Where is documentation of the SAAJ error messages???

I am getting these error messages:
SEVERE: SAAJ0537: Invalid Content-Type. Could be an error message instead of a SOAP message
SEVERE: SAAJ0535: Unable to internalize message
Yes, I've looked up the dozen or so posts about these messages, and none of them have so far resolved the problem. I am in the process of trying to monitor the TCP packets, but I'm new at this. But my bigger question is, what idiots would release software without documenting the error messages that can be returned?? Why is the only available information on them randomly in developer forums? Is this professional?
Inquiring minds wish to know...
Grr.
Phil

Hi,
U can check Table <b>SXMSPERROR</b> in in SE11....
Regards,
Sridhar Reddy

Similar Messages

Where I can find the XML error messages repository?

Hi guys,
I don't know where I can find the XML error messages repository? (SXMB_MONI)
I found a structure SXMSMSGDSP! But this is only a structure... I need a table or something like a program who can handle this structure.
I think, this structure is used to shown an ALV, but first, a method read from memory and handle these data to ALV functions.
There is a simple table or a kind of way to access this data (error messages) and manipulate it?
Thanks in advance,
Ricardo.

Hi,
U can check Table <b>SXMSPERROR</b> in in SE11....
Regards,
Sridhar Reddy

Where I can find the "complete error message"

Hi, All
I'm reading the J2EE 5 tutorial on JSF. It mentioned "See section 2.4.5 of the JavaServer Faces specification, version 1.2, for a complete list of error messages" in http://java.sun.com/javaee/5/docs/tutorial/doc/bnast.html . I cannot find out where it is.
Pls help.
Thx

JSF 1.2 specification: http://jcp.org/aboutJava/communityprocess/final/jsr252/index.html

During an update to my i tunes the update failed and now I can't access my i tunes and my laptop where it was stored states an error message MSVCR80.dll , then a further error 7 windows 126 messagee

Please can anyone help? tried to update my itunes and now can not access at all and now have error message cant access as file MSVCR80.dll is missing from computer and then a further message error 7 (windows 126) . laptop and i tunes working perfectly before the update. I have tried unstalling the itunes programme and re installing but still the same error message .
both my i pads and i pods are still ok its just the i tunes.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Still have the same error messages

Hi Rajiv,
Thanks a lot for your help. I tried to load the java package
before I exported my images. The loading java worked sucessfully,
however the same error messages came out when I exported images.
Actually, I stored five JPEG images as ORDSYS.ORDImage in a table
for a test. Below is my image-loading codes and the images are
truely in the database since I proved it by running a
check-properties script.
-- This program will create a table called imgtable and import
-- five .jpg files into it. Also the status of the images will
-- be checked.
connect imgdemo/imgdemo;
set serveroutput on
set echo on
-- decomment for demo images
drop table imgtable;
create table imgtable (id number,
Image ORDSYS.ORDImage);
-- Insert a row with empty BLOB.
insert into imgtable values(1,ORDSYS.ORDImage.init());
-- Insert a row with empty BLOB.
insert into imgtable values(2,ORDSYS.ORDImage.init());
-- Insert a row with empty BLOB.
insert into imgtable values(3,ORDSYS.ORDImage.init());
-- Insert a row with empty BLOB.
insert into imgtable values(4,ORDSYS.ORDImage.init());
-- Insert a row with empty BLOB.
insert into imgtable values(5,ORDSYS.ORDImage.init());
--importimg.sql
set serveroutput on
set echo on
-- Import the two files into the database.
DECLARE
obj ORDSYS.ORDIMAGE;
ctx RAW(4000) := NULL;
BEGIN
-- This imports the image file img71.gif from the IMGDIR
directory
-- on a local file system (srcType=FILE) and sets the properties.
select Image into obj from imgtable where id = 1 for update;
obj.setSource('FILE','IMGDIR','1.jpg');
obj.import(ctx);
update imgtable set image = obj where id = 1;
commit;
-- This imports the image file img50.gif from the IMGDIR
directory
-- on a local file system (srcType=FILE) and sets the properties.
select Image into obj from imgtable where id = 2 for update;
obj.setSource('FILE','IMGDIR','2.jpg');
obj.import(ctx);
update imgtable set image = obj where id = 2;
commit;
select Image into obj from imgtable where id = 3 for update;
obj.setSource('FILE','IMGDIR','3.jpg');
obj.import(ctx);
update imgtable set image = obj where id = 3;
commit;
select Image into obj from imgtable where id = 4 for update;
obj.setSource('FILE','IMGDIR','4.jpg');
obj.import(ctx);
update imgtable set image = obj where id = 4;
commit;
select Image into obj from imgtable where id = 5 for update;
obj.setSource('FILE','IMGDIR','5.jpg');
obj.import(ctx);
update imgtable set image = obj where id = 5;
commit;
END;
-- chkprop.sql
set serveroutput on;
--connect imgdemo/imgdemo
--Query imgtable for ORDSYS.ORDImage.
DECLARE
image ORDSYS.ORDImage;
idnum integer;
properties_match BOOLEAN;
BEGIN
FOR I IN 1..5 LOOP
SELECT id into idnum from imgtable where id=I;
dbms_output.put_line('image id: '|| idnum);
SELECT Image into image from imgtable where id=I;
properties_match := image.checkProperties;
IF properties_match THEN DBMS_OUTPUT.PUT_LINE('Check Properties
Succeeded');
END IF;
dbms_output.put_line('image height: '|| image.getHeight);
dbms_output.put_line('image width: '|| image.getWidth);
dbms_output.put_line('image MIME type: '||
image.getMimeType);
dbms_output.put_line('image file format: '||
image.getFileFormat);
dbms_output.put_line('BLOB Length: '||
TO_CHAR(image.getContentLength));
dbms_output.put_line('-------------------------------------------');
END loop;
END;
The program that I used to export images is as follows:
-- retrive an image in the database and display it
connect internal;
CALL DBMS_JAVA.GRANT_PERMISSION (
'IMGDEMO',
'java.io.FilePermission',
'/home/oracle/img/test.dat',
'write');
CONNECT imgdemo/imgdemo;
SET SERVEROUTPUT ON
SET ECHO ON
create or replace directory imgdir
as '/home/oracle/img';
grant read on directory imgdir to public with grant option;
(line 1) DECLARE
src ORDSYS.ORDImage;
ctx RAW(4000) := NULL;
BEGIN
-- Select the desired photograph from the stockphotos table.
SELECT Image INTO src FROM imgtable WHERE id = 1;
ORDSYS.ORDIMAGE.export(src, ctx,'FILE','IMGDIR','test.dat');
EXCEPTION
WHEN OTHERS THEN
RAISE;
-- EXCEPTION
--WHEN ORDSYS.ORDSourceExceptions.METHOD_NOT_SUPPORTED THEN
-- DBMS_OUTPUT.put_line('Source METHOD_NOT_SUPPORTED caught');
--WHEN ORDSYS.ORDSourceExceptions.SOURCE_PLUGIN_EXCEPTION THEN
-- DBMS_OUTPUT.put_line('SOURCE PLUGIN EXCEPTION caught');
--WHEN OTHERS THEN
-- DBMS_OUTPUT.put_line('OTHER EXCEPTION caught');
END;
host ls -l ~/img/test.dat;
The error message is as follows:
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "ORDSYS.ORDSOURCE", line 354
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 13
I really tried everything to fix it and still doesn't work. I
guess maybe the export method is not implemented for intermedia.
Best regards,
Kai

Kai,
You're almost there! I apologize for not providing a complete
response previously. I thought the webiv note had sufficient
details on java file permissions.
For export to work, ORDSYS needs write permissions on the file
as well.
call DBMS_JAVA.GRANT_PERMISSION( 'ORDSYS',
                                 'java.io.FilePermission',
                                 '/home/oracle/img/test.dat',
                                 'write');The interMedia documentation doesn't correctly describe all the
requirements for granting file write access using
DBMS_JAVA.GRANT_PERMISSION. You must
either grant write access to public, or to both a specific user
and the ORDSYS user name. For example, you might grant write
access to all files in all directories to ORDSYS and write access
to all files in a specific directory to SCOTT.
call DBMS_JAVA.GRANT_PERMISSION( 'ORDSYS',
                                 'java.io.FilePermission',
                                 '<<ALL FILES>>',
                                 'read,write');
call DBMS_JAVA.GRANT_PERMISSION( 'SCOTT',
                                 'java.io.FilePermission',
                                 'D:\ordjava\test\data\*',
                                 'read,write');See the security and performance section in Oracle Java
Developer's Guide and the java.io.FilePermission class in the
Java API for more.
Hope that helps,
Rajiv

How to check the SQL error message to address the application issue

Dears,
The application runs SQLs against Oracle via oracle client(actually the app is IBM Cognos which shows report and the data is from oracle database). So, for a report which fails to run, I want to check the sql and the error message for this failed sql statement. Where is the message stored, client or server and How to get it?
I know there is a view v$log used to check the sqls ran in database but here I mean the failed sqls....
Thanks,
Ricky Ru

969543 wrote:
The application only presents the application error message.. And it is not helpful for me to get the root cause..The application uses the Oracle Call Interface to communicate with the database server. OCI calls return a result code to the client. The client is expected to call OCIErrorGet() to get the full error text.
If the client does not do this, or obfuscate the server error, or suppress the server error? Crappy client. The lack of the client to play its role as client, correctly within the documented client-server architecture, is solely the client's problem. Not the server.
For DB2, I could use db2diag to check the log. why oracle can not do this? any thoughts?Because Oracle is not stupid? Why on sweet mother earth waste server resources to track client application errors, on behalf of clients? How does this make ANY sense!?
Oracle server's handles 1000's of SQL executions per second. Just where is it to find sufficient space to log application errors (not database system errors) at that rate? How do you justify that overhead? Using the argument that the application is poorly designed or written? Come on!

Stop the Internal Error Message in Fireworks CS4 or CS3

About 8 hours ago I ran into what is apparently a fairly
common problem for many people using Fireworks - the error message
that wouldn't allow me to save anything. Luckily, I paid attention
in class long enough to at least know to save my work often, so I
didn't lose much - just a basic wireframe that I threw together in
15 minutes or so. Thankfully, I tried saving when I did or this
would probably be a very tearful night for me. Instead, it's just a
long night. I can deal with that.
But, before I pat my iMac on the top of it's screen and say
"goodnight" I wanted to share with you the secret to "fixing" the
error message. Hopefully this will help those poor souls in the
future who need a little guidance from someone who's been there,
done that, and is too tired to design the t-shirt. This method will
also work on Windows machines.
I'm not saying this is guaranteed to work for you, but I'm
telling you it's worth a shot. It only requires a little of your
time to do and will hopefully be the fix you need. If it's not,
please accept my sincerest understanding of your frustration and
try another method. This fix suggests that you have added, removed,
or relocated fonts on your computer since the last time Fireworks
worked properly, however, even if you haven't done any of those
things I'd still recommend giving this a try. Here's what you do:
1. Open your favorite font manager software. I prefer the
pre-installed Font Book on the Mac, but you can use any font
manager that you want. Some good commercial font management
programs for Mac include, MasterJuggler, Suitcase Fusion, FontAgent
Pro, and Font Explorer X. For Windows you might want to try, Font
Fitting Room, X-Fonter, Suitcase for Windows, OT1 Font Manager by J
M Berthier, MainType, FontExplorer for Windows, Printer’s
Apprentice, FontAgent Pro for Windows, Typograf, or FontExpert.
Those are in no particular order, just in case you were wondering.
2. select all of your installed fonts - including your system
fonts. Run your "validate font" command for the font management
program you're using. Sit back and let it work. I had more than
6,000 fonts on my Mac, so it took a few minutes to run through all
of them.
3. Your font management program should let you know which, if
any, of your fonts are corrupt, duplicates, or otherwise
dead-weight. Chances are there will be a few if you're getting the
internal error message at start-up or save with Fireworks. You need
to delete or at least remove these fonts from the fonts folder. I
had, and I'm ashamed of this, 256 duplicates and 135 dead fonts on
my poor computer. But, in my own defense, I did just reinstall many
of the fonts a few days ago and was planning to gradually work
through them to pull out the dead/unwanted ones. I should have done
that before putting them to disc last time, but no... I wasn't
thinking.
4. once you have the fonts removed/deleted that produced
errors or warnings during the scan with your font management
program you might want to run the scan one more time just to be
sure you got everything out. If everything looks good, you can now
quit/exit the font manager.
5. here's where things will seriously divide for Windows
users and Mac users. Therefore, I'm not going to fully explain
where you need to go or how to get there for this step, but I will
provide the basics. On your computer, you need to find the folders
for fireworks that contain your preferences for the program (hint,
look in the user's appdata folders, which is hidden, for Windows or
the user's Library for Mac). Inside the preferences folder you'll
find a file that houses a list of fonts, probably called fontlist
or something very similar. Delete it. You might also wish to delete
the cache for the program preferences. Those need to be regenerated
in order for this to work.
6. Find your computer's font cache while you're looking
through the massive amounts of folders and delete the file there
too for a little added security that this will work.
7. restart your computer.
8. open Fireworks and create a new file. Save that file to
your computer in whatever format you want.
If the program opened, the file saved, and you didn't receive
that same old error message, congratulations, it worked! You may
have to re-establish your preference settings, but you shouldn't
have any other problems.
That is the best I can do this evening... or morning I
suppose it would be. Best of luck to you!
-Skip

djbroklee wrote:
> i'm on the struggle still, i've done the uninstall
reinstall thing,bought a
> font manager even though i don't go big on fonts,cleared
cahces,did
> regedits,you name it.
> the fight continues.
> as far as support from adobe they pretty much don't care
they got my thousands
> already this quarter.
> i'm thinking about a system restore now, pretty much
lost out on those last
> two days of pay and now that today is about over i have
nothing to lose if i
> can't get it fixed.
> anyone have any ideas out there?
> it's too bad i committed to adobe before accepting these
adobe type jobs.
> worst case i'll do the work on mirage until i can
finally get the quick
> background drop of fireworks again.
> i didn't pay thousands but it has never even hiccupped
no matter scripts or
> tasks i crammed into it.
> this fireworks issue sort of thing is what put me off
adobe in 2000, no
> support for issues,and wonky worksmanship.
>
> anyone have the answer thow it over to me,i could surely
use the catch up on
> getting paid thing right about now.
An update is being made to address some major problems, if
you hold
tight you might find a solution soon.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html
How To Report A Bug To Adobe
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.

I have OSX 10.7 Lion I set up a separate email account for my wife. Now when she tries to enter a website we get the following error message: Java Script: Not Null validator already loaded. The website never opens and it is difficult to get out of:

I have OSX 10.7 Lion. I set up a separate email account for my wife. All of a sudden when she tries to enter and website from email we get the following error message. JavaScript; The notnull validator has already been loaded. From there we can't seem to go any where. When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai. If you try and got directly to Safari you get the same error message and can't go any further. Please help.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
When I click "Agree", It is disabled.
Can anyone tell me why this has happened and how to resolve it?
Please, please, please help.

Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
This Apple ID has not yet been used with iTunes.
I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

Well... what IS the error message?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

Where is documentation of the SAAJ error messages???

Similar Messages

Maybe you are looking for