my email that i can't check due to they sent to wrong email address...

Please give advice of how can i change my Apple ID (email address) as it is wrong address. Like i just update my iPhone to latest version 6.0, and get the new app, iCloud which need me to key in my Apple ID and Password. I have no choice to use the wrong email address as it is already registerd since from 1st day i use my iPhone. Then i received the reply that tell me to check my email for verifing but the problem is i can't check my gmail as they sent to the email is not my actual gmail address....
How can i solve this problem?

You may change your Apple ID to any email address that is not already used as another Apple ID, or that is not already associated with another Apple ID.
In other words, if I have an Apple ID [email protected], and have alternate email addresses of [email protected] and [email protected], none of them may be used by me or anyone else for an Apple ID, Rescue Email, alternate email, or anything Apple-related.
If the Apple ID link above indicates your email is already in use then it is. Use https://iforgot.apple.com, select Forgot your Apple ID? and provide the information requested. If the email address is one you created and can still access, you may be able to retrieve it. If it is one someone else created, you will not.

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

When I attach a JPG file in my email and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it." Anyone know why and how to fix this problem?

When I attach a JPG file in my email message and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it so that they can save it." Anyone know why and how to fix this problem?

Your Windows friend should ask in a Windows forum why his email client won't open attached jpg files. We have no idea what email client he is using or how his Windows security is configured.

I'm embarrassed to ask this: when I click to initiate a new email message in the "From" box it automatically chooses the wrong email address (I have three but use one mainly). How can I get the right choice to appear automatically?

I'm embarassed to ask this: when I click on the new mail icon to write a new email message, in the box "FROM" appears the wrong email address: I have three but mainly use one. How can I correct this so that the right email address appears in the "FROM" box?

I assume this is Apple Mail. Try this:
Preferences > Accounts > your-first-account
Select Outgoing Mail Server of account/name you wish to use and check Use only this server
Repeat for other accounts.

TS4020 I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?

I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?

Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

I have downloaded firefox but when I open it I get the following message 'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'. What do I do?

I have downloaded firefox but when I open it I get the following message 'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'. What do I do?

See:
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I cannot read downloaded E-books on my computor (Windows 7). I am instructed to authorize my digital edition account. When I try to I get the message: Activation Server Error , Code E_AUTH_NOT_READY.

I cannot read downloaded E-books on my computor. I am instructed to authorize my account. When I try to i get the message :Activation server error, Code E_AUTH_NOT_READY

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

Yes I bought it and it wouldent play off my iPhone , so I bought it off my iPad 2 and lost it during a sync episode so I bought it twice and never sew it . It so hard to talk to some one when you rent movies from iTunes they get the money fast but if you

Yes I bought it and it wouldent play off my iPhone , so I bought it off my iPad 2 and lost it during a sync episode so I bought it twice and never sew it . It so hard to talk to some one when you rent movies from iTunes they get the money fast but if you have any trouble it's a series of things befor you get any real help that *****

iTunes support would be the only way i'm afraid.
http://www.apple.com/support/itunes/contact/

When installing Flash Player I get the prompt to close Dashboard Client. What is that and how do I close it?

When installing Flash Player I get the prompt to close Dashboard Client. What is that and how do I close it?

This link to a thread on this Adobe Flash Player forum explains how to kill (strong word) the dashboard client:
Dashboard Client
I assume you are using a Mac.

When i open EMC on 2010 cas server i get "the system load quota of 1000 requests per 2 seconds has been exceeded"

when i open EMC on 2010 cas server i get "the system load quota of 1000 requests per 2 seconds has been exceeded"
and it wont load

when i open EMC on 2010 cas server i get "the system load quota of 1000 requests per 2 seconds has been exceeded"
and it wont load
Close EMC and Powershell and run iisreset.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Hi i when i am trying to deploy an EJB module on weblogic server i get the

Hi all,
when i am trying to deploy an EJB module on weblogic server i get the the following exception on the server.
Exception:weblogic.management.ApplicationException: prepare failed for test Module: test Error: Exception preparing module: EJBModule(test,status=NEW) Unable to deploy EJB: D:\bea\weblogic81b\server\bin\myserver\upload\test.jar from test.jar: weblogic.ejb20.deployer.DeploymentDescriptorException: Unable to load a class specified in your ejb-jar.xml: Class bytes found but defineClass()failed for: 'HelloBean' at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:525) at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.(MBeanDeploymentInfoImpl.java:230) at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1256) at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:449) at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2792) at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1478) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1136) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:975) at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2571) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2523) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2453) at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:820) at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:536) at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:494) at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
[Deployer:149033]preparing application test on myserver
[Deployer:149033]failed application test on myserver
[Deployer:149034]An exception occurred for task [Deployer:149026]Deploy application test on myserver.: Exception:weblogic.management.ApplicationException: prepare failed for test Module: test Error: Exception preparing module: EJBModule(test,status=NEW) Unable to deploy EJB: D:\bea\weblogic81b\server\bin\myserver\upload\test.jar from test.jar: weblogic.ejb20.deployer.DeploymentDescriptorException: Unable to load a class specified in your ejb-jar.xml: Class bytes found but defineClass()failed for: 'HelloBean' at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:525) at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.(MBeanDeploymentInfoImpl.java:230) at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1256) at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:449) at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2792) at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1478) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1136) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:975) at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2571) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2523) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2453) at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:820) at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:536) at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:494) at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178) at weblogic.kernel.ExecuteThread.run(ExecuteThread

Hi, i am also facing the same problem.......
my ejb-jar.xml is
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar >
<description><![CDATA[No Description.]]></description>
<display-name>Generated by XDoclet</display-name>
<enterprise-beans>



<entity >
<description><![CDATA[Description for Account]]></description>
<display-name>Name for Account</display-name>
<ejb-name>Account</ejb-name>
<home>com.app.j2ee.bmp.interfaces.AccountHome</home>
<remote>com.app.j2ee.bmp.interfaces.Account</remote>
<local-home>com.app.j2ee.bmp.interfaces.AccountLocalHome</local-home>
<local>com.app.j2ee.bmp.interfaces.AccountLocal</local>
<ejb-class>com.app.j2ee.bmp.ejb.AccountBean</ejb-class>
<persistence-type>Bean</persistence-type>
<prim-key-class>com.app.j2ee.bmp.interfaces.AccountPK</prim-key-class>
<reentrant>False</reentrant>
 <resource-ref>
 <res-ref-name>jdbc/ejbPool</res-ref-name>
 <res-type>javax.sql.DataSource</res-type>
 <res-auth>Container</res-auth>
 </resource-ref>
</entity>
</enterprise-beans>



<assembly-descriptor >










<container-transaction>
 <method>
 <ejb-name>Account</ejb-name>
 <method-intf>Local</method-intf>
 <method-name>*</method-name>
 </method>
 <method>
 <ejb-name>Account</ejb-name>
 <method-intf>Remote</method-intf>
 <method-name>*</method-name>
 </method>
 <trans-attribute>Required</trans-attribute>
 </container-transaction>
</assembly-descriptor>
</ejb-jar>

Having trouble threading frames, getting the wrong loaded cursor, not the chain-links

Hi there, I am trying to thread frames, which hasn't been an issue for me previously. The cursor usually shows the chain link icon when hovering over the second frame, but today it is showing a square icon and when I try to click into the the second frame instead, it tries to create a new text frame. Any help is appreciated. Thanks!

i had put the two text boxes on different layers before to show that they were separate frames, they actually live on one layer together.
Re: Having trouble threading frames, getting the wrong loaded cursor, not the chain-links

When clients ping server, they get the wrong ip address.

Similar Messages

Maybe you are looking for