When Will Microsoft Fix The Problem With Hosted Networking on a Surface Pro 3?
Surface Pro 3 512GB
Windows 8.1 with all patches.
The following is from this thread:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/netsh-wlan-start-hostednetwork-not-working-on/f414cea9-c110-483c-a3a2-840a4ce317e2?rtAction=1423330004507
A Microsoft member said it would be better to raise it in technet.
netsh wlan set hostednetwork mode=allow ssid=test key=12345678
The hosted network mode has been set to allow.
The SSID of the hosted network has been successfully changed.
The user key passphrase of the hosted network has been successfully changed.
netsh wlan start hostednetwork
The hosted network couldn't be started.
A device attached to the system is not functioning
One of the comments in the thread said:
"I have the same issue on a Surface pro 3.
It is related to the fact that they removed VAP support from the wifi driver."
Now a new wifi driver was included with the latest firmware update (01/15/2015) but it did not fix the problem.
I
Please note this is a Surface Pro 3 problem as it works on a Surface Pro 2 running Windows 8.1.
This problem has been reported to Microsoft by me and I was told "the developers are working on it." That was six months ago. I see posts going back a year saying the problem was reported to Microsoft Support.
When will this be fixed?
On Sat, 7 Feb 2015 18:06:38 +0000, saberman_Plus_1 wrote:
>This problem has been reported to Microsoft by me and I was told "the developers are working on it." That was six months ago. I see posts going back a year saying the problem was reported to Microsoft Support.
Do you have a case number? From
http://answers.microsoft.com/en-us/surface/forum/surfpro2-surfnetwork/how-do-i-get-the-wireless-hosted-network-feature/03657fe5-b8c1-48c5-940a-ae3e13ffe25f
you've had a couple of contacts with support.
If you provide case numbers, it would be helpful in escalating further. And more
specifically, it might help someone from Microsoft determine IF the issue has
been escalated. While Microsoft has been doing work on the wifi driver for
nearly the entire time since the SP3 was released, there is no information
anywhere as to whether this bug is known or not.
As you also know, I sent it in to the"right" people inside Microsoft and as you
also know, I did not get a response. (I'm an end user just like you even though
I'm a Community Moderator on the Surface Forum in Communities).
-- Barb Bowman
Similar Messages
-
When will Apple fix the problem with Freezing from the new upgrade??
I've had it.
Everytime I try to burn or back up my iTunes songs the whole program locks up as soon as I click on any of the brun or back up icons. Haven't been able to find any answers to solve my problem here although Apples tech support insists on looking here. Come on Apple what gives??No one here would know that. An announcement would need to come from Apple.
-
Smike47's problem is not isolated. We have same problem. When will Adobe fix the problem?
Adobe Acrobat 8 Professional Registration Popup occurs every time Adobe is opened.
Tremendous waste of time/money.
Come on Adobe. You are smarter than this!
Gezzi83OK, one important point of information you did not provide was the subversion of AA8. If you are using AA8.0 for instance, you have a lot of updates to do that may very likely fix the problem. It seems to have been resolved a long time ago for others (I have not heard about his in about 2 or more years) and the updates may resolve the issue. Version 8 is about at 8.4.3 as I remember off hand -- in any case a lot beyond 8.0.
-
When is Apple going to fix the problem with external hard drive not working on Lion?
As for everyone else external hard drive does not work with Lion.
When will Apple fix this problem. Do they just ignore the customer : (Copy off all your data off the NTFS formatted drive to another drive
Open Disk Utility in the Applications>Utilities folder
Select your external NTFS drive on the far left, should have the drive makers name, a ID perhaps plus the word "media"
Click the Partition Tab, click the big box and click 1 Partition
If you want a Mac only drive > Option: GUID >format OS X Extended (Journaled)
If you want a Mac/PC drive (for over 4GB sized files) > Option: MBR > format exFAT
If you want a Mac/PC drive (for the most compatibility with other devices, Win XP, but only under 4GB sized files) > Option: MBR > format MSDOS (FAT or FAT32)
Give it a name and click Apply.
You can also search Microsoft for a free exFAT download if you have Win XP.
https://discussions.apple.com/message/16276201#16276201 -
Hey Apple when are you going to fix the problems with IOS 8.3??
Hey Apple when are you going to fix the problems with IOS 8.3??
Message is working weird.
I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
If there's a fix coming when will we see it?
(I'm using iPhone6 plus)
I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!I have a Verizon iPhone 6 and am having none of those problems.
SueMac wrote:
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-… -
iTunes needs to fix the problem with there iTunes cards not activating properly! This is not the retailers fault and they will not return iTunes cards that have had the code area scratched there for apple needs to credit and or activated the cards there is thousands of people having this problem please bite the bullet and fix it already I will not be using iTunes until this is corrected...
If you haven't received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
WHEN or HOW to fix the problem with Thunderbolt/Side screen problems
WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.
Hello, might it be Video card related?
See if yours is on the recall list...
iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
http://xlr8yourmac.com/
http://support.apple.com/kb/TS5167? -
Has Apple fixed the problem with 4G cellular connection?
Has Apple fixed the problem with 4G cellular connection on the iPad 3?
Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question. -
I have Elements 12. It's an upgrade in most respects from the old CS2 I used for years. Except there is apparently no measuring tool. How can this be; is there a plug-in, or will Adobe fix the problem? Anyone know a way around this glaring omission?
Hello again. When I said PSE 12 was an upgrade on CS2, I meant that simply from an informal point of view - and it is: it's better software in most respects. In expert mode, the features and functions are much the same as in the CS2 I had before, but enhanced and slicker. Less 16 bit colour depth and a few other things of course. Unfortunately, as it now transpires, the "few other things" has turned out to include the measuring feature.
Thanks for the work-around - only problem is ... to what Info Panel are you referring when using the line tool? I've looked around but can't see the line length being shown anywhere. Thanks in advance for any light you might be able to cast on it.
Incidentally, I upgraded my written-off Canon D5 MK II with a D6. To me it's an upgrade - it's a much better camera - though by the letter of the law, the strict upgrade path would be to a 5D MK III. One can use the word "upgrade" in this informal (but entirely meaningful) sense, I hope, without being sent to prison!! -
I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?
- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store -
For two weeks I have tried to use your automatic download of the latest version 4.0.1. It would sit there telling me it is trying to connect to the download computer for hours, several times overnight. Then, it became non-responsive and error messages were sent to Microsoft who directed me to your download site. After downloading your latest version several times, the new page would open. After selecting a bookmarked site, it would open (sometimes only partially) but when I tried to scroll down, it would freeze up and become non-responsive, again prompting error messages to Microsoft. They must be getting a kick out of this. I'm running a Gateway 7200S desktop with Microsoft XP and Intel single range Pentium 4 processor. I have been using your Mozilla Firefox as my default browser for several years with much satisfaction. Unfortunately, whatever upgrades were made have rendered it useless for me.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple? -
I have a Macbook Pro with iphoto '08 running on Mac OS X version 10.5.8. I used to be able to go to my pictures folder on my HD and access my pictures via that iphoto library folder. There used to be a small arrow next to the iphoto icon with all the albums then listed within the folder (to the right). That arrow is now gone and all I have is the iphoto application icon which just reopens iphoto when I click on it, but I want to be able to access the data files. Somehow I do have files btwn 2008 and 2009 but it hasn't created these since then...Could someone please help me to restore this ability? I have read other similar posts but they seem to be related to lost data all together and I do luckily have all my pictures in iphoto still. I just can't access them in the pictures folder which means I can't access them on my external hard drive. I am now out of start up disc space somehow so I figured I had to delete some albums (I have 12,090 pictures) and do have them backed up but want to make sure I can go back for them when I need them. I did export all the pictures to a folder on the hard drive but it is all 12,090 in one long list with only numbers as names and not in any order, this will be a nightmare to access later! Please help! Thank you!
You can’t open your current photo library using this version of iPhoto.
That indicates that that is your library. Put it in your Pictures folder if it already isn't there and make sure it's named "iPhoto Library". It should look like this:
Now launch iPhoto with the Option key held down and select that library to open. If you get that same message close iPhoto and try the following;
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Where can I find the update to fix the problem with the trackpad acting up?
My trackpad has been acting up lately, with the arrow going everywhere by itself, and not being able to control it. I googled and found that it's a common problem for the 2011 Macbook Pros, and that Apple had released an update to fix the problem. Where can I find the update on the Apple site?
If an update is available, it will appear when you select Apple menu > Software Update...
But you should also read this support article:
Portables and Magic Trackpad: Jumpy or erratic trackpad operation -
QT 7.4.5 did **not** fix the problem with some .mp4s
It has been 3 versions now - 7.4, 7.4.1, 7.4.5 - since Apple broke the ability of QuickTime Player to play some .mp4 files. Apple says it is because they have some kind of malformed headers, yet they play fine in iTunes. So why can't QT Player play them, and some people report they have problems when put into Keynote?
Apple has broken functionality for lots of users. Time and again this bug has been brought to their attention. It apparently is a design decision not to fix this, and it is a big disappointment.The story so far:
If you are having problems playing MPEG4 video in Quicktime 7.4 (and Apple are aware that some users have had such problems) you should carefully check in
/Library/Quicktime and
/Library/Internet Plug-ins and
Home/Library/Quicktime
to check whether you have any third party plug-ins that are not completely up to date.
Current versions of Flip4Mac and DiVX and Perian do NOT cause failure alone or in combination. However the one SPECIFIC extension that ALWAYS causes the failure alone or in groups is 3ivxMediaImp. All other 3ivx extensions DO work. Remove only that ONE SPECIFIC extension.
Please try this and see if it fixes your problem with QT Player, the QT Firefox Plugin, and iTunes not playing MPEG4 files (including mp4 files).
Older 3ivx and DivX components are often incompatible with new QuickTime versions and are, in many cases, obviated by component packs like Perian.
This is not the only explanation for issues with MPEG4 file playback in QuickTime 7.4 and later, however. The issue with videos from democracynow.org and others, for instance, is the result of that content not complying with MPEG4 standards (namely that they use bogus track dimensions). QuickTime had previously ignored invalid track dimensions but this was changed in order to support properly authored anamorphic content.
The recent update to QT 7.4.1 fixed a number of issues but some problems are unavoidable when working with non-standards compliant content. The standards are important for many reasons including keeping hackers from manipulating improperly coded web pages.
A further problem was the fact that the developers of iSquint conceded that in many cases, the files do not play because they have been created in a non-standard way (the tool used to create them was broken). They have therefore included a Debreaker as a part of the latest version of iSquint. If your files are of this type, then you can run them through this app without having to downgrade QuickTime. This could save you a lot of hassle!
http://www.isquint.org/getit.php
However, in other cases, there is a workaround (also the basis for why those files will still play in iTunes): there are a few ways to trick QuickTime into ignoring the invalid track data. For instance, rename the files .3GP and they'll show up just fine.
Post back if you want a list of the plug-ins you should have in order to play pretty much anything in Quicktime.
The recent (mostly security) update to Quicktime 7.4.5 has not changed the situation as described.
Maybe you are looking for
-
This question is admittedly a little complicated. The New York Times website has a number of weblog pages which include brief stories followed by space for readers to leave comments. You probably need to be a Times On-Line subscriber to really see wh
-
How do I find out how much space OSX and applications are taking up on my HDD?
I am thinking of moving my OS and all applications to a SSD to free up space on my MBP. My question is how do I find out how much space OSX and installed applications are taking up on my HDD so I know how big the SSD needs to be? Also, what is the b
-
Login issue in OIM11g due to oim credsmap error
We have OIM 11gR2PS1 installed on unix box. We have AD connector 11.1.1.5.0 installed on it .Also,peoplesoft recon connector PSFT_ER-11.1.1.5.0 is installed In our scenario,we have webservice code in which using recon event we are creating users in O
-
Why can't I swap my PC serial for a Mac one?
Hi, Hoping this is the correct place to ask this question. My company purchased Creative Suite 3 and 2 x copies of Photoshop CS3 a few years ago - they have been in use until recently. We have since upgraded to Mac's for design purposes; I de-activat
-
Flash Photo Gallery Template 3 for CS2
I am trying to build a flash photo gallery using template #3 from Photosho CS2. I can not figure out where in the scripting the wmode=transparent param goes. The swf is embeded using a script. gallery is located here: http://www.depasqualeacademy.com