When is/are the Assignment Rules triggered ?

Documentation mention that assignment rules are run when the reassign flag is flagged.
Pls. when are the assignment rules triggered other than that... I mean: a) During Opportunity import f.example ? b) When a new Opportunity is created ?
Txs. for any help.
Antonio

Hi Bob,
Txs. for your help.
In the import case, I suppose that I should have the re-assing flag as part of the import data... Pls. is that correct ?
Antonio

Similar Messages

When are the mail rules triggered

I have written a short piece of applescript code that is called by a rule for incoming mail. The rule includes some checks to see if the 'from' address contains certain text strings and calls the script if any are found.
The way the script works now is to get all of the messages in the 'inbox' of a specific account and check all of them again for any that contain the same 'from' address text strings and, for each one it finds, saves a copy of the message on disk and then moves the message into a special mail folder.
All this works well - mostly. Occasionally it seems to miss one message (using the 'Apply Rules' menu option when the message is selected works so not much is lost) which has an identical 'from' text to others that are processed.
What I'm wondering is:
1) is the rule applied once for each message as it is transferred from the ISP into the inbox or is the rule applied once all of the messages has been transferred in?
2) if the rule is applied to each message, I assume this means that my script is executed multiple times. Therefore is there a way for the script to be told which message it is being called for?
Thanks
Susan

I think the rule fires once per message that matches the conditions - but if you call a script, it is passed as a list. The skeleton below I use in several scripts, some rule fired. The advantage of this format is that you can select several messages and launch the script manually, or have it fired by rule, and either way it works.
The best location for such scripts is in your Library/Scripts/Applications/Mail folder, so that they are listed in the scripts menu when Mail is the front application and not otherwise, leaving your scripts menu uncluttered by inappropriate scripts.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">using terms from application "Mail"
on perform mail action with messages theMsges --for rule TheRule
tell application "Mail"
repeat with ThisOne in theMessages
--now do something with ThisOne
end repeat
end tell
end perform mail action with messages
end using terms from
using terms from application "Mail"
on run
tell application "Mail" to set sel to selection
tell me to perform mail action with messages (sel)
end run
end using terms from
</pre>

Wordpress locally with MAMP and when I tried to customize my permalinks I get this message "If your .htaccess file were writable, we could do this automatically, but it isn't so these are the mod_rewrite rules you should have in your htaccess file.

I installed MAMP Pro and Wordpress locally and when I tried to customize my permalinks I got this message "
If your .htaccess file were writable, we could do this automatically, but it isn’t so these are the mod_rewrite rules you should have in your .htaccess file. Click in the field and press CTRL + a to select all."
Where can I find the .htaccess file?

Have you tried there Forums?
MAMP Forum • Index page
WordPress › Support

What are the conversion rules

what are the conversion rules?can anybody give information on that?points wil be rewarded?

hI..
From sap help....
Conversion Rules for Elementary Data Types
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
The following conversion tables define the rules for converting elementary data types for all possible combinations of source and target fields.
C D F I N P STRING T X XSTRING
Source Type Character

Conversion table for source type C
Target
Conversion
C
The target field is filled from left to right. If it is too long, it is filled with blanks from the right. If it is too short, the contents are truncated from the right.
D
The character field must contain an 8-character date in the format YYYYMMDD .
F
The contents of the source field must be a valid representation of a type F field as described in Literals.
N
Only the digits in the source field are copied. The field is right-justified and filled with trailing zeros.
I, P
The source field must contain the representation of a decimal number, that is, a sequence of digits with an optional sign and no more than one decimal point. The source field can contain blanks. If the target field is too short, an overflow may occur. This may cause the system to terminate the program.
STRING
The occupied length of the source field is copied. All trailing spaces are truncated.
T
The character field must contain a six-character time in HHMMSS format.
X
Since the character field must contain a hexadecimal string, the only valid characters are 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F. This string is packed as a hexadecimal number, transported left-justified, and filled with zeros or truncated on the right.
XSTRING
As for fields of type X, except that the target field is not filled with zeros.
Source Type Date
Conversion table for source type D
Target
Conversion
C
The date is transported left-justified without conversion.
D
Transport without conversion.
F
The date is converted into a packed number. The packed number is then converted into a floating point number (see corresponding table).
N
The date is transported left-justified without conversion and, if necessary, filled with zeros on the right.
I, P
The date is converted to the number of days since 01.01.0001.
STRING
The date is converted to a character field, which is then converted to a character string.
T
Not supported. Results in an error message during the syntax check or in a runtime error.
X
The date is converted to the number of days since 01.01.0001 in hexadecimal format.
XSTRING
As for fields of type X, except that only significant bytes are copied.
Source Type Floating Point Number
Conversion table for source type F
Target
Conversion
C
The floating point number is converted to the <mantissa>E<exponent> format and transported to the character field. The value of the mantissa lies between 1 and 10 unless the number is zero. The exponent is always signed. If the target field is too short, the mantissa is rounded. The length of the character field must be at least 6 bytes.
D
The source field is converted into a packed number. The packed number is then converted into a date field (see corresponding table).
F
Transport without conversion.
N
The source field is converted into a packed number. The packed number is then converted into a numeric text field (see corresponding table).
I, P
The floating point number is converted to an integer or fixed point value and, if necessary, rounded.
STRING
As for fields of type C, except that the maximum number of places is used for the mantissa (maximum precision). Despite this, different signs or exponents can lead to different string lengths.
T
The source field is converted into a packed number. The packed number is then converted into a time field (see corresponding table).
X
The source field is converted into a packed number. The packed number is then converted into a hexadecimal number (see corresponding table).
XSTRING
As for fields of type X, except that leading zeros are not copied.
Source Type Integer
Type I is always treated in the same way as type P without decimal places. Wherever type P is mentioned, the same applies to type I fields.
Source Type Numeric Text
Conversion table for source type N
Target
Conversion
C
The numeric field is treated like a character field. Leading zeros are retained.
D
The numeric field is converted into a character field. The character field is then converted into a date field (see corresponding table).
F
The numeric field is converted into a packed number. The packed number is then converted into a floating point number (see corresponding table).
N
The numeric field is transported right-justified and filled with zeros or truncated on the left.
I, P
The numeric field is interpreted as a number, and transferred to the target field, where it is right-justified, and adopts a plus sign. If the target field is too short, the program may be terminated.
STRING
As for fields of type C. The length of the character string matches the length of the numeric text.
T
The numeric field is converted into a character field. The character field is then converted into a time field (see corresponding table).
X
The numeric field is converted into a packed number. The packed number is then converted into a hexadecimal number (see corresponding table).
XSTRING
As for fields of type X, except that leading zeros are not copied.
Source Type Packed Number
If the program attribute Fixed point arithmetic is set, the system rounds type P fields according to the number of decimal places or fills them out with zeros.
Conversion table for source type P
Target
Conversion

C
The packed field is transported right-justified to the character field, if required with a decimal point. The last position is reserved for the sign. Leading zeros appear as blanks. If the target field is too short, the sign is omitted for positive numbers. If this is still not sufficient, the field is truncated on the left. ABAP indicates the truncation with an asterisk (*). If you want the leading zeros to appear in the character field, use UNPACK instead of MOVE.
D
The packed field value represents the number of days since 01.01.0001 and is converted to a date in YYYYMMDD format.
F
The packed field is accepted and transported as a floating point number.
N
The packed field is rounded if necessary, unpacked, and then transported right-justified. The sign is omitted. If required, the target field is filled with zeros on the left.
I, P
A packed field is converted to type I. The resulting four bytes are placed into the target field right-justified. If the target field is too short, an overflow occurs. If the target field is longer, it is filled with zeros on the left.
STRING
As for fields of type C, except that leading zeros are not generated.
T
The packed field value represents the number of seconds since midnight and is converted to a time in HHMMSS format.
X
A packed field is converted to type I. The resulting four bytes are placed into the target field right-justified and in big-endian format. If the target field is too short, it is truncated from the left. If the target field is longer than 4, it is filled with zeros on the left. Negative numbers are represented by the two's complement (= bit complement +1).
XSTRING
As for fields of type X, except that leading zeros are not generated.
Source Type String
Conversion table for source type STRING
Target
Conversion
C
The target field is filled from left to right. If it is longer than the string, it is filled with trailing spaces. If it is too short, the contents are truncated from the right.
D
The string must contain an 8-character date in the format YYYYMMDD .
F
The contents of the string must be a valid representation of a type F field as described in Literals.
N
Only digits in the string are copied. The field is right-justified and filled with trailing zeros. If the target field is too short, it is truncated from the left.
I, P
The string must contain the representation of a decimal number, that is, a sequence of digits with an optional sign and no more than one decimal point. The source field can contain blanks. If the target field is too short, an overflow may occur. This may cause the system to terminate the program.
STRING
The source string is copied to the target string unconverted.
T
The string must contain a six-character time in HHMMSS format.
X
Since the character field must contain a hexadecimal-character string, the only valid characters are 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F. This character string is packed as a hexadecimal number, transported left-justified, and filled with zeros or truncated on the right.
XSTRING
As for target fields of type X, except that the field is not filled with zeros.

Source Type Time
Conversion table for source type T
Target
Conversion
C
The source field is transported left-justified without conversion.
D
Not supported. Results in an error message during the syntax check or in a runtime error.
F
The source field is converted into a packed number. The packed number is then converted into a floating point number (see corresponding table).
N
The date is converted into a character field. The character field is then converted into a numeric text field (see corresponding table).
I, P
The date is converted to the number of seconds since midnight.
STRING
The time is converted to a character field, which is then converted to a character string.
T
The date is transported left-justified without conversion and, if necessary, filled with zeros on the right.
X
The date is converted to the number of seconds since midnight in hexadecimal format.
XSTRING
As for fields of type X, except that only significant bytes are copied.
Source Type Hexadecimal Field
Conversion table for source type X
Target
Conversion
C
The value in the hexadecimal field is converted to a hexadecimal character string, transported left-justified to the target field, and filled with zeros.
D
The source field value represents the number of days since 01.01.0001 and is converted to a date in YYYYMMDD format.
F
The source field is converted into a packed number. The packed number is then converted into a floating point number (see corresponding table).
N
The source field is converted into a packed number. The packed number is then converted into a numeric text field (see corresponding table).
I, P
The value of the source field is interpreted as a hexadecimal number. It is converted to a packed decimal number and transported right-justified to the target field. If the hexadecimal field is longer than 4 bytes, only the last four bytes are converted. If it is too short, a runtime error may occur.
STRING
As for target fields of type C, except that the field is not filled with zeros. The length of the string is twice the length of the hexadecimal field.
T
The source field value represents the number of seconds since midnight and is converted to a time in HHMMSS format.
X
The value is transported left-justified and filled with X'00' on the right, if necessary.
XSTRING
The hexadecimal field is copied completely that is, trailing zeros are not truncated.
Source Type Byte Sequence
Conversion table for source type XSTRING
Target
Conversion
C
The value in the byte sequence is converted to a hexadecimal character string, transported left-justified to the target field, and filled with zeros.
D
The byte sequence value represents the number of days since 01.01.0001 and is converted to a date in YYYYMMDD format.
F
The content of the byte sequence is converted into a packed number. The packed number is then converted into a floating point number (see corresponding table).
N
The content of the byte sequence is converted into a packed number. The packed number is then converted into a numeric text field (see corresponding table).
I, P
The content of the byte sequence is interpreted as a hexadecimal number. It is converted to a packed decimal number and transported right-justified to the target field. If the byte sequence is longer than 4 bytes, only the last four bytes are converted. If it is too short, a runtime error may occur.
STRING
As for target fields of type C, except that the field is not filled with zeros. The length of the string is twice the length of the byte sequence.
T
The byte sequence value represents the number of seconds since midnight and is converted to a time in HHMMSS format.
X
The byte sequence is transported left-justified and filled with X'00' on the right, if necessary.
XSTRING
The source byte sequence is copied to the target byte sequence unconverted.
Conversion Rules for Internal Tables
Internal tables can only be converted into other internal tables. You cannot convert them into structures or elementary fields.
Internal tables are convertible if their line types are convertible. The convertibility of internal tables does not depend on the number of lines.
Conversion rules for internal tables:
Internal tables which have internal tables as their line type are convertible if the internal tables which define the line types are convertible.
Internal tables which have line types that are structures with internal tables as components are convertible according to the conversion rules for structures if the structures are compatible.
Conversion Rules for Structures
ABAP has one rule for converting structures that do not contain internal tables as components. There are no conversion rules for structures that contain internal tables. You can only make assignments between structures that are compatible.
You can combine convertible structures in the following combinations:
Converting a structure into a non-compatible structure
Converting elementary fields into structures
Converting structures into elementary fields
In each case, the system first converts all the structures concerned to type C fields and then performs the conversion between the two resulting elementary fields. The length of the type C fields is the sum of the lengths of the structure components. This rule applies to all operations using structures that do not contain internal tables.
If a structure is aligned, the filler fields are also added to the length of the type C field.
A non-aligned structure without filler fields:
If you convert a structure into a shorter structure, the original structure is truncated. If you convert a structure into a longer one, the parts at the end are not initialized according to their type, but filled with blanks.
It can make sense to assign a structure to another, incompatible, structure if, for example, the target structure is shorter than the source, and both structures have the same construction over the length of the shorter structure. However, numeric components of structures that are filled in incompatible assignments may contain nonsensical or invalid values that may cause runtime errors.
DATA: BEGIN OF FS1,
INT TYPE I VALUE 5,
PACK TYPE P DECIMALS 2 VALUE 2.26,
TEXT(10) TYPE C VALUE Fine text,
FLOAT TYPE F VALUE 1.234e+05,
DATA TYPE D VALUE 19950916,
END OF FS1.
DATA: BEGIN OF FS2,
INT TYPE I VALUE 3,
PACK TYPE P DECIMALS 2 VALUE 72.34,
TEXT(5) TYPE C VALUE Hello,
END OF FS2.
WRITE: / FS1-INT, FS1-PACK; FS1-TEXT, FS1-FLOAT, FS1-DATE.
WRITE: / FS2-INT, FS2-PACK, FS2-TEXT.
MOVE FS1 TO FS2.
WRITE: / FS2-INT, FS2-PACK, FS2-TEXT.
Message was edited by:
Rammohan Nagam

Why the PO action history is not updating when i perform the vacation rules

Hi,
Can any one explain why the action history is not updating when performed the vacation rules using the below example
Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
Note:we are using the 11.5.10.2 version.
The Action History in the following manner
Seq Action Performed By
================================
4 Approve C
3 Forward B
2 Reserved B
1 Forward A
0 Submit A
From the above action history why the user D name is not showing. Can any one let me know ASAP?
Regards,
Keivn.
Edited by: user10960960 on May 5, 2009 3:36 AM

When you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
Hope this helps,
Sandeep Gandhi

Extending Cairngorm - What are the ground rules?

I was wondering what the rules are as far as extending your application's Cairngorm classes, or creating new design patterns between Caingorm pieces.
What is the recommended practice for addressing custom requirements with Cairngorm? What if I wanted to add an injector between the Model and the View, so that the view does not contain a singleton reference? What if I wanted to add listeners to the FrontController for logging, precondition testing, and other cross-cutting concerns?
At what point does it become "not recommended practice" for me to tinker with the framework of my Cairngorm application?
I've been trying to construct a list of definite no-no's in Cairngorm. This way, if we have to extend Cairngorm, we can do so while treading lightly, and embracing the principles of the framework, even when we can't follow the paved path exactly.
The following link is my work in progress. I'd like to hear suggestions and thoughts.
http://cairngorm.jottit.com/what_not_to_do

Hey Harry,
Although this question may be better suited for someone from AC to respond I will try to provide some direction.
I think the ground rules for adding extensions to Cairngorm are pretty simple in that anyone is free to add extensions to accommodate specific implementations of the Framework. However only those which gain wide spread community support and adoption, and more importantly, are general enough to support typical project architectures would/should be considered to get rolled into future releases.
IMHO the power of Cairngorm is in it's simplicity and lack of unnecessary complexity. It is tempting to add additional functionality and patterns such as IoC/DI and so forth however these types of implementations may not be general enough to be considered for widespread adoption.
Hope that helps.
Best,
Eric

Why do text boxes show up as different colors when they are the same color?

I am baffled. I have created an InDesign document and I used the rectangle tool to create a blue box at the top of the document and one at the bottom. They are both filled with CMYK (100, 88, 35, 28). The one on the top of the document shows darker than the one at the bottom. I thought it was a document issue, so I created a new document. It does the same thing. I took the box at the top and moved it to the bottom and when it hit the half way point of the document, it changed colors (got lighter).
Any suggestions? Thanks.
Liz

No, what was once dark is now light and vice-a-versa. See screen capture above. When I rotate the page 180 degrees, here is what I get.

When exactly is the ISBD status triggered?

We have a number of projects/WBS that now has ISBD status. Now, when we check the budget profile, it should be issuing a warning at 90% usage and error on 110% usage. Some of these WBS/projects are only in 90% usage but the system already indicates that they have exceeded the budget.
Can someone please provide detailed explanation pertaining to this ISBD status and how it relates to budget exceeded error?
Thanks

If at least one of tolerance limits is exceeded at that time ISBD status set. For detail refer note 1045796
With Regards
Nitin P.

Can i know what are the thumb rules of sap r/3

hi,
sap gurus,
good afternoon to all,
can i know what are the list of thumb rules of sap r/3.
plz
regards,
balaji.t
09990019711

Hi,
Please Follow link
http://www.dbis.ethz.ch/research/publications/19.pdf
Thanks,
Raja

How to get SPL to snap to beat bar or other when clicking in the bar ruler

Been using Logic so long it hurts to ask. All of my settings got trashed moving to a new system.
I want to click in the bar ruler at measure 60 and have the SPL snap to 60 1 1 1 and not 60 1 1 .45 or 59 4 1 1 etc.
Logic never did this fractional snap to before. How do I fix it?
Thanks

Try installing https://addons.mozilla.org/en-US/firefox/addon/searchreset/ to reset your search providers.

Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
Any suggestions?
Many thanks

Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

V1.5.3 - 'diff' tool flags things as different when they are the same

Using the 'diff' tool to compare databases. Resultant 'diff' script contains a lot of statements like this :
ALTER TABLE "tabl1" MODIFY ("column1" NOT NULL ENABLE);
.. but when i run them on the target, it tells me that the columns are already not null. No, i'm not running on the wrong db. In fact running that command on both the source and destination dbs elicits the same error :
Error starting at line 1 in command:
ALTER TABLE "tabl1" MODIFY ("column1" NOT NULL ENABLE)
Error report:
SQL Error: ORA-01442: column to be modified to NOT NULL is already NOT NULL
01442. 00000 - "column to be modified to NOT NULL is already NOT NULL"
*Cause:
*Action:
Additionally, the 'diff' script when asked to compare functions includes the function definition in it's output. However running that on the target and then re-running the diff still flags that function as different.

Further, i had a table defined in both db, same columns different column lenght :
CREATE TABLE CDB_R_FIRMS_ADDRESSES
INT_FIRM_ID INTEGER NOT NULL,
ADDRESS_UUID VARCHAR2*(50 CHAR)* NOT NULL,
ADDRESS_TYPE INTEGER NOT NULL
CREATE TABLE CDB_R_FIRMS_ADDRESSES
INT_FIRM_ID NUMBER NOT NULL,
ADDRESS_UUID VARCHAR2*(200 BYTE)* NOT NULL,
ADDRESS_TYPE NUMBER NOT NULL
.. and 'diff' failed to spot the difference! If 'diff' does not consider '50 char' different to '200 byte', what does it consider a difference ?Am i not using 'diff' as it was intended ?

How do you stop requiring authentication when you are the administrator

Ok, so I'm the administrator (and not a savy computer type at that), but none-the-less when I go to move a newly created document, say, from the desktop to an established folder , I get a dialogue box saying: " The item _ could not be moved because (the name of the folder I want to move it into) cannot be modified. It then gives me the choice to authenticate. If I go ahead and click that and then give the password it gets in the folder okay, but I don't want to have to give it permission every time, so where do I go to stop this being a required step? Thanks.
G4 tower Mac OS X (10.3.9)

John,For some reason the permissions are not correct. First open Macintosh HD > Applications > Utilities > Disk Utility, select your hard disk and click 'Repair Permissions'. If that doesn't clear the issue. Single click on the folder icon that you are having trouble with, then type Apple and i (or choose Get Info from the File or contextual menu), move down to the owners section and give yourself ownership of that folder with read and write permission. (You will have to enter the admin password to make that change).
Get used to typing the admin password lots in Mac OS - it's the way we keep out system clean of spyware, viruses etc.
regards
mrtotes

Remind me again.. What are the iTunes rules?

I have more than one iMac. Can I mirror my entire iTunes media onto both iMac's? I have more than one iPad. I can ONLY sync one iPad up with one iMac/iTunes system? Just what are those rules? And why?

Yes you can copy the entire iTunes Library to another iMac and Authorise that Computer. Then Use Home Sharing to keep them in sync.
You can sync upto 10 devices on an itunes. However it does not let you just switch from one computer to another.

What the (bleep) are the password rules?!?!?

Skype provides NO INFORMATION WHATSOEVER about password rules. It just continually says the password is "too easy" - If you have password rules, tell me what the (bleep) they are so that I can comply!!!!

boonzer wrote:
I hate to admit it...but i'm not 100% savvy with my new Z10 yet...screen shot is accomplished by pressing both volume buttons at the same time....
Correct.
boonzer wrote:
now how do I find my sent email box?
In your Hub > touch the top right down arrow [˅] then tap the [+] symbol beside the email account you're sending from > Sent.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When is/are the Assignment Rules triggered ?

Similar Messages

Maybe you are looking for