When I click on free upgrade to Mavericks it says 'we could not complete your purchase, The product distribution file could not be verified. It may be damaged or was not signed.' What should I do? Thanks
When I click on free upgrade to Mavericks it says 'we could not complete your purchase, The product distribution file could not be verified. It may be damaged or was not signed.' What should I do? Thanks
Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
If possible, test on another network, such as a public hotspot (if the computer is portable) or the hotspot created by a mobile device. A network gateway that blocks some traffic, most likely on a company or university network, could be causing the error.
Step 2
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 3
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 4
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
I can `t buy OS X Mountain. A game can buy. When I click on the Buy Now button, this message appears: We could not complete your purchase, the product distribution file could not be scanned. It may be damaged or not signed. I have macbook air 11-inch Mid 2011.
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type or copy / paste: /Library/Preferences/SystemConfiguration
Click Go then move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store. Try purchasing Mountain Lion. -
when ever i'm tring to install an app from the app store i'm getting the following error.
"We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed".
someone plz help me to overcome this.Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall -
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I tried to re-download Mavericks after an apparent failed attempt and now I get the message "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
Can anybody help?Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 2
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 3
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
When clicking 'buy' for Mountain Lion in the App store I get the message "product distribution file could not be verified, it may be damaged or was not signed' Anybody know why I get this message. Thanks
Make sure your Mac qualifies for Mountain Lion > Upgrade your Mac to OS X Mountain Lion.
If you have anti virus software installed, disable that before downloading apps.
Turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
Try deleting the cache, cookies, and preference files (plist) associated with the App Store.
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store. -
Hi Guys,
I wanted to upgrade to Maverick but encountered this diffcult "The product distribution file could not be verified. It may be damaged or was not signed"
Need your help.
Thanks
CMKonghttp://www.apple.com/support/mac/app-store/contact/
-
The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
The product distribution file could not be verified. It may be damaged or was not signed. what should i do ?
surely the apple firewall does not intercept garageband communication? would temporarily turning firewall off to download/update be a safe option?
regards -
when trying to download Mountain Lion after click on buy I get this message: The product distribution file could not be verified. It may be damaged or was not signed.
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Always search the forum before posting. This is asked at least three times just below your post.
https://discussions.apple.com/thread/3604789?tstart=0
https://discussions.apple.com/thread/4153268?tstart=0 -
I have a 2011 macbook pro 13 inch. when I try to download mavericks I get a message saying the product distribution file could not be verified. It may be damaged or missing. Please help.
Mavericks installer can’t be verified
-
When I try to upgrade to Mountain Lion OS form Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, what is causing this problem, how can I find a solution, is someone else having this problem?
The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
I have 10.7.5 When I try installing Mavericks, it says this: The product distribution file could not be verified. It may be damaged or was not signed. WHY?
-
I am running Lion 10.7.4. Tried to download the OS X Mountain Lion upgrade in my App Store - getting: The product distribution file could not be verified. It may be damaged or was not signed.
Any ideas?Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Maybe you are looking for
-
New line character in File adapter
I am having a receiver file adapter which generates files with multiple lines. My problem is when the target file is opened in notepad there is no line break and the lines comes as continous string with small rectangle as separator.This fails the tar
-
Hi, I have a problem with the APEX mail queue. It cannot be pushed. The mails just stand there. Things that I have tried: 1) Tried to push the mails via the internal Workspace Administration 2) Tried to push it via the command line as the schema assi
-
WebLogic 9.2 MP1 - NoClassDefFoundError: weblogic/xml/domimpl/Saver
Hello, I'm currently experiencing the following error in our production WebLogic environment. Curiously, the same WAR file deploys and works fine on our QA and STAGE servers. I must admit that my debugging knowledge of WebLogic is limited, but I have
-
How can I heal a "transparent" area?
I've got a panorama that has several narrow "missing" areas at the top, due to the geometry and the sloppiness of the handheld shooting. It seems like it should be no problem, because the sky is pretty much white, though not quite (about 89-89-89) .
-
Invoke a method by getting method name from properties object
HI , I am storing method names in a properties file . Can any one tell me , how can I invoke those methods ?? Please Urgent. Here is the sample program what I am trying to do . Please tell me how to invoke method which is represented by the String "m