When try to connect as Guest get Connection Failed - There are no shares ..
When trying to connect across home network to MacBook from a MacBook Pro when I try to sign in as Guest I get a Connection Failed error - There are no shares available or you are not allowed to access them... error. If I connect as a Registered User everything goes fine.
I can connect find as a Guest the other direction from the MacBook to the MBP; Guest account sharing is enabled on both computers; there are shared directories on both computers; there is no firewall enabled. Ideas....?
I have this exact same problem with 2 MacBook Pro's both running 10.6.5
I've double checked that the settings are identical on both machines, yet only one of the them can connect to the other using the Guest account. When the Guest account doesn't work and I use the registered user of the other machine, it connects fine. I just would like to be able to use the simple Drop Box function.
Similar Messages
-
I tried to update my iphone4, in the middle it gave an error and now when try to connect it the computer doesnt even detects it and neither does itunes
Power the phone off completely. Plug the USB end of the cord into the computer, leaving the other end unplugged from the phone. While the phone is powered off, open up iTunes, hold down the home button on the phone, and plug in the USB cord to the phone, making sure you keep holding down the home button. In about 15 seconds you should get a pop-up in itunes saying that it's detected an iPhone in recovery mode. Click 'Ok' and 'Restore'.
Your iOS update crashed and your phone is in recovery mode. The good news is that this will fix it, bad news is that unless you had everything backed up in either iTunes or iCloud, you've lost everything as your phone was wiped when the iOS update crashed. -
When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Have an ipad 2 and have bought the camera connection kit to use with my flip ultra. However when try to connect ot says there is not enough power to support accessory. Can anyone help please?
If you have ios 5.1.1 the output power is 100ma, on the iOS 5.0.1 the power output is 500ma! This may be the cause?
-
When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."
If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking. -
hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb
hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb
-
I had previously purchased Acrobat 9 Standard and am trying to reinstall on a new computer as the one it is installed on has crashed. In my order history, there is a download link, but when clicking on it , I get a message there are no downloads. Help please!
Brigids45434622 for information on how to download your purchased Adobe software please see Find a download link on Adobe.com. You may also want to utilize a different web browser if you are not being given the option to download your installation files.
-
After years of no problems I sddenly can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable. What are themes? How do I install them? Why has this problem suddenly arisen?
Re-installing does not affect your Library in any way. You don't delete it, only the app.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Regards
TD -
When I try to restore from my iCloud they say there are a problem of back up data so what can I do ?
When I try to restore from my iCloud they say there are a problem of back up data so what can I do ?
Unfortunately, nothing. If there is a problem with the backup you won't be able to use it. You'll have to restor a backup from your computer using iTunes, if you have one.
-
On receiving jpegs via email, sometimes they get corrupted, and there are horizontal blocks appearing on the image that distort the image. Help???
Hi Bruce523,
Let's get to the bottom of this, your efforts are greatly appreciated! What is the software version on your device:http://vz.to/ZVhZsh ? I look forward to hearing from you soon.
Thanks for your contribution to our community forums,
AyaniB_VZW
Follow us on Twitter @VZWSupport -
When I sync my phone with my macbook pro, there are "3,307 items that could not be synced". What do I do?
What you should do is figure out why no songs will sync:
Is there an Apple ID problem? That's the most likely reason. Maybe you haven't signed in to your Apple ID on iTunes. Maybe the Apple ID on your computer differs from that on your iPhone.
Have you been syncing your iPhone to some other computer? It only syncs to one computer.
Are you using the latest iTunes? The current version is 11.0.5. -
For itunes 10.7 it is saying that my mac need version OS X needs to be version 10.8.6 - how do i get this? There are no current software updates and i cant use iTunes for my new iphone 5
I think you meant 10.6.8, not 10.8.6
It requires an upgrade, instead of a free update.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57 -
I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?
You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt -
Wheni am tried to settle order i got error There are no accrued amounts; s
Wheni am tried to settle order i got error There are no accrued amounts; settlement is not possible.
Hi Guru,
Details of production order
Target quantity =1,063,893 Delivered quantity =1,063,893 confirmed quantity = 1,074,945 EA Basic start =07.04.2009 Basic finish =01.11.2010 TECO PCNF DLV PRC GMPS MANC RESA SETC*
When i am trying to close order system gives Error messsage
000 Unprocessed future change recs for order SS50008TT/1A prevent del. fl
000 Order SS50008TT/1A is partially confirmed
Unprocessed future change recs for order SS50008TT/1A prevent del.
flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be process
from the confirmation for the confirmation processes in order
SS50008TT/1A. Possible confirmation processes are:
o Automatic goods receipt
o Backflushing
o Calculation of actual costs
o Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status
with future change records that have not been processed.
edure
You should process the open future change records using
o Predefined confimration process or
o The CORUPROC program, by dispatching it in Customizing in
background job (dispatch background jobs: dispatching proc
Check if incorrect goods movements or incorrect actual cost ca
exist for the order, and reprocess these if necessary:
o Reprocessing incorrect goods movements
o Reprocessing incorrect actual cost calculations -
In the App Store, when you go into top charts then free column there are free apps but also payed ones
Which apps are you referring to ? If Pages, Numbers, Keynote, iPhoto and iMovie then they are free to people who have activated a device since 1st September 2013, and have iOS 7 installed on the device.
Message was edited by: King_Penguin
Maybe you are looking for
-
Would anyone have a SQL Query or a Powershell command that returns a list of all lync conferences setup for the future?
-
Hi experts I'm doing BW transports to production.. I'm getting some errors, and along with those errors the information that packages Z_INFOOBJECT does not exist in prd system. I've checked SE80, and indeed that packages does not exist in prd 1) woul
-
Oracle Tuxedo 8.1 With Oracle 11g Database
Hi, I have an old application that must be compiled with oracle 8.1 and Oracle9i Database. We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resour
-
Craigslist ad for adobe master collection pirated copy or legitimate? 65$
I found an ad for adobe master collection CS6, he says I get the disk and serial but no box or customer support but I do get updates and that is a corporate volume, he is also selling windows 7 ultimate pretty cheap.. [ad removed by moderatore]
-
Remote collector schedule scan problem.
I'm having this problem since two weeks ago: The schedule scan on the remote collector does not work, the last scan date of the devices and the timeline are not up to date. 1) the connection in "Remote Sites and Agents" is on and the "Last contact"