When I plug my Droid Incredible 2 into a car charger the phone is now permanently in"Car Mode" and won't get out. I heard that Droid will fix this, but it hasn't happened.  Does anyone know how to fix i

I have a Droid Incredible 2 phone.  I bought  car charger and ever since I have used it, the phone thinks it is in "car mode" even when the phone is in my home, my purse,...I sets to speaker and I can not hear the phone ring.  It freezes on "car mode".  I heard that Droid is supposed to be fixing the problem, but nothing has happened yet.  Is anyone else having this problem, and does anyone at Verizon know when/if this will be fixed.  If not, I expect a new phone from Verizon.

there are two ways, usually if u restart the phone it will reset, but the other is going to your system and shut it off manually...

Similar Messages

  • I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

    I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

    You are seeing the message because the new AirPort Extreme has some specific System Requirements:
    http://www.apple.com/airport-extreme/specs/
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
    If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme.

  • I don't know of there is anyone than can fix this age old Apple problem.   Does anyone know how to retrieve things under an old Apple ID when the email used for that account no longer exists? I am trying to update a number of apps that was bought under an

    I don't know of there is anyone than can fix this age old Apple problem.   Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
    Any updated way to work around this? No Apple people can correct it.
    Thanks,
    Joe

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • When launching PS I get an error 150:30 "licensing for this product has stopped working".  Does anyone know how to fix this?

    When launching PS I get an error 150:30 "licensing for this product has stopped working".  Does anyone know how to fix this? downloaded very recently from Creative Cloud

    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • I have installed mountaion lion and I am getting an error 150:30 that prevents me from opening my photoshop cs4 extended. Does anyone know how to fix this?

    I have installed mountaion lion and I am getting an error 150:30 that prevents me from opening my photoshop cs4 extended. Does anyone know how to fix this?
    Thanks

    It's a "licensing error" see this for what steps to take: Error "Licensing has stopped working"  | Mac OS

  • My iPhone will ring but not play music. Does anyone know how to fix this problem?

    My iPhone will ring but not play music. Does anyone know how to fix this problem?

    Clean iPhone charging port with clean dry toothbrush. See if fixed. If not, and if there is Warranty or AppleCare make Genius reservation or set up service and take or send to Apple. If no coverage, clean again with toothbrush and small amount of Isopropyl Alcohol.

  • HELP! How come I can't 'save and quit' any longer with this new ver of Firefox? Does anyone know how to fix this?

    When I updated Firefox I have now discovered I can no longer action the 'save and quit' function when closing down Firefox! Is this a common problem and more to the point is there a solution to this?? ie, change settings or some form of patch??
    Any help would be greatly appreciated as this function WAS awesome when needing certain tabs kept open.

    Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
    If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
    # Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
    If you always open the last set of tabs, an alternative approach is this:
    # Click the orange Firefox button, then select options to open the options window
    # Go to the General panel
    # Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

  • I plug my iPhone 3gs into my laptop and it no longer syncs with my iTunes.  Ive tried all the trouble shooting methods and nothing works.  My iPhone doesnt appear on iTunes or under "my computer." Does anyone know how to fix this?

    I plug my iphone 3gs into my laptop and it no longer syncs with my iTunes.  I've tried all the trouble shooting methods and nothing works.  My iPhone doesn't appear on iTunes or under "My Computer." Does anyone know how to fix this?

    If AMDS is running, you are using a USB port directly on the computer and not a hub, you have disconnected other USB devices except keyboard and mouse, you have completely uninstalled and reinstalled iTunes as described in http://support.apple.com/kb/HT1925, You have tried cleaning the connector on the bottom of the phone, you have tried a different cable, you have installed the latest USB drivers for your computer, you have disabled your antivirus and firewall, you are running as an Administrator account and you have tried creating a new user on your computer and connected when logged in as that user then you have exhausted my knowledge. The only other thing to try is a different computer. If it isn't recognized on a different computer you have a hardware problem. Good luck!

  • HT1430 my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol. my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?

    my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol, my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?

    Glitchs like that sometimes happen
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If sit still reocurrs a lot, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

    my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

    If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
    **Imediately backup ALL your important data while you can still see things on the monitor
    Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
    nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
    perform SMC reset just to check:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?

    We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?
    This is the message box content we get when trying to open Word:
    Process:         Microsoft Word [309]
    Path:            /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
    Identifier:      com.microsoft.Word
    Version:         ??? (???)
    Build Info:      Unknown-101117~0
    Code Type:       X86 (Native)
    Parent Process:  launchd [109]
    Date/Time:       2011-06-14 05:34:15.752 -0400
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Sleep/Wake UUID: FDFC3F45-E8C8-4D18-A0C4-EA3C76AD2547
    Interval Since Last Report:          11753 sec
    Crashes Since Last Report:           14
    Per-App Crashes Since Last Report:   12
    Anonymous UUID:                      DDF6AE0D-E118-4768-9B04-8CDCB6D7C62E
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
      Referenced from: /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld

    You will need to contact Microsoft for a fix.  They also have a message board.  Post there if you cannot find an answer after searching their message boards. 
     

  • When i pug my iphone into my computer to charge it the apple shows up and just keep blinking. Does anyone know how to fix it?

    When i pug my iphone into my computer to charge it the apple shows up and just keep blinking. Does anyone know how to fix it?

    Hello Lorraine,
    Thank you for contacting Apple Support Communities. You might try the steps in the following article regarding iPhone battery charging:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Specifically:
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Regards,
    Jeff D.

  • Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

    Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Report any errors it found for Disk Repair, don't need the ones for Permissions Repair.
    Try it again & see if anything changed, but have Activity Monitor open & Show All Processes & sorted on CPU%, also have Console open if we can... maybe not when switching, but we'll see.
    Does this happen if you just try to create a new admin user???

  • Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

    Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

Maybe you are looking for

  • How to restore files from an erased hard drive?

    hi I recently got infected with a trojan, and after updating my mac was told ive also picked up malware software. I moved everything i needed to my hard drive and wiped and reloaded my mac. i then checked my time machine backups on my hard drive and

  • BW infocube enhancement

    HI all Can anyone could tell me the types of enhancement could be done the infocube. like adding new keyfigure, new characteristic.. etc.. thanks and regards arul

  • Re:"encountered Problem and Must close"- MUSIC STORE

    When I try to search music store, my itunes close w/ a box that says "encountered a problem and must close"... I can get around the site normally, and all else seems well... The error message sends "quicktime.qt" file... Any Ideas???? Jane

  • Updating UI in Swing Applet

    Hi, Has anyone idea how can I dynamically add checkBox in an applet? Currently I am dispalying one TextBox in an applet and I want the same text to appear as a text box name when I click on button.. I tried adding code in PaintComponent method but it

  • How to store and use coordinates

    I need to store 2d coordinates and use them in solving equations and pass them into methods. For example, I need to store the coordinates of a corner of a rectangle (5,10). Then I need to use that point and solve for certain variables in a equation (