When the cloud starts will I be able to push my music and photos to iTunes on my computer. Computer crashed and music on my phone were added from a jump drive

Will the cloud work to move my music and photos from phone back to a new iTunes act on my computer

Apple - MobileMe - MobileMe transition and iCloud.

Similar Messages

HT4527 I want to start a new iTunes acct and then transfer music and apps from my iPhone into it. The music and apps on my phone were purchased from another iTunes acct, will this work?

I'm getting divorced and need to start a new iTunes Acct. Can I start a new acct and then transfer existing music and apps into it even if they were purchsed in a different acct?

No.
Put it in the divorce settlement over who gets the account/purchases.

Any idea as to when the Apple Store will start selling refurbished iPad 4?

Any idea as to when the Apple Store will start selling refurbished iPad 4?

As of now, they have some:
http://store.apple.com/us/browse/home/specialdeals/ipad/ipad4gen

When the new version will correct the error 10.0.0? program constantly hangs. will not start!

when the new version will correct the error 10.0.0? program constantly hangs. will not start!

Are you using any VST plug-ins or audio units? Then check, if they are still compatible. You may need to uninstall them.
See this support document:
Unexpected behavior with Audio Unit plug-ins http://support.apple.com/kb/TS5249

HT201077 I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

The following is from this Apple Document: iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
You need Mt. Lion in order to use Shared Photo Streams.
OT

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?

System has begun crashing (dropping-windowshade, message to shut down computer) during attempted capture or render. Hardware has been checked out and is OK. Other OS functions seem to be working. I have a bootable clone from the most recent period of good function, and also my original install disc for FCE.
If I need to try reinstalling FCE, are the updates still available from Apple?
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files? My 3+TB of underwater clips, stored on external drives as QT movies?
Any guidance appreciated. This forum helped me out a lot when I first started - didn't expect the end to come so soon & hope there's a feasible workaround!
Thanks,
Sharron S.

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?
Yes, via Software Update
Here is an article on how to Uninstall FCE HD You could also use FCS Remover (note there are different versions depending on what version of OS X you have - be sure to select the correct version)
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files?
- FCE project files - only usable with FCE or FCP. Not iMovie or FCP-X
- All your clips, however, can be used with almost anything including iMovie, FCP, FCP-X, QuickTime, etc.

I'm going to quit iTunes match, all my music is online (non on my computer). When I come back to iTunes Match: will I be able to acces my music?

I'm going to quit iTunes match for other streaming services, all my music is in the cloud (non on my computer). When I come back to iTunes Match: will I be able to acces my music?
I'm planning to not renew my iTunes match ending soon.But when I change my mind in, say, a year, will all my music be available to me. I really don't feel like donwloading and backig up :-)
Thank you!

I don't know if Apple keeps a record of what music you had in the cloud. I am assuming that after the subscription lapses, after some amount of time the music in the cloud is deleted. So, after a year, if you sign up again you'll need to go through the process again.
iTunes Match is not a backup, and if you don't pay the subscription fee Apple is under no obligation to keep the data around.

HT204370 I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected. We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future.

I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

How do I set up cloud on my mac when the cloud option is not listed in my system preferences?

how do I set up cloud on my mac when the cloud option is not listed in my system preferences?

Welcome to the Apple Community.
If iCloud isn't in system preferences you will need to update your operating system.
iCloud is part of iOS 10.7.2 or better.

How do I Initialize a button to be enabled when the program start and if pressed then disable and gray it until a certain action is taken then comeback to the enabled state?

Hi!!!
I'm doing a program with the following buttons: Run, Abort, Repeat and Exit. When the program starts from the first time only Run and Exit button will be enabled and not disabled so the user doesn't press the Abort and Repeat button. The user has to select from a menu bar the test he wants to make then if he presses the Run button a pop up window will come up asking for the serial number and his name, and will comeback to the main program with the entered information. The user now has to press the Run button again to start the test, when the test starts the Abort button now will be enable
d and not disabled, when the test ends the Repeat button will be enabled and disabled. If the user selects new test from the menu bar the whole process will come again. I'm having problems with the menu bar because it has a time-out and when that occurs the program gets crazy. Also I'm not sure about what mechanical action I have to use for the Run. Do I need to count the times the Run button is press so the 2nd time is pressed it will be disabled. Do I need to use a sequential and where I initialize the buttons so the first time they are like I want (Inside or OUtside the while loop that ends with the Exit button) Any help wil be appreciated.

I'm not sure about the menu bar because i've never used them..i tend to go for listboxes instead.
As for the buttons, if you want to wire the button to a local variable then the button must be a switch, otherwise a latch is ok. But remember you will probably need to reset the button at the end of a run (ie. wire a constant through the while loop to the local variable for the switch). To initialize the buttons at the start, wire constants to their locals outside the main execution while loop.
Put the disabling/enabling functions in the parts of the program the button has activated. For example, you say the 2nd time the Run button is pressed you run the 'test', enable the Abort button and want to disable the Run button - put these property nodes into th
e 'test' sequence/loop.
Sequences are useful to control when you want buttons to be modified. I use them if i cant sequence the order of execution any other way. But try and avoid using multiple frames as it can get confusing if you start hiding code.
If you are still having problems, post an example of your program in no higher than LV 6.0.2 and i will try and adapt it for you.
Kim

HT4972 im trying to update my ipod touch and have transfered all my apps to my laptop when i update it will i be able to transfer them back to my ipod or not?

ive got an ipod touch and im trying to update it im using a laptop ive used for quite a while now but its coming up with the message that u get when u dont normaly use that computer. so i tranfered all my apps to my laptop when i update it will i be able to transfer all them apps back onto my ipod?

- Yes. If you also want to retain app data, connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up. Then restore from that backup. The restore will also update the iOS.
- However, what was the error message you received? Maybe we can fix that.

My macbook pro 2009, was stored in a Speck case and rubbermaid stoage tote that was left in a RV over the winter in WI that sat outside all winter. Is it ruined? will I be able to still use it and all my data? I don't currently have it with me.

my macbook pro 2009, was stored in a Speck case and rubbermaid stoage tote that was left in a RV over the winter in WI that sat outside all winter. Is it ruined? will I be able to still use it and all my data? I don't currently have it with me. I am just hoping that when I get it back it will work for me. Any tips, help, support would be helpful! Thank you!

Storage temperature is listed as down to -13º F
Line voltage: 100V to 240V AC
Frequency: 50Hz to 60Hz
Operating temperature: 50° to 95° F (10° to 35° C)
Storage temperature: -13° to 113° F (-24° to 45° C)
Relative humidity: 0% to 90% noncondensing
Maximum operating altitude: 10,000 feet
Maximum storage altitude: 15,000 feet
Maximum shipping altitude: 35,000 feet
So I would think you're OK . The battery will need a charge but I don;t see any reason why there should be a problem as long as there was no water involved.

How can I set the audio conference to automatically start AS HOST when the meeting starts?

I can easily setup an audio conference for any meeting, and set that conference to start. However, there doesn't seem to be a way for the conference to start as the moderator (or, host) when the meeting starts. This means I still have to dial in to the conference with a land line or cell phone and enter my host code to get the audio conference started.
The only audio conference provider at my company is The Conferencing Center. I don't seem to have a TCC account. What do I do to get this working? It's nuts to have to use a land line just to get the audio going.

There are a number of integrated audio providers other than TCC, and those can be enabled in the Admin section of Connect. However, using the fully integrated bridge does still require that a Host/Leader be dialled in before audio will broadcast (or something other than hold music).
If you don't want to have to call in, I'd recommend that you use Universal Voice to tell Connect the dial in steps and give it the Host/Leader pin.Setting Up Universal Voice - Adobe Connect User Community.
The downside to this is that there will no longer be a dial out option for participants.

I want to use icloud but i have a lot of music on itunes that has been downloaded from elsewhere on the internet. Will i be able to access this on icloud if it has not be bought through itunes?

I want to use icloud but i have a lot of music on itunes that has been downloaded from elsewhere on the internet. Will i be able to access this on icloud if it has not be bought through itunes?

Not on iCloud itself - what you need is 'iTunes Match' which seeks to find versions in the Store of songs you already have, and failing that allows you to upload your own copies. This will cost you $24.99 per year; it does not count towards your 5GB free iCloud space. Limit 25,000 songs (purchased songs do not count towards this limit). You will need iTunes 10.5.1 or later on your Mac or PC and iOS 5.0.1 or later on your iPhone 3GS or later, iPod touch (3rd and 4th generation), or iPad.
Please see this page: http://www.apple.com/itunes/itunes-match/
Also note that some people have found that when using this facility with songs which contain strong language, iTunes Match is substituting a cleaned-up version.

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

Most of us in this forum are users who volunteer on technical issues, and not Adobe employees although they do drop in from time to time. As users we simply have no control over activation and that's why you are not getting responses.
If you havn't done so,you might try the Muse forums and see if you can get a staff member to look into it. Have your case numbers and phone transcripts handy.
Last option is to keep calling customer service until you get someone who will help or ask for a supervisor.
Hope this get resolved,
Gene

When the cloud starts will I be able to push my music and photos to iTunes on my computer. Computer crashed and music on my phone were added from a jump drive

Similar Messages

Maybe you are looking for