When i closed the Report , ODI Designer Tool also closed.

Hi ,
Through ODI Open Tool , genarated a report as PDF.
In My code i wrote 'jasperViewer ' so when i excuted through tool it will automatically opend, after seen that View Report and closed that Reoprt, total ODI tool also closed.
when i closed the Report , ODI Tool also closed. where is the problem.
So can Give me alternative Solution.
Regards
Raghav

Hi Josumon,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
Mac Basics: Messages
http://support.apple.com/kb/HT5395
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
You may need to uncheck the "Enable this account" and then place the checkmark again to reset this for your Apple ID.
Messages (Mavericks): Set up your accounts
http://support.apple.com/kb/PH15055
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

  • How I can set ORG_ID context (for Oracle Apps Views) in ODI designer tool?

    Hi All,
    I want to get data from apps views (like OE_ORDER_HEADER_V) into our data warehouse detination table using ‘Oracle Data Integrator’ tool.
    The issue is that when I reverse Oracle Table or Synonym directly, everything works fine i.e. after 'Interface' execution, I can see how many rows imported into destination table from this source Oracle table/synonym.
    But when I use Apps view as a source then 'Interface' executes fine with ‘no error’ but NO rows imports to the destination table.
    I believe, the only difference is that I am not able to set Org_Id before executing ODI interface so it is not picking the data.
    Please let me know the steps/instructions to set org_id context on apps view then reverse in ODI Designer tool.
    Please note that I can set org_id using SQLPlus successfully as given below (and see data using the same Apps view). What to do in ODI designer tool to achieve similar data:
    begin
    fnd_global.apps_initialize(0, 21623, 660);
    mo_global.init('ONT');
    end;
    -- connect using apps/apps at Vision SQLPlus
    -- User_Id -> 0 (<-- SYSADMIN )
    -- Responsibility_Id-> 21623 (<-- Order Management Super User )
    -- Application_id -> 660 (<-- ONT )
    -- select count(*) from oe_order_headers_v where rownum < = 100
    I would appreciate your quick help in this.
    Thanks in advance.

    Set org context in 11i:
    ===============
    The SQL command to set the ORG_ID prior to running a script is:
    SQL> execute dbms_application_info.set_client_info(&org_id);
    Enter the org_id when prompted.
    If using Toad
    Begin
    fnd_client_info.set_org_context(&org_id);
    End;
    Set org context in R12
    ================
    The SQL command to set the ORG_ID prior to running a script is:
    SQL> exec mo_global.init('AR');
    exec mo_global.set_policy_context('S','&org_id');
    Enter the org_id when prompted.
    The procedure - mo_global.set_policy_context has two parameters
    p_access_mode & p_org_id
    p_access_mode Description
    S In case you want your current session to work against Single ORG_ID
    M In case you want your current session to work against multiple ORG_IDs
    p_org_id: Only applicable if p_access_mode is passed value of "S"
    If using Toad
    Begin
    mo_global.set_policy_context(‘S’, &org_id);
    End;

  • Closing the Report Viewer causes the application to hang

    Hi,
    Since a few days we are experiencing some problems with the Crystal Reports viewer. When closing a report viewer in our application, the application hangs for a few minutes. The strange thing is, that it only seems to happen on Windows 7 and Windows 2008 R2 Server.
    Our application with the integrated Crystal Report Viewer is running on 2 application servers :
    - Windows 2008 Server, versie 6.0 Build 6002, Service Pack 2
    - Windows 2008 R2 Server versie 6.1, Build 7600
    Crystal Reports version installed on both servers : 12.01.0007.1144
    On the 2008 Server, the application works correctly.
    On the 2008 R2 server, the application hangs for about 5 minutes while closing the report preview window.
    Both server have exactly the same version of Crystal Reports and the same application version.
    I'm having the same issue on a Windows 7 x64 (6.1 Build 7600).
    I've installed all updates and hotfixes up to SP3 Fix Pack (12.3.3.812 / 12.3.2003.812) but I'm still having the same problem.
    We didn't have this problem until a few days ago, so I assume it has something to do with a windows update which only affects Windows 7 and Windows 2008 R2.
    Please advice us with a possible workaround, because our application is distributed to a few thousand users ...
    Some more debug info :
    This is the call of from the main thread when the application hangs :
         [Managed to Native Transition]     
    >     mscorlib.dll!System.__ComObject.ReleaseSelf() + 0x5 bytes     
         mscorlib.dll!System.Runtime.InteropServices.Marshal.ReleaseComObject(object o) + 0x8b bytes     
         CrystalDecisions.Shared.dll!CrystalDecisions.Shared.SharedUtils.ReleaseComObject(object obj = {CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass}) + 0x75 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ISCDClientDocumentEvents_EventProvider.Dispose(bool bDisposeManaged = true) + 0x1a2 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ISCDClientDocumentEvents_EventProvider.Dispose() + 0x32 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.DisconnectEventRelay() + 0xfc bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.InternalClose(bool bSetupForNextReport = false, bool bAutoClose = true) + 0x10e bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Dispose(bool bDisposeManaged = true) + 0xad bytes     
         System.dll!System.ComponentModel.Component.Dispose() + 0x12 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.ClearCache(bool clearDocument = true) + 0x9d bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.InternalClose(bool bSetupForNextReport = true) + 0x81 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.Close() + 0x3f bytes     
         SyDelSoftControlLibCrystalReports.dll!SyDelSoft.ControlLib.CrystalReports.cReportForm.Dispose(bool disposing = true) + 0x55 bytes     
         SDProjects.exe!SDProjects.GUI.ReportForm.Dispose(bool disposing) + 0x38 bytes     
    SharedUtils.ReleaseComObject
    Kind regards,
    Frederic Hoornaert

    CrystalReportsDisposeIssue.crpe.Diagnostics.0.log
    --> Form3 closed
    ..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:39:17"
    N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:17"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"7"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"6"
    N/A:-1,Closing engine,Elapsed Time,"2"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:17"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"6"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"5"
    N/A:-1,Closing engine,Elapsed Time,"2"
    --> Form2 closed
    ..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:39:52"
    N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:52"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"4"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"3"
    N/A:-1,Closing engine,Elapsed Time,"2"
    --> Form1 closed..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:40:29"
    N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:40:29"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"2"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"1"
    N/A:-1,Closing engine,Elapsed Time,"2"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:40:29"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"1"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"0"
    N/A:-1,Closing engine,Elapsed Time,"100017"
    CrystalReportsDisposeIssue.crpe.functions.0.log
    0xfb8     17:39:17.871          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:22>     IN          21     <==
    0xfb8     17:39:17.871     0     0     PESetUserSessionInfo               0     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:22>          21     <==
    0xfb8     17:39:17.874          3     PEClosePrintJob     report {657D0ECA-BC6A-4EC6-9476-02B77376E07C}.rpt          0     jobN:3     IN          22     <==
    0xfb8     17:39:17.874     36     3     PEClosePrintJob     report {657D0ECA-BC6A-4EC6-9476-02B77376E07C}.rpt          0     OUT     jobN:3          22     <==
    0xfb8     17:39:17.913          0     PECloseEngine               0     void     IN          22     <==
    0xfb8     17:39:17.913     3     0     PECloseEngine               0     OUT     void          22     <==
    0xfb8     17:39:17.923          0     PECloseEngine               0     void     IN          0     <==
    0xfb8     17:39:17.923     3     0     PECloseEngine               0     OUT     void          0     <==
    0xfb8     17:39:52.421          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:23>     IN          0     <==
    0xfb8     17:39:52.421     0     0     PESetUserSessionInfo               1032     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:23>          0     <==
    0xfb8     17:39:52.423          1     PEClosePrintJob     report {F2574C5C-00BC-4627-9A05-B8133D6E6F7D}.rpt          0     jobN:1     IN          0     <==
    0xfb8     17:39:52.423     15     1     PEClosePrintJob     report {F2574C5C-00BC-4627-9A05-B8133D6E6F7D}.rpt          0     OUT     jobN:1          0     <==
    0xfb8     17:39:52.441          0     PECloseEngine               0     void     IN          0     <==
    0xfb8     17:39:52.441     3     0     PECloseEngine               1032     OUT     void          0     <==
    0xfb8     17:40:29.281          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:24>     IN          0     <==
    0xfb8     17:40:29.281     0     0     PESetUserSessionInfo               1032     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:24>          0     <==
    0xfb8     17:40:29.283          2     PEClosePrintJob     report {C78FE11F-6465-478F-83AB-49D8F0C6D64A}.rpt          0     jobN:2     IN          0     <==
    0xfb8     17:40:29.283     24     2     PEClosePrintJob     report {C78FE11F-6465-478F-83AB-49D8F0C6D64A}.rpt          0     OUT     jobN:2          0     <==
    0xfb8     17:40:29.310          0     PECloseEngine               0     void     IN          0     <==
    0xfb8     17:40:29.310     2     0     PECloseEngine               1032     OUT     void          0     <==
    0x1568     17:40:29.315          0     PECloseEngine               0     void     IN          0     <==
    0x1568     17:40:29.315     100018     0     PECloseEngine               0     OUT     void          0     <==

  • Closing the report generating engine automatically

    how can i close the report generating engine after displaying a report automatically ie when closing the report window the report generating engine also need to be closed. now i have to manually close the report background window also and it becomes annoying to users . i am using the rdf files and not rep files.

    There is a parameter ORACLE_SHUTDOWN. Set it to YES.
    When you have large, complex reports, the Reports Background engine sometimes eats lots of memory and leads to GPF. If you have lots of GPF when running a report, you should use this parameter.
    null

  • The second time when i print the report the page appear cut in the right

    hi,
    I created a report in Report Builder 6i. When i print the report appear well, but when i try to print the same report second time in the right of the page appears cut.
    Why? What should I do to appear the entire page at the second print?
    Thx.

    Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
    Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
    So that leaves you with two choices.
    You can either recreate the whole document.
    Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.

  • How to get SYSDATE in the header section dynamically when we run the report

    I have one more issue may i know how can i get the sysdate in the header section when i run the report.
    as we have the requirement like this
    In the header section
    Run Date : ("sysdate").
    How to get the sysdate dynamically in the RTF template, when i go across the google i found that header and footer section did not allow form fiields .
    So is there any way to do it.
    Thanks in Advance.
    Have a Nice Day.

    You cannot insert form fields in the Header section, but you can just insert the code to achieve this. For example: insert this in the header section to view the sysdate: You could format the date as you would like..
    <?xdoxslt: sysdate(‘YYYY-MM-DD’)?>
    Since you are new to BI publisher, search the forum, review the Report Designer's guide for BI publisher. You will find that most of your basic questions are answered there and there are examples as well.
    Thanks!

  • My report is printing half of the page when I print the report Hp psc 1315

    My report is printing half of the page when I print the report in this printer
    Hp psc 1315 all in-one and when the operating system is windows xp , but when
    I run the same report in windows me , and the same printer it is running well
    And my report version is :
    Report Builder 6.0.8.23.0
    ORACLE Server Release 8.0.6.0.0
    Oracle Procedure Builder 6.0.8.20.0
    waiting for your valuable answer .
    Best regards
    Jamil alshaibani

    i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
    please help
    betst regards
    jamil alshaibani

  • How can I make signature darker when I print the report?

    I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
    I used file link and OLE, both did't make it.
    Thanks.

    No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

  • How to change report displayname at runtime when run from the report server?

    hi all,
    with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
            private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
                string po = e.Parameters["Order"].Values[0];
                this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
    question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
    thanks for any tips,
    sff

    Hi sherifffruitfly2,
    According to your description, you want to change the display name of report in Report Manager. Right?
    In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
    ="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
    It will show the report name with execution time when we run the report:
    Reference:
    Built-in Collections in Expressions (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • I am not Getting emails when i schedule the Report.

    Hi All,
    When i Schedule the Report in obiee 11g i am Getting Alerts Successfully but am not getting Mail.
    When i Schedule the Publisher i am getting mails.
    ERROR Details:
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 2 of 3
    AgentID: /users/administrator/Agents/latest test
    [nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
    ...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/administrator/Agents/latest test
    [nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
    ...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /users/administrator/Agents/latest test
    [nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
    ...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /users/administrator/Agents/latest test
    [nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
    Exceeded number of SMTP delivery retries.
    Thanks and Regards
    Kiran Kumar

    Hi All,
    I got the answer and it worked for me:-
    1. If the BI Scheduler cannot ping the mail server specified in the scheduler configuration, check the correct server is specified. If it is, check that it is up and running.
    2. If the user name and password are specified in the scheduler configuration, log in to Enterprise Manager and navigate to:
    Weblogic Domain
    Right click on bifoundation_domain > Security > Credentials
    Expand oracle.bi.enterprise
    Highlight mail.server and delete the user name and password..
    Thanks & regards
    Nitin Aggarwal

  • SAP Query (SQ01) who and when to use the report

    HI Experts!!!
    Is there somewhere recorded information:  who and when to use the report from SAP Query (SQ01)?
    Thanks

    Hi
    This topic doesn´t belong to the Service Marketplace Area.
    regards Martin

  • How to create a file when i run the report

    hi all
    i want to run the report and each time i run the same report to create a separate word file for the report o/p ?
    is there exist a procedure to create a fiel?

    hi magoo thanks for your consederation
    i use forms 10g
    But your answer is to create the file , but when i run the report next time the file overided by the new file ,
    But i want to generate a new file beside the old created file (how can i create separate file althouth the file name take the same name of the report)
    thanks.

  • Bad load arguments supplied when starting up the Reports Server

    Dear All,
    In report60\server\<filename>.ora
    Following were the contents :
    maxconnect=20
    cachedir="d:\Oracle\806\REPORT60\server\cache"
    cachesize=50
    minengine=0
    initengine=0
    maxengine=1
    maxidle=30
    security=1
    englife=50
    We chnaged it to
    maxconnect=20
    cachedir="d:\Oracle\806\REPORT60\server\cache"
    cachesize=50
    minengine=1
    initengine=0
    maxengine=5
    maxidle=30
    security=1
    englife=50
    We imideatly got result we checked it put it on live application server.
    Everything was smooth but next day we got calls/email from user saying report were slow. when we checked the windows process on application server rwmts60 was occuping 50% of memory so we killed that process. We restrarted the report service but was unable to restart.Then we saw the report log as follows :
    *** 2008-07-29 17:36:51 -- Server started up an engine. (Rep60_WEBDB-01)
    *** 2008-07-29 17:36:53 -- Server engine crashed. (Rep60_WEBDB-01)
    *** 2008-07-29 17:38:18 -- Server started up an engine. (Rep60_WEBDB-01)
    *** 2008-07-29 18:39:44 -- Server shutting down an engine. (Rep60_WEBDB-01)
    *** 2008-07-30 09:13:19 -- Server engine cannot be started. (Rep60_WEBDB-01)
    *** 2008-07-30 09:15:24 -- Server engine cannot be started. (Rep60_WEBDB-01)
    *** 2008-07-30 09:17:29 -- Server engine cannot be started. (Rep60_WEBDB-01)
    *** 2008-07-30 09:19:34 -- Server engine cannot be started. (Rep60_WEBDB-01)
    *** Bad load arguments supplied when starting up the Reports Server
    *** Bad load arguments supplied when starting up the Reports Server
    *** Bad load arguments supplied when starting up the Reports Server
    *** Bad load arguments supplied when starting up the Reports Server
    then we changed back our ora file to
    maxconnect=20
    cachedir="d:\Oracle\806\REPORT60\server\cache"
    cachesize=50
    minengine=0
    maxengine=1
    initengine=0
    maxidle=30
    security=1
    englife=50
    And restarted the service which restarted suceesfully.
    My question is i had changed maxengine=5 and minengine=1 on 20- JUL-2008 around 16:00 .Did this happen b'coz of this 2 parameters.
    Kindly advice.
    Thanking You in anticipation.
    Best Regards,
    Devendra

    Hello Mahendraji,
    Thanks for your reply.
    I may ask some basic question please accomodate me.
    <<$RACLE_HOME\reports\conf\apple_report.conf>>
    I have Application server 9i version 1.0.2.0.0 (isuite).
    I have installed in D drive
    In this drive a folder d:\orcale is created.
    Inside of this i don't have any folder called "reports"
    i have folder called "806"
    \\webdb-01\D-Drive\Oracle\806
    Inside of which i have folder "report60"
    \\webdb-01\D-Drive\Oracle\806\REPORT60
    Inside of which i have folder "SERVER"
    \\webdb-01\D-Drive\Oracle\806\REPORT60\SERVER
    In which i found "Rep60_WEBDB-01.ora" , "Rep60_WEBDB-01.log" and "cgicmd.dat"
    and 2 folders "CACHE" and "security".
    I am confused as you said that the file name should be Rep60_WEBDB-01.CONF but i have Rep60_WEBDB-01.ora are they one and the same . If yes is the extension b'coz i have older version of 9i i.e 1.0.2.0.0 (isuite).
    if no where i how i can search this .
    This Rep60_WEBDB-01.ora file doesnot have parameter "engineResponseTimeOut" if i add it will it work.
    Your explanation regarding "engineResponseTimeOut" is clear.
    Maximum Time taken by our report is 20 minutes. But sometimes when report hangs or SQL takes more time than normal due to the environment so the max time might change to 25 or 30 minutes in such a case should we keep it at 45 minutes to avoid any unneccessary termination.
    <<Note:
    It is always better to run batch reports on a separate server with different engineResponseTimeOut values. Do not submit interactive and batch reports to same server.>>
    If i create a seperate application server how can i send reports requested by user to batch in this seperrate server.
    What should be the criteria of report to be redirected to seperate server?
    What do mean by "submit interactive" and "submit batch"
    My interpretation is when we click on submit query button it is "submit interactive" is it correct.
    I am not clear about "submit batch"
    I know there might be some silly questions but please do accomodate.
    Kindly advice.
    Thanks.
    Regards,
    Devendra Shelke

  • Names of columns don't appear when I read the report on WebI 6.5 ??

    Names of columns don't appear when I read the report on WebI 6.5
    The report was developped on BO 6.5 and was published on WebI.
    When I read the report with the HTML mode, the names of the colums appear.
    When I read the report with the PDF mode, the names of the columns don't appear.
    I try to read the report with the HTML mode and after, I try to save it in pdf but it doesn't work. (it is the operation of conversion of pdf which doesn't work - it's very long and... nothing appends)

    Hello,
    This is  the default column. I didnu2019t add column heading. But I replaced the name of the column by words.
    I havenu2019t change the property of column heading.
    It is a cross tab.

  • Whenever I open a new tab a new window is also opening at the same time, and when i close that tab thet window is also closing. what to do?

    Whenever I open a new tab a new window is also opening at the same time, and when i close that tab that window is also closing. what to do?

    Swarnava, thank you very much! that did it and I am Bing-less . . . OH HAPPY DAY!! WOOHOO!!!! thank you, thank you, thank you!

Maybe you are looking for

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color. All other colors and tests I made are ok. I cleared printheads, made all printing tests, and diagnostic pages. In every printing was missing the yellow color.. I changed the y

  • Photoshop CS3 crashes when quitting

    Hello! My Photoshop CS3 started crashing when quitting. I have Windows Vista. When I click [x] to quit, a box appears saying "Adobe Photoshop CS3 has stopped working" with button "close program", and then some problem report thing. At first I tried r

  • IMAC 27 wakes up but without Startup Disk?

    Put iMAC to sleep and it wakes up with normal looking desktop, but nothing activates. Unable to launch apps etc. I shut down, unplug power, then startup with option key, Startup disk displays and I click enter, and all starts up fine.... I select MAC

  • A language question, didn't find answer in spec.

    The question is, if I have a class defined as a private static member of another class, and it extends the outside class at the same time, can it access another private static member in the same class? The sample follows: public abstract class Main {

  • How do I get an acknowledgement receipt for an ema...

    I'm sure you know what I mean but I'm not sure what it's called. The Help section within the BTYahoo mail is as useful as the proverbial chocolate fireguard. Solved! Go to Solution.