Where are data exported with /CPMB/EXPORT_TD_TO_APPL?

Hi all,
When I use "/CPMB/EXPORT_TD_TO_FILE I find my file in UJFS. But could you tell me where the data are exported when I use /CPMB/EXPORT_TD_TO_APPL ?
regards,
Alex

application file system.  You need to supply the correct directory on the application server.  You will then see the file in transaction AL11.
Cheers,
Rich Heilman

Similar Messages

  • Where are device export jobs managed?

    I created a scheduled device export job from the CS/Device Management/Device summary page to run daily and create a csv file. This ran fine for several months, but then seemed to stop. I think we had an issue with the jrm process, long since resolved. During that time I created another scheduled export job. I think they are now conflicting with each other (export to the same file name). I was hoping to delete one of them, but am unable to determine where they are stored. Just for a test I created a third job, noted the jobID, but can't find that one either. They don't seem to be listed in the RME job browser. Where are these stored and how do I delete the extraneous jobs?
    Perhaps a related issue. When go to the System View of CW, there is a panel named Job Information Status. It always contains only the string 'Loading....' in red (along with Log Space Usage and Critical Message Window). Thoughts?.

    My guess is you have a lot of jobs on this system, and jrm is not returning fast enough.  I find that Firefox is a bit more tolerant to delays than IE.  If you can, try FF, and see if the job browser loads.  If so, purge some old jobs.
    Posted from my mobile device.

  • Where are data and docs stored on an ipad if I choose not to backup to the cloud?

    In my preferences I have notes, calendar, contacts, photos, etc. stored on the icloud.  However, I have apps such as Adobe pdf pro, Pages and Numbers loaded and I want to keep the docs generated from these programs on my ipad and no where else, so I've indicated this in my preferences (do not backup to the icloud.)  So where are the docs stored?  I've heard they are stored "in the apps themselves?"  What if I have fifty docs so stored? Will I ever lose any of them?

    Yes, they should be assuming you have registered the iPad on the Kindle site.

  • Where are the export codecs ?

    On a MacPro (at the office), we have Final Cut Pro 6 (Final Cut Studio 2), an AJA Kona Capture Card and Adobe After Effects CS4.
    In FCP there are a lot of QT export codecs. Codecs that I did not find in the export settings menu in After Effects.
    f.e. except "no compression" or "animation" there is no codec in AE for export a video with alpha. In FCP I have TGA+ or ProRes 4444.
    How can I enable these codecs in AE ?
    Kind Regards,
    Marnik

    Codecs that I did not find in the export settings menu in After Effects.
    Ahem, you do not export, you render via the Render Queue. Please read the help on how to set up correct output module settings and where to find the options.
    Mylenium

  • Excel dates export with wrong format.

    When I exported an Excel Spreadsheet with several date columns, they displayed correctly but because of wrong formatting, they didn't sort right. The cell display was, for example, 2/7/2013 but Excel treated it as 7/2/2013 because it was assigning another country's formatting. some of the cells were formatted correctly, but about half of them were wrong and they were wrong in different ways. some were Argentinian, some Carribean, some European. Any ideas how to prevent this from happening?

    Go to Sequence>Settings and in the lower left use load presets.
    Anything that's in the HD in the sequence will have to be reset using the remove attributes function. If you have mixed media, strange things will happen.
    Also use easy setup to change your preset so any future sequences you create will be in the correct format.

  • Where are the export options?

    I just updated to the latest InDesign CC version. (10.2.0.69)
    And when I try to export a file there are no options to choose the export format (PDF / JPG / EPS / IDML etc)?

    Nope, I always do that and it didn't help.
    But now I removed and installed the full InDesign program again from scratch – and it works...
    Just very annoying and time consuming. Must be some bug in the latest update, because it happened right after that.
    (Another strange thing I noticed was that you couldn't any longer import a picture into a frame, you had to import it into a new frame...)
    Thanks anyway!

  • Where are the windows with the folder pictures ?

    I suddenly realized that I'm no longer seeing the window at the top of the bookmarks window with the various folder pictures that changed as you clicked on a book mark within a folder. (I'm not even sure I'm asking this question right?) I recently downloaded OS 10.5.8. I was running 10.5.6. Did I lose something or did something change. Do I need to reset something ?
    Thanks.. Carolyn

    I havea discovered the name of what I seem to have lost. "Cover Flow". I did a google search and found that your mac has to supoort Quartz Extreme, and mine does. Obviously it did or I wouldn't have had Cover Flow previously. So what happened ?
    I'm really trying to figure this out myself, but I think I'm at the end of my knowledge here.
    Carolyn

  • Where are book bought with iBook stored on itunes

    I cannot locate a book I purchased on iTunes nor can I find how they charged me.

    They are not stored in a place you can get to them. Best you can do is try to bring up that contacts image and do a screen capture.

  • Essbase Data Export not Overwriting existing data file

    We have an ODI interface in our environment which is used to export the data from Essbase apps to text files using Data export calc scripts and then we load those text files in a relational database. Laetely we are seeing some issue where the Data Export calc script is not overwriting the file and is just appending the new data to the existing file.
    The OverWriteFile option is set to ON.
    SET DATAEXPORTOPTIONS {
         DataExportLevel "Level0";
         DataExportOverWriteFile ON;     
    DataExportDimHeader ON;
         DataExportColHeader "Period";
         DataExportDynamicCalc ON;
    The "Scenario" variable is a substitution variable which is set during the runtime. We are trying to extract "Budget" but the calc script is not clearing the "Actual" scenario from the text file which was the scenario that was extracted earlier. Its like after the execution of the calc script, the file contains both "Actual" and "Budget" data. We are not able to find the root cause as in why this might be happening and why OVERWRITEFILE command is not being taken into account by the data export calc script.
    We have also deleted the text data file to make sure there are no temporary files on the server or anything. But when we ran the data export directly from Essbase again, then again the file contained both "Actual" as well as "Budget" data which really strange. We have never encountered an issue like this before.
    Any suggestions regarding this issue?

    Did some more testing and pretty much zoomed on the issue. Our Scenario is actually something like this "Q1FCST-Budget", "Q2FCST-Budget" etc
    This is the reason why we need to use a member function because Calc Script reads "&ODI_SCENARIO" (which is set to Q2FCST-Budget) as a number and gives an error. To convert this value to a string we are using @member function. And, this seems the root cause of the issue. The ODI_Scenario variable is set to "Q2FCST-Budget", but when we run the script with this calculation function @member("&ODI_SCENARIO"), the data file brings back the values for "Q1FCST-Budget" out of nowhere in addition to "Q2FCST-Budget" data which we are trying to extract.
    Successful Test Case 1:
    1) Put Scenario "Q2FCST-Budget" in hard coded letters in Script and ran the script
    e.g "Q2FCST-Phased"
    2) Ran the Script
    3) Result Ok.Script overwrote the file with Q2FCST-Budget data
    Successful Case 2:
    1) Put scenario in @member function
    e.g. @member("Q2FCST-Budget")
    2) Results again ok
    Failed Case:
    1) Deleted the file
    2) Put scenario in a substitution variable and used the member function "@member("&ODI_Scenario") and Ran the script . *ODI_SCENARIO is set to Q@FCST-Budget in Essbase variables.
    e.g. @member("&ODI_SCENARIO")
    3) Result : Script contained both "Q1FCST-Budget" as well as "Q2FCST-Budget" data values in the text file.
    We are still not close to the root cause and why is this issue happening. Putting the sub var in the member function changes the complete picture and gives us inaccurate results.
    Any clues anyone?

  • Where Photoshop CS6 exports the clipboard and how to delete it

    Hello, I have a problem with Photoshop CS6. I made one big file (350x300cm) and I worked a long on it. When closed Photoshop I saw a message "Exporting clipboard" and it was very slow operation. Then, when I looked to my D part of Hard disc it was 2-3 GB less. On the next day, after work with the file - my D part was 1 GB less. Where Photoshop export clipboard? How to free up the space? I saved the file in C part of hard drive and C is scratch disc, Photoshop and my OS are installed on C, so why from D disappear space? Can you help me to bring back these lost space? I can't see any new files to delete. Where are this exported?
    I am working on Windows 8 64-bit.

    When Photoshop "exports the clipboard" it puts the contents of the separate Photoshop clipboard on the operating system clipboard. You can purge it by going to a text-based application, selecting a single character and and pressing Ctrl+C. A search of your drives for *.tmp (and delete found files) should get you some of that disk space back.
    While Photoshop is running, you can purge the Photoshop clipboard by choosing Edit > Purrge > Clipboard (or All).
    To prevent clipboard export every time Photoshop shuts down, deselect Export Clipboard in Preferences > General.

  • Date column with format mask 'hh12:mi pm'

    let's say the user input record as shown below :
    trip At01 At02
    1 9:30 AM 12:30 PM
    At02 & At02 are date column with format mask 'hh12:mi pm'. When the user input 9:30 and tab to next item, the column will display as 09:30 AM. Then when user input 12:30 at AT02, it will display as 12:30 PM.
    Anyway, if I enter 1:00 at AT02, it will display as 01:00 AM. Actually I want to display as 01:00 PM. I still can go back to the field to edit it manually but is there a way that I can do as mentioned ?
    Please advise.
    Thanks,
    Shu Wen

    You are going to have to write your own validation logic to do this - You'll have to decide what point AM shoudl be defaulted and what point PM should be used. I don't think that there is a format mask that provides this functionality.

  • [SOLVED]Where are the sata drivers?

    Hi people,
    I just bought a brandnew msi 770-C45 mainboard and want to install XP Pro.
    Now I know that you have to make a floppy with the sata drivers, but where are they? With every sata driver I tried XP only see 131Gb instead of the 320Gb.
    When I try a customized XP CD with integrated SATA drivers it work perfectly.
    Unfortunately after research I was not able to extract the sata drivers from the CD.
    Only I don't want customized XP, but the original XP.
    I also tried to search on the chipset, but no succeed.
    Normally they are on the CD. I tried every SATA/RAID folder and copy it to a floppy (per folder separatedly ofcourse  ) I tried the following folders:
    H:\ChipSet\AMD\XP\SBDrv\SATA (most likely, but strange that they talk about putting a sata card into the system)
    H:\RAID\Silicon_Image (tried all the three folders: SIL3114, SIL3132 and 3531)
    If you know where I can find the right drivers for a clean XP Pro 32bit install or which files to use, would be great!
    Thanks in advance :-)

    Quote from: alcapino on 28-August-09, 22:49:15
    OK, thanks for the answers guys! :-)
    First post of Svet didn´t had the sentence ¨Use XP installation disk with SP2 or SP3 included/integrated¨.
    That was why I asked further. The normal XP here with me doesn´t has any SP onboard.
    I will slipstream the XP Pro with SP2 and try it.
    Again thanks!
    EDIT: Works like a charm  :D XP is installing on my sata, thanks dudes  , you 
    Quote
    First post of Svet didn´t had the sentence ¨Use XP installation disk with SP2 or SP3 included/integrated¨.
    That was why I asked further.
    What sentence you expect? :D
    I've told you what to do to fix it.

  • Hi, i had backed up my data and then when i restored my phone with the restore backup option, all the photos, music where there but no apps. Al my apps are disappeared. Can you please tell me where are my apps backed up?

    Hi, i had backed up my data and then when i restored my phone with the restore backup option, all the photos, music where there but no apps. Al my apps are disappeared. Can you please tell me where are my apps backed up?

    Apps (like other synced media like music) are not included in the backup that iTunes makes. Thus, restoring from backup if the apps are not in the iTunes library there are no apps to restore to the iPod.
    Redownload the apps into your iTunes library.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    And then restore from backup.
    Make sure that in iTunes>Preferences>Devices the box that say "Prevent iPods..." is checked otherwise when you connect the iPod to the computer the previous backup (with your app data) might be overwritten.

  • Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.

    Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.

    Where are addresses kept on MAIL?  I don;t like the new format at all. Frances
    Begin forwarded message:
    From: Frances Topping <[email protected]>
    Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
    Date: August 25, 2014 at 9:46:01 AM EDT
    To: discussions-replies <[email protected]>
    Old Entourage is POP and new Mavericks MAIL  is IMAP I believe. I don;t know how to export in the forms you mention. Frances

  • Table are not prefixed with Schema in  SQL request - Unable to get Data

    I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
    First my architecture :
    Oracle 9g
    +500 Reports made under CR developper 8.5 or 9.0
    Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
    We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
    use only CR 2008 runtime.
    The problem :
    Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
    The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
    The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
    Example (SQL monitoring done with TOAD)
    Execution of postes.rpt report directly in CR :
    Timestamp: 10:30:03.881
    Successful logon attempt (session tag: 0x6464CB8)
    username: 'APPLI_HUET'; database: 'DEV'
    SELECT ...
    FROM  "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
    ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
    WHERE  "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
    Timestamp: 10:50:29.178
    Logoff (session tag: 0x6464CB8).
    Same report, same authentication but throught .net program :
    Timestamp: 11:01:24.569
    Successful logon attempt (session tag: 0xA93FC38)
    username: 'APPLI_HUET'; database: 'DEV'
    SELECT ...
    FROM   "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
    ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE  "POSTES"."N_ETAB"=2 ORDER
    BY "POSTES"."N_POSTE"
    Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
    The .net code :
    Dim _report As New ReportDocument()
    _report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
    Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
    myConnectionInfo.ServerName = "DSN_file"
    myConnectionInfo.UserID = p_Userid
    myConnectionInfo.Password = p_Password
    ' to see code in this method se my original post
    SetDBLogonForReport(myConnectionInfo, _report)
    SetDBLogonForSubreports(myConnectionInfo, _report)
    Dim frmViewer As New CrystalReportViewer
    frmViewer.CrystalReportViewer1.ReportSource = _report
    frmViewer.Show()
    Any ideas ?

    Thanks for the and sorry but I don't understand.
    I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
    I take a look at all code sample and I can't found anything.
    You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
    I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work  BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
    Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
    Another test :
    I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
    Then I launch it in .net with another DSN, it work also.
    Why report done with Crystal 8.5 or 9.0 have this problem ?
    I'me gonna be mad....
    Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM

Maybe you are looking for