Where do you create nameddest in Acrobat XI?

i have use this on previous versions but cannot find it in the latest version.

(This forum is about Reader, not Acrobat...)
Right-click the pane on the left and enable the Destinations pane. Then open it and click the New Destination icon:

Similar Messages

Where do you create a Selection Criteria TOKEN? (Crystal Reports, SAP B1)

I have downloaded "How to Work with Crystal Reports in SAP Business One" and read where it mentions "tokens" (starting on page 19). I followed the directions and created a New Parameter in a Crystal Report with the name of
BPCode@Select distinct CardCode from OCRD where CardType = "C"
as directed on page 21 as an example of a token. OK, so now I have a parameter with a very long name that doesn't do anything when I run the report in standalone Crystal Reports connected to our SAP B1 application.
At what place in the "Create New Parameter" dialog box in Crystal Reports do you actually enter this information? Nothing in that dialog box seems appropriate for SQL expressions. Reading through SCN threads, I could not find anything that addressed this simple question. What am I missing?
NOTE: I do NOT have the CR Add-In available to me in SAP B1. I cannot get it to install. All of my work is done in standalone Crystal Reports and all reports are then imported from there. I am a CR developer with less than 1 month experience with SAP B1.
Thanks.

OK, so I imported an .rpt file as a "report" instead of as a layout and placed it in a known module location (though the options were extremely limited). I had no idea where to go to run the report, but under "Modules", "Reports", and the location I just imported to, I found and chose the report.
The next step was a dialog box with two blank prompts and a third blank prompt asking for a particular field value from a table in the report. The actual Crystal report has only two parameters (good ol' DocKey@ and ObjectID@). I have to actually look at a known document in B1 and enter the values for the parameters before I get an actual result.
Now, more questions...
If there is a token in this report process, where is it?
Why would I run a report this way when it's going to ask me the DocEntry and ObjectId numbers which are not known to me unless I do research (Actually, what you don't know is that all of the reports I've created are revisions to marketing documents, so I haven't created anything new or unique to B1 that would involve complex analysis).
I spend almost two hours a day scouring the SCN to figure this stuff out and am still lost. I haven't read anything anywhere that describes this process in an adequate fashion. If SAP makes BOTH B1 and Crystal Reports, why not make the connection between them seamless and user-friendly?
Gordon, if you're listening, you'd probably do well writing another book on this subject!!

Can you create editable forms in Acrobat X Standard?

Hi everyone,
Hopefully an easy question although I cannot find a definitive answer on the product page.
I need to be able to create editable forms that others can fill in and print or save using Reader 8, 9 or X. Can these forms be created using Adobe Acrobat X Standard? The forms have been created in Word 2007 but we want to disribute them as PDF's and allow certain fields to be filled in on the PDF. The form will be downloaded from a website, filled in and emailed back.
Any clarification on this is greatly received.
Thanks...

I know you can create forms with Standard but I don't think you can enable them so that Reader users can save them without the Pro version.
dasnowball87 wrote:
The form will be downloaded from a website, filled in and emailed back.
Even if you could do this, you would want to carefully consider whether you want a form out there for everyone to fill out and send in. There is a restriction to the amount of times you can receive data from an enabled form. After 500 times, you would be violating the license agreement.

When you create new row where does it go?anywhere/end/first??

Just wondering does anyone know when you create a new row where is it popped on? is it the beginning, the end or is it popped on randomly?
Would really, really appreciate a response!! I'm stuck on this :-(

In order to be certain that the records are properly ordered use the order by clause
in your view object definition....otherwise your records may be randomly appeared....
Sim

How do you rotate the PDF you created in Acrobat but keep everything on the page from rotating?

How do you rotate the PDF you created in Acrobat but keep everything on the page from rotating with it?
I made a very complex form, but have decided it would be best to have it as a portrait instead of landscape.
Of course, when I rotate it, everything on the form is turned sideways.

Assuming that you created the form fields in Acrobat and those were just imposed on top of a document that you created from another application you might try these steps:
1. Create a new PDF in landscape from the original document.
2. Copy the form fields from the previous document to the new document.
3. Move the fields to the proper locations.
At least I think this has a chance of working. You might give it a try on a single page or such.

How can you create a writable PDF document from a PPT presentation ?

How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
Thanks.
B

You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
Open your PowerPoint Document then go to “File” “Print”
Select ‘Adobe PDF” Printer
Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
Default: PDF/A 1-b
Adobe Security: none (change as needed)
Adobe Output folder: Prompt for Adobe file name
Adobe Page size: Letter (change as needed)
Check the following check boxes
View Adobe PDf Results,
Add Document Information,
Rely on system fonts only,
Delete Log files for successful jobs.
Select OK
A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
Hope this will help.
Tiger26

How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

Hi
As my topic says
How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly. In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location.
But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line. No one is looking at the page. A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice. It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
So I would say, fine if you need them or want them there, it's just one word.
I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want. I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have.
I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
You may not experience the same results with your plug-in, but I think it will probably work the same way.
Give it a try and best of luck.

Color changes when creating PDF in Acrobat X Standard

I'm printing to PDF from Word 2010 by using Acrobat X Standard. Here are the two issues:
I have overlaid two text boxes (different colors) on top of each other. The overall image should be blue on top and bottom with tan in the middle. When I print to PDF in Word, the PDF is perfect; however, when I print to the printer, the blue on the bottom changes to purple, while the blue on top is correct. Again, this is the same blue text box, so I don't know why the color changes.
Also, the tan is a darker shade than what the PDF shows.
Is this a printer issue or PDF settings issue?
I'm new to using Acrobat, so any step-by-step help is very much appreciated!
Thank you.

Create Adobe PDF is a (by default) a LOSSLESS operation where Acrobat processes the Word graphics data directly into PDF. Printing is a LOSSY operation that first has Word convert Word->”printer spool”, then the printer driver (Adobe PDF) converts that “printer spool” into Postscript, and then Distiller converts the Postscript into PDF. As you might imagine, you get MUCH higher quality and fidelity results from the former.
Have you verified that you are using the same color management settings in the printer from both Word and Acrobat? Is the Konica configured for Postscript, PCL, other? There are SO MANY possible options that could be impacting your configuration…

Can you create a pdf e-mail attachment with working hyperlinks?

I'm trying to figure out how to generate an e-mail with working hyperlinks where the recipient doesn't have to open the pdf for the links to work...in other words, when they open the e-mail and view the pdf as it is displayed, the links are visible and the viewer can click on them and go to a URL. I see this all the time, and can't figure out how to do it with a pdf (I've added the links with the link took in pdf and they display within the application window, but disappear when the file is an e-mail attachment) or with html. I've attached the pdf that I'm trying to make interactive within an e-mail message. Any help that can be provided is much appreciated!

Michael your answer is colored by the fact you use an ASCII (Text only) News Reader.
The answer is more along these lines:
PDF's can be created with working hyperlinks.
They can be automatically be brought over from programs such as MS Word, Open Office, and such provided your on a PC Platform
they can actually be viewed and clickable from Acrobat or Reader PC Versions, if created from a PC Version.
they are not viewable or clickable if created from Mac version of Office.
They are viewable and clickable from a PC if created from Mac version of Office (Word/Excel)
The Mac can can not do so automatically you must do them Manually with in Acrobat.
in Past it has been a Pain to do so though may be different in version 9
If you use a browser Plugin such as Schubert's PDF Browser Plugin that works on Safari, fireFox, Camino, SeaMonkey Opera, OmniPage, iCab. Links you create in Mac version of Acrobat are viewable and clickable.
Finally MS and Adobe have been having this on going problem since the day's PDF's first hit the market. (Version 1.) and MS decided to support them. The hooks are there for both PC and Mac versions of Word. and either are capable of being created and acted upon on whether created by the Mac version of Office, or the PC version of Office, but only on a windows PC. Its clearly a problem of Acrobat/Reader on the Mac. Its either a problem Adobe won't own up to, or they can't solve or, this is one item they can't be bothered with to put in the Mac Versions.
Some of this information is based on my participation in the msnews. nntp newsgroups for Office Mac. The experts there for the most part (MVP's) use both Mac and PC's and have investogated the problem themselves and been give information from the MacBU (Mac Business Unit) at MicroSoft. The basic internal code of Office 2003/2004 is the same. The UI is different and key cobinations are different. And same for 2007/2008 except office 2008 don't support VBA and Macros, and neither 2004 nor 2008 have MasterPages, And thankfully according the the MVP's Thankfully the Robbonis not supported on 2008.

How do you find a file you created and saved online?

I am new to Adobe Pro. I created a file online the other day and when I log in all I get is marketing material and my account profile. Where do I find my file(s)?

Hi jacquelineg15867980,
If you created a file online, you were most likely using one of the Acrobat.com online services, and not Acrobat Pro, which runs on your desktop.
In fact, it looks like you have an Adobe PDF Pack subscription, which is, indeed, a Acrobat.com online service.
Please log in to https://cloud.acrobat.com/files with your Adobe ID and password, and see if your file is listed there.
Best,
Sara

Where are the settings to make Acrobat software recognize my scanner?

Where are the settings to make Acrobat software recognize my scanner? I've had my computer on a road trip. When I returned to the home office, I can't get Adobe Acrobat 10 Pro software to recognize my scanner, which is a 4-in-one printer. Acrobat will print to the printer, but I can't get it to recognize the scanner to scan a document. Any suggestions as to how to fix this?

Open the Acrobat application(Acrobat X) and later navigate to Create>PDF from scanner>Configure presets and later select the Scanner which is connected to your computer and check it will work.
If you are getting two options ie WIA and TWAIN please select TWAIN as Acrobat is compatible with TWAIN interface than WIA.

Where would you check performance of webi? query is taking long time to run

Hello All,
In the bex query world running on portal you were able to go to sm50 and check what the query is doing and where it is taking a long time or atleast you were able to see the processes runing.
Where would you check the running processes when you are running a webi query, we are trying to write a webi report which is on universe which is created on bex query. The report is very simple just two fields and an mandatory variable which is coming from bex query (have defined the variable in bex query). When we exeute the query it is taking a long time just spinning and I am not getting any data back, on the same query before even hitting the run query button, I am trying to put a object in query filters and set the filter as In list from Value(s) from list and it is taking forever to set that filter.
Can we go to CMC or BW backend and check anywhere we are using sap authentication, I see the number of sessions in CMC but that is it.
Thanks for help in advance.

Thank you both for the replies.
How would I get the MDX that is generated by the query, I remember there is a note for starting the MDX logging. Can you please let em know how would I get the MDX statement. Thanks.
Gowtham - What is the optimal array fetch size that needs to set for the universes, can you explain bit more about array fetch size?
All our universes are on BEx queries designed in SAP BW in that case does the array fetch size matter and array bind size matter? I had read this in oneof the universe designer manuals for OLAP universes The Array fetch size, Array bind size, and Login timeout parameters are not used for OLAP connections
Thanks again for replies.

HT204053 I am trying to sign up for icloud using windows 7. When I enter my apple id it says "this is a valid apple id but is not an icloud account". Where do I create an icloud account?

I am trying to sign up for icloud using windows 7. When I enter my apple id it says "this is a valid apple id but is not an icloud account". Where do I create an icloud account?

I already quoted the minimum requirements, look in the post before yours.
You will have to upgrade your Mac to at least 10.7.5, upgrades are not free, you buy them from the App Store. Mountain Lion is the best but your Mac must be compatible.
Here is a list of compatible machines.
Also note that some older apps (Office 2004, Appleworks) will not run on Mountain Lion.

How do you create the 'cream pop-up info text boxes' that appear when you hover mouse over?

Hi people,
I really need to know how you create the 'cream pop-up info text boxes' that appear when you hover your mouse over an object on a webpage (and often in any program e.g. Photoshop) for more than a second. I need to know because the logo on my website is the navigation tool used to return to the homepage. It is always found in the top left so the user can always click it to return.
The only problem is im the only one who knows that when you click my logo, you return to the homepage. I need one of these 'cream info boxes' (forgive my lack of knowledge) to appear so the user will figure it out.
Thanks for taking the time to read my question...

Using your code it should look like this where title attribute is in red:
<div id="apDiv2"><a href="index.html"><img src="divs_dw/jtgd_logo_trans.png" alt="jtgd_logo" title="your description goes here" width="176" height="163" /></a></div>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

In Address Book, why does Apple let you create custom fields in the Template cards but not have them available for importing?

I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
I also add two more custom fields in the Email area.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?

While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
<http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
<http://hints.macworld.com/article.php?story=20110729034827358>
<http://www.macworld.com/article/1047793/folderinterm.html>
<http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
<http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal>

Where do you create nameddest in Acrobat XI?

Similar Messages

Maybe you are looking for