Where does form execution continue after executing NEW-FORM-INSTANCE triggr

I am debugging a form and trying to find where a certain Procedure is being called. I'm unable to locate the procedure by searching in the "Find and Replace in Program Units". I cannot execute the form in Debug mode because of the Oracle environment. So I have embedded message alerts in strategic triggers in the form. I have followed execution to track the offending call statement and executed after the exit from NEW-FORM-INSTANCE trigger and before the NEW-BLOCK-INSTANCE triigger of the primary block.
Where should i look next? Where would program execution go after NEW-FORM-INSTANCE?
Thanks,
Uday

I cannot execute the form in Debug mode because of the Oracle environment. Not sure I understand this. Can you run your form from the Forms Builder? If yes, then you should be able to run the form using the debugger. If no, then I recommend you use the "Remote Debugging" feature of Forms and debug your form while it is running on the application server. So long as the CLASSPATH on the server is setup correctly, all you need to do is pass DEBUG=YES in the URL. For more details on using Remote Debugging, see My Oracle Support document id: 221399.1 (Debugging Applications Remotely).
Craig...

Similar Messages

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter

HT4623 IPhone does not accept slice after Iihaddat new 6.0.1 device type as the iphone 3gs

Official solution in the iPhone does not accept SIM after Iihaddat together knowing that iTunes updated, the new release bearing ČÓ Miqubl chip device Brightening official

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

Where does one sync iPhone with the new iTunes? The button to get to iPhone disappears after a few seconds.

I downloaded the new iTunes tonight (11/30/12) and it is significantly different but there is a problem with the icon for finding the iPhone in order to sync. They have either made this significantly harder or there is a bug. The video tutorial was no help on this point. Thanks.

try holding ctrl + S. that should pop the side bar up, so you can see your devices.

Imac G5/Intel, OS 10.6., system does not start up after connecting new router

After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
What can I do?

And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Where does xcode 5 save the executable files that it creates?

I already built my console application, and I can run it from xCode as well. Now I'd like to find the executable file it generates. I saw in an old tip in this forum that it's just to right-click the corresponding product item and select Show in Finder in the menu. However that option is disabled, as you can see in the picture below.
I also tryied the bin\release\debug and it's not there as well.
What am I doing wrong?
Tks in advance,
Mauro Assis

I checked the Locations and they're default, as you can see below:
Am I correct?
Opening the default path in Finder:
Do you think it should be here? Where?
Tks again,
Mauro

Where does my Sylenth1 go after install?!?!?!

Ok so I was using an demo version of Sylenth1 because I wanted to try it out. After buying it. I open the DMG and the PKG file opens. It shows me which HD I want to install on ( which obiviously it will need to be installed on the internal HD of the mac, Really stupid ) AND you can't CHOOSE exactly where it goes nor does it show you WHERE its going. I keep opening it up after I deleted all my old sylenth files from my mac and open up Logic 9 and it STILL shows the demo which im confused because i thought I just deleted it. I deleted everything from the finder that says sylenth or anything related. And this still happens. I hate mac and I want to throw it against the !@#$en wall because if this was a PC this would take 2 seconds to do and everytime I try to do something on a mac its always a struggle. Can someone tell me where it goes or where I can find the old sylenth files to delete them?

settle down...... The component file for sylenth will be in /library/audio/plugins/components.

Where does the execution of the code begin

Hi all,
I am wondering where the execution of the code below begin.
Declare
cursor c_zip(p_state in zipcode.state%type) is
select zip, city , state
from zipcode
where state=p_state
begin
for r_zip in c_zip('NJ')
loop
dbms_output.put_line(r_zip.city||' '||r_zip.zip');
end loop;
end;

At the first statement after the begin keyword?

Top Sites page does not stay open after clicking New Tabs

I used to be able to click on “Open a new tab” and the “my top sites” would be available on that page. Now when I click on “Open a new tab”, “my top site” appears and disappears immediately; each and every time. However, if I open 2 new tabs and then go back and click on the 1st tab then the 2nd tab, “my top sites” are available. Also can I get my top sites as my home page?

There is this pref: browser.tabs.loadBookmarksInBackground
But it doesn't have effect if you open links via the Library, it only works when opened via the browser window (menu, toolbar, sidebar).

Where does my info go after I import in time machine?

I can't find my documents, users, etc. Where is it all?

Where is it all?
In a parallel universe......
Sorry I couldn't resist, but it's not all that far from reality....
Are you just trying to see your doc files in Time Machine or actually trying to restore them back to your internal HD?
http://web.me.com/pondini/Time_Machine/15.html
Dennis

Where does my space go after restoring windows using bootcamp?

i have installed windows xp on my macbook intel core2Duo 1.83 GHZ, 80GB, 1GB DDRII, 12"" using bootcamp assistant,
i restored it using bootcamp, it took about 8 hours but thr process still didnt go successful,and i turned off my mac book, now windows partition has been removed but it shows used space 35 GB and available 5 GB, where did my remaining space go? and for your info i havnt mac installation disk as iam using my friends macbook who is in saudi arabia and iam in pakistan.
plz reply

Restore your system from backups.
Clone your Mac OS volume to another hard drive, boot from there, ERASE the drive (not the volumes) if Disk Utility First Aid hard drive repair fails to work.

Where does a movie go after I choose download later while redeeming a code?

Hello All,
I was redeeming a code for "The Cabin in the Woods" blu-ray and it was successful. However, I chose to save the download for later because I had a couple of other movies downloading and now I can't find it to download it. I can see the film on my iPhone 6 Plus but I can't find it on my PC or my iTunes. Any help would be of great service.
Thanks,
Jonathan

Hi xChaOsNiNja216x,
Welcome to the Apple Support Communities!
In this situation I would first suggest checking for available downloads in iTunes. Please use the article for further information and how to complete this process.
iTunes: How to resume interrupted iTunes Store downloads - Apple Support
If your download was interrupted using your Mac or PC
Open iTunes.
Choose Store > Check for Available Downloads.
Type your account name and password if prompted.
Have a great day,
Joe

Where are the original documents after scanning/copying?

Where does the document go after it has been scanned or copied on the ADF? We have scanned three documents and can not find the originals .

Hi,
Printer/scanner CAN'T chew the originals, they should be on the glass. Their copies or scanned files normally are in C:\Users\[your logon]\Documents or My documents depending on which Windows on your computer. You can also find where they are by scanning from your computer and the default folder should be under the preview window or on the screen before Save
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

In Forms 10g Where does SQLs execute?

In Oracle Forms 10g there is Java Applet on top of which our Application runs. Now suppose we have a button and in that we execute a SQL to get a column value.
Now where does the SQL fire?
Does it fire in the Applet (i.e in client) or does it go to the App Server and then execute?

RTM first!
If it's PL/SQL written in the form, that executes on the application server, that has a PL/SQL engine.
If it's a call to a procedure stored in the database, that executes in the database.
If it's SQL, then that can execute nowhere else except in the database.
Do not imagine that the applet does any other thing except rendering what you see on screen and handling the clicks and keystroke to the application server (which does the further processing, handling to the database the SQL that has to be executed).
Briefly, that's the basics.
HTH
Edited by: BEDE on Nov 16, 2010 11:15 AM

Where does form execution continue after executing NEW-FORM-INSTANCE triggr

Similar Messages

Maybe you are looking for