When i import from my vidio camera into imovie the clips look tall and thin.tied different imports like full size or large but seem to make no difference everything seems to run ok including sound whats going on?   the m

when i import from my video camera into imovie the clips look tall and thin. tried different imports like full size or large have imported both sd and hd but seem to make no difference everything seems to run ok including sound. whats going on?  

Hi Brad,
when you use Streamclip to convert media, use the same name for the exported file (only with different extension). Then make a shell script calling
touch -r origFileName.mp2 newFileName.mov
This will copy the exact time and date from origFileName.mp2 to newFileName.mov
The script may look like this (save the file, give an exec permission to it and call it in the right directory):
#!/bin/bash
for i in `ls *.mp2`; do
NEWNAME=$(ls "$i" | sed -e 's/mp2/mov/')
touch -r $i $NEWNAME
done
You may need to adapt the extension names used (in the example above .mp2 is input file to get the date/time stamp from and .mov is the output file to stamp.
Have fun and cheers

Similar Messages

  • Import From iPhone 3GS Directly Into iMovie '09?

    I don't think this is possible. Can you import from your iPhone 3GS directly into iMovie '09?
    With my iPhone 3GS docked, if I go to File > Import from Camera… the only device I get is my iMac's iSight camera. Why doesn't the iPhone 3GS show up?
    Yes, I know you can import videos into the Finder using Image Capture. And you can import them into iPhoto and THEN into iMovie. But how come you can't go directly from your iPhone 3GS into iMovie '09?

    You right about the iPhone 3Gs work-flow:
    _ Connect your iPhone 3Gs to your Mac
    _ Launch iPhoto
    _ Import the iPhone 3Gs videos using iPhoto
    _ Launch iMovie
    _ iMovie automatically detects the videos from iPhoto & requests if you want to Generate Thumbnails
    _ Then go to the iMovie > Event Library > iPhoto Videos

  • Files won't import from Nikon D3200 camera into LR5

    I've just installed LR 5.7.1. I have the camera plugged in directly (Nikon D3200). The thumbnails from my camera are available (I've deselected a few of the images that I don't want to import). The default 'Pictures' folder on my hard drive is the selected destination. I click the 'Import' button and the "Importing files..." message appears and just hangs, nothing imports (camera battery dies after a few hours). The "Copy and Import photos" progress bar at the top left doesn't show any progress. Any suggestions?

    * Thank you for the suggestion.
    Additional info: I can not get the images onto my MacBook Pro via Image Capture either. Same situation, the images appear in thumbnail but after I click import nothing happens. However, I am able to get the pictures onto a separate MacBook via Image Capture indicating that there is something wrong with my system or it's settings. Both computers are running OS X Yosemite.

  • Import from DVDxDV created file into imovie HD with scene breaks

    I purchased the DVDxDV program and it is working fine importing files from my Sony mini-dvd handycam. When I import the movie file created by DVDxDV into imovie 08, the program seems to automatically create scene breaks (which I want it to do!) However, I would really prefer to use imovie. When I import the DVDxDV created movie file into imovie HD, it comes in as one big video file. I need many, little clips out of this one big file. Is there a way to either import it through DVDxDV with the original scene breaks? Or can I configure imovie HD to behave like imovie 08 and break this big file up? Any help is really appreciated.

    My guess is you'll see the same artifacts using other applications. I do recommend, however, MPEG Streamclip and Miraizon's Cinematize. Those let you select the portions of a video you want to convert so you save a lot of time and hard drive space.
    Also, recent versions of Toast (I don't know if this is true for Toast 7) can export individual chapters from a video DVD or VIDEO_TS folder as separate files. This is done via the Toast Media Browser. Put the VIDEO_TS folder on the desktop or insert the DVD, choose DVD with the top button of the Media Browser. When the item appears in the browser window use the button beneath "DVD" to access the chapter level. Select the chapters you want and drag them to the Video window with DVD video selected as the format. After Toast extracts the split MPEG files you can select them and export them to other formats. It's possible, though, that Toast 7 doesn't have the ability to access the chapter levels.

  • Import from DVD-RW disc into imovie

    This might be repetitive but I am still unable to download my video off of the DVD-RW disc into imovie. This is for a project so I really need so help on this problem. Thanks again!

    Hi
    Native Apple Mac can't do it. You need a program to back-code to streamingDV.
    I use: Roxio Toast™ to do this
    alt. Copy DVD from player to Camera and use this.
    Yours Bengt W

  • When i cropped a picture using the crop tool to 9x6" when it was printed everyone was stretched looking tall and thiner how can i crop pictures but keep the people looking as they do in real life?

    oops put the while question in the wrong place!!!  but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
    I have PS6
    thank you

    suzukidi wrote:
    I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the  point where I'm doing something that causes the stretching? thank you for your patience
    Lets separate this into topics  Aspect Ratio,  resolution and size ... etc
    Aspect  Ratio is just the ratio of an image's two sides.    Your camera captures an image with a 3:2 Aspect Ratio.   If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
    Images are re-sized two ways:
    One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size.  Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves.  These days most devices use square pixel.  Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4"  if you set the  to 200DPI the print size will be 9" by 6".  Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch  100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
    The other way is to create a new image using the pixels you camera captures.  Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image.  There are different interpolation methods some work better then others depending on image content and the direction of the re-size.  Any time you resample an image you loose some image quality.  The pixels are generated they are not captured using optics and a sensor.
    Normally I do not resample when printing I just set the DPI so the image prints the size I want.  In the Image size Dialog I un-check resample and the set the print width or height I want to print.  Photoshop will calculate the DPI and set the other side size.    If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
    I resample image for the web Cameras capture more pixels then can be display by displays.  So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has.  Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
    If you want to print you image a size that does not have a 3:2 aspect ratio without distortion  you need to crop you image to the aspect ratio you want to print at.  You need to discard part of your image.  The Crop Tool does not distort it discards part of you image.  It may or may not resample the crop selected.  I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
    Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize.  The resulting image will be distorted.  However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process.  This process can also be aided by user masking.
    Cropping:
    A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio.  All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image

  • Can't import from Canon Optura 10 into iMovie

    I just bought a MacBook Pro 15 inch specifically for making/editing movies. I connected a 9pin-4pin DV Firewire Cable to my Canon Optura 10 (set in Play/VCR mode). The other end of the cable was connected to the Firewire port on the MacBook Pro. I opened up iMovie. Nothing pops out. I tried importing but only the MacBook Pro's built-in camera pops out.
    The DV Firewire Cable I'm using is one year old. I never used it until now. Since I bought it (1 year ago), it's been stored safely in its package. It has a lifetime warranty.
    Can someone please suggest or help me? Thanks. I am very disappointed right now because I bought this MacBook Pro for only one reason --- to edit my movies --- and that doesn't seem to work so far.

    Hi
    May be You find help in my list.
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • Why is there no audio when I upload from Canon Video cam to imovie?

    When I attempt to ulpoad from my Canon Elura 90 to imovie, the video is there but not the audio. Have imovie 9.0.4 and Mac os 10.6.8

    I had the same problem a long time ago. I don't remember it for sure but I guess it had something to do with the bit numbers of the camcorder (the audio setting in this respect).(it was solved with posting it on a Mac website)

  • When I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album.  what am I doing wrong?are

    when I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album.  what am I doing wrong?are

    Is iPhoto open when you connect the camera and are you seeing the camera in iPhoto? 
    If not then describe in detail how you're going about trying to import photos from your Samsung camer into your iPhoto Library.  From what you've described we have no idea what's going on.
    And where is this "import" folder located that you're referring to?
    OT

  • I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

    I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

    Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
    Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
    Thank you @dj_paige

  • While importing from my digital camera (Olympus XZ-2), iMovies quits, WHile importgin from my digital camera (Olympus XZ-2), iMovies quits

    While importing from my digital camera (Olympus XZ-2), it "unexpectedly quits" - seems to happen on slightly larger clips (over 90 seconds) - not sure if it is related to the model camera or iMovie 11'. Any advice?

    Lion is 10.7, Snow Lepoard is 10.6, Leopard is 10.5.
    I woul strongly recomend you update to 10.6.8 (the last snow lepoard update) for a number of reasons. First 10.6.8. is a solid OS at this point you won't have to many (or any) gotcha's. Second Leopard (10.5.x) is going away. Pretty sure there will be no more updates for it at this point. If not it won't be long before that happens. Also you will need to have 10.6.8 installed in the event you want to at some point upgrade to Lion.
    But finally perhaps the most important point if you don't have 10.6.8 you can't acess the App Store and if you can;t acess the App Store you will need to get the boxed version of Aperture 3. The differerence in price between the boxed version and the App Store version will more then pay for the upgrade to Snow Leopard. In fact you should have  a fair bit of change left over.
    good luck

  • MPEG2 imported from Sonny HDD camera yeilds poor quality. Is this normal?

    I'm still struggling with iMovie and my new Sonny HDD, DCR-S200. It records to an MPEG2 format. When I import video clips from the camera into iMovie and then view the results, the scenes seem to be missing frames. The playback is not smooth. As the scroll bar is jerky (brief pauses) when it travels over the frames it's playing. The movies are also not smooth, but jerky (brief pauses). The sound is fine.Is this the best I can expect? Is the problem with MPEG2 compatibility with iMovie?
    Any suggestions or advice?

    Your PowerPC G5 is at the very bottom end of machines capable of running iMovie.
    Have you tried rendering your project? Is the final shared project also poor? It should be fine, because in the process of rendering, it will go as slow as it needs to, but make every calculation.
    See this link for iLife System Requirements. iMovie needs minimum G5 with 1.9Ghz or faster
    http://www.apple.com/ilife/systemrequirements.html
    Message was edited by: AppleMan1958

  • I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    Non-destructive editing is an important feature of iMovie HD 6.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • Iation.  When I import it to iMovie 6.0.3 the clip is on its side.  How do I rotate it 90% .  You ten have to turn your head sideways to view it !  How can I rotate the orientation?

    I've imported a QTPmovie 10.03 from my iphone4 in portait orientation.
    When I import it to iMovie 6.0.3 the clip is on its side.  How do I rotate it 90% .  You then have to turn your head sideways to view it !  How can I rotate the orientation in imovie 6.0.3?

    Klaus
    Unfortunately, I did not have any success with this.
    These pages were " not found"
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169
    and
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    only opened in  http://www.apple.com/
    - it kept deleting /downloads/macosx/video/mpegstreamclip.html .
    However, I googled and found http://tips4mac.blogspot.co.uk/2007/08/rotating-clip-in-imovie-06.html this really helpful..and it worked !
    regards
    BKDB

  • FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

    Please help ASAP.
    Specs: IOS 10.6.8
    Processor 2.4GHz Intel Core i5
    Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
    Editing with FCP 7
    When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
    The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
    How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
    This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
    Thanks,
    MV

    What is your source material? Is it H.264? FCP does not work correctly with that material.
    Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
    Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
    MtD

Maybe you are looking for

  • Issue with Datasource

    Hello BI Guru's I have standard 3.x data source which is using currently in production system. As per new requirement i have  enhanced the data source with new fieldas and existing data source using most of the fields,but for my requirement i need at

  • How do i connect my ipod to a new computer without losing the songs on my..

    I bought a new computer and I've installed itunes on it. I want to transfer all the songs on my ipod to itunes on my new computer. How can i do this without losing the songs on my ipod? Can anyone help me?

  • Warp Stabilizer through After Effects Dynamic Link Locks up in CS6

    Hey Gang, I've been using Warp Stabilizer through dynamic link in CS5.5 without issues.  However, when I go through dynamic link into AE, then apply Warp Stabilizer, AE locks up? I can apply any other effects through this path in AE without issue, bu

  • Packagin and Deploying Fusion Web Application

    Hi, I have created a Fusion web application which has Model and ViewController projects. I have created a deployment profiles as below for each project. 1) Model - Which creates an "ADF Library Jar File" 2) ViewController - Which creates a "War" file

  • Consumer tree in replication process

    Is their any way to stop the consumer to make referal to supplier ,if any new branch is created on consumer. As per my understand , There should be only one master and server consumers. If any thing added on consumer , but not in supplier , it will g