When trying to compile forms in solaris machine, frmcmp.sh not found error
Hi
I want to compile my forms using frmcmp.sh in a solaris machine
When I try to execute
/u15/10gAs/bin/frmcmp.sh /u15/10gAs/forms/form1.fmb user/pass@database
it throws me error that frmcmp.sh is not found
it is searching in the whatever path set in ORACLE_HOME
could you please tell me what should I do now?
regards
The following is just a SAMPLE and you may not need all of them and you will have to modify the paths to match your system.
########## Oracle Variables ##########
echo " Welcome to oracle";
ORACLE_BASE=/u01/app/oracle
ORACLE_OWNER=oracle; export ORACLE_OWNER
ORACLE_TERM=xterm; export ORACLE_TERM
ORACLE_HOME=/u01/app/oracle/product/9.2.0.1.0
ORACLE_SID=ORTD
LD_PRELOAD=$HOME/libcwait.so
export DISPLAY=172.28.66.39:0.0
PATH=$PATH:$ORACLE_HOME/bin
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$ORACLE_HOME/network/lib
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
export CLASSPATH
LD_ASSUME_KERNEL=2.4.1; export LD_ASSUME_KERNEL
THREADS_FLAG=native; export THREADS_FLAG
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
export PATH ORACLE_BASE ORACLE_HOME ORACLE_SID LD_LIBRARY_PATH LD_PRELOAD
########## End of Oracle variables ##########I recommend you dig through the installation manual for the version of Oracle you have installed and setup your profile settings based on your installation. If you still need help after that, you might want to post your question in the Database Installation forum. Once you have your environment setup, you should be able to compile your form(s).
Hope this helps,
Craig
If a response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Apr 27, 2010 8:11 AM
Edited by: CraigB on Apr 27, 2010 8:14 AM
Similar Messages
-
When tried to login WebConsole for the first time 404 not found error got
Hi All,
We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
Is there any way how to test to login to WebConsole for the first time.
Appreciate your help.
Regards,
Ameer Baba.Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra -
I have quicktime installed on windows 7, 64 bit, and then installed the 64 bit version of iTunes. Install is successful, but when I try ot run iTunes, I get an error - "QuickTime was not found". Any suggestions?
I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.
-
When I try to google websites OR even try to access my email I will be taken to a notice which states "Server Not Found" with several explanations with a TRY AGAIN button at the bottom. When I hit the try again button I am immediately taken to the web site or to my email. This happens constantly and very rarely can I access a web site or my email without this frame popping up.
This is a very generic error message.
What user you are trying to search. Are you using username, display name or email address when searching
Was any domain related changed done
What if that users tried to logon to sharepoint site.
Does this error occur with all the account when you click edit? If not, based on the error,
the user account which might be removed from Active Directory or renamed accidentally. Please have a check.
Try to follow below:
http://architectevangelist.wordpress.com/2010/12/07/sharepoint-2010-the-specified-user-or-domain-group-was-not-found/ -
TS1436 When trying to burn a cd I get "disc recording not found" why and what can I do
When trying to burn a cd I get "recording not found". Why and what can I do to change this. I do have Windows Media player loaded tried to to burn on that also but did not work.
I have the same problem as simtagman. Would you mind looking at my diagnostics?
Microsoft Windows 7 Home Premium Edition (Build 7600)
Dell Inc. OptiPlex 745
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00**********DA0
Current user is not an administrator.
The current local date and time is 2013-01-30 20:37:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) Q965/Q963 Express Chipset Family
Intel Corporation, Intel(R) Q965/Q963 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: SONY DVD-ROM DDU1615S, Rev EDS3
Audio CD in drive.
Found 12 songs on CD, playing time 47:22 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:58:33
Track 3, start time 08:07:13
Track 4, start time 11:52:03
Track 5, start time 17:18:13
Track 6, start time 20:39:28
Track 7, start time 23:42:71
Track 8, start time 28:40:61
Track 9, start time 32:44:72
Track 10, start time 37:00:26
Track 11, start time 40:09:35
Track 12, start time 43:05:43
Audio CD reading succeeded.
Get drive speed succeeded.
<Edited by Host> -
I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Page not found error when navigating in Iview application
Hi,
I have developed an application,and I am able to view a sucessfull preview of the Page as well.There are htmlb links on the page.When clicked,they navigate to the next jsp page.This iview was assigned to a user,and the portal was logged in though a local ip address.The application works fine.
In trying to access the portal though an external Url,the initial page comes up perfectly fine.However the next page,does not come up,when a link on the first page is clicked.I get initially a popup with the message:
"This page contains both Secure and Non secure Items
.Do you want to display the non secure Items."
The options on the Popup were yes,no,More Info.
When I clicked yes then I get the display page not found error.The error is:
" <b>The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.</b> "
The Information I get when I click on More Info is-
<b>Downloading non-secure content from a secure Web site
The Web site you are viewing is a secure site. It uses a security protocol such as SSL (Secure Sockets Layer) or PCT (Private Communications Technology) to secure the information you send and receive.
When sites use a security protocol, information that you provide, such as your name or credit-card number, is encrypted so that other people cant read it. However, this Web page also contains items that do not use this secure protocol.
Given what you know about this Web site and your computer, you must decide whether to continue working with this site.
If you do not feel confident about working with this site, click No.</b> "
This problem occurs only to a particular user.If I add the role to another user,and view the iview I am able to navigate without problem(there is no popup as well).Even for this User,it is happening only when,I access through extrenal url,not when I access the portal through the local IP Address.
Regards,
HarishHi,
This is a further Update.The problem described above has something to do with the roles.When some roles(cusom) are assigned the navigation occurs.Can you please let me know if there is any role related configuration with SSL.
Regards,
Harish -
Error when trying to compile HTML help
I'm using RoboHelp 7.0 on Windows XP. All of the sudden, last
week, I start getting the following error when I try to compile
"Fatal Error: Unexpected error from Microsoft HTML compiler." I've
read the other posts regarding this error and deleted the .CPD file
multiple times and tried to compile again still with no success.
I've uninstalled and reinstalled multiple times and not had any
better results. The other author in my office can check the project
out of RoboSource and compile it fine. I have it on my local drive
when trying to compile.
I'd appreciate any ideas. It doesn't make sense that is
something in the project since my other author can compile it fine.
Thanks,
NitaHi, Nita,
Do you have any other RoboHelp projects that you can try
compiling? This may help to determine whether there's something
slightly askew about this particular project — sounds
unlikely if your colleague can compile without error — or
whether the problem lies in your RoboHelp installation.
I'd also recommend that you run MJ's Help Diagnostics,
available from the address below. This will verify that all the
HTML Help viewer and compiler components are properly installed and
registered on your machine.
http://helpware.net/downloads/index.htm#MJs
Pete -
Lookout 6.1 crashing when trying to compile .lks file
When trying to compile my .lks file in Lookout 6.1, Lookout crashes. From the event viewer I get the following information on the crash:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 10/16/2007
Time: 1:19:38 PM
User: N/A
Computer: SCADA-PE-1
Description:
Faulting application cbl.exe, version 6.1.0.27, faulting module lkworks.dll, version 6.1.0.27, fault address 0x000e7377.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 63 62 6c ure cbl
0018: 2e 65 78 65 20 36 2e 31 .exe 6.1
0020: 2e 30 2e 32 37 20 69 6e .0.27 in
0028: 20 6c 6b 77 6f 72 6b 73 lkworks
0030: 2e 64 6c 6c 20 36 2e 31 .dll 6.1
0038: 2e 30 2e 32 37 20 61 74 .0.27 at
0040: 20 6f 66 66 73 65 74 20 offset
0048: 30 30 30 65 37 33 37 37 000e7377
0050: 0d 0a ..
Any assistance on correcting this problem would be GREATLY appreciated, since I will lose a bunch of work I have completed working with the l4p file.
Computer Info: Windows XP SP2 OS, Dell Optiplex GX745, 2.66GHz, 2GB RAM, Dual Core Processor
Thanks!
Jason PhillipsGeoff,
Go into your Lookout folder and look for the file "cbl.err". Open that file in notepad or wordpad and you should see where your errors are that are preventing your file from compiling.
I got so used to Lookout generating the errors when a compile failed and displaying them immediately that I forgot about checking this file.
Good luck!
Jason Phillips -
RH 11 hangs when trying to compile parallel projects.
I'm using RH11, HTML Help. Help is compiled in automatic build environment using command prompt. RH hangs when trying to compile parallel projects in different sessions.
Hi Peter,
Thanks for the quick response. Here are a few more information:
We are using RH in a build server environment, not the UI, but the RHCL compiler directly. When RH is invoked, each compiler runs in its own process.
I would assume that command prompt compilation in a build server environment is fairly common in SW engineering.
I should also mention that this process worked perfectly fine with RH9. Since we upgraded to RH11 recently, the build generation process hangs directly after issuing the RH command prompt. The strange thing is that the hang-up occurs frequently, but not all the time. There are no error messages whatsoever that could give us a hint about the reason for this error.
We suspect that Adobe has changed their sign-in process because the process stops at such an early stage.
Any ideas?
Thanks! -
My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.
If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.
-
i get a message when trying to sync..."requried disk cannot be found" even after enableing disk use
First make sure you are using the most up to date version of iTunes and have all the latest Windows updates/patches installed on your PC. From there, try again and if still no luck, make sure you are plugging your iPod into a high powered USB 2.0 port.
Otherwise try these steps:
1. Run “c:\WINDOWS\system32\devmgmt.msc” (i.e. *Device Manager*), and leave it open for now for later use
2. Start up iTunes
3. Next, connect your iPod.
4. Go to your iPod Settings and select the “Enable disk use” option from under theSummary tab.
5. A dialog box will pop up reminding you that you’ll need to manually eject. Go ahead and hit OK
6. Hit Apply to save changes to the iPod
7. Quickly switch to the Device Manager window and right-click on any item within the window and select “Scan for hardware changes”
8. Finally, switch back to iTunes, and try re-syncing your iPod to see if it helped.
It might not also hurt to trash your iPod's Photo cache if it has one (i.e. you sync photos to the iPod). See this article for information on where to find this folder on your Windows XP machine.
http://support.apple.com/kb/TS1314
B-rock -
Inner class not found error when compiling project
I tried to use 9iDS (JDeveloper 9.0.2.822) to generate applet that has textbox and button.
I inserted UI components trough UI editor and added actionlistener there.
Now when trying to compile (and run) project I get always "Class MyClass$1 not found in class MyPackage.MyClass"
This only happens if both package and class are same named. If not it works... Is this feature of java, jdeveloper or something other? (Well, actually this is not a problem because rarely packages and classes are named as same.)Also, it's probably a good idea to name your packages different than your classesMoreover, common naming conventions dictate you should never even use capitals in your package names if I'm not mistaken. Whereas class names should always at least begin with a capital.
This will help prevent a lot of confusion, both for the developer and the IDE. ;-) -
Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FDYou have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer.
Maybe you are looking for
-
HT1459 HI! I WANT IOS 7 ON MY IPOD TOUCH 4G WHAT CAN I DO?
hi i want ios 7 in ipod 4 what can i do
-
Hi, How to configure to get only the required document types for Purchase order Regards, Sattuj
-
FF_5 Bank Statement Upload Error
Hello Experts, I have a bank statement file in a specific share drive path and when I import this file using transaction FF_5, it gives the error message (FB 704) File \Accounts\ Bankstatements upl in disk drive J: cannot be opened. But I am not
-
Trouble scrolling on the main menu using my dvd player.
I can't seem to move to the scenes button when I'm on the main menu using my DVD player. This function seems to work fine on my computer. Before I burn another (very long) disc and try again, does anyone have any suggestions? Natalie
-
Hi I have my JAVA_HOME set to C:\j2sdk1.4.1_01 I have just upgraded my jdk. Tomcat now won't load anymore since I upgraded. It says that it can't load the JVM. Any suggestions? Thanks