When J_2IRG1BAL table needs to be updated.

Dear All,
We have created a new material (Finished goods). But not sure, when we need to update the table J_2IRG1BAL.
Please tell me which option I have given is correct.
1. Immediately after the material creation
2. After the goods receipt (i.e. Goods receipt updation in J1I5 with RMA classification)
3. After running a business cycle (Sales order to Invoice)
Kindly update me on this.
Also let me know the process for other materials (Semifinished, Capital, Raw materials)
Regards,
Mullairaja

Hi
Its always better to create the entry in J_2IRG1BAL after creation of the material.
You have to enter the below details like
MATNR
FORM packed or loose
WERKS
check this note which will be useful
Note 951955 - CIN General clarifications for RG1 goods
regards
SAP SD

Similar Messages

STZBC table need to be updated correctly for DST Brazil Change.

Hi All,
STZBC table need to be updated correctly for DST Brazil Change.
I see two options to change it:
1) Create a new line for 2009 in STZBC -> Variable time zone rule in DT1 and create the transport
2) Apply SAP Note 198411 (attached) in DT1 and create the transport
I have have concern for daylight saving as according to Note 1251372 there is no standard daylight saving time in brazil .
this note mention daylight saving for 2008/2009 (i,e daylight saving time in Brazil begins on October 19, 2008 and ends on February 15, 2009.) and this note is the latest note available.
what would be daylight saving time in brazil for year 2009/2010? should i need to raise message to SAP asking for any new note applicable to daylight saving?
Thanks for your help in advance.
Thanks&Regards
Shams

done

Custom table needs to be updated based on changes in Info type P0000

Hi All,
   I have a requirement wherein when we make changes to info type P0000 this should be reflected to a custom table.
If i create a new record, delete an existing record or make changes to a record in INFOTYPE P0000 this should also be reflected in my custom table.
   My custom table has 5 fields from info type p0000 and some custom fieds.
   please can you let me know exactly which user exit to use to acchieve the solution. and where exactly i can put the logic.
Thanks,
Mars

Hi Venkat,
I tried to code in the method AFTER_INPUT and executed but there are few thing which i have come across.
1. when ever i create a new record in PA40 and each time i save the screens of PA40 this method is called and based on check it tries to update the table taht many times.
2. The logic which i have used in the BADI implementations is as below:
DATA: l_text TYPE string,
             l_answer TYPE string,
             lw_split TYPE XXXX. (custom table)
IF old_innnn NE new_innnn.
    lw_split-mandt = sy-mandt.
    lw_split-pernr = new_innnn-pernr.
    lw_split-begda = new_innnn-begda.
    lw_split-endda = new_innnn-endda.
    l_text = 'Does this employee need a split STIP?'.
        Display a pop up message to the user.
    CALL FUNCTION 'POPUP_TO_CONFIRM'
      EXPORTING
        titlebar                    = 'Choose'
        text_question               = l_text
        text_button_1               = 'Yes'
        text_button_2               = 'No'
        default_button              = '1'
        display_cancel_button       = space
     IMPORTING
        answer                      = l_answer
     EXCEPTIONS
        text_not_found              = 1
        OTHERS                      = 2.
    IF sy-subrc EQ 0.
      IF l_answer EQ '1'.
        lw_split-stflg = 'Yes'.
      ELSE.
        lw_split-stflg = 'No'.
      ENDIF.
    ENDIF.
    MODIFY TABLE XXXX FROM lw_split.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
ENDIF.
3. when i try to activate this chunk of code it gives me error saying "XXXX" is unknown. i tried to declare it under TABLES but in Vain.
4 I have also tried to use the modify statement in IN_UPDATE instead of updating custom table in same method but its giving me same error "XXXX" is unknown. i tried to declare it under TABLES but in Vain.
can you let me know your view on this. The above chunk of code is in case of creating a new record in P0000 info type.
Thanks,
Mars
Edited by: Mars878 on Oct 13, 2009 9:18 AM

What do I do when Adobe Flash needs to be updated but Safari won't let me??

I have an iPhone 3g and every site I go on that has any kind of content that needs flash I cant view. I go through the Adobe site via the Apple.com all the way to the down load part, click install and then I get a prompt that Safari won't allow the install. Why? is their a way? Please help!!

No - this must come from Adobe.
If content on a website is provided with flash, Adobe doesn't have a flash player that is compatible with the iPhone.
If or when Adobe provides a flash player that is compatible with the iPhone - one that Apple approves, it will be included with a firmware update, or made available via the iTunes app store.

Tables needed to update for reconciliation

Hi all,
can any one please tell me what are the tables need to be updated for bank reconciliation of checks.
Please help me.
Thank you,
Bye.

Sorry about that! You can download Firefox 3.6 here: http://www.mozilla.com/firefox/all-older

I can't get the page numbers in my table of contents to update when I update the book.

I'm using Framemaker 11 and I have two TOCs in my book: one in English and one in French. Each TOC links to different documents in the same book. The reference page for each TOC is set and correctly displays the heading 1 and 2 I've told it to display, but the numbers do not update when the content in my document files changes to a different page. I've checked the conditional text settings in my document files; they are correct. When I update the book, I choose to update Numbering, All Cross-References, All Text Insets, OLE Links, Generate Table of Contents, Lists, and Indexes. What am I doing wrong? Thanks.

I just tested this out and saw the same result as Rick - a book with child books ignores all generated files within the child books. This applies to adding content from them (e.g. their titles) to actually including them in the output. This applies to all versions of FM since v.9!
However, there is a workaround for this. You need to use the hierarchical book structure in the parent book and create Folders for each book that you want to add. Then manually add the generated files (TOC, IX, List of..., etc.) and book to the respective folder. This is what it looks like for two child books in a parent book:
Note that the child book generated files (TOC, IOR) show as just regular files at this point in the parent book. To get the page numbering to be continuous throughout the parent book, you will need to make a couple of passes. First set folder, files and books to have the Numbering continue from the previous (if you want all sequential page numbers). This will set the page numbers correctly except for what they were in the respective book TOCs. You will need to use the starting page number of the child TOC files in each folder (it shows in the Book status bar when click on the TOC file in the master/parent book).
To set the individual book TOCs to be correct in the parent book, open the child book and set the TOC Numbering to start at the page stated in the parent book (status bar). Now update the child book to set the correct (parent book) page numbers in the child TOC. [This is a necessary manual step, as the page number assigned in the parent book is ignored when th child book is individually updated and FM uses 1 to start off the sequence in the child book.] Repeat for each child book in the master/parent book.
The final step is to Update the parent book and create the PDF. You should now have all of the files included in the PDF and the child TOCs should show the correct page numbers of the master book.
This whole process of books within books seems a bit borked and one shouldn't have to be jumping through hoops to include child generated files. Please report this as a bug via: https://bugbase.adobe.com/index.cfm

How to find out when a table was last updated?

Is there a way to find out when a table was last updated/inserted/deleted? Thanks!

There may be an easier way but if you are trying to get info on something that has already happened look at your redo logs and archived logs. It would be hard but in V$LOGMNR_CONTENTS you could find the max time for a given object. Note to use this you need to set up log miner. Since you did not give a version try the Oracle 9i DBA Guide pg 9-1.

When a table was updated

Hi,
in 10g, how can I see when a table was lastly updated ?
thank you.

I don't believe Oracle maintains a date of last update for DML operations, unlike DDL operations where you can see the date and time of the last change by looking at USER_TABLES.
If you need such a feature you would have to build it in, either adding a column which could for example be updated by a trigger every time the table is updated. However you may wish at that point to evaluate all the requirements. Is it a production database and if so are you looking for some kind of auditing solution ? It is probably to ask some questions liek this to fully understand the requirements before making any changes.
Regards

I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download. There is not enough available local storage to download these items. You can manage your local device storage usage in Settings."
How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone? Why is it telling me there is not enough local space?

Hi RileyAvaCadenRiver,
If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
Apple: iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

I currently have iTunes version 7 and I need to upgrade to version 10. I am afraid of losing all my music if I just download 10 and when I use the "Check for updates" in the version 7 help menu, it tells me the server cannot be contacted.

I currently have iTunes version 7 on my computer and need to upgrade to version 10 to sync my new nano iPod. When I tried the "check for updates" under the version 7 "help" menu, it said it could not contact the update server. I am afraid if I just download version 10 from the website, it will wipe out my music library. What should I do to upgrade?

Back up your music and install from the website. You probably won't need to do this, but if your library is erased, restore it from the backup.
(59049)

I am new to iphones and went to Itunes and it said my new iphone needed a software update. Now the apps that I put on wont work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

Memory Map: http://www.memory-map.co.uk/iphone/
0870: http://www.simonmaddox.com/
Viber: http://support.viber.com/home
VoucherCloud: http://questions.vouchercloud.com/

My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

It seems Apple is having some issues at their end. There have been hundreds of posts on the forum with the same problem.

HT4623 When connecting my iphone to my computer, message appears: iphone cannot be used because itunes needs to be updated. I updated on my Mac, but it isn't transferring to my phone. Tried looking at software updates on my phone - "no updates needed"

When connecting my iphone to my computer, message appears: iphone cannot be used because itunes needs to be updated. I updated on my Mac, but it isn't transferring to my phone. Tried looking at software updates on my phone - "no updates needed"

Okay, that means with the latest iOS software, it requires the latest version of iTunes on the computer. Which computer OS platform are you using. Now you are saying that after downloading the latest version of iTunes that your iPhone is not being recognized by iTunes? Completely different thing, and the iTunes on the iPhone has nothing to do with that anyway. The iTunes on the iPhone is just for purchases.
If you are having trouble with the iPhone being recognized by iTunes, use the appropriate link for your computer OS for assistance.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591

Help needed for data updation in User Defined Tables

Hello Experts,
I am developing one add-on in SAP B1 8.8 to input data in a User Defined Table described as under
Table Name
DriverMst UDT Type is No Object
Description
Stores the Driver master data which are used to get reference in Sale Delivery Form and Driver data management activity
User defined fields
Data Name
Data source
Size
Pane Level
Description
Driver Code
Code
Alphanumeric
0
No object table fixed field
System Name
Name
Alphanumeric
30
0
No object table fixed field
Full Name
FullName
Text
50
0
Father Name
FatherName
Text
50
0
Birth Date
BirthDate
Date
0
Phone Number
PhoneNo
Alphanumeric
50
0
Mobile No
MobileNo
Alphanumeric
13
0
I have created one form using screen painter displaying text boxes and bind them to the table.
This form is working absolutely fine when there are some data in table (i.e. Browse using navigation)
My problem is, when I click add button from tool bar the "OK" button turn to "Add" that means the form is set to Add mode, but when I click "Add" button after entering some data nothing happens and input data is not stored in Table. The same "OK" Button turned to "Update" when I do changes in loaded data, but my changes are not reflected to table after I click "Update".

Thanks Nagarajan,
None.
There is no such query. The table fields is directly linked to Edit Box or Combo Box in form.
From the examples I learned that I have to do something like this to get my table updated
Dim oUsrTbl As SAPbobsCOM.UserTable
Dim Res As Integer
oUsrTbl = oCompany.UserTables.Item("DRIVERMST")
oUsrTbl.Code = oBPC.Value 'Item Specific of Driver Code Edit Box
oUsrTbl.Name = Left(oBPN.Value, 30) 'Item Specific of Name Edit Box
oUsrTbl.UserFields.Fields.Item("U_FullName").Value = oMFN.Value
oUsrTbl.UserFields.Fields.Item("U_FatherName").Value = oFTHN.Value
oUsrTbl.UserFields.Fields.Item("U_BirthDate").Value = oDOB.Value
oUsrTbl.UserFields.Fields.Item("U_PhoneNo").Value = oPHN.Value
(Similar For rest ofthe fields)
Res = oUsrTbl.Add()
Just let me know that is this necessary to do like above.. To be frank there are few more fields and matrices on the form which I didn't mentioned. I am just trying to get recovered from first step to proceed further.
Regards

When J_2IRG1BAL table needs to be updated.

Similar Messages

Maybe you are looking for