When was a SCHEMA last analyzed?

Hi all,
How do I know when was our PROD schema last analyzed?
Thanks

843228 wrote:
If I run EXPLAIN PLAN to check my slow running my sql query, is it mandatory that my schema should be latest analyzed? as in today.No. If you want the optimizer to generate an accurate plan, the object statistics need to be accurate. For a mature system, the fraction of rows in a given table that change in a single day is generally quite small so object statistics on most objects in most systems are likely to be accurate for relatively long periods of time.
Justin

Similar Messages

Is there a way to check when was my phone last used?

My apologies for the very unusual question.
My question is simply to know if there is a way to find out when was my phone last tuned on or used.
Basically i left my business at a place with a lot sensitive work data and i have a great feeling that it has been accessesed. So if anyone can help me if there is an App or a service that would allow me to find out the time stamp of the time and date of the access or even better which apps were accessed.
Thank you for your time and brain.

While this is not all you are asking for and may not be helpful, in Settings > General > Usage, you can find the number of hours since the last charge, and how how much of that time was standby. Total minus standby should be the total time someone was using it since its last full charge.
I do not know of any built-in function, however, to show all of what you are asking for.

Trying to find out when was the object last referenced?

Hi All,
Is there a way I can find out when was an object or all the objects in a schema were last referenced along with the time it was referenced (May be a standard code all_references as such)? Just want to find out if there are any dormant objects. Thanks for the help,
Reddy

Hello,
No.
You can query user_dependencies and compare to all_objects, but this will only show you objects that have no direct dependencies. You will not be able to identify objects used only by e.g. shell scripts or a JAVA application.
Regards
Marcus

Query to find when was Receive location last modified

How can I find the date when was the receive location configuration last modified?

You need to query the BizTalkMgmtDb database to get details.
select DateModified from BizTalkMgmtDb..adm_ReceiveLocation
where name='XXXX'
Replace XXXX with your receive location name.
HTH,
Rachit

Query to find when the given schema last refreshed ?

I need to find out the given database schema, when did last get refresh using impdp or import or SQL Loader?

If schema refresh is carried out by dropping schema then Created column in DBA_USERS will show your answer.
Else if its carried out by dropping the tables, then you can check the created and last_ddl_time in DBA_OBJECTS
Select username,created from dba_users where username='U1';
SELECT OWNER,OBJECT_NAME,CREATED,LAST_DDL_TIME FROM DBA_OBJECTS WHERE OWNER='U1';
Please keep forum clean by Marking your Post as Answered or Helpful if Your question is answered.
Thanks & Regards,
SID
(StepIntoOracleDBA)
Email : [email protected]
http://stepintooracledba.blogspot.in/
http://www.stepintooracledba.com/

When was an item last used in Keychain?

I am trying to clean up the entries in my Login keychain. A lot of the entries (passwords, certificates, etc) are cryptic, and it's hard to know what they are. Is there a way to find out when an entry was last used? When I say "last used", I mean last accessed by an application. I do not mean last modified. Thx

I don't know that there's an easy way to figure that out, but for certificates, you can look at the expiration date. Any certificates that have expired can be deleted, as they're of no use any longer. Passwords can simply be weeded out if they're no longer useful. And, of course, you should be able to reset the entire keychain without too much hassle, beyond re-entering passwords and restoring any important certificates that you have added.

When was iBook G4 last updated?

Hi all,
I have a 12" G3 iBook that is almost 5 years old and would love to update to a new 14" G4 iBook. I was just curious as to when the iBook line was last updated and a guesstimate on when the next update will be. I know that would be speculation so just an approximate time is fine.
Thom

The current iBook 14-inch was introduced on July 26, 2005:
http://everymac.com/systems/apple/ibook/stats/ibookg4_1.4214.html
It is assured that every new Mac that is introduced from here on will have an Intel processor. It is likely that we are seeing the end of the line for iBooks. They will have a new name that includes "Mac," according to the announcement at the Macworld keynote address. (PowerBooks are being replaced with the MacBook Pro.) The entire Mac line is to be converted to Intel processors by the end of 2006, again according to that keynote address.
Classic (OS 9 emulation and applications) will no longer be supported in any Mac with an Intel processor. I don't know if that matters to you, but thought I would let you know.

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize. Can anybody help? Basically LR is useless, it has been nothing but problems.

It would probably be better to continue your previous thread on the same question than to start a new one.

When was the last time a program was run?

Experts, is there a way to know when was the last time a program was run (particularly, Z Program). We are trying to identify obsolete programs and avoid working on those programs that weren't touched for more than 3 years during our next upgrade. How can I find this? Any suggestion would be highly appreciated.
Thank you.

Hi,
One way is to check TRDIR table(se11/se16) and display it. In the next screen once you will get 'Data Browser Table TRDIR' selection screen. There either you put the individual 'Z' program name in the 'Name' field & execute it or for all multiple entries execute it.
Once you execute it with the particular Z prog. name then you will get the required details like CDAT(Created on),UNAM(Last changed by),UDAT(Changed On),SDATE(Standard selection screen generation: Date),IDATE(Selection screen generation: Date) etc.
Hope this can help you.

When can i see when was the last MRP had run?

Hi All,
as per my understanding in MD03 we first run MRP & then we can see the list in MD04. so suppose now some MRP relevant parameters are changing then unless we run MD03 again , these changes wont reflect in MD04. is it correct?
now i want to see when was last MD03 was run, then where can i see this?
any help will be highly appreciated.
Thanks
Anubhab.

Hi Anubhab,
For MRP run there are several transactions usefull for bussiness requirement.( MD01, MD02, MD03,MD50 etc)
so when ever there is any change in MRP relevant parameter, entry in planning file will happen and it will be executed in next MRP run,
You can see the date and time of last MRP run in MD05.
Hope it help you
regards
Ritesh

When was the last log in of user X?

Hello!
I would like to know, whether it is posible to get the following information via tcodes e.g. SUIM:
<b>When was the last log in of user X?
Which transactions does the user use?</b>
Thank you very much!
regards
Thom

Hi
In SUIM u can find the user and the last logon along with date and time stamp
and regarding the tcodes
There is no standard transaction. The information is available for configurable time periods using transaction ST05N but it is not organized to readily provide a report of users and transactions. Also the information available summarizes a user's use of a transaction. There will be one entry (with count data) per user per time period. Daily, weekly and monthly summaries can be created and they are stored for configurable durations.
The information is summarized into a cluster table called MONI based on the STAT files that are written in the file system and regularly refreshed. MONI cannot be queried via SE16 etc., but SAP delivers a number of function modules that retrieve data from these tables.
It is also possible to configure audit logging via SM19 and read the log files via SM20. This will provide more detail but it also introduces new file management issues and requires a change to system settings.
Reward me the points if useful
Regards
Sreenivas

100% bonus trade in video games, when was the last time? When will it be again?

Just curious as to when was the last time the 100% bonus trade in was offered and when it will be offered again? Even at 50% bonus trade in, ill be somewhat satisfied.
Thanks

Hey OKCThunder,
We aren't able to provide info on upcoming promotional events or sales, so the best advice I can give would be to keep an eye on BestBuy.com, our weekly ad, and the My Best Buy site for future offers.
Thanks for your interest in our Trade In program!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

How to find out when XI Server was Re-started Last ?

Dear Experts,
Can anybody tell me How to find out when was the last time XI server was Re-started. ? I want to know both ABAP as well as Java instance. without taking the help of basis.
Any T-code or Log which can give me this info.
Regards,
Umesh

Hi Umesh,
This can be one idea to check for last restart of server.
Goto Tcode sm21 and filter by date range and press the tab Reread system log if you see a continuous yellow triangle in Priorty column and the text details are like Stop WorkprocXX, PID XXXX that means the server was down at that time.
and if again you see the continuous green lights with the text like Start WorkprocXX, Pid XXXX
The time corresponding to these messages gives the time and date of the last restart of the XI server.
Thanks!

When was a SCHEMA last analyzed?

Similar Messages

Maybe you are looking for