When Deploying SharePoint 2010 solution using Powershell gives me nothing

When Deploying SharePoint 2010 solution using Powershell gives me nothing
And when go to Central Admin >> System Settings >> Farm Management >> Manage Farm Solution
I found my Solution Status is Deploying and still deploying and nothing.

Hi,
According to your description, my understanding is when you deploy the SharePoint solution, the deploy status stuck on the deploying status.
To resolve this issue, I suggest you can do as the followings:
1. On any server, start, run, services.msc, enter, this will open the services console.
2. Now type s, this will give you all the services that start with S, look for SharePoint timer service and make sure it’s in started mode.
3. This service should be started on all the front ends as well as application server.
More information:
Solution deployment stuck on deploying: SharePoint 2010
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Deploy SharePoint 2010 Sandbox solution to SharePoint 2013

Hi All,
I have sand-box solution which is developed in Visual Studio 2010 for SharePoint 2010 ,And it is specially developed for branding the SharePoint 2010 site. Now I need
to add the sandbox solution to SharePoint 2013 Site.
Can any one help how can I do this.
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .

Hi siddiqali,
According to your description, my understanding is that you want to deploy SharePoint 2010 Sandbox solution to SharePoint 2013.
Most of the wsp Solutions deployed in SharePoint 2010 should work fine in SharePoint 2013. This is because of the Support for both 14 Hive and 15 Hive directories that are Created in SharePoint 2013 by default.
Initially, when you deploy a SharePoint 2010 Solution it gets deployed to 14 Hive and not 15 Hive. To force the solution to install in 15 Hive you need to modify manifest.xml file of your solution and add addSharePointVersion=”15.0” attribute to it. The
Solutions can be forced to install in 15 hive. However, some of the files especially that refers to _layouts might not work. All SharePoint 2010 Solution files that refers to _layouts folder (i.e. Features, Layouts-files, Images, ControlTemplates)needs to
be updated, the best approach is to re-create the Solution in Visual Studio 2012.
More information, please refer to the link:
http://www.learningsharepoint.com/2013/03/24/deploy-sharepoint-2010-solutions-in-sharepoint-2013/
Here are some similar posts for you to take a look at:
http://www.threewill.com/2013/10/migrating-a-sharepoint-2010-solution-to-a-sharepoint-2013/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/30fe4cb9-ea11-46d0-868d-4306d915b4db/how-to-convert-sp2010-wsp-to-sp2013?forum=sharepointdevelopment
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How can i deploy sandboxed solution .wsp file to sharepoint 2013 online using powershell script?

Is there any way to deploy the Sandbox solution .wsp file to sharepoint 2013 online publishing site using powershell or CSOM or any other way?

Hi,
According to your post, my understanding is that you wanted to deploy sandboxed solution .wsp file to sharepoint 2013 online.
"Add-SPSolution" command is not available in SharePoint Online management shell. So, we cannot use PowerShell to update and deploy a solution in SharePoint Online environment. Meanwhile, here is index of Windows PowerShell for SharePoint Online
cmdlets for your reference:
http://technet.microsoft.com/en-us/library/fp161364.aspx
You can CSOM to deploy solution using helper class from CodePlex. The activation code is as follows: SandboxSolutions.ActivateSolution(siteCollectionURl, cookies, "solution_name.wsp");
About the Client Side Object Model (CSOM), it is a development related issue, we have a specific support channel for the SharePoint developers, so I recommend you go to our MSDN forum for further assistance.
Here is a similar thread for you to take a look at:
http://community.office365.com/en-us/forums/156/t/197404.aspx
In addition, if you would like to upload and activate sandbox solution manually, you can refer to:
http://community.office365.com/en-us/forums/154/p/64010/244496.aspx#244496
Best Regards,
Linda Li
Linda Li
TechNet Community Support

SharePoint 2010 Report using a Shared Data Source Connection file (.rsds) is forcibly closed.

Hi -
When attempting to render a report (.rdl) in a SharePoint 2010 document library that has a
Connection Type specified as a Shared data source (the connection succeeds when tested in the SharedDataSource.aspx page), the following error message is displayed in the report:
The data source that I'm using passes the test when tested in isolation but when used in the report it yields to the error message above. Below are some of the details of the .rsds file:
For this particular Web Application, Kerberos has been enabled. I couldn't spot any traces in ULS nor in the Security Windows logs.
Any feedback on how to fix this issue is appreciated.
Thanks.

Hi
There are multiple resolution found for the same issue, please refer
http://www.marc-lognoul.me/itblog-en/an-existing-connection-was-forcibly-closed-by-the-remote-host/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/4ad2a302-8a77-44f3-91ce-803d36efc9c5/sharepoint-2010-an-existing-connection-was-forcibly-closed-by-the-remote-host-when-log-in-using?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/235ca863-f540-4fa0-9688-0b0b46c2d75d/sharepoint-2010-an-existing-connection-was-forcibly-closed-by-the-remote-host-when-log-in-using?forum=sharepointadminprevious
Let us know if this helps, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Getting HTTP 403/500 errors when accessing SharePoint 2010 pages

Hi,
I'm getting intermittent HTTP 403/500 errors when accessing SharePoint Foundation 2010 pages.
When it happens, any SharePoint pages I access I get a HTTP 403 error (example: /sites/test/default.aspx) . If I don't specify a page, I get a HTTP 500 error (example: /sites/test/). What's odd is that I have non-SharePoint .NET applications running on the
same server under the "_layouts" directory and those still work just fine.
After recycling the IIS application pool, it starts to work again, but sometime won't stay up very long.
Does anyone encounter this problem before?
TIA
Also, I'm hoping to understand what the "Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo" method does to help me track down this issue. If you have any info on what the above method is doing, I really appreciated.
EVENT LOG
Nothing
ULS LOG
System.Runtime.InteropServices.COMException: Cannot complete this action. Please try again.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)
at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)

These are the associated lines in the ULS.
01/07/2014 02:59:24.33   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Name=Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)
e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Monitoring   b4ly   High   Leaving Monitored Scope (PostResolveRequestCacheHandler).
Execution Time=6.79828022835305   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Runtime   tkau   Unexpected   System.Runtime.InteropServices.COMException:
Cannot complete this action. Please try again.    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32
iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid&
pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl,
Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage,
String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders,
String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Monitoring   b4ly   Medium   Leaving Monitored Scope (Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)).
Execution Time=187.132582493026   e8e08e76-1b88-4913-bce6-b9300e7b63f6
Thanks,

Filtering a sharepoint 2010 list using Multiple values from Multi-Select Filtering In Infopath 2010 form

I am creating a browser based InfoPath 2010 form Calendar Filtering
using SharePoint 2010 Calendar List (All Events) and InfoPath 2010. This form has data connection to the Calendar list. Goal is to
compare Calendar Events from Current Year to Previous Year. I have 2 columns called - Previous Year and Current Year. I have 2 drop-down controls in each columns called
Select Year and Select Week. I also have common drop down called
Select Category which holds category of the events such as weather, power outages and so on. I wish to display specific events on specific date and specific week on both columns.
I am able to filter the list based upon Year and Week
on both these columns by applying rules in the InfoPath 2010 form. The real issue is that I want to apply category filter on the search result of
Year and Week. Or it needs to show all the values if I
select Category value as All. So I wish to apply filter on Search results using Category drop-down list selection.
Hope I could explain this better but I tried to do the best here. Any suggestions, hint, or pointers
Thanks
Snehal H Rana
Thanks Snehal H.Rana SharePoint Consultant

I am creating a browser based InfoPath 2010 form Calendar Filtering
using SharePoint 2010 Calendar List (All Events) and InfoPath 2010. This form has data connection to the Calendar list. Goal is to
compare Calendar Events from Current Year to Previous Year. I have 2 columns called - Previous Year and Current Year. I have 2 drop-down controls in each columns called
Select Year and Select Week. I also have common drop down called
Select Category which holds category of the events such as weather, power outages and so on. I wish to display specific events on specific date and specific week on both columns.
I am able to filter the list based upon Year and Week
on both these columns by applying rules in the InfoPath 2010 form. The real issue is that I want to apply category filter on the search result of
Year and Week. Or it needs to show all the values if I
select Category value as All. So I wish to apply filter on Search results using Category drop-down list selection.
Hope I could explain this better but I tried to do the best here. Any suggestions, hint, or pointers
Thanks
Snehal H Rana
Thanks Snehal H.Rana SharePoint Consultant

Count documents in a SharePoint online library using PowerShell

Hi,
I would like to use PowerShell to iterate through a site (and its sites) and count how many documents are in each document library.
Does anyone know if this is possible for SharePoint online please?
Thanks

yes. You can set an ID on counter. I don't have any idea about how to do that from the PowerShell but from SharePoint online it is possible by going in to document library settings and then select default view (All documents). Then go and then select
ID as column and there is an option over there Total. If you select the ID column drop down you will get an option called count select that and click ok. Then go back to your document library and see the count of the documents you have in your doc library.
If you find this information helpful then please propose this as answer and vote. Thanks.

Deploy Office 2010 by using Group Policy - Invalid switch - "/config"

Hi All,
We are following steps described in this article -
http://technet.microsoft.com/en-us/library/ff602181.aspx . However it won't work and will terminate with error code 1 - "Setup ended with error code 1". Further investigations has shown that error is produced by start-up batch script due to Invalid
switch - "/config". According to the above article to trigger an install we need the following:
start /wait %DeployServer%\setup.exe /config %ConfigFile%
However it will fail with the error: Invalid switch - "/config", because obviously "/config" switch does not belong to START command
It seems to work if we will use the following (without START /WAIT):
%DeployServer%\setup.exe /config %ConfigFile%
Could anyone please elaborate on the above?
Also why would we want to use START /WAIT at all?
TY

So, you figured out that this problem occures if path to deployment share, config.xml and setup.exe has spaces in it, that is absolutely true.
But I see another workaround, not changing your share path to have no spaces in it.
I suggest changing the setup script.
Do the following:
1) Find this part of the script:
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
start /wait %DeployServer%\setup.exe /config %ConfigFile%
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
2) Use quotes wisely to get something like this:
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
start /wait "%DeployServer%\setup.exe" /config "%ConfigFile%"
echo %date% %time% Setup ended with error code %errorlevel%. >> "%LogLocation%\%computername%.txt"
As you can see, I used quotes to mark those parts of scipt that will have spaces in UNC paths when running the script in cmd.
It did the trick for me and i have spaces in my UNC path to setup share :) Hope that helps.

How to get list of all sp farm solutions using powershell?

is there any powershell script can list down all solutions deployed on farm in txt or cvs file?

Thanks. but this is showing all features. I need only our custom developed features
Get-SPFeature >> c:\temp\feature.txt
Let me know how to get?

Failure When Deploying EJB Project That Uses Library Onto Glassfish

Hi,
I have a multi project application that I am developing and I am having issues testing it. I have set up a EAR, WAR, EJB, and two library JARs. The EJB contains classes that use components from the library JARs or implement abstract classes from the library JARs. I have added the library JARs to the compile-time libraries of the EJB. I then also added the library JARs to the libraries of the EAR. However when I then go to deploy the EAR onto the Glassfish server I get this error, displayed in the Glassfish log: 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClass 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClass 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClass 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClas 
SEVERE: Class [ com/foo/sdk/core/InterfaceClass ] not found. Error while loading [ class com.foo2.BeanFooClass ] 
SEVERE: Exception while deploying the app [FooEAR] 
SEVERE: Invalid ejb jar [BeanFoo.jar]: it contains zero ejb. 
Note:
1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.
2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.
3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.
java.lang.IllegalArgumentException: Invalid ejb jar [BeanFoo.jar]: it contains zero ejb.
Note:
1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.
2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.
3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.
 at com.sun.enterprise.deployment.util.EjbBundleValidator.accept(EjbBundleValidator.java:76)
 at com.sun.enterprise.deployment.util.ApplicationValidator.accept(ApplicationValidator.java:128)
 at com.sun.enterprise.deployment.EjbBundleDescriptor.visit(EjbBundleDescriptor.java:730)
 at com.sun.enterprise.deployment.Application.visit(Application.java:1768)
 at com.sun.enterprise.deployment.archivist.ApplicationArchivist.validate(ApplicationArchivist.java:799)
 at com.sun.enterprise.deployment.archivist.ApplicationArchivist.openWith(ApplicationArchivist.java:277)
 at com.sun.enterprise.deployment.archivist.ApplicationFactory.openWith(ApplicationFactory.java:240)
 at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:170)
 at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:93)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.loadDeployer(ApplicationLifecycle.java:826)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.setupContainerInfos(ApplicationLifecycle.java:768)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:368)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
 at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:370)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:355)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:370)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1067)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:96)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1247)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235)
 at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:465)
 at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:222)
 at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:168)
 at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
 at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:234)
 at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:822)
 at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:719)
 at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1013)
 at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:225)
 at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
 at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
 at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
 at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
 at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
 at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
 at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
 at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
 at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
 at java.lang.Thread.run(Thread.java:679)
SEVERE: Exception while deploying the app [FooEAR] : Invalid ejb jar [FooBean.jar]: it contains zero ejb. 
Note:
1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.
2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.
3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly. 
I am using these technologies:
NetBeans IDE 7.0 for Java EE
Glassfish 3.1
I did read that putting the libraries in this directory: <glassfish_home>/domains/domain1/lib may resolve the problem, however there must be a better way.
Any help would be greatly appreciated!
Edited by: 866180 on Jun 15, 2011 2:32 PM

First of all, use a normal font when posting a question. This is just terrible to read.
You have multiple failures here. Did you actually read and try to understand the error?
java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClassJava is not going to lie, this class is not on the classpath of the application. Either the jar is missing, the class is missing from the jar or you put the jar in the wrong place. Open up the ear using your favorite zip tool and check out its structure. What is the path to the jar inside it?
Also, open up the META-INF/manifest.mf file inside the EJB jar. Is there a class-path line in there? There shouldn't be!
A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean. Apparently your EJB jar contains not a single EJB or MDB class. Did you forget some annotations perhaps?
Seems to me that your application compiles, but other than that it is very much broken.

Is it possible to get Exchange emails downloaded to SharePoint document library using Powershell and or Custom Workflow?

I have been asked to see if it would be possible to get exchange emails downloaded and or sent to a document library .
I know of the sitemail box app. but we are not running Exchange 2013.
and setting up the lists and or document library to receive emails using the built in doesn't seem to be working...( maybe not configured correctly, i would need to see what the prior admin/developer did)
But is there a way to get the emails downloaded to a document library using a workflow and or a powershell script that is triggered via workflow?

Hi,
Since workflow can only work on items in SharePoint sites, they cannot get Exchange emails, let alone download emails to SharePoint library. However, you could manually save email to local and upload it to SharePoint list/library.
I'd suggest you toubleshooting the incoming email settings in SharePoint. Please refer to the article below and check your configuration:
https://technet.microsoft.com/en-us/library/cc262947.aspx
http://blogs.technet.com/b/harmeetw/archive/2012/12/29/sharepoint-2013-configure-incoming-emails-with-exchange-server-2013.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Column width issue in SharePoint 2010 Reports using SSRS webpart

Dear sir,
We need to adjust column width for output of reports. We are using SSRS webpart to generate reports. It is taking unexpected column width.
We show that dynamically we cannot set the column width but we are passing the query statically is there any way or chances to mange column width.
Please help.

If it's important, I'd suggest ringing Microsoft Premier Support and logging a call. The working world is probably just getting back to their offices.
For both columns, you can think about some JQuery to isolate the appropriate selectors and just reside them in the page rendering. You'll need JavaScript enabled in your browser for this but this code within a CEWP should do the trick.

<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js"
type="text/javascript"></script>
<script type="text/javascript">
$(function(){
$("TH.ms-vh2-nograd:contains('Status description')").css("width", "150px");
$("TH.ms-vb:contains('Type of Work')").css("width", "150px");
</script>
You'll need to link to a JQuery instance of course and change the capture text for your columns.
Credit to the code to Kjell-Sverre Jerijærvi from his
blog post.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

SharePoint 2010; Re-using profile and social database in User profile service applicaiton

Hi
Using ms server 2008r2, sql 2008r2, 2 WFE and 1 Appserver and SQL cluster.
I have restored my User profile service application using restored databases profileDB and SocialDB, the SyncDB was recreated as i had problems starting the user profile synchronization service when using the old SyncDB.
I mangaged to create and start a full conections sync to Active Directory and got all my 6000 profiles inn. Ok.
This morning I noticed that the number of user profiles was only 2000, so im wondering what could have happened..
I did notice that the user sync was very slow yesterday.
ps; I did not think/know about exporting the Microsoft Identity Integration Server Key (MIIS) encryption key earlier,
so i dont have this key. That is probably why the backuped old synchDB did not work.
Any ideas?
brgs
Bjorn

http://technet.microsoft.com/en-us/library/gg576965(v=office.14).aspx Under
" Back up a User Profile Service service application (UPA) using SQL Server tools " :
It is very important to export the "Microsoft Identity Integration Server Key (MIIS) encryption key" from the old environment to the new farm, when restoring the UPA to a new farm. The reason being is that you will be unable to start the UPA synchronization
service with the restored SynchDB without importing this key. And if you only use the restored SocialDB and ProfileDB with a new SynchDB, you will experience problems with losing Profiles in your UPA.
My initial sync gave me all 6000 users, while this morning I suddenly had 2700:-).
My problem is that we deleted the old servers and I don’t have this key:P

When Deploying SharePoint 2010 solution using Powershell gives me nothing

Similar Messages

Maybe you are looking for