When JSP 2.0 Release?

Please tell me.
Thanks.

I would guess around Java One. You can follow progress at this link http://jcp.org/en/jsr/detail?id=152

Similar Messages

  • Is there any more word on when apple will be releasing the thunderbolt to FireWire adapter?

    Is there any new word (newer than "in July") on when Apple will be releasing the Thunderbolt to FireWire Adaptor?

    Not yet.
    Best.

  • How to edit the campaign when status is Approved & Released

    Dear All,
    I am using the User Status profile to controll all the status of the campaign.
    The status are as follows
    1. Create
    2. Accept by Dept1
    3. Accept by Dept2
    4. Accept by Dept3
    5. Approve
    6. Release
    When user clicks on status Approve & Release the campaign goes into Display mode.
    Suppose user wants to edit the validity date of the campaign like prepone or postpone system will not allow to change.
    My question is Is it possible to edit, when the status Approve & Release ?
    Pls. help me.
    Regards
    Pramod

    Hi Pramod,
    According to system standard settings system will not allow to change the Campaign activity after approved or released  activities .
    But we can change the validity period in the approved state, if you want to change the any data like increase the cost or change the product hierarchy, at that time you need to get back staus and change the required data later move to forward.
    Idon't think any changes required for the released activity, but in the approved state client requires some changes , than we have to change the standard settings in the SPRO for the user interface settings and Status Profile of the activity .
    Regards
    Naren..

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • How to find the ME29N 'USER EXIT' when our save the release PO after.

    How to find the ME29N 'USER EXIT' when our save the release PO after.
    which user exit will be used?
    thanks.
    alex.

    Hi,
      process :
        go to tranx code :   ME29N ,
           System---->Status , here copy the program name (SAPLMEGUI),
         go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
         tranx code : CMOD ,  Utilites--->Sap Enanchement,
                                         specify the package name : ME
                                          and execute, displays a list of exits ,
                                 and find out our suitable exit based on requirement.
    check these :   EXIT_SAPMM06E_021
    reg
    Siva

  • When apple going to release boot camp update for windows 8?

    Hi everyone,
    I just upgraded to windows 8 on my iMac, but I cant adjust the brightness. does anyone know when apple going to release an update for boot camp to support win 8? or can anyone help me on how to adjust the brightness ? my screen is too bright
    Thanks

    Apple do not pre-announce releases, nobody here can answer as to when.

  • Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, WHEN is next dot release Camera Raw?

    I Purchased the Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, Mac Pro server update to Lion, WHEN is next dot release Camera Raw? My workflow has trippled in time because of this issue. I'm so frustrated with having to convert images in a slowed up piece of crap canon software package and then wait another decade for the newest LR to load the images I could crap fire! Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. As for Canon, they are not consistant with community software sharing and can kiss my *!! because to leave Adobe hanging sux!
    There should be new laws that penalize jerks that screw with workflow!
    Time is money, let's go Adobe!

    "so there are no Adobe staff here to see your rant."
    Oh, they're here    and they see it...
    BTW this might help?

  • Purchase requisition to be created when Inspection lot is released

    Hello,
    A Purchase Requisition need to be created (for external services) at the time of Inspection lot generation. I tried using the Inspection Plan operation control key with 'Extenally processed processing' with Info record, Pur Org details.. etc. Still, when Inspection lot is released, Purchase requisition is not generated.
    Any clue?
    Thanks
    JK

    Can you explain your business scenario.
    In standard QM you cannot create purchase requisition from inspection lot creation.
    1. You can use Userexit QAAT001  to create purchase req if needed.
    2. Refer to "external processing in QM'  if you want to create Purchase req during production.
    http://help.sap.com/saphelp_46c/helpdata/en/42/75f1e256cc11d1896a0000e8323c4f/content.htm

  • Billing documents should not be created when it is not released to accounti

    Hi SD gurus,
    In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
    Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
    Please suggest a solution for this.
    Regards,
    Senthil.

    Thanks giri.
    For the following reasons, the billing documents are not released to accounting.
    1. If the user wrongly chosen the billing type for the delivery.
    2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
    Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
    Hope this will be suffice to understand my issue and suggest a suitable solution.
    Points will be rewarded.
    Regards,
    Kumar.

  • User exit/BADI triggered when WWI document is released in CG02

    Hi,
    In CG02 when a WWI document is created for a specification i want to know user exit/BADI associated when the document is released/accept in the report management.
    Any help would be appriciated.
    Thanks,
    Sridhar.

    Hello
    the user exits mentioned do have special purposes.
    C1G20001 and C1G20002 are related with report management system
    C1G20003 and C1G20004 are related with report information system
    The other exit is related to tasks which can be "programmed" in using the report header. The "release/accept"  process is generally related to the definition of the generation variant.
    Regarding the mentioned BADI I have no special knowledge if it can be used here.
    Could you indicate the reason behind your question?
    Reason is: based on the generation variant definition there is no "real report" which can be "released" or the report is immediately "released" and the user exits mentioned will not help any more in most scenarios.
    With best regards
    C.B.
    PS: I have done a small research: Badi EHSS_WWI_BADI_001 is available starting ERp 6.0 o my knowlegde; depending to your business needs there is a chance that this Badi can help.
    Edited by: Christoph Bergemann on May 24, 2010 3:57 PM

  • I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

    I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

    If you have no photos:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
    Regards
    TD

  • When will 5s be released in Italy?

    Hi,
    I live in Italy and yesterday I watched the presentation of the new iPhone 5S. At the end of the presentation they said that within December 2013 it will be released in over 100 countries.
    Usually Italy is in the second wave, few weeks later the release in the first wave countries. They don't specify anything this time.
    Does anyone know when it will be out in the second wave countries?
    Thank you.

    If you watched the keynote, then that is all the info that is available at present, so you will have to wait and perhaps you will get more info after 20th when the 5s is released.
    Keep an eye on your Apple stores and mobile phone carriers to see when they are announcing them for release.

  • When will 2323c be released in China?

    We have been waiting for it for 8 months!
    Does anybody know when it will be release in China?
    Thx in advance! :-)

    If you watched the keynote, then that is all the info that is available at present, so you will have to wait and perhaps you will get more info after 20th when the 5s is released.
    Keep an eye on your Apple stores and mobile phone carriers to see when they are announcing them for release.

  • Fields copied to AUC from WBS Element (when WBS Element is released)

    Hi,
    I would like to know what are the fields that are copied to AUC from WBS element (when WBS Element is released).
    Regards,
    Vivian

    Hi Vivian,
    menu path: Asset Accounting / Valuation / Determine Depreciation Areas in the Asset Class
    Select there your asset under construction asset class.
    Here you can fill in default values. (when you click on the fields you get more fields)
    When you want to fill in other fields you can use a substitution ( Asset Accounting / Master Data / Define Substitution)
    In our case, i think standard
    The field description (WBS)
    Req cost center (WBS)
    Plant (WBS)
    BA  (WBS)

  • Trigger proxy when Process Order is released

    Dear ABAP Experts,
    I have a requirement where in I am supposed to send out a proxy with the details of the Process Order that is being released when the PO is released using COR2 or COHVPI transaction. The same can be achieved by coding in specific User Exits. However, I would like to explore the feasibility of achieving the same using Work flows as I am new to WF's and this is my first attempt at it. Please do share your views if this is something which is do-able using Workflows and also do share the steps to meet my requirement. Hope this marks the beginning of my work in Workflows..
    Thank you in advance.
    Looking forward to your responses. Thanks again.
    Best Regards,
    Ram

    First of all there is a workflow forum SAP Business Workflow
    Secondly, you can use a workflow event to call a function module using transaction SWE2 or trigger a workflow and in it used a task to call an object or class method to call the proxy. in both cases calling the proxy in a user exit and not by workflow is more efficient because:
    Catching the event is done by an RFC which adds a possibility for errors
    Workflow logs every action which will adds unnecessary date to the DB in this case.
    You use workflows for this kind of process when you have no user exit or BADI after the save to the DB. if this is the case you need to check if you have a standard event raised by the release of the production order (turn the event trace on in transaction SWELS, release an order and look at the log in transaction SWEL) if you do not have an event you can raise one by change documents/status changes/user exit etc.

Maybe you are looking for