When trying to upgrade to FF6 it crashes, and I have to delete and reinstall 5.1? what is happening?

FF crashes when I try to upgrade to FF6 and a dialogue box appears stating that a crash has occurred and please send report. When I do, I reboot only to have the same box appear. I then de-install the FF6 and reinstall 5.1 and all works again.

Have you held the power button down for 10+ seconds?  That should turn it off.
Ciao.

Similar Messages

  • When trying to add album info, it crashes and closes.

    This problem popped up after intalling 10.5. I've tried to run a fix, but it doesn't change anything. Any suggestions? It's frustrating, as I'm a huge audiobook listener and I can't transfer the disks to iTunes to then transfer to my nano. Thank you!

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • HT1349 I get an invalid signature message when trying to upgrade iTunes. How do I fix this?

    How can I I'd the invalid signature when trying to upgrade iTunes on my PC?

    Twanger317,
    Have you tried to do a repair install on the pc of iTunes? Also if that does not work i would follow these instructions on removing iTunes and reinstall. http://support.apple.com/kb/HT1923 for windows vista and 7 and http://support.apple.com/kb/HT1925 for windows xp. let me know if that helps.

  • HT6114 Air and iMac crash when trying to upgrade to Mavericks from Lion.

    Air and iMac crash when trying to upgrade to Mavericks from Lion.

    Make sure your Macs can run Mavericks >  OS X Mavericks: System Requirements
    The v10.9.2 link you posted from is not an upgrade. It's an update for Mavericks only.

  • IMac shuts down when trying to upgrade from Tiger to Leopard

    My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
    Thanks

    rk87,
    Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
    I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
    His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
    Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

  • TS3694 Hi I am getting an error 3194 when trying to upgrade my ipad 2 to IOS v 5.1, any tips?

    Any advice on the eror code 3194 when trying to upgrade to IOS v5, i cannot download the lateste version of iTunes and cannot do a restore because of this error?
    Thanks

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

    Hi,
    I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
    I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
    So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
    Thks in advance for answers.

    I think i tried all the available ones, and there are many. Why can't we
    have a definitive automatic upgrade solution instead of having to do
    such a number of manipulations ?
    Le 14/03/2013 04:41, Flex harUI a écrit :
    >
          Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
    created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
    /Flex/ - View the full discussion
    <http://forums.adobe.com/message/5146932#5146932

  • Error code 23 when trying to upgrade???

    Error code 23 when trying to upgrade/ also have lost wi-fi connection.  A coindence or related problem?

    Hi Dauby51,
    You may need to uninstall and reinstall PSE 11, then reapply the updates.
    Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
    Give this a try and let me know how it goes,
    Regards,
    Pete

  • Error when trying to upgrade scsm dw 2012 sp1 to r2

    Hello,
    when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
    does anyone faced and successfully resolved this problem?
    regards,
    Ilgar
    Regards, Ilgar Khalilov.

    This issue might happen if you have a space in the DW Management Group name.
    Maybe this blog post from Anders Asp is helpful:
    Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
    Andreas Baumgarten | H&D International Group

  • When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
    After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    Hi bahaluly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
    Get help with iOS update and restore errors - Apple Support
    Solve network errors
    Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device. 
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    Cheers,
    Mario

  • [Solved]Conflicting file when trying to upgrade node.js

    Hey there,
    I'm updating my packages and a file conflict arrives when trying to upgrade node. I was hoping someone would know how to deal with this.
    error: failed to commit transaction (conflicting files)
    nodejs: /usr/lib/node_modules/npm/node_modules/read-package-json/node_modules/normalize-package-data/lib/core_module_names.json exists in filesystem
    Errors occurred, no packages were upgraded.
    Thanks for any help!
    Last edited by Aquila (2013-12-23 17:47:23)

    https://bbs.archlinux.org/viewtopic.php?id=130138

  • HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    Well I spoke too soon.
    The update was successful, but now I cannot connect to the 3GS data network.
    Cannot get email and cannot open a page in Safari.
    +"Safari could not open the page because the server stopped responding."+
    +"Cannot Get Mail+
    +THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
    Email and internet work fine on WiFi.........no data using 3GS network.
    Looks like I will have to revert back to old OS.

  • I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

    I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

    Try popping out the SIM card and turn off the phone.
    Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
    Tell me how did you unlock your phone!?

  • I get this error message when trying to upgrade software "The Iphone update software server could not be contacted"  Can anyone help?

    I get this error message when trying to upgrade software "The Iphone update software server could not be contacted"  Can anyone help?

    I'd start with the following document:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

    I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

    You stated; " I have been successful with My Power Mac "
    A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
    Does the iMac meet the hardware requirements for Mavericks?
    Allan

Maybe you are looking for

  • Errors fresh out of instalation. Known problems? Point 1

    Hello, Having done a new installation of BPM after the new binaries were release, we found several exceptions during the first access to BPM Workspace. A restart of the soa/bpm hosting managed server "soa_server1" seemingly solved it. Did anyone else

  • Java Swing App hangs on socket loop

    H}ello everyone i've run into a bit of a snag with my application, its a simple chat bot right now but will evolve into a chat client soon. I can't do that however since my app hangs when i look through the readLine() function to receive data and i d

  • BI 4.1 installation in  Red hat Linux 6.5

    Hi Experts, we are planning to have one cluster environment in Red hat Linux 6.5. 1) Two nodes in cluster ( two red hat Linux 6.5 servers) 2) 1 server with Websphere as a web application server. From the last two years i am completely working on wind

  • LSO Content Player error

    Hi all, I have a problem when I started a WBT course in SAP Learning Portal. We are using the ECC 600. The Content Player  shows the error 404 Not Found. I don't know how to check a log of this issue. I was checking the config in the IMG, I was tryin

  • Why do clients not install anything??

    New Win2k12 R2 WSUS server, Win2k8 R2 clients detect updates properly, even appear to download them... RSOP on the Win2k8 client servers shows the proper Group Policy and GPO are applied to the client. The clients can readily access http://wsus:8530/