Where is line item display order maintianed in document?

Hello,
I am creating a Sales Order using DIAPI.
It has 5 line items. The LineNum value is sequencial starting from 0.
If I open the order created using DIAPI in SBO UI and insert in the second row the LineNum sequence is broken.This item is shown with the last line number but in the UI i can see it as second item.
Where is this the display order maintained? In which column in RDR1 table?
Thanks and Regards,
Sheetal

Hi Sheetal,
I believe it is the VisOrder column in the RDR1 table.
Hope it helps,
Adele

Similar Messages

How to change line item column order in FV50

Hi,
I need to change the line item column order in GL document entry screen. I tried drag and drop but it didn't work for all the columns. Is there a setting I can change for all the users?
Thanks for the help.

It does not work for all the column, but those columns that you can change can be fixed. First change the column to the desired sequence, then click on small icon at the right end of the column. When you take the cursor over that corner icon, it displays "configuration".
There, give a zname and enable set as default. and save.

Vendor line item display with internal order

In Vendor line item display is it possibe to see details of the line item of offsetting account .
For example a expense account is debited & vendor account is credited .At the time expense account debit a internal order has been assigned in line item.
User wants to see the vendor line item display ( T code FBL1N) with details of internal order appearing in open line items display etc .
Is this possible .I created a layout with order as a field but order does not show any values in the line display of vendor.
Please revert back if this can be possibe.
Thanks
Manoj

with a combination of notes
112312 - Line item - Display of offsetting ac information
373268 - Line item - new display field
569939 - Line item - Open FI - Absolute amounts
1034354 - FAGLL03 - Display of offsetting account information
you should be able to get it there.

Not displaying Actual cost Line Items for Order

Hi Gurus,
Recently we did patching from SPC6 to SPC8. After patching we noticed that could not able to see displaying Actual cost Line Items for Order from work order.
System is not throughing error message when I double cline on line item at Plan/Actual Comparison screen in work order cost tab.
We can able to see the same from KB01 with out any problem. I have attached the details.
Could any one suggest me please. Appreciate your thoughts
Regards,
Srini

Hi Paul,
I have implemented this note and get it sorted out.
Thank you for support.
Regards,
Srini

Line item display for Internal Order

Hi All,
What is the transaction code for Internal Order line item display.
Thanks,
Misbah

Hi,
Its KOB1 to KOB4.
Rgds.

Display Variance line items for Orders

Hello Sapients,
I am trying to execute Transaction code KOB3 (Display Variance line items for Orders) ( /n > Accounting> Controlling > Product Cost Controlling > Cost Object Controlling > Product Cost by Order > Information System > Reports for Product Cost by Order > Line Items > KOB3 )
But for some reason I do not see any thing.
Your Advise is greatly appreciated.
Thanks and Regards
Ravi

There is no problem with Authorization.
And i am checking for the correct cost elements and prorcess orders.
Not only KOB3 but also the related reports are not working (viz: GR55-> 7KV9)
thanks and Regards
Ravi

Table where i see actual cost line item for order (KRMI)

Dear.
I need to know the table of every single document number of a cost element that I see in the actual cost line item for orders using transaction KRMI.
Thanks
Moderator: Please, search SDN

Hi
Refer the field Object No (OBJNR) in COEP.. In your case, the OBJNR would be ORXXXXYYYYYYYYYYY, where OR means Order, XXXX = Contr Area and YYYYYYYY = Int Order No with preceeding zeroes
Qty is also recorded in COEP
BR,Ajay M

Vendor Line Item display/ and Purchase order Field

FI Experts
We recently implemented the MM PO module in SAP, we are creating PO's automatically in SAp from a 3 party system. We are using field "Our Field" EKKO-UNSEZ to enter a reference from the 3rd party system. Our account payable have requested that they need this field to display in FBL1N "Vendor Line Item Display". I tried by using special fields but table is not available. Anyone has any suggestions? I know I can use BSEG and EKKO but it is too big of a table to use. Does this requires more of an ABAP report rather than just a simple QUERY report?
Your suggestions are appreciated.

Hi,
PO Nr. doesn't appear in Vendor line item, but yes, in GRIR account.
So when are you performing MIRO, you may use XREF3 field, which usually remains blank, through user exit (OBBH) for populating PO Nr. But yes, if you are processing MIRO of multiple POs, you may not be able to set multiple values.
BR

Table where i see actual cost line item for order (KKBC_PKO)

Dear.
Using transaction KKBC_PKO i can see the actual cost line item for order.
In which table I see these data ?
Thanls

Hi,
check COEP (CO actual line items) the objectnumber is OR+the order number.
Best regards, Christian

RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
The query that the jump is to be performed from an Aging query.
The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
Has anyone else out there tried this?
If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
All ideas appreciated . . .

I'm still hoping that someone can help with this issue.
Here's a repeat of the original question:
I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
The query that the jump is to be performed from an Aging query.
The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
Has anyone else out there tried this?
If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
All ideas appreciated . . .

Customer number needed in "GL a/c line item display" for customer gl?

Hi SAP Experts,
while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
How can i solve this problem?
Plz guide me.
I need a quick response.
Regards,
Biswa

Hi,
Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
I hope these helps.
Regards
Ravinagh Boni

Assignment Number in GL A/c Line Item Display

Hi Guru,
In Assignment No column, GL A/c line item display ( FBL3N ) it is showing the Billing Document No same as in Referance No Columnbut not the assignment no,
but should actually show the Assignment No as per the Billing Document Display VF03, where it is showing correctly.
Can you please help.
Thanks
Mukh

are you saying the assignment field for the customer entry is correct but for the GL account it is not?
If that is the case you could either do a mass update of the assignment field from the customer entry to the GL account entry.
However to correct this at source you need a substution that looks at the customer assignment value and copies it into the GL account entry.

FM for Actual cost line items for orders.

HI EXPERTS,
I was working on Actual cost line items for orders / Internal orders of an employee.
standard program RKAEP000 is present through TCODE KOB1.
I want some customization of report, so debugged the program and found that its using a FM 'K_LINE_ITEMS_SELECT_AND_LIST' to calculate internal orders.
But the FM has used REUSE_ALV_* and displaying output itself.
the requirement is to customize the output display .
I searched with K_LINE_* and found some other function modules too.
K_LINE_ITEM_CHECK
K_LINE_ITEM_APC_SIGN_GET
K_LINE_ITEM_GET_CONTEXT_MENU
K_LINE_ITEM_GET_TOOLBAR
K_LINE_ITEM_LOGICAL_KEY_GET
K_LINE_ITEM_TECH_SETTINGS_SET
K_LINE_ITEM_VALUE_TYPES_GET
K_LINE_ITEM_VALUE_TYPES_SET
K_LINE_ITEMS_ACT_GRID
K_LINE_ITEMS_SELECT
K_LINE_ITEMS_SELECT_AND_LIST
K_LINE_ITEM_ACT_CALL_WITH_DATA
K_LINE_ITEM_ACT_DATA_GET
K_LINE_ITEM_CM_CALL_WITH_DATA
K_LINE_ITEM_DEV_CALL_WITH_DATA
K_LINE_ITEM_PLN_CALL_WITH_DATA
K_LINE_ITEM_PROCESS_UCOMM_ACT
K_LINE_ITEM_STEERING_GET
Can anybody tell which FM should i use so that result i will get in an internal table?
or suggest any other methods
Thanks in Advance.
Lucky

I also had the same requirement and used function module K_LINE_ITEM_ACT_DATA_GET
this function is calling K_LINE_ITEMS_SELECT_AND_LIST function with I_NO_DISPLAY parameter
and returning the result.
Already they are in same function group,
I wrote this for future requirements of people after 4 years of this thread

750 to 1200 line items per order

Hi
Does any body have the experience of creating order with 750-1200 line items per order, in such scenario how the performance of the e-commerce was handled, was any custom development made to achieve.
please let us know
thanks
vignesh

Stefan, as stated, this was not well thought through solution (but with some work would be possible to achieve).
Regarding memory leaks. We have spent quite a bit of time looking in-depth at the shop code over the years and have so far seen very little evidence of actual memory leaks.
MASSIVE memory consumption, yes, definitely, but no actual leaks
If you have a suitable OS and JVM running that will allow you to crank up your JVM memory settings then you will most likely see that the memory usage will plateau...it might just be at a much higher level than you would have reasonably expected.
To give you an example. One of our customers was running a very large catalog (900 000 items) and the shop used 22 GB of memory when running. One of the main reasons in their case, with such a big catalog, was how the web shop chooses to create web cat items and cache them. Deep in the standard shop code you can find that there are lots and lots of ArrayLists initiated and they are all given a >0 default length, which consumes memory even when empty. In this particular case this became such a big issue that we sent SAP the proof that if they would initiate the ArrayLists with 0 length the memory consumption would drop significantly for each WebCatItem instance.
We estimated at the time after some in-place replacements of the CatalogAttributeValue, class out of the pcatAPI.jar where we set it by default to null instead of size of 10 that we would have saved about 40% of memory consumption. We even prepared the test case and sent it all to SAP, but don't think we ever got it implemented in standard code.
Another suggestion was that SAP would implement a LRU cache for catalog caching for larger catalogs....again would help with memory usage challenges.
With another customer we had 1 Million+ hits per business day (8 h period) and I can't remember us ever having to chase up memory leaks in the standard shop code...they might exist, but perhaps the usage scenarios I've been involved in have just not brought most of them to daylight.
Purely out of interest...if you have found memory leaks in the shop it would be interesting to hear where you found them.
Cheers
Kalle

S_ALR_87012993 Line items displaying problem

Hi everyone,
launching the report S_ALR_87012993 - Orders: Actual/Plan/Variance from period 4 to period 4 2007 I find a trouble on displaying line items of the order: the balance of internal order is corrected, in fact it's the balance of April, but when I enter in the order, the line items displayed have registration date in the year 2006, so that the line items amount is different from the one I expect.
Using the same user on another personal computer the problem doesn't occur.
Can anyone help me to detect the cause of the problem and to solve it?
Thank you so much,
Jesse

Hi,
The IP address is not relevant to the user.In a network,the user can log on with any system.Rather it is relevant to the Network and the system within this network.Thus every pc will have its own peculiar IP address.It is possible to place restrictions based on the IP address.
GUI is about interface;to my knowledge,GUI has no role in this context.It is possible,you have authorization restrictions here.
I suggest you to take the help of the technical guys in solving the problem.
Regards,
Ramesh.

Where is line item display order maintianed in document?

Similar Messages

Maybe you are looking for