When I try to create some onglet, FF just, and tell me "some probleme with one page". Sur, but it's with all the site.

When I open FF, it's okay. I can go in internet. But if I try to open more one onglet, FF deconected. I thing it's a virus, but the scan has found nothing. I charged FF 3.8, but the probleme is more here.
== URL of affected sites ==
http://

If a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Similar Messages

  • When I try to order a book in iPhoto it says I have empty frames on pages. But I don't. Any advice on how to correct this so I can order this book? Thanks.

    When I try to order a book in iPhoto it says I have empty frames on pages. But I don't. Any advice on how to correct this so I can order this book? Thanks.

    You do have one or more empty photo frames. Most often it will be a full page photo page missing behind a placed full page photo. To find it you need to go through you'd book and look behind each full page photo
    LN

  • Why is Encore 6.0 giving me the "blue screen of death" when I try to create a menu?

    When I purchased my student edition 6.0 (which I love by the way), Encore did not have any of the libraries loaded up on it. After reading some discussions, I downloaded the missing folders.
    Now, when I try to create a menu, my computer shuts down and gives me "the blue screen of death" as they call it (a blue screen with white writting, counting up to 100%, and saying Windows is preparing to crash...or something about the hard drive crashing....I can't remember because it goes off the screen so quickly).
    I've done this several times - my computer only does this when I try to create a menu in encore, and not in any other part of encore. It hasn't happened in any of the other programs either (Premiere Pro and Audition are the only other programs I have used so far), or any other times I have my laptop.
    Because of this, I am not too concerned since it seems Encore is the problem. However, I do not want any other problems to escalade from this either.
    Am I doing something wrong? Can someone please help me? I'm working on my Senior Thesis (a video) this year, and I really really cannot afford to have my computer crash on me.
    Please and thank you,
    Meghin

    Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169
    -and an Encore fix http://forums.adobe.com/thread/1060443

  • Error message when I try to convert pdf to excel, after three attempts I could only convert one file.

    Error message when I try to convert pdf to excel, after three attempts I could only convert one file.

    Hi pdf to excel,
    What is the error that you're receiving when you try to convert? Is it the "Conversion Failure" message? Can you tell me more about the files you're unable to convert? What application created the PDFs? Are there many pages in these these files, or a complex mix of text and graphics?
    It'll also be helpful to know whether you're converting via the ExportPDF website (and what browser you're using), or through Adobe Reader.
    I look forward to hearing back from you, so we can get to the bottom of this!
    Best,
    Sara

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

    FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

    Hello Sheila,
    Thank you for the details of the issue you are experiencing with FaceTime.  It sounds like your Apple ID password is not being recognized. 
    You can reset your password using the steps in the following article:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    You can contact the Account Security team if you are unable to reset your password using those steps:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • When I try to create a new Message on my Mac, Messages does not bring up my Contacts

    I have followed the instructions to setup Messages, I can send messages to the email addresses that I have memorized, but when I try to create a new Message on my Mac, Messages does not bring up my Contacts when I type in the search field for a person that has an iPad or iPhone.
    This sems out of sorts for an Apple product. Their stuff normally just works.
    For some reason, My Mac Mini with Mountain Lion doesn't recognize my contact names, or it isn't synched with my contacts...
    Anybody else want to weigh in, please?
    Thank you!

    Hi,
    I would point out that I did say...
    Of course the Contacts List has to have people listed in it.
    The Error seems to be that you have not even got an My Card.
    The OS when the computer is brand new and you set up the first Admin Account should create at least once Card entry for the Address Book/Contacts which has the Head and Shoulders icon (the My Card)
    The does presume the the first account on the Mac doers have a person's First name and Last name to work with.
    Of course not everyone sets things up this way.
    Anyhow
    To Check the Contacts List open the app.
    Go to the Preferences.
    Go to the Accounts section.
    This should list at least two "accounts
    One is for Syncing with iCloud and the other is for storing the Info on the Mac itself
    In System Preferences > iCloud you can only set up one Apple ID to be the iCloud ID.
    If you do or have changed this you may have extra accounts in the Contacts > Preferences > Accounts
    Uploaded with Skitch!
    7:36 PM      Thursday; September 6, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do i fix the Error 26073 when i try to creater an installer for my applicati

    When i try to create a Labview V6.1 installer for my application i get the error
    Error26073 occured at Build application.vi>>Dist call Create Installer.vi>>Win Install Create.vi>>Win Install Add files.vi>>MSI DK Add shortcut.vi
    the possible reason listed is   NMDK_AS_BAD_SHORTCUT_NAME
    I have heaps of disk space free
    THe installer worked fine a few months ago

    Hi Rambo,
    Thank you for contacting National Instruments.  From the information you have provided here, its sounds like a couple of different things can be causing this issue.  In looking at some previous instances where this error code was reported when using the application builder, it would be worthwhile to look at the file name field and the location the VIs are saved. 
    Take a look at the field where the file name is provided and ensure only the name is in this location.  By this I mean that the file path and name aren't both concatenated and entered here.
    Also, if the VIs are saved in the user library or the vi library see if it makes any difference if they are moved to another directory. 
    I hope this helps!  If not, any other possible information that you have or may come upon would definitely be helpful.  Have a great day!
    Jason W.
    National Instruments
    Applications Engineer

  • Any limitation when you try to create a sdo_geometry in the fly?

    I was trying to use sdo_relate to find the IDs of the lines(geodetic data) in the database by contructing a long line with long/lat values, and spatially relate it with those lines in database. There are about 400 points that make that long route(I'm sure that it's a valid line). The interesting thing is that if I only use small portion of it(let's say, the first 40 points of that line), and use those long/lat value to build the sdo_geometry in my query, it worked, and returned me some IDs. However, if I use the whole line to do that(the SQL query is exactly the same except I have MORE values for the SDO_ORDINATE_ARRAY parameter. and this time it returned nothing????? The following is the query that I used the first small part of the line. I'm really confused here. Any limit on contructing a sdo_geometry in the fly? actually I had a similar problem when I tried to contruct a polygon sdo_geometry by using the points value that make a MSA area(which usually is a long list of points value), it failed, but the same query worked for less points that makes a polygon. I could get around with that problem. But for this, I have to work it out.Any idea about how to get around with it?
    The following query only have the first part of the line, and it worked! but not if I put the whole long line data there!!!
    select ID from MIAMI_AREA_LONG where sdo_relate(geoloc, mdsys.sdo_geometry(2002,8265,NULL,mdsys.sdo_elem_info_array(1, 2, 1),mdsys.sdo_ordinate_array(-80.34217071533203,25.76181411743164,-80.3421655,25.7615084,-80.3421655,25.7615084,-80.340347,25.761539,-80.340347,25.761539,-80.332611,25.761629,-80.332611,25.761629,-80.324547,25.7618009,-80.324547,25.7618009,-80.321007,25.76193,-80.321007,25.76193,-80.320374,25.761959,-80.320374,25.761959,-80.3186489,25.762051,-80.3186489,25.762051,-80.317002,25.7621499,-80.317002,25.7621499,-80.3162229,25.76222,-80.3162229,25.76222,-80.315803,25.76222,-80.315803,25.76222,-80.310852,25.762409,-80.310852,25.762409,-80.303726,25.762659,-80.303726,25.762659,-80.296356,25.76292,-80.296356,25.76292,-80.288299,25.7630899,-80.288299,25.7630899,-80.279953,25.763439,-80.279953,25.763439,-80.277801,25.763519,-80.277801,25.763519,-80.271446,25.763701,-80.271446,25.763701,-80.263413,25.76404,-80.263413,25.76404,-80.255081,25.764219,-80.255081,25.764219,-80.249946,25.764481,-80.249946,25.764481,-80.248383,25.764481,-80.248383,25.764481,-80.247704,25.764481,-80.247704,25.764481,-80.24527,25.764561,-80.24527,25.764561,-80.241463,25.76474,-80.241463,25.76474,-80.239029,25.76474,-80.239029,25.76474,-80.238983,25.76474,-80.238983,25.76474,-80.238297,25.764771,-80.238297,25.764771,-80.23764,25.7654299,-80.23764,25.7654299,-80.23729,25.76569,-80.23729,25.76569,-80.234177,25.76585,-80.234177,25.76585,-80.230957,25.766041,-80.230957,25.766041,-80.2268069,25.766041)),'mask=overlapbdydisjoint querytype=window') = 'TRUE'
    Thanks!
    Tim

    Hi Dan,
    The following is the one that failed, the difference between this and the last one worked is this the whole line, while the one above is just first part of this long line. Actually it didnot give any error, but just did not return anything. It doesnot make sense because I am using a longer line now, while it returned something if I just use part of it. Thanks a lot!
    I had a similar limitation problem when I try to create a SDO_GEOMETRY with the points I got from a MSA polygon by using the SDO API.
    I'm using Oracle 9i and it reside at window 2000 platform. BTW, when is the spatial patch coming out?
    select ID from MIAMI_AREA_LONG where sdo_relate(geoloc, mdsys.sdo_geometry(2002,8265,NULL,mdsys.sdo_elem_info_array(1, 2, 1),mdsys.sdo_ordinate_array(-80.34217071533203,25.76181411743164,-80.3421655,25.7615084,-80.3421655,25.7615084,-80.340347,25.761539,-80.340347,25.761539,-80.332611,25.761629,-80.332611,25.761629,-80.324547,25.7618009,-80.324547,25.7618009,-80.321007,25.76193,-80.321007,25.76193,-80.320374,25.761959,-80.320374,25.761959,-80.3186489,25.762051,-80.3186489,25.762051,-80.317002,25.7621499,-80.317002,25.7621499,-80.3162229,25.76222,-80.3162229,25.76222,-80.315803,25.76222,-80.315803,25.76222,-80.310852,25.762409,-80.310852,25.762409,-80.303726,25.762659,-80.303726,25.762659,-80.296356,25.76292,-80.296356,25.76292,-80.288299,25.7630899,-80.288299,25.7630899,-80.279953,25.763439,-80.279953,25.763439,-80.277801,25.763519,-80.277801,25.763519,-80.271446,25.763701,-80.271446,25.763701,-80.263413,25.76404,-80.263413,25.76404,-80.255081,25.764219,-80.255081,25.764219,-80.249946,25.764481,-80.249946,25.764481,-80.248383,25.764481,-80.248383,25.764481,-80.247704,25.764481,-80.247704,25.764481,-80.24527,25.764561,-80.24527,25.764561,-80.241463,25.76474,-80.241463,25.76474,-80.239029,25.76474,-80.239029,25.76474,-80.238983,25.76474,-80.238983,25.76474,-80.238297,25.764771,-80.238297,25.764771,-80.23764,25.7654299,-80.23764,25.7654299,-80.23729,25.76569,-80.23729,25.76569,-80.234177,25.76585,-80.234177,25.76585,-80.230957,25.766041,-80.230957,25.766041,-80.2268069,25.766041,-80.2268069,25.766041,-80.222717,25.766109,-80.222717,25.766109,-80.2195969,25.766199,-80.2195969,25.766199,-80.214569,25.766371,-80.214569,25.766371,-80.2114409,25.76646,-80.2114409,25.76646,-80.207703,25.7665599,-80.207703,25.7665599,-80.202682,25.76672,-80.202682,25.76672,-80.200653,25.766781,-80.200653,25.766781,-80.200363,25.768009,-80.200363,25.768009,-80.200027,25.769131,-80.200027,25.769131,-80.199768,25.77026,-80.199768,25.77026,-80.1996,25.77072,-80.1996,25.77072,-80.199417,25.7711599,-80.199417,25.7711599,-80.200027,25.7732199,-80.200027,25.7732199,-80.200104,25.77634,-80.200104,25.77634,-80.200287,25.778589,-80.200287,25.778589,-80.200493,25.78067,-80.200493,25.78067,-80.201134,25.78252,-80.201134,25.78252,-80.202133,25.78413,-80.202133,25.78413,-80.203506,25.787081,-80.203506,25.787081,-80.204163,25.788469,-80.204163,25.788469,-80.205147,25.790529,-80.205147,25.790529,-80.205933,25.79591,-80.205933,25.79591,-80.206307,25.80196,-80.206307,25.80196,-80.20668,25.809231,-80.20668,25.809231,-80.20668,25.809389,-80.20668,25.809389,-80.206573,25.812071,-80.206573,25.812071,-80.206512,25.813629,-80.206512,25.813629,-80.206627,25.8182389,-80.206627,25.8182389,-80.2070619,25.8251,-80.2070619,25.8251,-80.206207,25.830151,-80.206207,25.830151,-80.206284,25.83301,-80.206284,25.83301,-80.206307,25.83536,-80.206307,25.83536,-80.206467,25.838181,-80.206467,25.838181,-80.206512,25.841261,-80.206512,25.841261,-80.206863,25.843189,-80.206863,25.843189,-80.208153,25.846741,-80.208153,25.846741,-80.208389,25.852449,-80.208389,25.852449,-80.208511,25.857861,-80.208511,25.857861,-80.208794,25.86475,-80.208794,25.86475,-80.209007,25.868769,-80.209007,25.868769,-80.209053,25.869551,-80.209053,25.869551,-80.209579,25.876141,-80.209579,25.876141,-80.209427,25.877729,-80.209427,25.877729,-80.209396,25.881929,-80.209396,25.881929,-80.209557,25.88719,-80.209557,25.88719,-80.209824,25.892879,-80.209824,25.892879,-80.210213,25.898029,-80.210213,25.898029,-80.210213,25.901569,-80.210213,25.901569,-80.210213,25.90596,-80.210213,25.90596,-80.210213,25.91148,-80.210213,25.91148,-80.210587,25.916759,-80.210587,25.916759,-80.210587,25.92079,-80.210587,25.92079,-80.210953,25.921801,-80.210953,25.921801,-80.210953,25.92268,-80.210953,25.92268,-80.210213,25.923929,-80.210213,25.923929,-80.20932,25.92482,-80.20932,25.92482,-80.208946,25.925199,-80.208946,25.925199,-80.207581,25.926451,-80.207581,25.926451,-80.207718,25.92651,-80.207718,25.92651,-80.207977,25.926701,-80.207977,25.926701,-80.208237,25.92696,-80.208237,25.92696,-80.208588,25.927311,-80.208588,25.927311,-80.20903,25.927731,-80.20903,25.927731,-80.209534,25.9281599,-80.209534,25.9281599,-80.210747,25.929461,-80.210747,25.929461,-80.211197,25.929899,-80.211197,25.929899,-80.2118069,25.93051,-80.2118069,25.93051,-80.212227,25.9308489,-80.212227,25.9308489,-80.212593,25.9312,-80.212593,25.9312,-80.213013,25.931629,-80.213013,25.931629,-80.213623,25.93224,-80.213623,25.93224,-80.2142329,25.9328499,-80.2142329,25.9328499,-80.214752,25.933359,-80.214752,25.933359,-80.215271,25.9338799,-80.215271,25.9338799,-80.216049,25.934589,-80.216049,25.934589,-80.2163999,25.934839,-80.2163999,25.934839,-80.216659,25.935101,-80.216659,25.935101,-80.217163,25.935619,-80.217163,25.935619,-80.217507,25.93597,-80.217507,25.93597,-80.217957,25.936489,-80.217957,25.936489,-80.2185669,25.937099,-80.2185669,25.937099,-80.219254,25.93779,-80.219254,25.93779,-80.221161,25.939619,-80.221161,25.939619,-80.222992,25.941441,-80.222992,25.941441,-80.223862,25.942381,-80.223862,25.942381,-80.2246399,25.94334,-80.2246399,25.94334,-80.225418,25.94421,-80.225418,25.94421,-80.226097,25.945431,-80.226097,25.945431,-80.226723,25.9463009,-80.226723,25.9463009,-80.227226,25.94734,-80.227226,25.94734,-80.227753,25.94846,-80.227753,25.94846,-80.228287,25.94994,-80.228287,25.94994,-80.228623,25.951229,-80.228623,25.951229,-80.228973,25.952971,-80.228973,25.952971,-80.229141,25.9541,-80.229141,25.9541,-80.229141,25.95558,-80.229141,25.95558,-80.2292329,25.957399,-80.2292329,25.957399,-80.229317,25.95982,-80.229317,25.95982,-80.229507,25.96278,-80.229507,25.96278,-80.229584,25.96538,-80.229584,25.96538,-80.229752,25.97006,-80.229752,25.97006,-80.2298129,25.971371,-80.2298129,25.971371,-80.229843,25.9718,-80.229843,25.9718,-80.229851,25.971907,-80.229851,25.971907,-80.229919,25.973881,-80.229919,25.973881,-80.229927,25.97397,-80.229927,25.97397,-80.230103,25.978041,-80.230103,25.978041,-80.230186,25.97978,-80.230186,25.97978,-80.23027,25.98238,-80.23027,25.98238,-80.230011,25.984119,-80.230011,25.984119,-80.229683,25.985689,-80.229683,25.985689,-80.229317,25.98698,-80.229317,25.98698,-80.228973,25.98802,-80.228973,25.98802,-80.228554,25.989059,-80.228554,25.989059,-80.227943,25.9902799,-80.227943,25.9902799,-80.227333,25.99123,-80.227333,25.99123,-80.226547,25.992359,-80.226547,25.992359,-80.225418,25.993839,-80.225418,25.993839,-80.224289,25.994961,-80.224289,25.994961,-80.222382,25.99687,-80.222382,25.99687,-80.2195969,25.999559,-80.2195969,25.999559,-80.21701,26.002331,-80.21701,26.002331,-80.21579,26.00407,-80.21579,26.00407,-80.215012,26.005369,-80.215012,26.005369,-80.214661,26.006241,-80.214661,26.006241,-80.214142,26.00728,-80.214142,26.00728,-80.213882,26.00815,-80.213882,26.00815,-80.213531,26.009279,-80.213531,26.009279,-80.213493,26.00946,-80.213493,26.00946,-80.2132869,26.01022,-80.2132869,26.01022,-80.213097,26.011869,-80.213097,26.011869,-80.213013,26.01335,-80.213013,26.01335,-80.213013,26.01474,-80.213013,26.01474,-80.2132029,26.0182,-80.2132029,26.0182,-80.213463,26.023331,-80.213463,26.023331,-80.213623,26.02766,-80.213623,26.02766,-80.213707,26.031481,-80.213707,26.031481,-80.213814,26.034611,-80.213814,26.034611,-80.213882,26.035391,-80.213882,26.035391,-80.213966,26.03635,-80.213966,26.03635,-80.214142,26.03755,-80.214142,26.03755,-80.214317,26.0392,-80.214317,26.0392,-80.214577,26.042139,-80.214577,26.042139,-80.214767,26.04414,-80.214767,26.04414,-80.21492,26.0463099,-80.21492,26.0463099,-80.215103,26.04987,-80.215103,26.04987,-80.215271,26.053511,-80.215271,26.053511,-80.215447,26.05827,-80.215447,26.05827,-80.215622,26.062189,-80.215622,26.062189,-80.2157129,26.0668599,-80.2157129,26.0668599,-80.215881,26.07147,-80.215881,26.07147,-80.216049,26.076229,-80.216049,26.076229,-80.2161409,26.0796199,-80.2161409,26.0796199,-80.216232,26.082491,-80.216232,26.082491,-80.2163999,26.0863,-80.2163999,26.0863,-80.216583,26.09012,-80.216583,26.09012,-80.216614,26.09038,-80.216614,26.09038,-80.214213,26.091271,-80.214213,26.091271,-80.212619,26.090851,-80.212619,26.090851,-80.211955,26.090623,-80.211955,26.090623,-80.211055,26.090272,-80.211055,26.090272,-80.210063,26.089842,-80.210063,26.089842,-80.209056,26.089383,-80.209056,26.089383,-80.20721,26.088421,-80.20721,26.088421,-80.205332,26.087412,-80.205332,26.087412,-80.204173,26.086802,-80.204173,26.086802,-80.203242,26.086362,-80.203242,26.086362,-80.202669,26.086055,-80.202669,26.086055,-80.2021199,26.085826,-80.2021199,26.085826,-80.2014559,26.085595,-80.2014559,26.085595,-80.201036,26.085452,-80.201036,26.085452,-80.2002119,26.085263,-80.2002119,26.085263,-80.199121,26.085033,-80.199121,26.085033,-80.198328,26.084912,-80.198328,26.084912,-80.197672,26.084853,-80.197672,26.084853,-80.196947,26.0848039,-80.196947,26.0848039,-80.1960919,26.084792,-80.1960919,26.084792,-80.1952529,26.0848039,-80.1952529,26.0848039,-80.194155,26.0848039,-80.194155,26.0848039,-80.189112,26.084844,-80.189112,26.084844,-80.184671,26.0847729,-80.184671,26.0847729,-80.1801009,26.084533,-80.1801009,26.084533,-80.176912,26.084422,-80.176912,26.084422,-80.175096,26.083972,-80.175096,26.083972,-80.172197,26.083223,-80.172197,26.083223,-80.1712639,26.083015,-80.1712639,26.083015,-80.168663,26.081181,-80.168663,26.081181,-80.164663,26.082414,-80.164663,26.082414,-80.164709,26.084285,-80.164709,26.084285,-80.164694,26.084625,-80.164694,26.084625,-80.164694,26.084976,-80.164694,26.084976,-80.164663,26.085386,-80.164663,26.085386,-80.164579,26.086336,-80.164579,26.086336,-80.164495,26.087314,-80.164495,26.087314,-80.164495,26.087795,-80.164495,26.087795,-80.164511,26.087934,-80.164511,26.087934,-80.164518,26.088665,-80.164518,26.088665,-80.164518,26.089305,-80.164518,26.089305,-80.1645489,26.0902059,-80.1645489,26.0902059,-80.164633,26.091104,-80.164633,26.091104,-80.164678,26.092254,-80.164678,26.092254,-80.16474,26.094554,-80.16474,26.094554,-80.164755,26.098415,-80.164755,26.098415,-80.16477,26.099506,-80.16477,26.099506,-80.16474,26.100296,-80.16474,26.100296,-80.164694,26.101024,-80.164694,26.101024,-80.164625,26.101795,-80.164625,26.101795,-80.164518,26.102464,-80.164518,26.102464,-80.164404,26.103105,-80.164404,26.103105,-80.164312,26.103784,-80.164312,26.103784,-80.164175,26.105045,-80.164175,26.105045,-80.164076,26.106176,-80.164076,26.106176,-80.164053,26.1068849,-80.164053,26.1068849,-80.164066,26.107339,-80.164066,26.107339,-80.1640396118164,26.10733985900879)),'mask=overlapbdydisjoint querytype=window') = 'TRUE'

  • An internal error has ocurred when I try to create new DC

    Hi everyone,
    When I try to create a new Web Dynpro DC, its will return "An internal error has occurred.See error log for more details". No matter whatever name I give still same.
    Message: Resource /JDI.....com alredy exists.
    Exception: org.eclipse.core.internal.resource.ResourceException: Resource /JDI.....com already exists.
    p/s: I have checked in DTR and the DC are not exists.
    Kindly please help.
    Thanks.

    Dear Pandya,
    Here some error that I get:
    Kind        Description     Resource     Location
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Abort.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Discard.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     GetTransfers.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Request_Abort.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Request_Discard.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Request_GetTransfers.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Request_Restart.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Response_Start.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid return type) for the method createModelClassFactory     Start.java     line 31
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid type) for the field TransferViewer3.TYPED_MODEL_INFO     TransferViewer3.java     line 30
    Error     com.sap.tc.webdynpro.model cannot be resolved (or is not a valid type) for the field VendorAdmWsModel.TYPED_MODEL_INFO     VendorAdmWsModel.java     line 30
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a type     Abort.java     line 32
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a type     Restart.java     line 32
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     Abort.java     line 14
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     AbortResponse.java     line 14
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     Discard.java     line 14
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     GetTransfersResponse.java     line 14
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     DeleteVendor.java     line 14
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     DeleteVendorResponse.java     line 14
         Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     Request_CreateVendor.java     line 14
    Error     com.sap.tc.webdynpro.model cannot be resolved or is not a valid superclass     Request_DeleteVendor.java     line 14
    Error     javax.xml.namespace cannot be resolved (or is not a valid type) for the field TransferViewer3.interfaceQName     TransferViewer3.java     line 23
    Error     javax.xml.namespace cannot be resolved (or is not a valid type) for the field VendorAdmWsModel.interfaceQName     VendorAdmWsModel.java     line 23
    Error     The constructor Object(VendorAdmWsModel, ICMIModelClass) is undefined     Request_CreateVendor.java     line 25
    Error     The constructor Object(VendorAdmWsModel, ICMIModelClass) is undefined     Response_UpdateVendor.java     line 25
    Error     The constructor Object(VendorAdmWsModel, ICMIModelClass) is undefined     UpdateVendor.java     line 25
    Error     The constructor Object(VendorAdmWsModel, ICMIModelClass) is undefined     UpdateVendorResponse.java     line 25
    Error     The method associatedModel() is undefined for the type DeleteVendor     DeleteVendor.java     line 21
    Error     The method associatedModel() is undefined for the type DeleteVendorResponse     DeleteVendorResponse.java     line 21
    Error     The method associatedModel() is undefined for the type Request_DeleteVendor     Request_DeleteVendor.java     line 21
    Error     The method associatedModel() is undefined for the type Request_Discard     Request_Discard.java     line 21
    Error     The method associatedModel() is undefined for the type Request_GetTransfers     Request_GetTransfers.java     line 21
    Error     The method associatedModel() is undefined for the type Request_GetVendors     Request_GetVendors.java     line 21
    Error     The method associatedModel() is undefined for the type Request_Restart     Request_Restart.java     line 21
    Error     The method associatedModel() is undefined for the type Request_Start     Request_Start.java     line 21
    Error     The method associatedModel() is undefined for the type Request_UpdateVendor     Request_UpdateVendor.java     line 21
    Error     The method associatedModel() is undefined for the type Response_Abort     Response_Abort.java     line 21
    Error     The method associatedModel() is undefined for the type Response_CreateVendor     Response_CreateVendor.java     line 21
    Error     The method associatedModel() is undefined for the type Response_DeleteVendor     Response_DeleteVendor.java     line 21
    Error     The method associatedModel() is undefined for the type Response_Discard     Response_Discard.java     line 21
    Error     The method associatedModel() is undefined for the type Response_GetTransfers     Response_GetTransfers.java     line 21
    Error     The method associatedModel() is undefined for the type Response_GetVendors     Response_GetVendors.java     line 21
    Error     The method createModelClassFactory() is undefined for the type Response_CreateVendor     VendorAdmWsModel.java     line 64
    Error     The method createModelClassFactory() is undefined for the type Response_DeleteVendor     VendorAdmWsModel.java     line 62
    Error     The method createModelClassFactory() is undefined for the type Response_Discard     TransferViewer.java     line 58
    Error     The method createModelClassFactory() is undefined for the type Response_GetTransfers     TransferViewer.java     line 52
    Error     The method createModelClassFactory() is undefined for the type Response_GetVendors     VendorAdmWsModel.java     line 61
    Error     The method createModelClassFactory() is undefined for the type Start     TransferViewer3.java     line 40
    Error     The method createModelClassFactory() is undefined for the type StartResponse     TransferViewer3.java     line 38
    Error     The method createModelClassFactory() is undefined for the type TaskInfo     TransferViewer.java     line 53
    Error     The method createModelClassFactory() is undefined for the type UpdateVendor     VendorAdmWsModel.java     line 59
    Error     The method createModelClassFactory() is undefined for the type UpdateVendorResponse     VendorAdmWsModel.java     line 65
    Error     The method createTypedModelInfo() is undefined for the type TransferViewer     TransferViewer.java     line 30
    Error     The method createTypedModelInfo() is undefined for the type TransferViewer3     TransferViewer3.java     line 30
    Error     The method createTypedModelInfo() is undefined for the type VendorAdmWsModel     VendorAdmWsModel.java     line 30
    Error     The method execute() is undefined for the type Request_Abort     TransferViewer.java     line 371
    Error     The method getAttributeValueAsBoolean(String) is undefined for the type Object     DestinationInfo.java     line 112
    Error     The method getAttributeValueAsBoolean(String) is undefined for the type Object     DestinationInfo.java     line 242
    Error     The method getRelatedModelObject(String) is undefined for the type Request_Abort     Request_Abort.java     line 60
    Error     The method getRelatedModelObject(String) is undefined for the type Request_CreateVendor     Request_CreateVendor.java     line 46
    Error     The method getRelatedModelObject(String) is undefined for the type Request_CreateVendor     Request_CreateVendor.java     line 60
    Error     The method getRelatedModelObject(String) is undefined for the type Request_DeleteVendor     Request_DeleteVendor.java     line 46
    for the type Request_GetVendors     Request_GetVendors.java     line 60
    Error     The method getRelatedModelObject(String) is undefined for the type Request_Restart     Request_Restart.java     line 46
    Error     The method getRelatedModelObject(String) is undefined for the type Request_Restart     Request_Restart.java     line 60
    Error     The method getRelatedModelObject(String) is undefined for the type Request_Start     Request_Start.java     line 46
    Error     The method getRelatedModelObject(String) is undefined for the type Request_Start     Request_Start.java     line 60
    Error     The method getRelatedModelObject(String) is undefined for the type Request_UpdateVendor     Request_UpdateVendor.java     line 46
    Error     The method getRelatedModelObject(String) is undefined for the type Response_Start     Response_Start.java     line 46
    Error     The method getRelatedModelObject(String) is undefined for the type Response_UpdateVendor     Response_UpdateVendor.java     line 46
    Error     The method getRelatedModelObject(String) is undefined for the type UpdateVendor     UpdateVendor.java     line 46
    Error     The method getRelatedModelObjects(String) is undefined for the type GetTransfersResponse     GetTransfersResponse.java     line 46
    Error     The method getRelatedModelObjects(String) is undefined for the type GetVendorsResponse     GetVendorsResponse.java     line 46
    Error     The method removeRelatedModelObject(String, DestinationInfo) is undefined for the type GetVendorsResponse     GetVendorsResponse.java     line 66
    Error     The method removeRelatedModelObject(String, TaskInfo) is undefined for the type GetTransfersResponse     GetTransfersResponse.java     line 66
    Error     The method setAttributeValue(String, String) is undefined for the type Object     Abort.java     line 52
    Error     The method setAttributeValueAsBoolean(String, boolean) is undefined for the type Object     DestinationInfo.java     line 117
    Error     The method setAttributeValueAsBoolean(String, boolean) is undefined for the type Object     DestinationInfo.java     line 247
    Error     The method setRelatedModelObject(String, AbortResponse) is undefined for the type Response_Abort     Response_Abort.java     line 52
    Error     The method setRelatedModelObject(String, CreateVendor) is undefined for the type Request_CreateVendor     Request_CreateVendor.java     line 52
    Error     The method setRelatedModelObject(String, CreateVendorResponse) is undefined for the type Response_CreateVendor     Response_CreateVendor.java     line 52
    Error     The method setRelatedModelObject(String, Discard) is undefined for the type Request_Discard     Request_Discard.java     line 52
    Error     The method setRelatedModelObject(String, GetTransfersResponse) is undefined for the type Response_GetTransfers     Response_GetTransfers.java     line 52
    Error     The method setRelatedModelObject(String, GetVendors) is undefined for the type Request_GetVendors     Request_GetVendors.java     line 52
    Error     The method setRelatedModelObject(String, GetVendorsResponse) is undefined for the type Response_GetVendors     Response_GetVendors.java     line 52
    Error     The method setRelatedModelObject(String, Response_Abort) is undefined for the type Request_Abort     Request_Abort.java     line 66
    Error     The method setRelatedModelObject(String, Response_CreateVendor) is undefined for the type Request_CreateVendor     Request_CreateVendor.java     line 66
    Error     The method setRelatedModelObject(String, Response_DeleteVendor) is undefined for the type Request_DeleteVendor     Request_DeleteVendor.java     line 66
    Error     The method setRelatedModelObject(String, Response_Discard) is undefined for the type Request_Discard     Request_Discard.java     line 66
    Error     The method setRelatedModelObject(String, UpdateVendorResponse) is undefined for the type Response_UpdateVendor     Response_UpdateVendor.java     line 52
    Error     The method setRelatedModelObjects(String, List) is undefined for the type GetTransfersResponse     GetTransfersResponse.java     line 52
    Error     The method setRelatedModelObjects(String, List) is undefined for the type GetVendorsResponse     GetVendorsResponse.java     line 52
    Error     TYPED_MODEL_INFO cannot be resolved     TransferViewer.java     line 61
    Error     TYPED_MODEL_INFO cannot be resolved     VendorAdmWsModel.java     line 52

  • When trying to update  Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

    When trying to update  Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps?   Why does my Old apple ID keep appearing and how can I get Apple to change this?

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • Pages crashes when opening any document on iPad 3 Latest version.   I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

    Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

    I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

    David Boroditsky wrote:
    The problem is that the mac chokes on having 2 identical mics attached at the same time.
    Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
    The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

  • When I try to create a calendar announcement in my iCloud calendar thru my PC / Outlook, it says 'the set of folders could not be opened. The information store could not be opened'. Can anyone help?  This means I cannot set any calendar events thru my PC.

    When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened.  The information store could not be opened'.
    I cannot set any calendar events for my shared calendar.  Can ayone help?

    If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).

Maybe you are looking for

  • How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

  • ITunes on two computers, how to interact

    How do import songs from one mac to the other with iTunes. I can't find a way to solve this. Both iTunes contains about 4000 songs. It's a **** of a job adding a song to the library looking in the finderlist for a particular song. I download on two c

  • How to add appointment date into CRMD_ORDER TCODE

    Hello i am trying to add 3 dates into the appointment area of the TCODE CRMD_ORDER,i am making this action into de BADI ORDER SAVE, and depents of a specific date of the TCODE i make the 3 differs dates after that ,i fill the input fields tables and

  • Good, reasonably priced USB Sticks for Mac?

    Hello, can somebody help me out here please? I am in need of a USB Stick to transfer my important web-development data from my Mac Mini here (in Austria) to my father's Mac Book Pro in Scotland. The problem is that my local Apple retailer can only of

  • "Error -42032" message when starting up iTunes 10.2

    Immediately after I upgraded my 15" MacBook Pro to iTunes 10.2 a couple of days ago I began getting this error message whenever I started up the program. After dismissing the error message iTunes seems to work fine. It's more of a nuisance than a maj