WHere is Org unit stored from standard selection screen

I am using a report category HRBEN0004. I fill up org unit, but PNPORGEH is blank in my report.
Where does this Org unit get stored if I want to do something in the report based on selected org unit?
Thanks in adv.

Hi Shweta,
Use SE11 T-code in R/3 .Then give "PA0001" as the table name & click "display"..
Organization Unit is present in this table with field name as "ORGEH".
Regards,
Krishna Balaji T

Similar Messages

Issue In Providing 255 Charcters From The Selection Screen Select-Option

Dear Guru,
I am searching for table field with having length = 255 character.
which i want to use in select-option for proving data from the selection screen.
I have found the table myhlp and it associated field allvals which is having length = 255.
I am using it as below in my selection screen for the value to be provided 255 character long.
SELECTION-SCREEN : BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECT-OPTIONS   : s_mlbody FOR myhlp-allvals NO INTERVALS.
SELECTION-SCREEN : END OF BLOCK b3.
Now when i am going for the multiple selection option --> It is providing me the Multiple selection popup and giving me the provision of provide multiple line .
But the issue is that --> For a particular single value line in the popup i am able to enter only 45 charcters not 255 character.
But i need to put 255 charcter for particular line in a single value..
Please give me some guideline how resolve this or any other alternative way of reading the 255 charcter from the selection screen
Thanks & regards
Saifur Rahaman

Hi,
     As said by A@s selction screen with table control will be a good option.
design a custom screen with SUBSCREEN as screeen attribute using tcode se51.
For table control sample - go through Tcode ABAPDOCU - abap user dialogs-screens-complex screen- table control
Try Following,
REPORT Zsample .
controls: tc type tableview using screen 200.
parameters: p_user type myhlp-username.
data: begin of itab occurs 50,
      field1(255) type c,
      end of itab.
data: i_out type standard table of myhlp.
SELECTION-SCREEN BEGIN OF TABBED BLOCK MAX FOR 22 LINES.
SELECTION-SCREEN TAB (25) TABS1 USER-COMMAND UCOMM1
         DEFAULT SCREEN 200.
SELECTION-SCREEN END OF BLOCK MAX.
start-of-selection.
select * from myhlp into table i_out for all entries in itab
          where username eq p_user
                and allvals = itab-field1.
MODULE READ_ITAB INPUT.
insert itab index tc-current_line.
ENDMODULE.                 " READ_ITAB INPUT

Calling Adobe Interactive Form from a selection screen

Hi,
I have to design an interactive adobe form online scenario,it goes like this :
A certain tcode will call a selection screen when we enter values in the selection screen it will open an adobe form,which will have a submit button,on clicking the button data gets saved in a z table.
I will be designing the form in Web Dynpro,is it possible to call such a form through a selection screen?? Can someone please provide some idea on how to implement the above scenario.
Thanks !!

Hello,
for the online scenario you need a communication partner for the form. In WD, you have a partner to exchange the data with. But from a selection screen... who would be your partner? You can of course display a form, a PDF file, a new one (generated) or a uploaded/ stored one, you can even edit the fields, but you don´t have any partner to send the data to.
To cut this... you need a webservice if you want to exchange some data immediately (online scenario).
Regards Otto

Retrieve input values from the selection screen

I have a requirement to retrieve the variable value or values inputed from the selection screen and label the worksheet tab to replace the tab name 'Sheet1' from the Excel. The only way to do this would be to write a macro to label the sheets but how would I retrieve the value(s) from the selection screen criteria? Is the value of the selection screen entered by the user stored in some table? How would I write the macro to retrieve this value?
For example, I want to retrieve the company code entered from the selection screen and lets say the company code entered as 10; I would want to replace the worksheet from 'Sheet1' to '10' . Texts would be more recognizable.

Use the option Layout->Display Text Elements->Variables from the BEx toolbar. This will display Variable screen user input on your workbook in a fixed location. Then you can use your macro to name the worksheet with the cell reference.
Thanks
Vineet

Standard selection screen

Hi all,
I have written a Z program using LDB PNP. Usually we get a standard selection screen where in we enter begda and endda. However I am getting a different type of standard screen for selection when I execute it with KEYDATE on it. What do I have to do get standard selection screen with start date and end date on it.
Cheers,

Thanks for the response.
The report category field is blank.

Including User selection criteria along with LDB standard selection screen

Hi
While creating a HR report, along with the standard selection screen, if the cusomer requires some more fields to be added, How to retrive the data from the DB?
Is it the way to retrive the data based on Standard selection criteria from the LDB and then filter it based on user criteria or any other way?
Please help me out in this regard.
Thank you.

Yes thats the way. You get the data based on Selection screen of LDB (You can select Report Catogory you wish to) once you get data, You can put CHECK statement to see the data against PXXXX type to the filter value from you custom field on selection screen.

Button in standard selection screen...

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

then try to remove the button from there.

Difference between standard selection screen and selection screen

hi guyz,
im asking this because in the table D010SINF there are two fields sdate and idate which has different dates in it for some programs and same dates for some..bit confused:(
thanks

hi BrightSide
standard Selection means
suppose if you are using parameters means system defaultly generate one screen under the Screen Number 1000
Selection Screen means you are creating a screen using
stament SElection-Screen begin of screen 100..
this is the difference whatever the screen other than '1000' is selection Screen, where as 1000 is Standard Selection Screen
Regards
Deva

ESS-- Standard selection screens

Hello
which and where r the standard selection screen available for ESS/ HR in SAP-R3
thanks in advance
anup

Hi Anupam,
In ESS transactions created for webgui can be used directly and also Internet service files are created for them.
Some of the standard transactions which will be available in ESS are:
CATW: Record Time data
BWSP: Inbox
PZ01: Who's Who
check in transaction SE80 for internet services...these services/transactions will be available in ESS. Transactions for them will be generally of same name, can be checked in SE93 Transaction
Regards,
Varun

Add bottons on the application tool bar of the standard selection screen

Hi All,
I am having the standard selection screen in module pool programing. I wnat to add the bottons on the application tool bar of the standard selection screen.and hide the existing bottons (like std. execute and i bottons.)instead of these i want to give my won bottons like create and display.
pls help on this.

Hi Sridhar,
Try the Code below. It places two buttons on the selection-screen along with the execute button.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
            p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'FC01'.
      p_carrid = 'LH'.
      p_cityfr = 'Frankfurt'.
    WHEN 'FC02'.
      p_carrid = 'UA'.
      p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
Just go to the table sscrfields to knoe the fields in it. I think this clears the issue.
Regards,
Swapna.

How to manage obligatory parameters on standard selection screen.

Hi all,
How could I ensure settings some fields-parameters as obligatory on standard selection screen-dynpro1000. I would like to manage this according choosen block. On standard dynpro 1000 I have two blocks for two different selections. Checkboxes ensure which block of selection parameters I want to use. When I check first checkbox I need to set parameters in first block as obligatory and reversely in second block.
Thanks. zd.

Another example...
report zrich_0003.
selection-screen begin of block b1 with frame .
parameters: p_check1 as checkbox user-command chk.
parameters: p_fielda type c modif id gp1.
parameters: p_fieldb type c modif id gp1.
parameters: p_fieldc type c modif id gp1.
selection-screen end of block b1.
selection-screen begin of block b2 with frame .
parameters: p_check2 as checkbox user-command chk.
parameters: p_fieldd type c modif id gp2.
parameters: p_fielde type c modif id gp2.
parameters: p_fieldf type c modif id gp2.
selection-screen end of block b2.
at selection-screen output.
if p_check1 = 'X'.
    loop at screen.
      if screen-group1 = 'GP1'.
        screen-required = '1'.
        modify screen.
      endif.
    endloop.
else.
    loop at screen.
      if screen-group1 = 'GP1'.
        screen-required = '0'.
        modify screen.
      endif.
    endloop.
endif.
if p_check2 = 'X'.
    loop at screen.
      if screen-group1 = 'GP2'.
        screen-required = '1'.
        modify screen.
      endif.
    endloop.
else.
    loop at screen.
      if screen-group1 = 'GP2'.
        screen-required = '0'.
        modify screen.
      endif.
    endloop.
endif.
Regards,
Rich Heilman

Button on standard selection screen

HI experts , can any budy tell me , that, can we put a button on the standard selection screen , means on screen no 1000, PLease suggest ur ans, i have a requirement to create a button on the first selection screen by selection the check box on the standard selection screen , a button should be appear on the standard selection screen.
THanks in advance,
Rahul

Hello,
What do you mean by "but ur second concept is wrong we can set our own pf-status then how can u say that set the status".
Read again what I wrote! I said that the solution for your problem is to create a PF status of your own and that one will substitute the STANDARD one. This is the reason for having to insert the Execute (F8) button on it. Otherwise, if you don't insert it, you wont be able to execute your report.
Also, plz reply if u know the exect ans? this is not nice to say, specialy when the answer is correct. I've inserted buttons in standard selections screen lot's of times.
Regards.
Valter Oliveira.

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

Choosing a directory from the selection-screen

Hi,
regarding: select-options
There is a function module to choose a file (on value request F4) from the harddisc =>KD_GET_FILENAME_ON_F4
I want the user to choose his path(folder) from the selection screen.
Is there any function module to choose only the <b>directory(path) not the file</b>?
Thanks and Regards.

Hi Ashok,
You can alternatively do the following. Call the method of class CL_GUI_FRONTEND_SERVICES as follows.
Call Method CL_GUI_FRONTEND_SERVICES-->DIRECTORY_BROWSE
     Exporting
      WINDOW_TITLE    =
      INITIAL_FOLDER =
      SELECTED_FOLDER =
Hope this helps.
Please reward some points if it helps you.
Regards,
Amit M. Mishra

How to disable a standard selection screen of LDB?

Hi Friends,
My requirement is to disable a standard selection screen of a standard LDB and use my own Selection screen instead.How to go about it?.
Prompt replies would be rewarded.
Regards,
Tamilarasan.

Hi Tamilarasan,
U can hide LDB field, in the following way.
1.In tables statement remove the table name for the fields
you done require.
2.You can modify the screen fields. LOOP AT SCREEN
3.In the program attributes you can choose the SAP defined
selection screen if provided.
Add can add new field, in the following way,
1.If it is Customer program then as normal way like
SELECTION-SCREEN: BEGIN OF BLOCK 1
SELECT-OPTIONS:
SELECTION-SCREEN END OF BLOCK 1.
2. Goto SE36 and modify the selection views by creating 'CUS'.
All LBD will not have dynamic selection. If you want you can copy to Z* version and add the following statement to have dynamic selction
"SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE" XXXX
Regards,
Prabhu Rajesh.

WHere is Org unit stored from standard selection screen

Similar Messages

Maybe you are looking for