When running a BI session, what is "detailed/extended log" for?
Hello all,
I couldn't find any information about "detailed log" checkbox (forum, notes, online help, sap library, google).
It is displayed in a popup when we run a BI session from SM35 transaction. It's also the LOGALL parameter ("extended log") of RSBDCSUB program.
By debugging the system, I noticed that it was used only with All-screen and Error-only display modes. In No-screen mode, the BI session is run with detailed log on.
In All-screen and Error-only modes, the message 00355 "Transaction was processed successfully" is not stored in the log if the detailed log option is off.
Are there any other differences?
Thx a lot
Thx Harald, I missed it.
But unfortunately, it doesn't work as described, or there is something I don't understand. You can try with the following code which changes FR 1234567890 bank name to sy-uzeit using FI02 transaction (please create the bank before running the program), and produces both S and W messages, whatever extended log is on or off. The only difference is about the message number 00355 as I stated previously.
REPORT zzysro_test6.
PARAMETERS p_logall TYPE flag AS CHECKBOX.
DATA ls_bdcdata TYPE bdcdata.
DATA lt_bdcdata TYPE TABLE OF bdcdata.
DEFINE d.
clear ls_bdcdata.
ls_bdcdata-program = '&1'.
ls_bdcdata-dynpro = '&2'.
ls_bdcdata-dynbegin = '&3'.
append ls_bdcdata to lt_bdcdata.
END-OF-DEFINITION.
DEFINE f.
clear ls_bdcdata.
ls_bdcdata-fnam = '&1'.
ls_bdcdata-fval = '&2'.
append ls_bdcdata to lt_bdcdata.
END-OF-DEFINITION.
DEFINE f2.
clear ls_bdcdata.
ls_bdcdata-fnam = '&1'.
ls_bdcdata-fval = &2.
append ls_bdcdata to lt_bdcdata.
END-OF-DEFINITION.
d sapmf02b 0100 x.
f bdc_cursor bnka-banks.
f bdc_okcode /00.
f bnka-banks fr.
f bnka-bankl 1234567890.
d sapmf02b 0110 x.
f bdc_cursor bnka-banka.
f2 bnka-banka sy-uzeit.
f bdc_okcode =upda.
DATA l_bi_qid TYPE apqi-qid.
DATA l_group TYPE apqi-groupid VALUE 'ZSRO'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
group = l_group
keep = 'X'
user = sy-uname
IMPORTING
qid = l_bi_qid.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'FI02'
TABLES
dynprotab = lt_bdcdata.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
* now go to SM35 to start the session in A, E or N display mode
* (N mode always use extended log on, whatever checkbox is ticked or not)
* There are 2 messages issued by FI02: W210(BF00) (as the bank has been
* flagged for deletion) and S207(BF00) ("bank modified")
Edited by: Sandra Rossi on Jun 15, 2010 10:06 AM
> In sample code above, I removed call to RSBDCSUB program so that we can choose the display mode in SM35 when we execute the BI session
Similar Messages
-
When you set up tracks what is best to pick for the input and output?
When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks
First part of the question I don't understand, so could you elaborate please?
Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix. -
Detailed Console Logs For the Wireless Problem
So I'm yet another victim of the mysterious Macbook wifi problem. Have been for several months.
Anyway, I dropped into console, narrowed the search to 'airportd' and tried to activate AirPort from a problem spot in the house.
6/3/08 5:22:41 PM airportd[151] No networks found on channels remembered for bagwifi
6/3/08 5:22:41 PM airportd[151] Could not find "bagwifi"
6/3/08 5:22:41 PM airportd[151] Could not find any preferred networks; trying broadcast requests..
6/3/08 5:22:44 PM airportd[151] Broadcast requests also failed..
6/3/08 5:22:45 PM airportd[151] Probing highest ranked networks via directed scan..
6/3/08 5:22:47 PM airportd[151] Error: Apple80211Associate() failed -1
6/3/08 5:23:22 PM airportd[151] Error: Apple80211Associate() failed -6
6/3/08 5:23:22 PM SystemUIServer[95] Error: airportd MIG failed = -6 ((null)) (port = 36623)
6/3/08 5:23:22 PM airportd[151] Error: processcommanddict() failed
6/3/08 5:23:40 PM airportd[151] Error: Apple80211Associate() failed -6
6/3/08 5:23:40 PM SystemUIServer[95] Error: airportd MIG failed = -6 ((null)) (port = 36623)
6/3/08 5:23:40 PM airportd[151] Error: processcommanddict() failed
6/3/08 5:23:45 PM SystemUIServer[95] Error: airportd MIG failed = 1 ((os/kern) invalid address) (port = 36623)
Just for a recap... This problem happens anywhere I go, basically when I'm not in the same room as the access point. I've tried dropping AirPort from the configuration pane, I've changed the MTU, I've flashed the PRAM more times than I can really count.
I'm not that great with the internals of these things but maybe one of you knows what exactly the error codes mean.
I've also tried using the wireless under bootcamp in Windows XP, I have the same problems. Last night I tried the latest Ubuntu Live-CD installer and the wireless problems persisted, so I'm guessing something in one of the updates messed up the hardware.
Can anyone else try to replicate this?
I called the nearest Apple store and the Genius I talked to said that I was the first time he had heard of this problem. Anyway I figure it might be useless but I'm going to make an appointment with them and try to replicate the problem in-store.Don't pay any attention to anything you see here or on the rest of the Internet, especially when it concerns Apple. What looks like "a ton" is really only a handful of people. And you have no idea what they have done to their machines. There are several million other people who have no problem at all or are smart enough to diagnose a hardware problem on their own and take it in to Apple.
What you have already done in this thread is much, much better information than the average "me too" post you will find. No one posts diagnostics. No one makes an attempt to diagnose the problem. No one make an appointment to have Apple look at the machine. I've seen it over and over again. They just want to rant.
I suspect you will be up and running while all the "others" are still ranting. -
Advice needed: what does your company log for SAP security role changes?
My client has a situation where for many years, they never logged changes to SAP security roles. By that I mean, they never logged even basic details, like who requested a change, tested it, approved it, and what changed!! Sadly their ticketing system is terrible, completely free-form text and not even searchable.
Does anyone here use Word docs, Excel sheets, or some other way to capture security role change details? What details do you capture? What about Projects, that involve dozens of changes and testing over several months?
I plan to recommend, at least, they need to use a unique# (a ticket#, or whatever) for every change and update the same in PFCG role desc tab, plus in CTS description of transports... but what about other details, since they have a bad ticketing system? I spoke with internal audit and change Mgmnt "manager" about it, and they are clueless and will not make recommendations. It's really weird but they will get into big trouble eventually without any logs for security changes!Does anyone here use Word docs, Excel sheets, or some other way to capture security role change details? What details do you capture? What about Projects, that involve dozens of changes and testing over several months?
I have questions:
a) Do you want to make things straight
b) Do you want to implement a versioning mechanism
c) You cannot implement anything technical, but you`re asking about best "paper" practise?
The mentioned scenarios can be well maintained if you use SAP GRC Solutions 10 (Business Role Management)
Task Based, Approvals, Risk Analysis, SOD and role generation and maintenance in a structured way (Business Role Management). Workflow based, staged process with approvals.
PFCG transaction usage will be curtailed to minimum if implemented fully.
Do we really want to do things "outside" PFCG?
@all:
a) do you guys use custom approval workflows for roles?
b) how tight your processes are? how much paperwork, workflow, tickets, requests and incidents you have to go through to change a role?
c) who is a friend of GRC here, raise your hand
Cheers Otto
p.s.: very interesting discussion, I would like to learn something here about how it works out there in the wild -
In 10.5 the Library Folder has a Logs Folder. What is the Google Logs for?
In Mac OS X Leopard there is a Library Folder in there I have a Logs Folder. What is the Googles Logs folder for?
The Google Logs Folder on my computer is 47GB.
I am looking to clear up space.
What are these logs?
Search logs?
What happens If I delete it?anyone?
-
When running the ISG CreateAndMaintainSalesOrders what are the required fields?
I keep getting the error:
Please provide correct Organization Id
When trying the web service call:
CreateandMaintainSalesOrders
Internal Name
oracle.apps.ont.services.oexoeord.OEXOEORDServices_DocStyle
Type
Java
Product
Order Management
I've entered on the html test form:
OEXOEORDServices_DocStyle_Service endpoint
For a formal definition, please review the Service Description.
Download the JavaScript Stub (BETA) for OEXOEORDServices_DocStyle and see its documentation .
OEXOEORDServices_DocStyle
Operation : updateSalesOrder
deleteSalesOrder
querySalesOrder
createSalesOrder HTML Form XML Source
Reliable MessagingInclude In Header
WS-SecurityInclude In Header
User Name
xsd:string
Password
xsd:string
header
Responsibility
ORDER_MANAGEMENT_USER
xsd:string
Include In Message
RespApplication
ONT
xsd:string
Include In Message
SecurityGroup
STANDARD
xsd:string
Include In Message
NLSLanguage
AMERICAN
xsd:string
Include In Message
Org_Id
103
xsd:string
Include In Message
ViewAndUpdateSalesOrderHeaderDetails
ViewAndUpdateSalesOrderLineDetailsInclude In Message
SoldToPhoneAreaCode
xsd:string
Include In Message
SoldToPhoneNumber
xsd:string
Include In Message
SoldToPhoneCountryCode
xsd:string
Include In Message
SoldTo
xsd:string
Include In Message
DefaultFulfillmentSet
xsd:string
Include In Message
SoldToPhoneExtension
xsd:string
Include In Message
QuoteNumber
xsd:decimal
Include In Message
OrderNumber
46832
xsd:decimal
Include In Message
VersionNumber
xsd:decimal
Include In Message
CustomerNumber
xsd:string
Include In Message
BlanketNumber
xsd:string
Include In Message
ContractTemplate
xsd:string
Include In Message
ContractSource
xsd:string
Include In Message
AuthoringParty
xsd:string
Include In Message
BlanketAgreementName
xsd:string
Include In Message
OrderedDate
xsd:date
Include In Message
QuoteDate
xsd:date
Include In Message
SoldToContact
xsd:string
Include In Message
OrderType
Standard Sales Order
xsd:stringI filled in the following values:
WS-Security Section
User Name = SYSTEMINTEGRATION
Password = **********
Header Section
Responsibility = ORDER_MANAGEMENT_USER
RespApplication = ONT
SecurityGroup = STANDARD
NLSLanguage = AMERICAN
Org_ID = 103
Body Section
P_API_VERSION_NUMBER = 1.0
P_INIT_MSG_LIST = T
P_RETURN_VALUES = T
P_ACTION_COMMIT = T
P_HEADER_REC
TRANSACTIONAL_CURR_CODE = USD
OPERATION = CREATE
P_HEADER_VAL_REC
ORDER_TYPE = Standard Sales Order
*** the key was the OPERATION code being set to "CREATE". Other valid values are DELETE and UPDATE -
Error when running Batch Input session for T code F.05
When I am executing Foreign Currency Revaluation using the T Code F.05, I am unable to post the documents for Foreign Loss or gain, as these GL accounts have been defined as cost Element.
Can any one suggest how to generate postings.
PhaniHi Phani,
This error could be becuase you have created the P&L gl accounts for forex gain and loss as cost element and you have not done the automatic assignment of cost Center to these GL accounts. Please do the necessary cost center assignment to T Code OKB9. Identify the PL gl accounts related to forex gain and loss and assign cost center.
Hope this solves the problem
Regards
Paul -
Runtime error when running Authoware session in Vista
Hi
One of our users has reported to a error when running an
authorware session in Vista:
"I get the message when trying to open the session...
It says:
Authorware runtime does not work anymore.."
Any ideas why this user is getting this problem?
thanks
JonI can assure of one thing.. there is no such message anywhere
in the
product. You should get the actual message from your user and
let us know
what it is.
Mike
====================
Mike Baker
Adobe Community Expert
mike-baker at cox dot net
"webacity" <[email protected]> wrote in
message
news:gfuorj$ebe$[email protected]..
> Hi
>
> One of our users has reported to a error when running an
authorware
> session in
> Vista:
>
> "I get the message when trying to open the session...
>
> It says:
>
> Authorware runtime does not work anymore.."
>
> Any ideas why this user is getting this problem?
>
> thanks
> Jon
> -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Runtime Error, when running midlet.
I can build the midlet without problems. This error occurs when the emultator starts the midlet. I can se the phone for a sec or two then i turns of and the error occurs in the console.
I am using, j2me, eclipse, eclipseme, cldc1.1,mipd2.2.
Running with storage root DefaultColorPhone
java.lang.ClassNotFoundException
at com.sun.midp.midlet.MIDletState.createMIDlet(+14)
at com.sun.midp.midlet.Scheduler.schedule(+52)
at com.sun.midp.main.Main.runLocalClass(+28)
at com.sun.midp.main.Main.main(+116)
Execution completed.
705709 bytecodes executed
5 thread switches
739 classes in the system (including system classes)
3582 dynamic objects allocated (97424 bytes)
1 garbage collections (0 bytes collected)
I am not sure about whats wrong. Isn't is supposed to be a class name the exception. like this.
java.lang.ClassNotFoundException. xxxxxxxxxxxxx
So i know in what class the exception occurs.??
Anyhow, anyone that has any clue what could be wrong?
Seems to be an error with the emulator not with the build priocess.
I get the same error while triyng to run it with ktoolbar.
thnxI can assure of one thing.. there is no such message anywhere
in the
product. You should get the actual message from your user and
let us know
what it is.
Mike
====================
Mike Baker
Adobe Community Expert
mike-baker at cox dot net
"webacity" <[email protected]> wrote in
message
news:gfuorj$ebe$[email protected]..
> Hi
>
> One of our users has reported to a error when running an
authorware
> session in
> Vista:
>
> "I get the message when trying to open the session...
>
> It says:
>
> Authorware runtime does not work anymore.."
>
> Any ideas why this user is getting this problem?
>
> thanks
> Jon
> -
How do I turn on the keyboard backlight when running Win 7 in Bootcamp 4.0?
Power Plan 2.5e does not find a Bootcamp process, so doesn't think I'm running it, and is no help. The backlight works perfectly in Mountain Lion, but I can't getit to come on at all when running Win 7. What am I missing?
Well the problem is most certainly having 2 versions Why on earth would you
do that ?
You'll have to remove both and reinstall version 4, although at this point
you probably should upgrade.
Please note: I read this Forum through e-mail. If you respond to me; please
quote, otherwise I have no idea whom your response is addressed to or the
context. This is all thanks to how this forum doesn't work properly, yet.
Regards,
S.D.A. (Stephen) -
Microsoft Dynamics AX WebSession() is null in Enterprise Portal (EP) when running from a List Page.
The WebSession() works for a detail page, but nor a list page in EP.
Does anyone know of a workaround to this issue?
Thanks.
ScottHello,
You should ask in the Microsoft Dynamics Community Forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Why doesn't Elements Premier 11 Start when running on Windows 8?
Premier 11 does not start when running on Windows 8. I error message calls for an up-dated display driver. I checked the drivers in the device manager and all report that they are up to date. What is the next step to trouble shoot?
amertrainman
I am not sure what is going on with the posting of your question.
One copy (9:32 am) has already been posted in the Premiere Elements Forum here and has been responded to by Steve Grisetti who is awaiting a reply from you.
See
http://forums.adobe.com/thread/1256735?tstart=0
Please respond to his line of questions in the link cited.
Multiple posts for the same question can get confusing for the person asking the question as well as for the person(s) try to help with an answer to get you moving forward with your Premiere Elements project(s).
Thanks.
ATR -
Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
[echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
[java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
[java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
[java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
[java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
[java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
[java] at java.lang.System.loadLibrary(System.java:1045)
[java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
[java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
[java] at java.awt.Dimension.<clinit>(Dimension.java:70)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
[java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
[java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
[java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
[java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
[java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
[java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
[java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
[java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
[java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
[java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
[java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
[java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
[java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
[java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
[java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
[java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
[java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
[java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
[java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
[java] at com.adobe.air.ADT.run(ADT.java:414)
[java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out. -
No entry in table T001P for key when running time evaluation
Hi There,
All the master data is in synch and I am getting this error when
running time evaluation.
*No entry in table T001P for key
Person rejected: xxxxxxxx*
Apparantly this seems to be config error but we have lot of EEs like this, working okay. All the master data dates are correct.
Any comment/help is greatly appreciated.
Thanks,
GajananHi,
In one of the thread i have read that, after maintaining Contract Type the issue has been resolved.
and in other thread he says
"the issue is caused by a mismatch in the employee's master data dates. Particularly with infotype 8, the first record of his basic pay had a date prior to his hire date"
Can you please check it once.
Good Luck..!
KK
Maybe you are looking for
-
Do not accept Null entry in a Query
I have this query that searches for an string within the description field and would like not to accept an empty entry, is there some code I can put to do this? Here is the query; SELECT T0.Comments,T0.DocNum, T0.DocDate, T1.ItemCode, T1.Dscription,
-
Problem installing Adobe Photoshop Elements "Shared Technologies" solved
I was contacted by Adobe Support. They remotely took over my computer. Disabled the Antivirus and Firewall temporarily until restart after installation. Then created a file labelled ADOBE. I put in the disc and they downloaded the APE 10 to the f
-
Complex Content Convertion in File Sender Adapter
Hi all, I have a flat file that I need to convert to xml' the file looks like this: Header itemHeader item1 item2 itemn itemHeader item1 item2 itemn Footer I am having problem reading the itemHeader and the items inside it.
-
How to Concatenate Date in T-SQL using custom format?
Hi: I have a column in SQL Server 2008 R2, [ENTERED_DATE]. This is a datetime, formatted like so: 2011-01-25 07:32:21.000 I need to display this as: 2011-01-01, where the DAY always = 01. I've tried all manner of CAST, CONVERT, concatenate, etc. I
-
Report_object_status
Hi all, While calling a report from Oracle Forms (10g), do we need to call the Report_object_status in a loop or should it be called just once for example : should the code be as follows 1) Report_message := Run_report_object (Report_id); Rep_status