WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

Hi, Jordan -
Welcome to Apple's Discussions.
If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

Similar Messages

I suddenly cope with latency, how can I fix this?

I suddenly cope with latency, how can I fix this?

The Gift Card can only be Redeemed in the Country of issue...

This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
Max

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try a few times to get it to work

When I send my imessage sometimes it tells me that my message is sent as a text message as oppsed to an imessage and then doesnt tell me if its delievered. It just started doing this last night.How can I fix this?

When I send my imessage sometimes it tells me that my message is sent as a text message as oppsed to an imessage and then doesnt tell me if its delievered. It just started doing this last night.How can I fix this?

This feature only works with people who have iMessage on their iPhone. If you are sending a text to someone with a blackberry etc, you will not get the delivery messages.

I have a ipod and it needs to be activated, but my brother used it and he gave it back to me and moved away i cant get in contact with him how do i fix it ?

i have a ipod and it needs to be activated, but my brother used it and he gave it back to me and moved away i cant get in contact with him how do i fix it ?

You are running into
Find My iPhone Activation Lock
Can yo get your brother to do this:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Are you the original purchaser and have proof of purchase? If so them Apple can help.
Apple - Support - iTunes - Contact Us

Before Mac OS X lion install I had over 50% free hard drive space on new MBP, but now my hard drive is full without me doing anything! How do I fix this??? Or should I just revert to Snow Leopard???

Before Mac OS X lion install I had over 50% free hard drive space on new MBP, but now my hard drive is full without me doing anything! How do I fix this??? Or should I just revert to Snow Leopard???

Sounds like the Time Machine Local Backup. Try turning Time Machine Off in System Preferences to verify.
See: OS X Lion: About Time Machine's "local snapshots" on portable Macs
But, your real problem is
I forgot to mention that I tried to use Disk Utility to Verify Disk, but it cannot. I get red errors that say the MacHD is corrupt and needs to be repaired. It says that in order to do this I need to use the Disk Utility on the install disk, but Lion doesn't have one!
Boot into Lion's Recovery (Hold ⌘R on Boot), select Disk Utility and then select Macintosh HD and click [Repair Disk]
Tony

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

When i restore my phone it comes up with error1015 how do i fix that?

when i restore my phone it comes up with error1015 how do i fix that?

Brand Thunder software isn't viewed very favorably around here, due to it including "extras" such as you are seeing.

I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.

I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.

Can you select them with "Arrow left" or "arrow right" key on your keyboard?

I have been unable to sync my phone with itunes - how can I fix this?

When I link into itunes, I am told that my phone is not registered. I have had my phone for less than 6 months. It worked through the itunes up until May and then I was unable to get it to connect to sync with itunes. I am able to buy products but not share with my other devices. How do I fix this?

The actual error message reads : This Iphone can non be used because the Apple mobile device sevice is not started.

Hi everyone, I shared a photostream album with my family. They received the invitation, the folder is on their photostream device but NONE of my pictures are in their album.. How do you fix this so that my pictures in my shared album shows up ? Thanks

Hi everyone, I shared a photostream album with my family. They received the invitation, the folder is on their photostream device but NONE of my pictures are in their album.. How do you fix this so that my pictures in my shared album shows up ? Thanks

Hi mrmrscamp,
If you are having issues with your Shared Photo Stream, you may find the following article helpful:
iCloud: Using and troubleshooting Shared Photo Streams
http://support.apple.com/kb/TS4379
Cheers,
- Brenden

When I open my itunes it shows me two sides one is iTunesU and the other side is Podcasts and I can't connect with iTunes.How can I fix it

When I open my itunes it shows me two sides one is iTunesU and the other side is Podcasts and I can't connect with iTunes.How can I fix it?

Hi emzigal,
Thank you for using Apple Support Communities.
Take a look at the following article to make sure that you are not missing any steps necessary for downloading past purchases.
Download past purchases - Apple Support
Cheers,
Jeff D.

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

How do I fix all of the lightboxes being open and unable to click off?

I've built a site in Muse ans exported it as HTML and everything looks great except all of the lightboxes.
It works fine in preview, however when live and in browser, all of the lightboxes are active and I can't click off of any of them.
Would love any advice on how to fix.
http://www.ktoo.org/firstfriday/index.html
Thanks!

The permissions are improperly set for the images and scripts folders on your server.

WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

Similar Messages

Maybe you are looking for