When watching Netflix On my ipad i can't seem to get airplay to work (apple TV)

I've used Airplay before on Netflix and transferred to Apple TV but all of a sudden it doesn't seem to work. Note: I was able to get music to play on Apple TV however...help. Do I have something disabled?

You are making perfect sense...that could be why it doesn't work...I thought it was something i was doing wrong??? Like I said I thought I'd done it before so I was trying to figure it out.

Similar Messages

HT204291 I can't seem to get AirPlay to work on my iPads, works fine on my iPhones on the same network, any suggestions?

I can't seem to get AirPlay to work on my iPad's, it works fine on my iPhone 5's on the same network, any suggestions?

http://whirlpool.net.au/wiki/three_email
Have you tried contacting your ISP for support? Can you confirm that the email is suppose to be over Port 110 and not 143, or 995/993?

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

I am attempting to transfer my contacts from my Android phone to a new Lenovo Yoga 2 computer via the intouch app and I can't seem to get it to work.

I am attempting to transfer my contacts from my Android phone to a new Lenovo Yoga 2 computer via the intouch app and I can't seem to get it to work.

Maybe I'm not understanding but it appears that your question refers to a transfer from a non-Apple phone to a non-Apple computer. If that is correct, this forum is likely not the best place to get an informed answer.

HT1277 I can't seem to get gmail from my apple mail account. I have removed the account and added it, but it says I have the wrong password. I close gmail and get in just fine. What's up?

I can't seem to get gmail from my apple mail account. I have removed the account and added it, but it says I have the wrong password. I close gmail and get in just fine. What's up?

I meant that I sign out, sign back in ok. Ergo, I know my password. Someone here on the support page (you?) told me the culprit is the 2 step verification process which I had on. That makes a lot of sense as Apple mail won't get a code thereby jamming up the process. I could not even start a new account until I took that 2 step process off. Everything fine now thank you.

Hello please can you tell me how to set up AirPlay as I can't seem to get it to work!

HI I've recently brought a Apple TV tired to set it up yesterday to watch cartonn hd but can't seem to get it to play on my TV am I doing something wrong?
aany help gratefully received

Hello Pepsimax1972,
Thank you for using Apple Support Communities.
I see you are having difficulties in getting your Apple TV to play on your TV. The following article provides some basic troubleshooting steps to help you sort out what might be going on.
Apple TV: Basic troubleshooting - Apple Support
Regards,
Jeff D.

I can't seem to get my iCloud working between my iPhone and iPad

My wife and I recently purchased (in This order) an iPad, then 2 iPhones, then a second iPad. My iCloud on my devices is working fine. We are having trouble getting my wife's to work. I checked again, and was sure I had done what I was supposed to do to set hers up. She had her iPhone for a week or so before we got her iPad. We may have registered the phone with one Apple ID, and the pad with another. How can we get the two in sync?

Hi
So the problem we are working on is just your wife's iPhone nad iPad right?
It sounds like you have a pretty good handle on the detailed screens.
I think the key is to log out of your devices and then sign back in with only ONE ID on each device.
Let's start with
1. Settings
2. Itunes and Apps stores
3. Tap on the Apple ID (willlook like your wife's id).
4. Tap sign out
5. Enter your preferred Apple id and password
6. Tap sign in
7. Check Settings> iCloud... should be the correct iCloud Id now (and greyed out)
Do this on each device.....

New iMac...trying to set up sound recording form the internet but my microphone isn't working for facetime. I have soundflower installed...recording into Adobe Audition. Can't seem to get them all working...any help?

I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
Frank

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

I have the new iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to get it to work....

I have the iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to do it, any suggestions??

Make sure you have selected to sync your entire library, or have checked the songs you want to sync. This might help: http://support.apple.com/kb/ht1351

I have recently found out about the recall on the nano version1 which I have. I can't seem to get anywhere on the apple site to sort it. It is a plastic front and metal back ipod. Can anyone put me in the right direction to sort out. Thanks

I have been passed from pillar to post by apple to find out if my nano version1 is on the recall list. But as of yet I still can not find or get a answear. Can any one help me out please.

Many thanks. I have used this link all week a few times a day and once I have put in all the details etc and press submit I just keep getting a error on this link message. I have been to customer support and redirected to a Greek site then a Dutch site!!! Strange but true. I have also gone to the support link for my registered products clicked on the iPod nano I have and the support says it is out of support and I would need to pay xxxx to have a new warranty. I know this but the nano will be sorted outside of the warranty if it is one that has the faulty battery. So where do I go now. Arrrrr I thought this would be so simple. Thanks anyway.

HT1879 I downloaded an audiobook on my ipad but can't seem to get it onto my iPhone. Can somebody tell me how to do it?

I purchased an audiobook on my ipad thinking it would download to all my devices but I can't get it on anything else but that ipad. How do I get it to my iphone?

This is a ridiculous policy and it interferes with how most people would listen to an audio book since they are quite lengthy. I'm traveling, so I throw the audio book on using my iPad and I get 60% of the way through the book on my trip. I come home, I want to listen to the rest of it via iTunes on my stereo through AirPlay. And this can't be done?
This is the last audiobook I buy from iTunes until they *fix* this... and it IS something that requires fixing whether that means negotiating more aggressively with the audiobook providers or changing something at the software layer. It completely ruins many peoples' experience!
It's funny because a friend of mine suggested buying it, then downloading it from a torrent just so I could use the book the way I wanted to use the book. Is it not sad that to create a positive overall user experience you have to resort to downloading something off a torrent?
iTunes is supposed to make things easy and accessible. I agree with jamusick's posting -- this isn't the vision Steven Jobs had for the future. This is a road block on the way there.

Snap to beat markers: I'm using iMovie 11. Trying to prepare short movie of holiday using 2 or 3 songs and snap to beat feature. It worked great for first segment/song but I can't seem to get it to work for the second song. Help please.

I'm using iMovie to prepare a short holiday video. Snap to beat markers worked great for the first song but doesn't seem to work when I try to extend my project with a second song and more video and stills. I dragged in the song and marked the beats but when I bring in stils and video clips they just ignore the beat markers. Can anyone help please. Thanks.

I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this.

Can't seem to get VPN to work ... how difficult can it be?

Okay. I'm a Mac IT professional, but have never had the need to do VPN for a client until now. The client has a Mac Pro server running 10.5.6 Server Unlimited. The router is a brand-new Apple Airport Extreme base station doing DHCP and NAT from 10.0.0.2 to 10.0.0.200. The server is set to 10.0.0.250 and the base station is forwarding all inbound traffic to the server at 10.0.0.250 (DMZ). Access from the outside for AFP, ScreenSharing, Server Admin, Workgroup Manager, etc -- all working.
The server has a domain name of "server.client.com" and the server is running Open Directory, Kerberos is running, and all DNS info seems correct.
When I turned on VPN, I enabled L2TP over IPsec and entered 10.0.0.201 as the beginning address and 10.0.0.210 as the ending address since they are out of the DHCP scope of the Airport Base Station. I also tried 10.0.1.201 to 10.0.1.210. I have PPP Authentication set to MS-CHAPv2 and on my client computer (MacBook Pro running 10.5.6) I configured the client authentication to "password". I've confirmed that I'm entering the correct password, and I've also tried Kerberos authentication. I will point out, however, that when I open Kerberos Utility on my client workstation, it is unable to get a Kerberos ticket from the server. Not sure why. I know I've typed the "shared secret" correctly on both computers because I'm just using a simple word for now while configuring and testing the service.
I've tried turning off the firewall just to be sure that it's not blocking my connection.
When I look at the Overview tab for VPN, it shows that L2TP is running. When I look at the log for VPN service on the server, it doesn't show anything.
Apple's tech specs on the base station in question list compatibility for VPN with the following info "NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels)"
Does the server need to be running DHCP in order for VPN to work? And if so, can I continue to have the Airport Base Station do DHCP if the server is doing it? If the server needs to run DHCP, I'd prefer to have it run DHCP just for the VPN clients and not the rest of the network.
Am I missing something?

Does your server have only one interface?
I've never seen the VPN software work in this configuration. Usually you have one public interface (where VPN clients connect to) and a separate internal interface (where the secured systems are).
I don't know if it's possible to run in this way given that all incoming VPN connections will appear to come from a LAN address (thanks to the NAT router), and you wouldn't normally have a LAN client connect via VPN to the server to talk to devices on the same LAN.
Apple's tech specs on the base station in question list compatibility for VPN with the following info "NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels)"
That doesn't matter - it relates to OUTgoing connections from clients on the LAN to remote VPN servers, not incoming connections.
The other place to look is in the router - make sure the relevant ports are being forwarded to the server. If all ports are (as you say) then this might not be an issue (although I seriously question the sanity of running your network this way).
You should also run a tcpdump on the server looking for traffic from the client. That will tell you whether the connection is even getting to the server.

I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

When watching Netflix On my ipad i can't seem to get airplay to work (apple TV)

Similar Messages

Maybe you are looking for